summaryrefslogtreecommitdiff
path: root/arch/ppc64
AgeCommit message (Collapse)Author
2005-10-20ppc64: Minor compilation fixesPaul Mackerras
This defines CONFIG_PPC_STD_MMU for ppc64, changes an instance of sys32_ to compat_sys_ in the ppc64 syscall table, and removes a reference to a non-existent arch/powerpc/xmon/Makefile. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpcPaul Mackerras
Also corrected my email address in ptrace.c and updated the comments at the top of ptrace32.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19powerpc: Merge machdep.hPaul Mackerras
A few things change for consistency between ppc32 and ppc64: idle functions return void; *_get_boot_time functions return unsigned long (i.e. time_t) rather than filling in a struct rtc_time (since that's useful to the callers and easier for pmac to generate); *_get_rtc_time and *_set_rtc_time functions take a struct rtc_time; irq_canonicalize is gone; nvram_sync returns void. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18Merge rsync://oak/kernels/iseries/work/Paul Mackerras
2005-10-18powerpc: change sys32_ to compat_sys_Stephen Rothwell
This allows us to get rid of one type of entry in systbl.S. In passing we remove the duplicate compat_sys_getdents and compat_sys_utimes for which there are generic versions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpcPaul Mackerras
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc), and consolidates the sys_fadvise64_64 implementations for 32-bit. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18powerpc: merge ppc signal.c and ppc64 signal32.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-17powerpc: Merge syscalls.c and sys_ppc32.c.Paul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-14powerpc: move iSeries/iSeries_pci.h to platforms/iseriesStephen Rothwell
The only real user of this file outside platforms/iseries was drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR() so we move that to abs_addr.h (and lowercase it). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13powerpc: merge ptrace.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13ppc64: use powerpc of_device.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13ppc64: fix arch/ppc64/kernel/MakefileStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13ppc64: merge binfmt_elf32.cStephen Rothwell
and use start_thread for both 32 and 64 bit bineries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13powerpc: consolidate cputable.cStephen Rothwell
Also simplify arch/ppc64/kernel/Makefile Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-12Merge from Linus' treePaul Mackerras
2005-10-11[PATCH] ppc64: Add R_PPC64_TOC16 module relocPeter Bergner
Newer gcc's are generating this relocation, so the module loader needs to handle it. Signed-off-by: Peter Bergner <bergner@vnet.ibm.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11[PATCH] ppc64: Fix PCI hotplugAnton Blanchard
pSeries_irq_bus_setup is marked __devinit but references s7a_workaround which is marked __initdata. Depending on who got the memory for s7a_workaround (and if the value was now positive), it was possible for PCI hotplugged devices to have 3 subtracted from their interrupt number. This would happen randomly and caused me much confusion :) Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11ppc64: compile fix - define execve in misc.SPaul Mackerras
This used to be inline in include/asm-ppc64/unistd.h, but isn't inline in the merged include/asm-powerpc/unistd.h, so we need a definition here. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11ppc64: Use merged versions of init_task.c and process.c.Paul Mackerras
These two files are now built in arch/powerpc/kernel instead of arch/ppc64/kernel. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Get 64-bit configs to compile with ARCH=powerpcPaul Mackerras
This is a bunch of mostly small fixes that are needed to get ARCH=powerpc to compile for 64-bit. This adds setup_64.c from arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move lparmap.c to arch/powerpc/kernelPaul Mackerras
Since lparmap.s gets included in arch/powerpc/kernel/head_64.S, this avoids depending on a file in another directory. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Reduce the 32/64-bit diffs in vmlinux.lds.SPaul Mackerras
Also adds the definition of the _sdata symbol to the ppc64 vmlinux.lds.S. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10ppc64: Use SPRN_ prefix for special purpose register namesPaul Mackerras
Now that we are using the merged reg.h we have to use the SPRN_xxx names rather than the xxx names. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: move pSeries files to arch/powerpc/platforms/pseriesPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Merge arch/ppc64/mm to arch/powerpc/mmPaul Mackerras
This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm, and arranges that we use them when compiling with ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10ppc64: Use the merged lmb routinesPaul Mackerras
The only real change here is that lmb_enforce_memory_limit now takes the memory_limit as a parameter instead of as a global variable. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Make some #includes explicit.Paul Mackerras
In preparation for merging processor.h, this adds some explicit but won't be after the merge. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10powerpc: Use SPRN_xxx rather than xxx for SPR numbersPaul Mackerras
This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to special purpose registers to SPRN_HID0, SPRN_SPRG3, etc. Using the SPRN_ symbols clutters the namespace less, and the forthcoming merge of asm/processor.h and asm/reg.h is going to remove the non-SPRN_ versions. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01[PATCH] ppc64: fix up()/down() usage for kprobe_mutexAnanth N Mavinakayanahalli
The incorrect kprobe_mutex usage on x86_64 had percolated to ppc64 too. First noticed by Yanmin Zhang. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01powerpc: make iSeries buildStephen Rothwell
Merge vmlinux.lds.S. Also remove arch/powerpc/kernel/vmlinux.lds which is a generated file. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01ppc64: simplify the build a littleStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01powerpc: merge idle_power4.S and trapc.sStephen Rothwell
Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30[PATCH] bogus BUILD_BUG_ON() in bpa_iommuAl Viro
BUILD_BUG_ON(1) is asking for trouble (and getting it) when used in that manner - dead code elimination happens after we parse it and invalid type is invalid type, dead code or not. It might be version-dependent, but at least 4.0.1 refuses to accept that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30powerpc: Move lparmap.c to powerpc/platformsStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30powerpc: remove old vector.S filesStephen Rothwell
Update old kernel/Makefiles to cope Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-29Merge by hand from Linus' tree.Paul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28[PATCH] ppc64: More hugepage fixesBenjamin Herrenschmidt
My previous patch fixing invalidation of huge PTEs wasn't good enough, we still had an issue if a PTE invalidation batch contained both small and large pages. This patch fixes this by making sure the batch is flushed if the page size fed to it changes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28[PATCH] ppc64: Add missing barrier() in kexec codeAnton Blanchard
Mikey and I were testing kexec and hit a lockup. It turns out gcc 4.0 optimises the kexec_prepare_cpus loop so we avoid reloading paca.hw_cpu_id. A gcc barrier() fixes the problem. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28Merge Stephen Rothwell's patchesPaul Mackerras
2005-09-28[PATCH] powerpc: merged asm/cputable.hKumar Gala
Merged cputable.h between ppc32 and ppc64. In doing this removed support for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they dont compile correctly. C code should use cpu_has_feature(). This is based on Arnd Bergmann's initial patch. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28ppc64 iSeries: use device_node instead of iSeries_Device_nodeStephen Rothwell
There needs to be more cleanup after this. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: move more iSeries codeStephen Rothwell
Move the iSeries specific parts of misc.S and ppc_ksyms.c into powerpc/platforms/iseries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move viopath.c to powerpc/platforms/iseriesStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_smp.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to smp.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_vio.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to vio.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_VpdInfo.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to vpdinfo.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_irq.c to powerpc/platorms/iseriesStephen Rothwell
And rename it to irq.c. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_pci.c to powerpc/platform/iseriesStephen Rothwell
and rename it to pci.c. This also required moving arch/ppc64/kernel/pci.h into include/asm-powerpc (called ppc-pci.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28powerpc: Move iSeries_iommu.c to powerpc/platforms/iseriesStephen Rothwell
And rename it to iommu.c Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 18:29:14 +0000