summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2012-11-15powerpc: Enable relocation on during exceptions at bootIan Munsie
We currently do this synchronously at boot from setup_arch. On a large system this could hypothetically take a little while to complete, so currently we will give up if we are asked to wait for more than a second in total. If we actually start hitting that timeout in practice we can always move this code into a kernel thread to take care of it in the background. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate functionIan Munsie
I am going to use this in the next patch, better to have this code in one place rather than three. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add wrappers to enable/disable relocation on exceptionsIan Munsie
These wrappers hide the parameters that have to be passed to H_SET_MODE to enable/disable relocation on during exceptions. As noted in the comments, since these have partition wide scope, they may take some time to complete and must be periodically retried until H_SUCCESS is returned. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add set_mode hcallIan Munsie
This new hcall in POWER8 is used to set various resource mode registers. eg. it can set address translation mode on interrupt (note: partition wide scope) Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Setup relocation on exceptions for bare metal systemsMichael Neuling
This turns on MMU on execptions via AIL field in the LPCR. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Move initial mfspr LPCR out of __init_LPCRMichael Neuling
We want to change what's initially set in the LPCR, so start by taking the move from LPCR out of the function and into the caller. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add relocation on exception vector handlersMichael Neuling
POWER8/v2.07 allows exceptions to be taken with the MMU still on. A new set of exception vectors is added at 0xc000_0000_0000_4xxx. When the HW takes us here, MSR IR/DR will be set already and we no longer need a costly RFID to turn the MMU back on again. The original 0x0 based exception vectors remain for when the HW can't leave the MMU on. Examples of this are when we can't trust the current MMU mappings, like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU was off already. In these cases the HW will take us to the original 0x0 based exception vectors with the MMU off as before. This uses the new macros added previously too implement these new execption vectors at 0xc000_0000_0000_4xxx. We exit these exception vectors using mflr/blr (rather than mtspr SSR0/RFID), since we don't need the costly MMU switch anymore. This moves the __end_interrupts marker down past these new 0x4000 vectors since they will need to be copied down to 0x0 when the kernel is not at 0x0. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add new macros needed for relocation on exceptionsMichael Neuling
POWER8/v2.07 allows exceptions to be taken with the MMU still on. A new set of exception vectors is added at 0xc000_0000_0000_4xxx. When the HW takes us here, MSR IR/DR will be set already and we no longer need a costly RFID to turn the MMU back on again. The original 0x0 based exception vectors remain for when the HW can't leave the MMU on. Examples of this are when we can't trust the current the MMU mappings, like when we are changing from guest to hypervisor (HV 0 -> 1) or when the MMU was off already. In these cases the HW will take us to the original 0x0 based exception vectors with the MMU off as before. The below macros are copies of the macros used at the 0x0 offset but modified to handle the MMU being on. In these macros we use the link register to jump to the secondary handlers rather than using RFID (RFID was also use to turn on the MMU). Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Turn syscall handler into macrosMichael Neuling
This turns the syscall handler into macros as we are going to want to reuse them again later. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Make load_hander handle upto 64k offsetMichael Neuling
If we change load_hander() to use an ori instead of addi, we can load handlers upto 64k away provided we are still 64k aligned. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Remove unessessary 0x3000 location enforcementMichael Neuling
This removes the large gap between 0x1800 and 0x3000. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Whitespace changes in exception64s.SMichael Neuling
Remove redundancy spaces and make tab usage consistent. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15Merge branch 'dt' into nextBenjamin Herrenschmidt
2012-11-15powerpc: Fix CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n buildAnton Blanchard
If we build a kernel with CONFIG_RELOCATABLE=y CONFIG_CRASH_DUMP=n, the kernel fails when we run at a non zero offset. It turns out we were incorrectly wrapping some of the relocatable kernel code with CONFIG_CRASH_DUMP. Signed-off-by: Anton Blanchard <anton@samba.org> Cc: <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add POWER8 architected mode to cputableMichael Neuling
A PVR of 0x0F000004 means we are arch v2.07 complicate ie, POWER8. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8Michael Neuling
Update ibm,architecture.vec for POWER8 and allows us to support more than one parition per core. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Change free_bootmem() to kfree()JoonSoo Kim
commit ea96025a('Don't use alloc_bootmem() in init_IRQ() path') changed alloc_bootmem() to kzalloc(), but missed to change free_bootmem() to kfree(). So correct it. Signed-off-by: Joonsoo Kim <js1304@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/ptrace: Enable hardware breakpoint upon re-registeringAravinda Prasad
On powerpc, ptrace will disable hardware breakpoint request once the breakpoint is hit. It is the responsibility of the caller to set it again. However, when the caller sets the hardware breakpoint again using ptrace(PTRACE_SET_DEBUGREG, child_pid, 0, addr), the hardware breakpoint is not enabled. While gdb's approach is to unregister and re-register the hardware breakpoint every time the breakpoint is hit - which is working fine, this could affect other programs trying to re-register hardware breakpoint without unregistering. This patch enables hardware breakpoint if the caller is re-registering. Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Use asm-generic/bitops/le.hAkinobu Mita
The only difference between powerpc and asm-generic le-bitops is test_bit_le(). Usually all bitops require a long aligned bitmap. But powerpc test_bit_le() can take an unaligned address. There is no special callsite of test_bit_le() that needs unaligned access in powerpc as far as I can see. So convert to use asm-generic/bitops/le.h for powerpc. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Remove BITOP_MASK and BITOP_WORD from asm/bitops.hAkinobu Mita
Replace BITOP_MASK and BITOP_WORD with BIT_MASK and BIT_WORD defined in linux/bitops.h and remove BITOP_* which are not used anymore. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/iommu: Use bitmap libraryAkinobu Mita
- Caluculate the bitmap size with BITS_TO_LONGS() - Use bitmap_empty() to verify that all bits are cleared This also includes a printk to pr_warn() conversion. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Fix typos in Freescale copyright claimsYang Li
There are many cases that Semiconductor is misspelled. The patch fix these typos. Signed-off-by: Li Yang <leoli@freescale.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Remove stale function prototypes from setup.hAnton Blanchard
I noticed a couple of function prototypes for functions that no longer exist. Remove them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Move most of setup.h out of uapiAnton Blanchard
Most of setup.h should not be exported to userspace, so move it back. All we are left with is the asm-generic include to pick up the COMMAND_LINE_SIZE define. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Fix denorm symbol nameMichael Neuling
Fix global symbol name to match actual denorm_exception_hv label. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: POWER8 cputable entryMichael Neuling
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add POWER8 setup codeMichael Neuling
Just a copy of POWER7 for now. Will update with new code later. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: make POWER7 setup code name genericMichael Neuling
We are going to reuse this in POWER8 so make the name generic. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/perf: Add missing L2 constraint handling in Power7 PMUMichael Ellerman
If we have two cache events that require different settings of the L2SEL bits in MMCR1 then we can not schedule those events simultaneously. Add logic to the constraint handling to express that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/powermac/cpufreq_32: Set non-infinite transition time for 7447A driverAndreas Schwab
The transition time for the 7447A is around 8ms which makes it possible to use the ondemand governor. This has been tested on the iBook G4 (PowerBook6,7). Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/ptrace: Remove unused addr parameter in ppc_del_hwdebug()Michael Neuling
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/ptrace: Fix spelling mistakeMichael Neuling
s/intruction/instruction/ Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/hw-breakpoint: Use generic hw-breakpoint interfaces for new PPC ↵K.Prasad
ptrace flags PPC_PTRACE_GETHWDBGINFO, PPC_PTRACE_SETHWDEBUG and PPC_PTRACE_DELHWDEBUG are PowerPC specific ptrace flags that use the watchpoint register. While they are targeted primarily towards BookE users, user-space applications such as GDB have started using them for BookS too. This patch enables the use of generic hardware breakpoint interfaces for these new flags. Apart from the usual benefits of using generic hw-breakpoint interfaces, these changes allow debuggers (such as GDB) to use a common set of ptrace flags for their watchpoint needs and allow more precise breakpoint specification (length of the variable can be specified). Mikey added: rebased and added dbginfo.features around #ifdef CONFIG_HAVE_HW_BREAKPOINT Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Remove no longer used ppc_md.idle_loop()Michael Ellerman
The last user of ppc_md.idle_loop() was removed when we dropped the legacy iSeries code, in commit 8ee3e0d. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning !Li Zhong
This patch tries to fix the following BUG report: [ 0.012313] BUG: MAX_STACK_TRACE_ENTRIES too low! [ 0.012318] turning off the locking correctness validator. [ 0.012321] Call Trace: [ 0.012330] [c00000017666f6d0] [c000000000012128] .show_stack+0x78/0x184 (unreliable) [ 0.012339] [c00000017666f780] [c0000000000b6348] .save_trace+0x12c/0x14c [ 0.012345] [c00000017666f800] [c0000000000b7448] .mark_lock+0x2bc/0x710 [ 0.012351] [c00000017666f8b0] [c0000000000bb198] .__lock_acquire+0x748/0xaec [ 0.012357] [c00000017666f9b0] [c0000000000bb684] .lock_acquire+0x148/0x194 [ 0.012365] [c00000017666fa80] [c00000000069371c] .mutex_lock_nested+0x84/0x4ec [ 0.012372] [c00000017666fb90] [c000000000096998] .smpboot_register_percpu_thread+0x3c/0x10c [ 0.012380] [c00000017666fc30] [c0000000009ba910] .spawn_ksoftirqd+0x28/0x48 [ 0.012386] [c00000017666fcb0] [c00000000000a98c] .do_one_initcall+0xd8/0x1d0 [ 0.012392] [c00000017666fd60] [c00000000000b1f8] .kernel_init+0x120/0x398 [ 0.012398] [c00000017666fe30] [c000000000009ad4] .ret_from_kernel_thread+0x5c/0x64 [ 0.012404] [c00000017666fa00] [c00000017666fb20] 0xc00000017666fb20 [ 0.012410] [c00000017666fa80] [c00000000069371c] .mutex_lock_nested+0x84/0x4ec [ 0.012416] [c00000017666fb90] [c000000000096998] .smpboot_register_percpu_thread+0x3c/0x10c [ 0.012422] [c00000017666fc30] [c0000000009ba910] .spawn_ksoftirqd+0x28/0x48 [ 0.012427] [c00000017666fcb0] [c00000000000a98c] .do_one_initcall+0xd8/0x1d0 [ 0.012433] [c00000017666fd60] [c00000000000b1f8] .kernel_init+0x120/0x398 [ 0.012439] [c00000017666fe30] [c000000000009ad4] .ret_from_kernel_thread+0x5c/0x64 ....... The reason is that the back chain of c00000017666fe30 (ret_from_kernel_thread) contains some invalid value, which might form a loop. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/powernv: Fix OPAL debug entryBenjamin Herrenschmidt
OPAL provides the firmware base/entry in registers at boot time for debugging purposes. We had a bug in the code trying to stash these into the appropriate kernel globals (a line of code was probably dropped by accident back when this was merged) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/rtas_flash: Eliminate possible double freeJulia Lawall
The function initialize_flash_pde_data is only called four times. All four calls are in the function rtas_flash_init, and on the failure of any of the calls, remove_flash_pde is called on the third argument of each of the calls. There is thus no need for initialize_flash_pde_data to call remove_flash_pde on the same argument. remove_flash_pde kfrees the data field of its argument, and does not clear that field, so this amounts ot a possible double free. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f,free,a; parameter list[n] ps; type T; expression e; @@ f(ps,T a,...) { ... when any when != a = e if(...) { ... free(a); ... return ...; } ... when any } @@ identifier r.f,r.free; expression x,a; expression list[r.n] xs; @@ * x = f(xs,a,...); if (...) { ... free(a); ... return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/pnv: Avoid bogus outputGavin Shan
There're couples of functions defined to print debugging messages during initializing P7IOC. However, we got bogus output from those functions like pe_info(). The problem here is that the message level (the first parameter to printk()) isn't printable and that caused the bogus output. The patch fixes the issue by merging __pe_printk() to the macro define_pe_printk_level() so that we can pass the message level directly to printk(). Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/sysdev: Use module_platform_driver macroSrinivas Kandagatla
This patch removes some code duplication by using module_platform_driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Fallback to printk() in xmon_printf() if udbg is not setupMichael Ellerman
It is possible to configure a kernel which has xmon enabled, but has no udbg backend to provide IO. This can make xmon rather confusing, as it produces no output, blocks for two seconds, and then returns. As a last resort we can instead try to printk(), which may deadlock or otherwise crash, but tries quite hard not to. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Fiddle xmon_depth_to_print logic in xmon_show_stack()Michael Ellerman
Currently xmon_depth_to_print is static and global, but it's only ever used in xmon_show_stack(). At least with a modern compiler it's inlined, so there's no point in it being static, we could #define it but it's only used in one place. By reworking the logic we can drop count and just decrement the max value as a loop counter. Also switch to a while loop so we actually print no more than 64 frames as you'd expect based on the variable name. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Use STACK_FRAME_OVERHEAD in xmon_show_stack()Michael Ellerman
We use STACK_FRAME_OVERHEAD in the exception vectors to establish the exception frame, so it should be good enough to use here. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Remove unused #definesMichael Ellerman
Neither REGS_PER_LINE or LAST_VOLATILE are used, nor have they ever been as far back as I can see. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Remove renaming #defines of scanhex() and skipbl()Michael Ellerman
We have two #defines that rename scanhex() and skipbl() to xmon_scanhex() and xmon_skipbl() - but no one ever uses those names. So the only effect is to rename the actual symbols in the generated code, and AFACIS there is no reason to do that, so drop them. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Merge start.c into nonstdio.cMichael Ellerman
The routines in start.c are only ever called from nonstdio.c, so if we move them in there they can become static which is nice. I suspect the idea behind the separation was that start.c could be replaced in order to build xmon in userland. If anyone still cares about doing that we could handle that with an ifdef or two. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Make xmon_getchar() staticMichael Ellerman
xmon_getchar() is only called from within nonstdio.c, so make it static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Remove empty xmon_map_scc()Michael Ellerman
This has been empty since 2005, commit 51d3082 "Unify udbg (#2)". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/xmon: Remove unused xmon_expect() & xmon_read_poll()Michael Ellerman
It looks like xmon_expect() was used for doing xmon over a modem (!?), that code was dropped in 2005 in commit 51d3082 "Unify udbg (#2)". Once xmon_expect() is gone xmon_read_poll() is unused, drop it too. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc/udbg: Remove unused udbg_read()Michael Ellerman
The last user of udbg_read() was removed in 2005, in commit fca5dcd "Simplify and clean up the xmon terminal I/O". Given we haven't needed it for 7 years we can probably drop it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc: Add asm/debug.h to get powerpc_debugfs_rootTony Breeds
Since the "Disintegrate asm/system.h for PowerPC" (ae3a197e3d0bfe3f4bf1693723e82dc018c096f3) This has been failing when DEBUG is #defined. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 16:42:46 +0000