summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2011-09-20powerpc/powernv: Get kernel command line accross OPAL takeoverBenjamin Herrenschmidt
We stash it in boot_command_line which isn't in BSS and so won't be overwritten. We then use that as a default cmd_line before we walk the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/powernv: Add OPAL takeover from PowerVMBenjamin Herrenschmidt
On machines supporting the OPAL firmware version 1, the system is initially booted under pHyp. We then use a special hypercall to verify if OPAL is available and if it is, we then trigger a "takeover" which disables pHyp and loads the OPAL runtime firmware, giving control to the kernel in hypervisor mode. This patch add the necessary code to detect that the OPAL takeover capability is present when running under PowerVM (aka pHyp) and perform said takeover to get hypervisor control of the processor. To perform the takeover, we must first use RTAS (within Open Firmware runtime environment) to start all processors & threads, in order to give control to OPAL on all of them. We then call the takeover hypercall on everybody, OPAL will re-enter the kernel main entry point passing it a flat device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/powernv: Add CPU hotplug supportBenjamin Herrenschmidt
Unplugged CPU go into NAP mode in a loop until woken up Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Add skeleton PowerNV platformBenjamin Herrenschmidt
This adds a skeletton for the new Power "Non Virtualized" platform which will be used by machines supporting running without an hypervisor, for example in order to run KVM. These machines will be using a new firmware called OPAL for which the support will be provided by later patches. The PowerNV platform is intended to be also usable under the BML environment used internally for early CPU bringup which is why the code also supports using RTAS instead of OPAL in various places. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/powernv: Don't clobber r9 in relative_toc()Benjamin Herrenschmidt
With OPAL, r8 and r9 will be used to pass the OPAL base and entry for debugging purposes (those informations are also in the device-tree). We don't want to clobber those registers that early. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/pci: Call pcie_bus_configure_settings()Benjamin Herrenschmidt
This new function is used to properly setup the PCI Express Max Payload Size (and in some circumstances Max Read Request Size). Some systems will not operate properly if these aren't set correctly and the firmware doesn't always do it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/smp: More generic support for "soft hotplug"Benjamin Herrenschmidt
This adds more generic support for doing CPU hotplug with a simple idle loop and no actual reset of the processors. The generic smp_generic_kick_cpu() does the hotplug bringup trick if the PACA shows that the CPU has already been started at boot and we provide an accessor for the CPU state. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/udbg: Fix Kconfig entry for avoiding 44x early debug with KVMBenjamin Herrenschmidt
It was preventing the global early debug selection whenever KVM was enabled instead of only preventing the 440 specific one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Fix deadlock in icswx codeAnton Blanchard
The icswx code introduced an A-B B-A deadlock: CPU0 CPU1 ---- ---- lock(&anon_vma->mutex); lock(&mm->mmap_sem); lock(&anon_vma->mutex); lock(&mm->mmap_sem); Instead of using the mmap_sem to keep mm_users constant, take the page table spinlock. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Fix oops when echoing bad values to /sys/devices/system/memory/probeAnton Blanchard
If we echo an address the hypervisor doesn't like to /sys/devices/system/memory/probe we oops the box: # echo 0x10000000000 > /sys/devices/system/memory/probe kernel BUG at arch/powerpc/mm/hash_utils_64.c:541! The backtrace is: create_section_mapping arch_add_memory add_memory memory_probe_store sysdev_class_store sysfs_write_file vfs_write SyS_write In create_section_mapping we BUG if htab_bolt_mapping returned an error. A better approach is to return an error which will propagate back to userspace. Rerunning the test with this patch applied: # echo 0x10000000000 > /sys/devices/system/memory/probe -bash: echo: write error: Invalid argument Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Coding style cleanupsAnton Blanchard
While converting code to use for_each_node_by_type I noticed a number of coding style issues. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Use for_each_node_by_type instead of open coding itAnton Blanchard
Use for_each_node_by_type instead of open coding it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Remove double of_node_put in hot_add_node_scn_to_nidAnton Blanchard
During memory hotplug testing, I got the following warning: ERROR: Bad of_node_put() on /memory@0 of_node_release kref_put of_node_put of_find_node_by_type hot_add_node_scn_to_nid hot_add_scn_to_nid memory_add_physaddr_to_nid ... of_find_node_by_type() loop does the of_node_put for us so we only need the handle the case where we terminate the loop early. As suggested by Stephen Rothwell we can do the of_node_put unconditionally outside of the loop since of_node_put handles a NULL argument fine. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: stable@kernel.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Remove duplicate RECLAIM_DISTANCE definitionAnton Blanchard
We have two identical definitions of RECLAIM_DISTANCE, looks like the patch got applied twice. Remove one. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Disable NEWIDLE balancing at node levelAnton Blanchard
On big POWER7 boxes we see large amounts of CPU time in system processes like workqueue and watchdog kernel threads. We currently rebalance the entire machine each time a task goes idle and this is very expensive on large machines. Disable newidle balancing at the node level and rely on the scheduler tick to rebalance across nodes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Increase SD_NODES_PER_DOMAIN to 32.Anton Blanchard
The largest POWER7 boxes have 32 nodes. SD_NODES_PER_DOMAIN groups nodes into chunks of 16 and adds a global balancing domain (SD_ALLNODES) above it. If we bump SD_NODES_PER_DOMAIN to 32, then we avoid this extra level of balancing on our largest boxes. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/numa: Enable SD_WAKE_AFFINE in node definitionAnton Blanchard
When chasing a performance issue on ppc64, I noticed tasks communicating via a pipe would often end up on different nodes. It turns out SD_WAKE_AFFINE is not set in our node defition. Commit 9fcd18c9e63e (sched: re-tune balancing) enabled SD_WAKE_AFFINE in the node definition for x86 and we need a similar change for ppc64. I used lmbench lat_ctx and perf bench pipe to verify this fix. Each benchmark was run 10 times and the average taken. lmbench lat_ctx: before: 66565 ops/sec after: 204700 ops/sec 3.1x faster perf bench pipe: before: 5.6570 usecs after: 1.3470 usecs 4.2x faster Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20Merge remote-tracking branch 'origin/master' into nextBenjamin Herrenschmidt
(Merge in order to get the PCIe mps/mrss code fixes)
2011-09-20powerpc/ps3: Add gelic udbg driverHector Martin
Add a new udbg driver for the PS3 gelic Ehthernet device. This driver shares only a few stucture and constant definitions with the gelic Ethernet device driver, so is implemented as a stand-alone driver with no dependencies on the gelic Ethernet device driver. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/eeh: Fix /proc/ppc64/eeh creationThadeu Lima de Souza Cascardo
Since commit 188917e183cf9ad0374b571006d0fc6d48a7f447, /proc/ppc64 is a symlink to /proc/powerpc/. That means that creating /proc/ppc64/eeh will end up with a unaccessible file, that is not listed under /proc/powerpc/ and, then, not listed under /proc/ppc64/. Creating /proc/powerpc/eeh fixes that problem and maintain the compatibility intended with the ppc64 symlink. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org> [3.x]
2011-09-20powerpc/xics: Add __init to marker icp_native_init()Arnaud Lacombe
This should fix the following warning: LD arch/powerpc/sysdev/xics/built-in.o WARNING: arch/powerpc/sysdev/xics/built-in.o(.text+0x1310): Section mismatch in reference from the function .icp_native_init() to the function .init.text:.icp_native_init_one_node() The function .icp_native_init() references the function __init .icp_native_init_one_node(). This is often because .icp_native_init lacks a __init annotation or the annotation of .icp_native_init_one_node is wrong. icp_native_init() is only referenced in `arch/powerpc/sysdev/xics/xics-common.c' by xics_init() which is itself marked with __init. = not built-tested = Reported-by: Timur Tabi <timur@freescale.com> Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/pseries: Avoid spurious error during hotplug CPU addAnton Blanchard
During hotplug CPU add we get the following error: Unexpected Error (0) returned from configure-connector ibm,configure-connector returns 0 for configuration complete, so catch this and avoid the error. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: <stable@kernel.org>
2011-09-20powerpc/mm: Fix the call trace when resumed from hibernationTang Yuantian
In SMP mode, the kernel would produce call trace when resumed from hibernation. The reason is when the function destroy_context is called to drop the resuming mm context, the mm->context.active is 1 which is wrong and should be zero. We pass the current->active_mm as previous mm context to function switch_mmu_context to decrease the context.active by 1. In UP mode, there is no effect. Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/4xx/pci: Add __init annotations for *init_port_hw() functions.Tony Breeds
The various port_init_hw methods of ppc4xx_pciex_hwops should have been marked __init and when I added ppc4xx_pciex_port_reset_sdr(), which is __init. This added many section mismatch warnings like: WARNING: arch/powerpc/sysdev/built-in.o(.text+0x5c68): Section mismatch in reference from the function ppc440spe_pciex_init_port_hw() to the function .init.text:ppc4xx_pciex_port_reset_sdr() The function ppc440spe_pciex_init_port_hw() references the function __init ppc4xx_pciex_port_reset_sdr(). This is often because ppc440spe_pciex_init_port_hw lacks a __init annotation or the annotation of ppc4xx_pciex_port_reset_sdr is wrong. Trivial patch to silence those warnings. Reported-By: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Yours Tony Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/wsp: Add MSI support for PCI on PowerENMichael Ellerman
Based on a patch by Michael Ellerman <michael@ellerman.id.au> Patch was simply forward ported upstream. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/wsp: Add PCIe Root support to PowerEN/WSPBenjamin Herrenschmidt
Based on a patch by Benjamin Herrenschmidt <benh@kernel.crashing.org> Modernized and slightly modified to not record erros into the nvram log since we do not have that device driver just yet. Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/wsp: Fix Wire Speed Processor platform configsJimi Xenidis
Some config selections were applied to the platform (reference board) when they actuall apply to the chip. Signed-off-by: Jimi Xenidis <jimix@pobox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20pseries/iommu: Add missing kfreeJulia Lawall
At this point, window has not been stored anywhere, so it has to be freed before leaving the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/32: Pass device tree address as u64 to machine_initScott Wood
u64 is used rather than phys_addr_t to keep things simple, as this is called from assembly code. Update callers to pass a 64-bit address in r3/r4. Other unused register assignments that were once parameters to machine_init are dropped. For FSL BookE, look up the physical address of the device tree from the effective address passed in r3 by the loader. This is required for situations where memory does not start at zero (due to AMP or IOMMU-less virtualization), and thus the IMA doesn't start at zero, and thus the device tree effective address does not equal the physical address. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/nvram: Add compression to fit more oops output into NVRAMJim Keniston
Capture more than twice as much text from the printk buffer, and compress it to fit it in the lnx,oops-log NVRAM partition. You can view the compressed text using the new (as of July 20) --unzip option of the nvram command in the powerpc-utils package. [BenH: Added select of ZLIB_DEFLATE] Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Fix build dependencies for epapr.c which needs libfdt.hMatthew McClintock
Currently, the build can (very rarely) fail to build because libfdt.h has not been created or is in the process of being copied. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/mpic: Add support for discontiguous coresTimur Tabi
There is one place in the MPIC driver that assumes that the cores are numbered from 0 to n-1. However, this is not true if the CPUs are not numbered sequentially. This can happen on a eight-core SOC where cores two and three are removed in the device tree. So instead of blindly looping, we iterate over the discovered CPUs and use the SMP ID as the index. This means that we no longer ask the MPIC how many CPUs there are, so we also delete mpic->num_cpus. We also catch if the number of CPUs in the SOC exceeds the number that the MPIC supports. This should never happen, of course, but it's good to be sure. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Hugetlb for BookEBecky Bruce
Enable hugepages on Freescale BookE processors. This allows the kernel to use huge TLB entries to map pages, which can greatly reduce the number of TLB misses and the amount of TLB thrashing experienced by applications with large memory footprints. Care should be taken when using this on FSL processors, as the number of large TLB entries supported by the core is low (16-64) on current processors. The supported set of hugepage sizes include 4m, 16m, 64m, 256m, and 1g. Page sizes larger than the max zone size are called "gigantic" pages and must be allocated on the command line (and cannot be deallocated). This is currently only fully implemented for Freescale 32-bit BookE processors, but there is some infrastructure in the code for 64-bit BooKE. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20serial/8250: Move UPIO_TSI to powerpcArnd Bergmann
This iotype is only used by the legacy_serial code in powerpc, so the code should live there, rather than be compiled in for every 8250 driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: linux-serial@vger.kernel.org Acked-by: David Daney <david.daney@cavium.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Tidy up dma_map_ops after adding new hookMilton Miller
The new get_required_mask hook name is longer than many of but not all of the prior ops. Tidy the struct initializers to align the equal signs using the local whitespace. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc: Use the newly added get_required_mask dma_map_ops hookMilton Miller
Now that the generic code has dma_map_ops set, instead of having a messy ifdef & if block in the base dma_get_required_mask hook push the computation into the dma ops. If the ops fails to set the get_required_mask hook default to the width of dma_addr_t. This also corrects ibmbus ibmebus_dma_supported to require a 64 bit mask. I doubt anything is checking or setting the dma mask on that bus. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-01powerpc: Override dma_get_required_mask by platform hook and opsMilton Miller
The hook dma_get_required_mask is supposed to return the mask required by the platform to operate efficently. The generic version of dma_get_required_mask in driver/base/platform.c returns a mask based only on max_pfn. However, this is likely too big for iommu systems and could be too small for platforms that require a dma offset or have a secondary window at a high offset. Override the default, provide a hook in ppc_md used by pseries lpar and cell, and provide the default answer based on memblock_end_of_DRAM(), with hooks for get_dma_offset, and provide an implementation for iommu that looks at the defined table size. Coverting from the end address to the required bit mask is based on the generic implementation. The need for this was discovered when the qla2xxx driver switched to 64 bit dma then reverted to 32 bit when dma_get_required_mask said 32 bits was sufficient. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: benh@kernel.crashing.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-01Merge remote-tracking branch 'origin/master' into nextBenjamin Herrenschmidt
(Pickup Stephen's fix d4d7b2a11c423a8d4088bb0090e4c8d626d043bc)
2011-08-31Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/p1023rds: Fix the error of bank-width of nor flash powerpc/85xx: enable caam crypto driver by default powerpc/85xx: enable the audio drivers in the defconfigs
2011-08-30powerpc/p1023rds: Fix the error of bank-width of nor flashChunhe Lan
In the p1023rds, a physical bus of nor flash is 16 bits width. The bank-width is width (in bytes) of the bus width. So, the value of bank-width of nor flash is not one, and it should be two. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30powerpc/85xx: enable caam crypto driver by defaultKim Phillips
corenet based SoCs have SEC4 h/w, so enable the SEC4 driver, caam, and the algorithms it supports, and disable the SEC2/3 driver, talitos. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30powerpc/85xx: enable the audio drivers in the defconfigsTimur Tabi
Enable the audio drivers in the non-corenet 85xx defconfigs so that audio is enabled on the Freescale P1022DS reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-08-30Merge remote-tracking branch 'jwb/next' into nextBenjamin Herrenschmidt
2011-08-29remove remaining references to nfsservctlStephen Rothwell
These were missed in commit f5b940997397 "All Arch: remove linkage for sys_nfsservctl system call" due to them having no sys_ prefix (presumably). Cc: NeilBrown <neilb@suse.de> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25arch/powerpc/sysdev/fsl_rio.c: correct IECSR register clear valueLiu Gang-B34182
This bug causes the IECSR register clear failure. In this case, the RETE (retry error threshold exceeded) interrupt will be generated and cannot be cleared. So the related ISR may be called persistently. The RETE bit in IECSR is cleared by writing a 1 to it. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-11powerpc/40x: Remove obsolete HCU4 boardJosh Boyer
The HCU4 board is unmaintained. Remove it. Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11powerpc/4xx: enable and fix pcie gen1/gen2 on the 460sxAyman El-Khashab
Adds a register to the config space for the 460sx. Changes the vc0 detect to a pll detect. maps configuration space to test the link status. changes the setup to enable gen2 devices to operate at gen2 speeds. fixes mapping that was not correct for the 460sx. added bit definitions for the OMRxMSKL registers. Removed reserved bit that was set incorrectly in the OMR2MSKL register. tested on the 460sx eiger and custom board Signed-off-by: Ayman El-Khashab <ayman@elkhashab.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11powerpc/44x: Add NOR flash device to Yosemite dtsStefan Roese
Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11powerpc/44x: Kexec support for PPC440X chipsetsSuzuki Poulose
This patch adds kexec support for PPC440 based chipsets. This work is based on the KEXEC patches for FSL BookE. The FSL BookE patch and the code flow could be found at the link below: http://patchwork.ozlabs.org/patch/49359/ Steps: 1) Invalidate all the TLB entries except the one this code is run from 2) Create a tmp mapping for our code in the other address space and jump to it 3) Invalidate the entry we used 4) Create a 1:1 mapping for 0-2GiB in blocks of 256M 5) Jump to the new 1:1 mapping and invalidate the tmp mapping I have tested this patches on Ebony, Sequoia boards and Virtex on QEMU. You need kexec-tools commit e8b7939b1e or newer for ppc440x support, available at: git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git Signed-off-by: Suzuki Poulose <suzuki@in.ibm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
2011-08-11powerpc: Really fix build without CONFIG_PCIBenjamin Herrenschmidt
Brown paper bag day, previous commit wouldn't work very well with modules enabled. Move the exports into the ifdef. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 13:39:55 +0000