summaryrefslogtreecommitdiff
path: root/arch/s390/pci
AgeCommit message (Collapse)Author
2020-04-04Merge tag 's390-5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...
2020-03-23s390/pci: Improve handling of unset UIDNiklas Schnelle
When UID checking is enabled a UID value of 0 is invalid and can not be set by the user. On z/VM it is however used to indicate an unset UID. Until now, this lead to the behavior that one PCI function could be attached with UID 0 after which z/VM would prohibit further attachment. Now if the user then turns off UID checking in z/VM the user could seemingly attach additional PCI functions that would however not show up in Linux as that would not be informed of the change in UID checking mode. This is unexpected and confusing and lead to bug reports against Linux. Instead now, if we encounter an unset UID value of 0 treat it as indicating that UID checking was turned off, switch to automatic domain allocation, and warn the user of the possible misconfiguration. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390/pci: Fix zpci_alloc_domain() over allocationNiklas Schnelle
Until now zpci_alloc_domain() only prevented more than CONFIG_PCI_NR_FUNCTIONS from being added when using automatic domain allocation. When explicit UIDs were defined UIDs above CONFIG_PCI_NR_FUNCTIONS were not counted at all. When more PCI functions are added this could lead to various errors including under sized IRQ vectors and similar issues. Fix this by explicitly tracking the number of allocated domains. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-23s390: remove broken hibernate / power management supportHeiko Carstens
Hibernation is known to be broken for many years on s390. Given that there aren't any real use cases, remove the code instead of spending time to fix and maintain it. Without hibernate support it doesn't make too much sense to keep power management support; therefore remove it completely. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-04s390/pci: Fix unexpected write combine on resourceNiklas Schnelle
In the initial MIO support introduced in commit 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") zpci_map_resource() and zpci_setup_resources() default to using the mio_wb address as the resource's start address. This means users of the mapping, which includes most drivers, will get write combining on PCI Stores. This may lead to problems when drivers expect write through behavior when not using an explicit ioremap_wc(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-22s390/pci: Fix possible deadlock in recover_store()Niklas Schnelle
With zpci_disable() working, lockdep detected a potential deadlock (lockdep output at the end). The deadlock is between recovering a PCI function via the /sys/bus/pci/devices/<dev>/recover attribute vs powering it off via /sys/bus/pci/slots/<slot>/power. The fix is analogous to the changes in commit 0ee223b2e1f6 ("scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock") that fixed a potential deadlock on removing a SCSI device via sysfs. [ 204.830107] ====================================================== [ 204.830109] WARNING: possible circular locking dependency detected [ 204.830111] 5.5.0-rc2-06072-gbc03ecc9a672 #6 Tainted: G W [ 204.830112] ------------------------------------------------------ [ 204.830113] bash/1034 is trying to acquire lock: [ 204.830115] 0000000192a1a610 (kn->count#200){++++}, at: kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830122] but task is already holding lock: [ 204.830123] 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830128] which lock already depends on the new lock. [ 204.830129] the existing dependency chain (in reverse order) is: [ 204.830130] -> #1 (pci_rescan_remove_lock){+.+.}: [ 204.830134] validate_chain+0x93a/0xd08 [ 204.830136] __lock_acquire+0x4ae/0x9d0 [ 204.830137] lock_acquire+0x114/0x280 [ 204.830140] __mutex_lock+0xa2/0x960 [ 204.830142] mutex_lock_nested+0x32/0x40 [ 204.830145] recover_store+0x4c/0xa8 [ 204.830147] kernfs_fop_write+0xe6/0x218 [ 204.830151] vfs_write+0xb0/0x1b8 [ 204.830152] ksys_write+0x6c/0xf8 [ 204.830154] system_call+0xd8/0x2d8 [ 204.830155] -> #0 (kn->count#200){++++}: [ 204.830187] check_noncircular+0x1e6/0x240 [ 204.830189] check_prev_add+0xfc/0xdb0 [ 204.830190] validate_chain+0x93a/0xd08 [ 204.830192] __lock_acquire+0x4ae/0x9d0 [ 204.830193] lock_acquire+0x114/0x280 [ 204.830194] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830196] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830198] remove_files.isra.0+0x4c/0x98 [ 204.830199] sysfs_remove_group+0x66/0xc8 [ 204.830201] sysfs_remove_groups+0x46/0x68 [ 204.830204] device_remove_attrs+0x52/0x90 [ 204.830207] device_del+0x182/0x418 [ 204.830208] pci_remove_bus_device+0x8a/0x130 [ 204.830210] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830212] disable_slot+0x68/0x100 [ 204.830213] power_write_file+0x7c/0x130 [ 204.830215] kernfs_fop_write+0xe6/0x218 [ 204.830217] vfs_write+0xb0/0x1b8 [ 204.830218] ksys_write+0x6c/0xf8 [ 204.830220] system_call+0xd8/0x2d8 [ 204.830221] other info that might help us debug this: [ 204.830223] Possible unsafe locking scenario: [ 204.830224] CPU0 CPU1 [ 204.830225] ---- ---- [ 204.830226] lock(pci_rescan_remove_lock); [ 204.830227] lock(kn->count#200); [ 204.830229] lock(pci_rescan_remove_lock); [ 204.830231] lock(kn->count#200); [ 204.830233] *** DEADLOCK *** [ 204.830234] 4 locks held by bash/1034: [ 204.830235] #0: 00000001b6fbc498 (sb_writers#4){.+.+}, at: vfs_write+0x158/0x1b8 [ 204.830239] #1: 000000018c9f5090 (&of->mutex){+.+.}, at: kernfs_fop_write+0xaa/0x218 [ 204.830242] #2: 00000001f7da0810 (kn->count#235){.+.+}, at: kernfs_fop_write+0xb6/0x218 [ 204.830245] #3: 00000000c16134a8 (pci_rescan_remove_lock){+.+.}, at: pci_stop_and_remove_bus_device_locked+0x26/0x48 [ 204.830248] stack backtrace: [ 204.830250] CPU: 2 PID: 1034 Comm: bash Tainted: G W 5.5.0-rc2-06072-gbc03ecc9a672 #6 [ 204.830252] Hardware name: IBM 8561 T01 703 (LPAR) [ 204.830253] Call Trace: [ 204.830257] [<00000000c05e10c0>] show_stack+0x88/0xf0 [ 204.830260] [<00000000c112dca4>] dump_stack+0xa4/0xe0 [ 204.830261] [<00000000c0694c06>] check_noncircular+0x1e6/0x240 [ 204.830263] [<00000000c0695bec>] check_prev_add+0xfc/0xdb0 [ 204.830264] [<00000000c06971da>] validate_chain+0x93a/0xd08 [ 204.830266] [<00000000c06994c6>] __lock_acquire+0x4ae/0x9d0 [ 204.830267] [<00000000c069867c>] lock_acquire+0x114/0x280 [ 204.830269] [<00000000c09ca15c>] __kernfs_remove.part.0+0x2e4/0x360 [ 204.830270] [<00000000c09cb5c4>] kernfs_remove_by_name_ns+0x5c/0xa8 [ 204.830272] [<00000000c09cee14>] remove_files.isra.0+0x4c/0x98 [ 204.830274] [<00000000c09cf2ae>] sysfs_remove_group+0x66/0xc8 [ 204.830276] [<00000000c09cf356>] sysfs_remove_groups+0x46/0x68 [ 204.830278] [<00000000c0e3dfe2>] device_remove_attrs+0x52/0x90 [ 204.830280] [<00000000c0e40382>] device_del+0x182/0x418 [ 204.830281] [<00000000c0dcfd7a>] pci_remove_bus_device+0x8a/0x130 [ 204.830283] [<00000000c0dcfe92>] pci_stop_and_remove_bus_device_locked+0x3a/0x48 [ 204.830285] [<00000000c0de7190>] disable_slot+0x68/0x100 [ 204.830286] [<00000000c0de6514>] power_write_file+0x7c/0x130 [ 204.830288] [<00000000c09cc846>] kernfs_fop_write+0xe6/0x218 [ 204.830290] [<00000000c08f3480>] vfs_write+0xb0/0x1b8 [ 204.830291] [<00000000c08f378c>] ksys_write+0x6c/0xf8 [ 204.830293] [<00000000c1154374>] system_call+0xd8/0x2d8 [ 204.830294] INFO: lockdep is turned off. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-01-22s390/pci: Recover handle in clp_set_pci_fn()Niklas Schnelle
When we try to recover a PCI function using echo 1 > /sys/bus/pci/devices/<id>/recover or manually with echo 1 > /sys/bus/pci/devices/<id>/remove echo 0 > /sys/bus/pci/slots/<slot>/power echo 1 > /sys/bus/pci/slots/<slot>/power clp_disable_fn() / clp_enable_fn() call clp_set_pci_fn() to first disable and then reenable the function. When the function is already in the requested state we may be left with an invalid function handle. To get a new valid handle we do a clp_list_pci() call. For this we need both the function ID and function handle in clp_set_pci_fn() so pass the zdev and get both. To simplify things also pull setting the refreshed function handle into clp_set_pci_fn() Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-12-03Merge tag 'pci-v5.5-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Warn if a host bridge has no NUMA info (Yunsheng Lin) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) Resource management: - Fix boot-time Embedded Controller GPE storm caused by incorrect resource assignment after ACPI Bus Check Notification (Mika Westerberg) - Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) - Consolidate DT "dma-ranges" parsing and convert all host drivers to use shared parsing (Rob Herring) Error reporting: - Restore AER capability after resume (Mayurkumar Patel) - Add PoisonTLPBlocked AER counter (Rajat Jain) - Use for_each_set_bit() to simplify AER code (Andy Shevchenko) - Fix AER kernel-doc (Andy Shevchenko) - Add "pcie_ports=dpc-native" parameter to allow native use of DPC even if platform didn't grant control over AER (Olof Johansson) Hotplug: - Avoid returning prematurely from sysfs requests to enable or disable a PCIe hotplug slot (Lukas Wunner) - Don't disable interrupts twice when suspending hotplug ports (Mika Westerberg) - Fix deadlocks when PCIe ports are hot-removed while suspended (Mika Westerberg) Power management: - Remove unnecessary ASPM locking (Bjorn Helgaas) - Add support for disabling L1 PM Substates (Heiner Kallweit) - Allow re-enabling Clock PM after it has been disabled (Heiner Kallweit) - Add sysfs attributes for controlling ASPM link states (Heiner Kallweit) - Remove CONFIG_PCIEASPM_DEBUG, including "link_state" and "clk_ctl" sysfs files (Heiner Kallweit) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Move power state check out of pci_msi_supported() (Bjorn Helgaas) - Fix incorrect MSI-X masking on resume and revert related nvme quirk for Kingston NVME SSD running FW E8FK11.T (Jian-Hong Pan) - Always return devices to D0 when thawing to fix hibernation with drivers like mlx4 that used legacy power management (previously we only did it for drivers with new power management ops) (Dexuan Cui) - Clear PCIe PME Status even for legacy power management (Bjorn Helgaas) - Fix PCI PM documentation errors (Bjorn Helgaas) - Use dev_printk() for more power management messages (Bjorn Helgaas) - Apply D2 delay as milliseconds, not microseconds (Bjorn Helgaas) - Convert xen-platform from legacy to generic power management (Bjorn Helgaas) - Removed unused .resume_early() and .suspend_late() legacy power management hooks (Bjorn Helgaas) - Rearrange power management code for clarity (Rafael J. Wysocki) - Decode power states more clearly ("4" or "D4" really refers to "D3cold") (Bjorn Helgaas) - Notice when reading PM Control register returns an error (~0) instead of interpreting it as being in D3hot (Bjorn Helgaas) - Add missing link delays required by the PCIe spec (Mika Westerberg) Virtualization: - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Unify ACS quirk implementations (Bjorn Helgaas) Amlogic Meson host bridge driver: - Fix meson PERST# GPIO polarity problem (Remi Pommarel) - Add DT bindings for Amlogic Meson G12A (Neil Armstrong) - Fix meson clock names to match DT bindings (Neil Armstrong) - Add meson support for Amlogic G12A SoC with separate shared PHY (Neil Armstrong) - Add meson extended PCIe PHY functions for Amlogic G12A USB3+PCIe combo PHY (Neil Armstrong) - Add arm64 DT for Amlogic G12A PCIe controller node (Neil Armstrong) - Add commented-out description of VIM3 USB3/PCIe mux in arm64 DT (Neil Armstrong) Broadcom iProc host bridge driver: - Invalidate iProc PAXB address mapping before programming it (Abhishek Shah) - Fix iproc-msi and mvebu __iomem annotations (Ben Dooks) Cadence host bridge driver: - Refactor Cadence PCIe host controller to use as a library for both host and endpoint (Tom Joseph) Freescale Layerscape host bridge driver: - Add layerscape LS1028a support (Xiaowei Bao) Intel VMD host bridge driver: - Add VMD bus 224-255 restriction decode (Jon Derrick) - Add VMD 8086:9A0B device ID (Jon Derrick) - Remove Keith from VMD maintainer list (Keith Busch) Marvell ARMADA 3700 / Aardvark host bridge driver: - Use LTSSM state to build link training flag since Aardvark doesn't implement the Link Training bit (Remi Pommarel) - Delay before training Aardvark link in case PERST# was asserted before the driver probe (Remi Pommarel) - Fix Aardvark issues with Root Control reads and writes (Remi Pommarel) - Don't rely on jiffies in Aardvark config access path since interrupts may be disabled (Remi Pommarel) - Fix Aardvark big-endian support (Grzegorz Jaszczyk) Marvell ARMADA 370 / XP host bridge driver: - Make mvebu_pci_bridge_emul_ops static (Ben Dooks) Microsoft Hyper-V host bridge driver: - Add hibernation support for Hyper-V virtual PCI devices (Dexuan Cui) - Track Hyper-V pci_protocol_version per-hbus, not globally (Dexuan Cui) - Avoid kmemleak false positive on hv hbus buffer (Dexuan Cui) Mobiveil host bridge driver: - Change mobiveil csr_read()/write() function names that conflict with riscv arch functions (Kefeng Wang) NVIDIA Tegra host bridge driver: - Fix Tegra CLKREQ dependency programming (Vidya Sagar) Renesas R-Car host bridge driver: - Remove unnecessary header include from rcar (Andrew Murray) - Tighten register index checking for rcar inbound range programming (Marek Vasut) - Fix rcar inbound range alignment calculation to improve packing of multiple entries (Marek Vasut) - Update rcar MACCTLR setting to match documentation (Yoshihiro Shimoda) - Clear bit 0 of MACCTLR before PCIETCTLR.CFINIT per manual (Yoshihiro Shimoda) - Add Marek Vasut and Yoshihiro Shimoda as R-Car maintainers (Simon Horman) Rockchip host bridge driver: - Make rockchip 0V9 and 1V8 power regulators non-optional (Robin Murphy) Socionext UniPhier host bridge driver: - Set uniphier to host (RC) mode always (Kunihiko Hayashi) Endpoint drivers: - Fix endpoint driver sign extension problem when shifting page number to phys_addr_t (Alan Mikhak) Misc: - Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) - Remove unused pci_irq_get_node() Greg Kroah-Hartman) - Make asm/msi.h mandatory and simplify PCI_MSI_IRQ_DOMAIN Kconfig (Palmer Dabbelt, Michal Simek) - Read all 64 bits of Switchtec part_event_bitmap (Logan Gunthorpe) - Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Fix bridge emulation big-endian support (Grzegorz Jaszczyk) - Fix dwc find_next_bit() usage (Niklas Cassel) - Fix pcitest.c fd leak (Hewenliang) - Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski)" * tag 'pci-v5.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (160 commits) PCI: Remove PCI_MSI_IRQ_DOMAIN architecture whitelist asm-generic: Make msi.h a mandatory include/asm header Revert "nvme: Add quirk for Kingston NVME SSD running FW E8FK11.T" PCI/MSI: Fix incorrect MSI-X masking on resume PCI/MSI: Move power state check out of pci_msi_supported() PCI/MSI: Remove unused pci_irq_get_node() PCI: hv: Avoid a kmemleak false positive caused by the hbus buffer PCI: hv: Change pci_protocol_version to per-hbus PCI: hv: Add hibernation support PCI: hv: Reorganize the code in preparation of hibernation MAINTAINERS: Remove Keith from VMD maintainer PCI/ASPM: Remove PCIEASPM_DEBUG Kconfig option and related code PCI/ASPM: Add sysfs attributes for controlling ASPM link states PCI: Fix indentation drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() PCI: uniphier: Set mode register to host mode drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions ...
2019-11-30s390/pci: add error message on device number limitNiklas Schnelle
The config option CONFIG_PCI_NR_FUNCTIONS sets a limit on the number of PCI functions we can support. Previously on reaching this limit there was no indication why newly attached devices are not recognized by Linux which could be quite confusing. Thus this patch adds a pr_err() for this case. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-30s390/pci: add error message for UID collisionNiklas Schnelle
When UID checking was turned off during runtime in the underlying hypervisor, a PCI device may be attached with the same UID. This is already detected but happens silently. Add an error message so it can more easily be understood why a device was not added. Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-10-14PCI: Add PCI_STD_NUM_BARS for the number of standard BARsDenis Efremov
Code that iterates over all standard PCI BARs typically uses PCI_STD_RESOURCE_END. However, that requires the unusual test "i <= PCI_STD_RESOURCE_END" rather than something the typical "i < PCI_STD_NUM_BARS". Add a definition for PCI_STD_NUM_BARS and change loops to use the more idiomatic C style to help avoid fencepost errors. Link: https://lore.kernel.org/r/20190927234026.23342-1-efremov@linux.com Link: https://lore.kernel.org/r/20190927234308.23935-1-efremov@linux.com Link: https://lore.kernel.org/r/20190916204158.6889-3-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Ott <sebott@linux.ibm.com> # arch/s390/ Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> # video/fbdev/ Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> # pci/controller/dwc/ Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> # scsi/pm8001/ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> # scsi/pm8001/ Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # memstick/
2019-10-04s390/pci: mark function(s) __always_inlineHeiko Carstens
Always inline asm inlines with variable operands for "i" constraints, since they won't compile if the compiler would decide to not inline them. Reported-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-19Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...
2019-09-16s390/pci: fix MSI message dataSebastian Ott
After recent changes the MSI message data needs to specify the function-relative IRQ number. Reported-and-tested-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-09-04dma-mapping: explicitly wire up ->mmap and ->get_sgtableChristoph Hellwig
While the default ->mmap and ->get_sgtable implementations work for the majority of our dma_map_ops impementations they are inherently safe for others that don't use the page allocator or CMA and/or use their own way of remapping not covered by the common code. So remove the defaults if these methods are not wired up, but instead wire up the default implementations for all safe instances. Fixes: e1c7e324539a ("dma-mapping: always provide the dma_map_ops based implementation") Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-08-29s390/pci: avoid using strncmp with hardcoded lengthVasily Gorbik
Command line option values passed to __setup callbacks are always null-terminated and "s390_iommu=" may only accept "strict" as value. So replace strncmp with strcmp. While at it also make s390_iommu_setup return 1, which means this command line option is handled by this callback. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-08-21s390/pci: PCI_IOV_RESOURCES loop refactoring in zpci_map_resourcesDenis Efremov
This patch alters the for loop iteration scheme in zpci_map_resources to make it more usual. Thus, the patch generalizes the style for PCI_IOV_RESOURCES iteration and improves readability. Link: http://lkml.kernel.org/r/20190806160137.29275-1-efremov@linux.com Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-12Merge tag 's390-5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: - Fix integer overflow during stack frame unwind with invalid backchain. - Cleanup unused symbol export in zcrypt code. - Fix MIO addressing control activation in PCI code and expose its usage via sysfs. - Fix kernel image signature verification report presence detection. - Fix irq registration in vfio-ap code. - Add CPU measurement counters for newer machines. - Add base DASD thin provisioning support and code cleanups. * tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/unwind: avoid int overflow in outside_of_stack s390/zcrypt: remove the exporting of ap_query_configuration s390/pci: add mio_enabled attribute s390: fix setting of mio addressing control s390/ipl: Fix detection of has_secure attribute s390: vfio-ap: fix irq registration s390/cpumf: Add extended counter set definitions for model 8561 and 8562 s390/dasd: Handle out-of-space constraint s390/dasd: Add discard support for ESE volumes s390/dasd: Use ALIGN_DOWN macro s390/dasd: Make dasd_setup_queue() a discipline function s390/dasd: Add new ioctl to release space s390/dasd: Add dasd_sleep_on_queue_interruptible() s390/dasd: Add missing intensity definition s390/dasd: Fix whitespace s390/dasd: Add dynamic formatting support for ESE volumes s390/dasd: Recognise data for ESE volumes s390/dasd: Put sub-order definitions in a separate section s390/dasd: Make layout analysis ESE compatible s390/dasd: Remove old defines and function ...
2019-07-11s390/pci: add mio_enabled attributeSebastian Ott
Provide an attribute to query the usage of mio instructions. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390: fix setting of mio addressing controlSebastian Ott
Move enablement of mio addressing control from detect_machine_facilities to pci_base_init. detect_machine_facilities runs so early that the static branches have not been toggled yet, thus mio addressing control was always off. In pci_base_init we have to use the SMP aware ctl_set_bit though. Fixes: 833b441ec0f6 ("s390: enable processes for mio instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-08Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle are: - rwsem scalability improvements, phase #2, by Waiman Long, which are rather impressive: "On a 2-socket 40-core 80-thread Skylake system with 40 reader and writer locking threads, the min/mean/max locking operations done in a 5-second testing window before the patchset were: 40 readers, Iterations Min/Mean/Max = 1,807/1,808/1,810 40 writers, Iterations Min/Mean/Max = 1,807/50,344/151,255 After the patchset, they became: 40 readers, Iterations Min/Mean/Max = 30,057/31,359/32,741 40 writers, Iterations Min/Mean/Max = 94,466/95,845/97,098" There's a lot of changes to the locking implementation that makes it similar to qrwlock, including owner handoff for more fair locking. Another microbenchmark shows how across the spectrum the improvements are: "With a locking microbenchmark running on 5.1 based kernel, the total locking rates (in kops/s) on a 2-socket Skylake system with equal numbers of readers and writers (mixed) before and after this patchset were: # of Threads Before Patch After Patch ------------ ------------ ----------- 2 2,618 4,193 4 1,202 3,726 8 802 3,622 16 729 3,359 32 319 2,826 64 102 2,744" The changes are extensive and the patch-set has been through several iterations addressing various locking workloads. There might be more regressions, but unless they are pathological I believe we want to use this new implementation as the baseline going forward. - jump-label optimizations by Daniel Bristot de Oliveira: the primary motivation was to remove IPI disturbance of isolated RT-workload CPUs, which resulted in the implementation of batched jump-label updates. Beyond the improvement of the real-time characteristics kernel, in one test this patchset improved static key update overhead from 57 msecs to just 1.4 msecs - which is a nice speedup as well. - atomic64_t cross-arch type cleanups by Mark Rutland: over the last ~10 years of atomic64_t existence the various types used by the APIs only had to be self-consistent within each architecture - which means they became wildly inconsistent across architectures. Mark puts and end to this by reworking all the atomic64 implementations to use 's64' as the base type for atomic64_t, and to ensure that this type is consistently used for parameters and return values in the API, avoiding further problems in this area. - A large set of small improvements to lockdep by Yuyang Du: type cleanups, output cleanups, function return type and othr cleanups all around the place. - A set of percpu ops cleanups and fixes by Peter Zijlstra. - Misc other changes - please see the Git log for more details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (82 commits) locking/lockdep: increase size of counters for lockdep statistics locking/atomics: Use sed(1) instead of non-standard head(1) option locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING x86/jump_label: Make tp_vec_nr static x86/percpu: Optimize raw_cpu_xchg() x86/percpu, sched/fair: Avoid local_clock() x86/percpu, x86/irq: Relax {set,get}_irq_regs() x86/percpu: Relax smp_processor_id() x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}() locking/rwsem: Guard against making count negative locking/rwsem: Adaptive disabling of reader optimistic spinning locking/rwsem: Enable time-based spinning on reader-owned rwsem locking/rwsem: Make rwsem->owner an atomic_long_t locking/rwsem: Enable readers spinning on writer locking/rwsem: Clarify usage of owner's nonspinaable bit locking/rwsem: Wake up almost all readers in wait queue locking/rwsem: More optimal RT task handling of null owner locking/rwsem: Always release wait_lock before waking up tasks locking/rwsem: Implement lock handoff to prevent lock starvation locking/rwsem: Make rwsem_spin_on_owner() return owner state ...
2019-07-04s390/pci: correctly handle MIO opt-outSebastian Ott
Do not issue CLP_SET_ENABLE_MIO after opting out of MIO instruction usage. This should not fix a bug but reduce overhead within firmware. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-04s390/pci: deal with devices that have no support for MIO instructionsSebastian Ott
Unfortunately we have to handle a class of devices that don't support the new MIO instructions. Adjust resource assignment and mapping accordingly. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-06-03locking/atomic, s390/pci: Remove redundant castsMark Rutland
Now that atomic64_read() returns s64 consistently, we don't need to explicitly cast its return value. Drop the redundant casts. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: aou@eecs.berkeley.edu Cc: arnd@arndb.de Cc: bp@alien8.de Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: fenghua.yu@intel.com Cc: herbert@gondor.apana.org.au Cc: ink@jurassic.park.msu.ru Cc: jhogan@kernel.org Cc: linux@armlinux.org.uk Cc: mattst88@gmail.com Cc: mpe@ellerman.id.au Cc: palmer@sifive.com Cc: paul.burton@mips.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: tony.luck@intel.com Cc: vgupta@synopsys.com Link: https://lkml.kernel.org/r/20190522132250.26499-19-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-03locking/atomic, s390/pci: Prepare for atomic64_read() conversionMark Rutland
The return type of atomic64_read() varies by architecture. It may return long (e.g. powerpc), long long (e.g. arm), or s64 (e.g. x86_64). This is somewhat painful, and mandates the use of explicit casts in some cases (e.g. when printing the return value). To ameliorate matters, subsequent patches will make the atomic64 API consistently use s64. As a preparatory step, this patch updates the s390 pci debug code to treat the return value of atomic64_read() as s64, using an explicit cast. This cast will be removed once the s64 conversion is complete. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: aou@eecs.berkeley.edu Cc: arnd@arndb.de Cc: bp@alien8.de Cc: catalin.marinas@arm.com Cc: davem@davemloft.net Cc: fenghua.yu@intel.com Cc: herbert@gondor.apana.org.au Cc: ink@jurassic.park.msu.ru Cc: jhogan@kernel.org Cc: linux@armlinux.org.uk Cc: mattst88@gmail.com Cc: mpe@ellerman.id.au Cc: palmer@sifive.com Cc: paul.burton@mips.com Cc: paulus@samba.org Cc: ralf@linux-mips.org Cc: rth@twiddle.net Cc: tony.luck@intel.com Cc: vgupta@synopsys.com Link: https://lkml.kernel.org/r/20190522132250.26499-3-mark.rutland@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-28s390/pci: fix assignment of bus resourcesSebastian Ott
Adjust bus resources depending on the usage of MIO instructions. Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-05-28s390/pci: fix struct definition for set PCI functionSebastian Ott
Recent firmware will store PCI MIO information also when enabling MIO instructions via set PCI function. We do not use this information but currently calling enable MIO will fail because of insufficient response block length. Fix this by putting a struct mio_info at the end of the affected response block struct. Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2019-04-29s390/pci: add parameter to disable usage of MIO instructionsSebastian Ott
Allow users to disable usage of MIO instructions by specifying pci=nomio at the kernel command line. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: provide support for MIO instructionsSebastian Ott
Provide support for PCI I/O instructions that work on mapped IO addresses. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: move io address mapping code to pci_insn.cSebastian Ott
This is a preparation patch for usage of new pci instructions. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: add parameter to force floating irqsSebastian Ott
Provide a kernel parameter to force the usage of floating interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: gather statistics for floating vs directed irqsSebastian Ott
Gather statistics to distinguish floating and directed interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390: show statistics for MSI IRQsSebastian Ott
Improve /proc/interrupts on s390 to show statistics for individual MSI interrupts. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: provide support for CPU directed interruptsSebastian Ott
Up until now all interrupts on s390 have been floating. For MSI interrupts we've used a global summary bit vector (with a bit for each function) and a per-function interrupt bit vector (with a bit per MSI). This patch introduces a new IRQ delivery mode: CPU directed interrupts. In this new mode a per-CPU interrupt bit vector is used (with a bit per MSI per function). Further it is now possible to direct an IRQ to a specific CPU so we can finally support IRQ affinity. If an interrupt can't be delivered because the appointed CPU is occupied by a hypervisor the interrupt is delivered floating. For this a global summary bit vector is used (with a bit per CPU). Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: clarify interrupt vector usageSebastian Ott
Rename and clarify the usage of the interrupt bit vectors. Also change the array of the per-function bit vectors to be dynamically allocated. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/airq: recognize directed interruptsSebastian Ott
Add an extra parameter for airq handlers to recognize floating vs. directed interrupts. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: move everything irq related to pci_irq.cSebastian Ott
Move everything interrupt related from pci.c to pci_irq.c. No functional change. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: remove unused defineSebastian Ott
No users of pr_debug in that file. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-04-29s390/pci: mark command line parser data __initdataSebastian Ott
No point to keep that around. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-03-05Merge tag 's390-5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A copy of Arnds compat wrapper generation series - Pass information about the KVM guest to the host in form the control program code and the control program version code - Map IOV resources to support PCI physical functions on s390 - Add vector load and store alignment hints to improve performance - Use the "jdd" constraint with gcc 9 to make jump labels working again - Remove amode workaround for old z/VM releases from the DCSS code - Add support for in-kernel performance measurements using the CPU measurement counter facility - Introduce a new PMU device cpum_cf_diag to capture counters and store thenn as event raw data. - Bug fixes and cleanups * tag 's390-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits) Revert "s390/cpum_cf: Add kernel message exaplanations" s390/dasd: fix read device characteristic with CONFIG_VMAP_STACK=y s390/suspend: fix prefix register reset in swsusp_arch_resume s390: warn about clearing als implied facilities s390: allow overriding facilities via command line s390: clean up redundant facilities list setup s390/als: remove duplicated in-place implementation of stfle s390/cio: Use cpa range elsewhere within vfio-ccw s390/cio: Fix vfio-ccw handling of recursive TICs s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem s390/cpum_cf: Handle EBUSY return code from CPU counter facility reservation s390/cpum_cf: Add kernel message exaplanations s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace s390/cpum_cf: add ctr_stcctm() function s390/cpum_cf: move common functions into a separate file s390/cpum_cf: introduce kernel_cpumcf_avail() function s390/cpu_mf: replace stcctm5() with the stcctm() function s390/cpu_mf: add store cpu counter multiple instruction support s390/cpum_cf: Add minimal in-kernel interface for counter measurements s390/cpum_cf: introduce kernel_cpumcf_alert() to obtain measurement alerts ...
2019-02-07s390/pci: map IOV resourcesSebastian Ott
Map IOV resources such that pci common code recognizes the IOV capability of PFs. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-07s390/pci: improve bar checkSebastian Ott
Improve the bar check in pci_iomap_range to cover functions for which we recognize more bars than what we can access due to AR restrictions. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-02-07Revert "s390/pci: remove bit_lock usage in interrupt handler"Sebastian Ott
This reverts commit 9594ca6b87d9f11e9f14ac31581e0e5d79a8e839. With the handle_simple_irq irq_flow_handler it must be ensured to not call generic_handle_irq with the same IRQ number on 2 CPUs at the same time (interrupts are floating on s390). Contrary to my initial investigation the irq_desc's lock usage in handle_simple_irq does not ensure this. Thus re-introduce the bit- lock usage in s390's pci handler. Reported-by: Ursula Braun <ubraun@linux.ibm.com> Reported-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-28s390: pci: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-02Merge tag 's390-4.21-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - A larger update for the zcrypt / AP bus code: + Update two inline assemblies in the zcrypt driver to make gcc happy + Add a missing reply code for invalid special commands for zcrypt + Allow AP device reset to be triggered from user space + Split the AP scan function into smaller, more readable functions - Updates for vfio-ccw and vfio-ap + Add maintainers and reviewer for vfio-ccw + Include facility.h in vfio_ap_drv.c to avoid fragile include chain + Simplicy vfio-ccw state machine - Use the common code version of bust_spinlocks - Make use of the DEFINE_SHOW_ATTRIBUTE - Fix three incorrect file permissions in the DASD driver - Remove bit spin-lock from the PCI interrupt handler - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code * tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: rework ap scan bus code s390/zcrypt: make sysfs reset attribute trigger queue reset s390/pci: fix sleeping in atomic during hotplug s390/pci: remove bit_lock usage in interrupt handler s390/drivers: fix proc/debugfs file permissions s390: convert to DEFINE_SHOW_ATTRIBUTE MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer vfio: ccw: Merge BUSY and BOXED states s390: use common bust_spinlocks() s390/zcrypt: improve special ap message cmd handling s390/ap: rework assembler functions to use unions for in/out register variables s390: vfio-ap: include <asm/facility> for test_facility()
2019-01-01s390/pci: skip VF scanningSebastian Ott
Set the flag to skip scanning for VFs after SR-IOV enablement. VF creation will be triggered by the hotplug code. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-12-20dma-mapping: zero memory returned from dma_alloc_*Christoph Hellwig
If we want to map memory from the DMA allocator to userspace it must be zeroed at allocation time to prevent stale data leaks. We already do this on most common architectures, but some architectures don't do this yet, fix them up, either by passing GFP_ZERO when we use the normal page allocator or doing a manual memset otherwise. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Sam Ravnborg <sam@ravnborg.org> [sparc]
2018-12-13s390/pci: fix sleeping in atomic during hotplugSebastian Ott
When triggered by pci hotplug (PEC 0x306) clp_get_state is called with spinlocks held resulting in the following warning: zpci: n/a: Event 0x306 reconfigured PCI function 0x0 BUG: sleeping function called from invalid context at mm/page_alloc.c:4324 in_atomic(): 1, irqs_disabled(): 0, pid: 98, name: kmcheck 2 locks held by kmcheck/98: Change the allocation to use GFP_ATOMIC. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 21:21:49 +0000