summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)Author
2008-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
2008-12-28Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (85 commits) [S390] provide documentation for hvc_iucv kernel parameter. [S390] convert ctcm printks to dev_xxx and pr_xxx macros. [S390] convert zfcp printks to pr_xxx macros. [S390] convert vmlogrdr printks to pr_xxx macros. [S390] convert zfcp dumper printks to pr_xxx macros. [S390] convert cpu related printks to pr_xxx macros. [S390] convert qeth printks to dev_xxx and pr_xxx macros. [S390] convert sclp printks to pr_xxx macros. [S390] convert iucv printks to dev_xxx and pr_xxx macros. [S390] convert ap_bus printks to pr_xxx macros. [S390] convert dcssblk and extmem printks messages to pr_xxx macros. [S390] convert monwriter printks to pr_xxx macros. [S390] convert s390 debug feature printks to pr_xxx macros. [S390] convert monreader printks to pr_xxx macros. [S390] convert appldata printks to pr_xxx macros. [S390] convert setup printks to pr_xxx macros. [S390] convert hypfs printks to pr_xxx macros. [S390] convert time printks to pr_xxx macros. [S390] convert cpacf printks to pr_xxx macros. [S390] convert cio printks to pr_xxx macros. ...
2008-12-28Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits) sched: fix warning in fs/proc/base.c schedstat: consolidate per-task cpu runtime stats sched: use RCU variant of list traversal in for_each_leaf_rt_rq() sched, cpuacct: export percpu cpuacct cgroup stats sched, cpuacct: refactoring cpuusage_read / cpuusage_write sched: optimize update_curr() sched: fix wakeup preemption clock sched: add missing arch_update_cpu_topology() call sched: let arch_update_cpu_topology indicate if topology changed sched: idle_balance() does not call load_balance_newidle() sched: fix sd_parent_degenerate on non-numa smp machine sched: add uid information to sched_debug for CONFIG_USER_SCHED sched: move double_unlock_balance() higher sched: update comment for move_task_off_dead_cpu sched: fix inconsistency when redistribute per-cpu tg->cfs_rq shares sched/rt: removed unneeded defintion sched: add hierarchical accounting to cpu accounting controller sched: include group statistics in /proc/sched_debug sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTER sched: clean up SCHED_CPUMASK_ALLOC ...
2008-12-25[S390] convert cpu related printks to pr_xxx macros.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert dcssblk and extmem printks messages to pr_xxx macros.Hongjie Yang
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert s390 debug feature printks to pr_xxx macros.Michael Holzheu
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert appldata printks to pr_xxx macros.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert setup printks to pr_xxx macros.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert hypfs printks to pr_xxx macros.Michael Holzheu
Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert time printks to pr_xxx macros.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert cpacf printks to pr_xxx macros.Jan Glauber
Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert cpcmd printks to pr_xxx macros.Christian Borntraeger
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] s390: Remove redundant testJulia Lawall
The loop above the modified code only terminates when rc is a valid pointer. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] s390/setup: set default preferred console device "ttyS"Hendrik Brueckner
This patch sets the default console device for s390. The console= kernel parameter can be still used to switch the preferred console to some other device. In that case, console messages are also printed on the default console device (ttyS0). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] panic_stack leak in smp_alloc_lowcoreMartin Schwidefsky
Fix freeing of the panic_stack if the allocation of async_stack failed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] clear_table inline assembly contraintsMartin Schwidefsky
Tell the compile that the clear_table inline assembly writes to the memory referenced by *s. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] Remove config options.Martin Schwidefsky
On s390 we always want to run with precise cputime accounting. Remove the config options VIRT_TIMER and VIRT_CPU_ACCOUNTING. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] cpu topology: remove dead codeHeiko Carstens
Interrupts haven't been implemented. So remove the dead code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] cpu topology: introduce kernel parameterHeiko Carstens
Introduce a topology=[on|off] kernel parameter which allows to switch cpu topology on/off. Default will be off, since it looks like that for some workloards this doesn't behave very well (on s390). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] add new machine types to setup_hwcaps.Martin Schwidefsky
Add the machine types for z9-bc, z10-ec and z10-bc to the elf_platform detection in setup_hwcaps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] Remove initial kernel stack backchain initialization.Heiko Carstens
Early init code clears the backchain of the initial kernel stack frame. This is not necessary since it is pre initialized with zeros. Plus it was broken on 64 bit since it cleared only four of eight bytes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] s390: use the new byteorder headersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] Add processor type march=z10 and a processor type safety check.Martin Schwidefsky
This patch adds the code generation option for IBM System z10 and adds a check in head[31,64].S to prevents the execution of a kernel compiled for a new processor type on an old machine. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] remove warnings with functions ending in BUGMartin Schwidefsky
Functions which end in a BUG() statement and skip the return statement cause compile warnings on s390, e.g.: mm/bootmem.c: In function 'mark_bootmem': mm/bootmem.c:321: warning: control reaches end of non-void function To avoid the warning add an endless loop to the BUG() macro. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] mark disabled_wait as noreturn functionHeiko Carstens
disabled_wait() won't return, so add an __attribute__((noreturn)). This will remove a false positive finding which our internal code checker reports. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] cio: update sac valuesPeter Oberparleiter
Values for the sac field have changed - update code accordingly. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] remove ptrace warning on 31 bit.Martin Schwidefsky
A kernel compile on 31 bit gives the following warnings in ptrace.c: arch/s390/kernel/ptrace.c: In function 'peek_user': arch/s390/kernel/ptrace.c:207: warning: unused variable 'dummy' arch/s390/kernel/ptrace.c: In function 'poke_user': arch/s390/kernel/ptrace.c:315: warning: unused variable 'dummy' Getting rid of the dummy variables removes the warnings. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] ftrace: function tracer backend for s390Heiko Carstens
This implements just the basic function tracer (_mcount) backend for s390. The dynamic variant will come later. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] service level interface.Martin Schwidefsky
Add a new proc interface /proc/service_levels that allows any code to report a relevant service level, e.g. the microcode level of devices, the service level of the hypervisor, etc. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] qdio: rework debug feature loggingJan Glauber
- make qdio_trace a per device view - remove s390dbf exceptions - remove CONFIG_QDIO_DEBUG, not needed anymore if we check for the level before calling sprintf - use snprintf for dbf entries - add start markers to see if the dbf view wrapped - add a global error view for all queues Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] qdio: fix qeth port count detectionJan Glauber
qeth needs to get the port count information before qdio has allocated a page for the chsc operation. Extend qdio_get_ssqd_desc() to store the data in the specified structure. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] zcrypt: Use of Thin InterruptsFelix Beck
When the machine supports AP adapter interrupts polling will be switched off at module initialization and the driver will work in interrupt mode. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] Move stfle to header file.Heiko Carstens
stfle will be needed by the ap_bus module to figure out wether the AP queue adapter interruption facility is installed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert s390 to generic IPI infrastructureHeiko Carstens
Since etr/stp don't need the old smp_call_function semantics anymore we can convert s390 to the generic IPI infrastructure. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] serialize stp/etr workMartin Schwidefsky
The work function dispatched with schedule_work() can be run twice on different cpus because run_workqueue clears the WORK_STRUCT_PENDING bit and then executes the function. Another cpu can call schedule_work() again and run the work function a second time before the first call is completed. This patch serialized the etr and stp work function with a mutex. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] convert etr/stp to stop_machine interfaceHeiko Carstens
This converts the etr and stp code to the new stop_machine interface which allows to synchronize all cpus without allocating any memory. This way we get rid of the only reason why we haven't converted s390 to the generic IPI interface yet. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] introduce vdso on s390Martin Schwidefsky
Add a vdso to speed up gettimeofday and clock_getres/clock_gettime for CLOCK_REALTIME/CLOCK_MONOTONIC. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] cpu topology: dont destroy cpu sets on topology changeHeiko Carstens
Call rebuild_sched_domains instead of arch_reinit_sched_domains if cpu topology changes. This leaves cpu sets alone which otherwise would be destroyed. If and how it makes sense to define cpu sets on a virtualized architecture is another question. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] audit: get s390 ret_from_fork in sync with other architecturesAl Viro
On s390 we have ret_from_fork jump not to the "do all work we normally do on return from syscall" as on x86, ppc, etc., but to the "do all such work except audit". Historical reasons - the codepath triggered when we have AUDIT process flag set is separated from the normall one and they converge at sysc_return, which is the common part of post-syscall work. And does not include calling audit_syscall_exit() - that's done in the end of sysc_tracesys path, just before that path jumps to sysc_return. IOW, the child returning from fork()/clone()/vfork() doesn't call audit_syscall_exit() at all, so no matter what we do with its audit context, we are not going to see the audit entry. The fix is simple: have ret_from_fork go to the point just past the call of sys_.... in the 'we have AUDIT flag set' path. There we have (64bit variant; for 31bit the situation is the same): sysc_tracenogo: tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) jz sysc_return la %r2,SP_PTREGS(%r15) # load pt_regs larl %r14,sysc_return # return point is sysc_return jg do_syscall_trace_exit which is precisely what we need - check the flag, bugger off to sysc_return if not set, otherwise call do_syscall_trace_exit() and bugger off to sysc_return. r9 has just been properly set by ret_from_fork itself, so we are fine. Tested on s390x, seems to work fine. WARNING: it's been about 16 years since my last contact with 3X0 assembler[1], so additional review would be very welcome. I don't think I've managed to screw it up, but... [1] that *was* in another country and besides, the box is dead... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25[S390] cpu topology: fix cpu_core_map initializationHeiko Carstens
Common code doesn't call arch_update_cpu_topology() anymore on cpu hotplug. But our architecture backend relied on that in order to update the cpu_core_map. For machines without cpu topology support this leads uninitialized cpu_core_maps for later on added cpus. To solve this just initialize the maps with cpu_possible_map, since that will be always valid for machines without topology support. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-12sched: let arch_update_cpu_topology indicate if topology changedHeiko Carstens
Change arch_update_cpu_topology so it returns 1 if the cpu topology changed and 0 if it didn't change. This will be useful for the next patch which adds a call to this function in partition_sched_domains. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04Merge branch 'master' into nextJames Morris
Conflicts: fs/nfsd/nfs4recover.c Manually fixed above to use new creds API functions, e.g. nfs4_save_creds(). Signed-off-by: James Morris <jmorris@namei.org>
2008-12-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/ixgbe/ixgbe_main.c drivers/net/smc91x.c
2008-12-02Merge branch 'kvm-updates/2.6.28' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'kvm-updates/2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: MMU: avoid creation of unreachable pages in the shadow KVM: ppc: stop leaking host memory on VM exit KVM: MMU: fix sync of ptes addressed at owner pagetable KVM: ia64: Fix: Use correct calling convention for PAL_VPS_RESUME_HANDLER KVM: ia64: Fix incorrect kbuild CFLAGS override KVM: VMX: Fix interrupt loss during race with NMI KVM: s390: Fix problem state handling in guest sigp handler
2008-11-30Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] Fix alignment of initial kernel stack. [S390] pgtable.h: Fix oops in unmap_vmas for KVM processes [S390] fix/cleanup sched_clock [S390] fix system call parameter functions.
2008-11-30remove __ARCH_WANT_COMPAT_SYS_PTRACEChristoph Hellwig
All architectures now use the generic compat_sys_ptrace, as should every new architecture that needs 32bit compat (if we'll ever get another). Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also kill a comment about __ARCH_SYS_PTRACE that was added after __ARCH_SYS_PTRACE was already gone. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-27[S390] Update default configuration.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-27[S390] Fix alignment of initial kernel stack.Heiko Carstens
We need an alignment of 16384 bytes for the initial kernel stack if the kernel is configured for 16384 bytes stacks but the linker script currently guarantees only an alignment of 8192 bytes. So fix this and simply use THREAD_SIZE as alignment value which will always do the right thing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-27[S390] pgtable.h: Fix oops in unmap_vmas for KVM processesChristian Borntraeger
When running several kvm processes with lots of memory overcommitment, we have seen an oops during process shutdown: ------------[ cut here ]------------ Kernel BUG at 0000000000193434 [verbose debug info unavailable] addressing exception: 0005 [#1] PREEMPT SMP Modules linked in: kvm sunrpc qeth_l2 dm_mod qeth ccwgroup CPU: 10 Not tainted 2.6.28-rc4-kvm-bigiron-00521-g0ccca08-dirty #8 Process kuli (pid: 14460, task: 0000000149822338, ksp: 0000000024f57650) Krnl PSW : 0704e00180000000 0000000000193434 (unmap_vmas+0x884/0xf10) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3 Krnl GPRS: 0000000000000002 0000000000000000 000000051008d000 000003e05e6034e0 00000000001933f6 00000000000001e9 0000000407259e0a 00000002be88c400 00000200001c1000 0000000407259608 0000000407259e08 0000000024f577f0 0000000407259e09 0000000000445fa8 00000000001933f6 0000000024f577f0 Krnl Code: 0000000000193426: eb22000c000d sllg %r2,%r2,12 000000000019342c: a7180000 lhi %r1,0 0000000000193430: b2290012 iske %r1,%r2 >0000000000193434: a7110002 tmll %r1,2 0000000000193438: a7840006 brc 8,193444 000000000019343c: 9602c000 oi 0(%r12),2 0000000000193440: 96806000 oi 0(%r6),128 0000000000193444: a7110004 tmll %r1,4 Call Trace: ([<00000000001933f6>] unmap_vmas+0x846/0xf10) [<0000000000199680>] exit_mmap+0x210/0x458 [<000000000012a8f8>] mmput+0x54/0xfc [<000000000012f714>] exit_mm+0x134/0x144 [<000000000013120c>] do_exit+0x240/0x878 [<00000000001318dc>] do_group_exit+0x98/0xc8 [<000000000013e6b0>] get_signal_to_deliver+0x30c/0x358 [<000000000010bee0>] do_signal+0xec/0x860 [<0000000000112e30>] sysc_sigpending+0xe/0x22 [<000002000013198a>] 0x2000013198a INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000000001a68d0>] free_swap_and_cache+0x1a0/0x1a4 <4>---[ end trace bc19f1d51ac9db7c ]--- The faulting instruction is the storage key operation (iske) in ptep_rcp_copy (called by pte_clear, called by unmap_vmas). iske reads dirty and reference bit information for a physical page and requires a valid physical address. Since we are in pte_clear, we cannot rely on the pte containing a valid address. Fortunately we dont need these information in pte_clear - after all there is no mapping. The best fix is to remove the needless call to ptep_rcp_copy that contains the iske. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-27[S390] fix/cleanup sched_clockChristian Borntraeger
CONFIG_PRINTK_TIME reveals that sched_clock has a wrong offset during boot: .. [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775679 [ 0.000000] Kernel command line: dasd=4b6c root=/dev/dasda1 ro noinitrd [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [6920575.975232] console [ttyS0] enabled [6920575.987586] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [6920575.991404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) .. The s390 implementation of sched_clock uses the store clock instruction and subtracts jiffies_timer_cc. jiffies_timer_cc is a local variable in arch/s390/kernel/time.c and only used for sched_clock and monotonic clock. For historical reasons there is an offset on that value. With todays code this offset is unnecessary. By removing that offset we can get a sched_clock which returns the nanoseconds after time_init. This improves CONFIG_PRINTK_TIME. Since sched_clock is the only user, I have also renamed jiffies_timer_cc to sched_clock_base_cc. In addition, the local variable init_timer_cc is redundant and can be romved as well. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 12:12:56 +0000