summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2006-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
Fix up delete/modify conflict of arch/ppc/kernel/process.c by hand (it's gone, gone, gone). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] powerpc: task_stack_page()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12[PATCH] powerpc: task_thread_info()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-12powerpc: make ARCH=ppc use arch/powerpc/kernel/process.cPaul Mackerras
Commit 5388fb1025443ec223ba556b10efc4c5f83f8682 made signal_32.c use discard_lazy_cpu_state, which broke ARCH=ppc because that uses the common signal_32.c but has its own process.c. Make ARCH=ppc use the common process.c to fix this and to reduce the amount of duplicated code. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: cell namespace cleanupArnd Bergmann
These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: xmon namespace cleanupsArnd Bergmann
These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: pmac namespace cleanupArnd Bergmann
pmac_setup_arch is only used in the file that it is defined in, so it should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: pseries namespace cleanupArnd Bergmann
These symbols are only used in the file that they are defined in, so they should not be in the global namespace. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: minor dart driver cleanupOlof Johansson
Rpn is assigned every time in the loop, no need to increase it too. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: small pci cleanupsStephen Rothwell
pcibios_claim_one_bus is not needed on iSeries and phbs_remap_io can be mode static. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: clean up iommu.h a bitStephen Rothwell
There was a function declared for CONFIG_PSERIES which no longer exists and the two function declarations for CONFIG_ISERIES have been moved into an include file in platforms/iseries since they are defined and used only there. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: iSeries fixes for build with no PCIStephen Rothwell
This reverts part of "ppc64 iSeries: allow build with no PCI" (145d01e4287b8cbf50f87c3283e33bf5c84e8468) which affected generic code and applies a fix in the arch specific code. Commit "partly merge iseries do_IRQ" (5fee9b3b39eb55c7e3619a3b36ceeabffeb8f144) introduced iSeries_get_irq which was only available if CONFIG_PCI is set. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: eliminate bitfields from ItLpNacaStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: remove bitfields from HvLpEventStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: Fixed memory reserve map layoutKumar Gala
powerpc: Fixed memory reserve map layout The memory reserve map is suppose to be a pair of 64-bit integers to represent each region. On ppc32 the code was treating the pair as two 32-bit integers. Additional the prom_init code was producing the wrong layout on ppc32. Added a simple check to try to provide backwards compatibility. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: remove warning in EEH codeOlof Johansson
Remove warning in eeh code about mixed variables and code. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12[PATCH] powerpc: Avoid potential FP corruption with preempt and UPPaul Mackerras
Heikki Lindholm pointed out that there was a potential race with the lazy CPU state (FP, VR, EVR) stuff if preempt is enabled. The race is that in the process of restoring FP state on sigreturn, the task gets preempted by a user task that wants to use the FPU. It will take an FP unavailable exception, which will write the current FPU state to the thread_struct, overwriting the values which sigreturn has stored. Note that this can only happen on UP since we don't implement lazy CPU state on SMP. The fix is to flush the lazy CPU state before updating the thread_struct. To do this we re-use the flush_lazy_cpu_state() function from process.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] capable/capability.h (arch/)Randy Dunlap
arch: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] kprobes: fix race in recovery of reentrant probeKeshavamurthy Anil S
There is a window where a probe gets removed right after the probe is hit on some different cpu. In this case probe handlers can't find a matching probe instance related to break address. In this case we need to read the original instruction at break address to see if that is not a break/int3 instruction and recover safely. Previous code had a bug where we were not checking for the above race in case of reentrant probes and the below patch fixes this race. Tested on IA64, Powerpc, x86_64. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11[PATCH] powerpc: Don't build crash.c for PPC32Michael Ellerman
arch/powerpc/kernel/crash.c isn't safe for PPC32 (yet?), so don't build it. Built with CONFIG_KEXEC=y for pmac32_defconfig, pseries_defconfig, and g5_defconfig. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Fix clean_files in arch/powerpc/boot MakefileKumar Gala
clean-files was being set twice rather than being appended to. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Remove redundant setting of htab_addressMichael Ellerman
iSeries doesn't need to set the htab_address explicitly, htab_initialize() will do it for us later. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Add ibm,pft-size to iSeries device treeMichael Ellerman
To make iSeries just a teensy bit less special, create ibm,pft-size properties in the iSeries device tree. We can then rely on htab_dt_scan_pftsize() to set ppc64_pft_size for us. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Add some missing .gitignore'sKumar Gala
ignore generated files under arch/powerpc Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Updated Kconfig and Makefiles for 83xx supportKumar Gala
Updated Kconfig & Makefiles in prep for adding support for the Freescale MPC83xx family of processors to arch/powerpc. Moved around some config options that are more globally applicable to other PowerPC processors. Added a temporary config option (83xx) to match existing arch/ppc support for the MPC83xx line. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] spufs: Suspend/restore MFC DMA operations at SPU context switch.Geoff Levand
The SPE Book IV indicates that MFC DMA operations must be suspended and restored on SPU context switch (in Step 8). This patch adds that operation, which is missing from the current spufs implementation. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: fix for compile problem in kdump code when SMP disabledHaren Myneni
This patch fixes the compilation error (shown below) when CONFIG_SMP=n. arch/powerpc/kernel/crash.c: In function `crash_kexec_prepare_cpus': arch/powerpc/kernel/crash.c:236: error: implicit declaration of function `smp_release_cpus' Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11powerpc: Fix compile error when CONFIG_PROC_VMCORE is not definedPaul Mackerras
We were getting elfcorehdr_addr undefined in this case. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc/64: per cpu data optimisationsAnton Blanchard
The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Make early debugging configurable via KconfigMichael Ellerman
This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: Early debugging support for iSeriesMichael Ellerman
Connect iSeries up to the standard early debugging infrastructure. To actually use this you need to enable the iSeries early debugging in setup_64.c. Then after the messages are logged hit Ctrl-x Ctrl-x on your console to dump the Hypervisor console buffer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] powerpc: remove remaining crash_notes variable from machine_kexec.cOlaf Hering
remove remaining crash_notes definition to fix compile error /dev/shm/linux-2.6/arch/powerpc/kernel/machine_kexec.c:21: error: conflicting types for `crash_notes' /dev/shm/linux-2.6/include/linux/kexec.h:129: error: previous declaration of `crash_notes' Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] PCI Hotplug/powerpc: module build breaklinas
The RPAPHP hoplug driver will not build as a module, because it calls on a pcibios routine which is not exported. This exports the symbol. Problem reported by Olaf Hering <olh@suse.de> Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11[PATCH] enable the RTC driver in ppc64_defconfigOlaf Hering
Enable the RTC driver. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds
2006-01-10Merge ssh://master.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
Fix up some trivial conflicts in {i386|ia64}/Makefile
2006-01-10[PATCH] Serial: disable jsm in ppc64 defconfigPaul Jackson
Changes to the serial driver to remove flip buffers have broken the serial jsm driver. It doesn't even compile anymore. The jsm driver was enabled in only one defconfig - ppc64. In order to keep defconfigs building, disable CONFIG_SERIAL_JSM for the time being. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes: fix build breakageAnanth N Mavinakayanahalli
The following patch (against 2.6.15-rc5-mm3) fixes a kprobes build break due to changes introduced in the kprobe locking in 2.6.15-rc5-mm3. In addition, the patch reverts back the open-coding of kprobe_mutex. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes: arch_remove_kprobeAnil S Keshavamurthy
Currently arch_remove_kprobes() is only implemented/required for x86_64 and powerpc. All other architecture like IA64, i386 and sparc64 implementes a dummy function which is being called from arch independent kprobes.c file. This patch removes the dummy functions and replaces it with #define arch_remove_kprobe(p, s) do { } while(0) Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes-changed-from-using-spinlock-to-mutex fixKeshavamurthy Anil S
Based on some feedback from Oleg Nesterov, I have made few changes to previously posted patch. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] kprobes: changed from using spinlock to mutexAnil S Keshavamurthy
Since Kprobes runtime exception handlers is now lock free as this code path is now using RCU to walk through the list, there is no need for the register/unregister{_kprobe} to use spin_{lock/unlock}_isr{save/restore}. The serialization during registration/unregistration is now possible using just a mutex. In the above process, this patch also fixes a minor memory leak for x86_64 and powerpc. Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] sanitize building of fs/compat_ioctl.cChristoph Hellwig
Now that all these entries in the arch ioctl32.c files are gone [1], we can build fs/compat_ioctl.c as a normal object and kill tons of cruft. We need a special do_ioctl32_pointer handler for s390 so the compat_ptr call is done. This is not needed but harmless on all other architectures. Also remove some superflous includes in fs/compat_ioctl.c Tested on ppc64. [1] parisc still had it's PPP handler left, which is not fully correct for ppp and besides that ppp uses the generic SIOCPRIV ioctl so it'd kick in for all netdevice users. We can introduce a proper handler in one of the next patch series by adding a compat_ioctl method to struct net_device but for now let's just kill it - parisc doesn't compile in mainline anyway and I don't want this to block this patchset. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] common compat_sys_timer_createChristoph Hellwig
The comment in compat.c is wrong, every architecture provides a get_compat_sigevent() for the IPC compat code already. This basically moves the x86_64 version to common code and removes all the others. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] spufs: fix for recent "shrink dentry_struct" patchAndrew Morton
Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10[PATCH] powerpc: Some ppc compile fixes...David Woodhouse
This gets most of the Fedora rawhide RPM building again, as long as I disable CHRP. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10[PATCH] powerpc: Extended PCI config spaceBenjamin Herrenschmidt
This adds back the call to pci_cfg_space_size() when building the PCI tree from OF nodes that was commented out due to the function not being exported by the PCI code. It's now exported, so let's use it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10[PATCH] powerpc: remove compat_sys_pciconfig_*Stephen Rothwell
Matthew Wilcox wondered why we need these functions. We don't. Remove them and just use the "normal" versions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10powerpc: Introduce a new config symbol to control 16550 early debug codePaul Mackerras
The previous change by Kumar Gala in this area led to legacy_serial.c and udbg_16550.c being built as modules when CONFIG_SERIAL_8250=m. Fix this by introducing a new symbol, CONFIG_PPC_UDBG_16550, to control whether these files get built, and arrange for it to be selected for those platforms that need it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10[PATCH] powerpc/pseries: dlpar-add crash on null pointer dereflinas
This fixes a crash on null-pointer deref during dlpar slot addition. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 1c87c0f84943fbbc91826967ff4fea1b059a526f commit)
2006-01-10powerpc: Fix up some compile errors in the PCI error recovery codePaul Mackerras
<asm/systemcfg.h> is gone now, and the PCI error recovery constants in include/linux/pci.h changed their names in the process of getting accepted. Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 5a2516156c591fc3d2059fbd93f97e15eb6010d6 commit)