summaryrefslogtreecommitdiff
path: root/arch/powerpc
AgeCommit message (Collapse)Author
2020-09-22Merge tag 'kvm-ppc-next-5.10-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM update for 5.10 - Fix for running nested guests with in-kernel IRQ chip - Fix race condition causing occasional host hard lockup - Minor cleanups and bugfixes
2020-09-22KVM: PPC: Book3S: Fix symbol undeclared warningsWang Wensheng
Build the kernel with `C=2`: arch/powerpc/kvm/book3s_hv_nested.c:572:25: warning: symbol 'kvmhv_alloc_nested' was not declared. Should it be static? arch/powerpc/kvm/book3s_64_mmu_radix.c:350:6: warning: symbol 'kvmppc_radix_set_pte_at' was not declared. Should it be static? arch/powerpc/kvm/book3s_hv.c:3568:5: warning: symbol 'kvmhv_p9_guest_entry' was not declared. Should it be static? arch/powerpc/kvm/book3s_hv_rm_xics.c:767:15: warning: symbol 'eoi_rc' was not declared. Should it be static? arch/powerpc/kvm/book3s_64_vio_hv.c:240:13: warning: symbol 'iommu_tce_kill_rm' was not declared. Should it be static? arch/powerpc/kvm/book3s_64_vio.c:492:6: warning: symbol 'kvmppc_tce_iommu_do_map' was not declared. Should it be static? arch/powerpc/kvm/book3s_pr.c:572:6: warning: symbol 'kvmppc_set_pvr_pr' was not declared. Should it be static? Those symbols are used only in the files that define them so make them static to fix the warnings. Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-09-22KVM: PPC: Book3S: Remove redundant initialization of variable retJing Xiangfeng
The variable ret is being initialized with '-ENOMEM' that is meaningless. So remove it. Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-09-22KVM: PPC: Book3S HV: XIVE: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-09-17KVM: PPC: Book3S HV: Set LPCR[HDICE] before writing HDECPaul Mackerras
POWER8 and POWER9 machines have a hardware deviation where generation of a hypervisor decrementer exception is suppressed if the HDICE bit in the LPCR register is 0 at the time when the HDEC register decrements from 0 to -1. When entering a guest, KVM first writes the HDEC register with the time until it wants the CPU to exit the guest, and then writes the LPCR with the guest value, which includes HDICE = 1. If HDEC decrements from 0 to -1 during the interval between those two events, it is possible that we can enter the guest with HDEC already negative but no HDEC exception pending, meaning that no HDEC interrupt will occur while the CPU is in the guest, or at least not until HDEC wraps around. Thus it is possible for the CPU to keep executing in the guest for a long time; up to about 4 seconds on POWER8, or about 4.46 years on POWER9 (except that the host kernel hard lockup detector will fire first). To fix this, we set the LPCR[HDICE] bit before writing HDEC on guest entry. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-09-17KVM: PPC: Book3S HV: Do not allocate HPT for a nested guestFabiano Rosas
The current nested KVM code does not support HPT guests. This is informed/enforced in some ways: - Hosts < P9 will not be able to enable the nested HV feature; - The nested hypervisor MMU capabilities will not contain KVM_CAP_PPC_MMU_HASH_V3; - QEMU reflects the MMU capabilities in the 'ibm,arch-vec-5-platform-support' device-tree property; - The nested guest, at 'prom_parse_mmu_model' ignores the 'disable_radix' kernel command line option if HPT is not supported; - The KVM_PPC_CONFIGURE_V3_MMU ioctl will fail if trying to use HPT. There is, however, still a way to start a HPT guest by using max-compat-cpu=power8 at the QEMU machine options. This leads to the guest being set to use hash after QEMU calls the KVM_PPC_ALLOCATE_HTAB ioctl. With the guest set to hash, the nested hypervisor goes through the entry path that has no knowledge of nesting (kvmppc_run_vcpu) and crashes when it tries to execute an hypervisor-privileged (mtspr HDEC) instruction at __kvmppc_vcore_entry: root@L1:~ $ qemu-system-ppc64 -machine pseries,max-cpu-compat=power8 ... <snip> [ 538.543303] CPU: 83 PID: 25185 Comm: CPU 0/KVM Not tainted 5.9.0-rc4 #1 [ 538.543355] NIP: c00800000753f388 LR: c00800000753f368 CTR: c0000000001e5ec0 [ 538.543417] REGS: c0000013e91e33b0 TRAP: 0700 Not tainted (5.9.0-rc4) [ 538.543470] MSR: 8000000002843033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE> CR: 22422882 XER: 20040000 [ 538.543546] CFAR: c00800000753f4b0 IRQMASK: 3 GPR00: c0080000075397a0 c0000013e91e3640 c00800000755e600 0000000080000000 GPR04: 0000000000000000 c0000013eab19800 c000001394de0000 00000043a054db72 GPR08: 00000000003b1652 0000000000000000 0000000000000000 c0080000075502e0 GPR12: c0000000001e5ec0 c0000007ffa74200 c0000013eab19800 0000000000000008 GPR16: 0000000000000000 c00000139676c6c0 c000000001d23948 c0000013e91e38b8 GPR20: 0000000000000053 0000000000000000 0000000000000001 0000000000000000 GPR24: 0000000000000001 0000000000000001 0000000000000000 0000000000000001 GPR28: 0000000000000001 0000000000000053 c0000013eab19800 0000000000000001 [ 538.544067] NIP [c00800000753f388] __kvmppc_vcore_entry+0x90/0x104 [kvm_hv] [ 538.544121] LR [c00800000753f368] __kvmppc_vcore_entry+0x70/0x104 [kvm_hv] [ 538.544173] Call Trace: [ 538.544196] [c0000013e91e3640] [c0000013e91e3680] 0xc0000013e91e3680 (unreliable) [ 538.544260] [c0000013e91e3820] [c0080000075397a0] kvmppc_run_core+0xbc8/0x19d0 [kvm_hv] [ 538.544325] [c0000013e91e39e0] [c00800000753d99c] kvmppc_vcpu_run_hv+0x404/0xc00 [kvm_hv] [ 538.544394] [c0000013e91e3ad0] [c0080000072da4fc] kvmppc_vcpu_run+0x34/0x48 [kvm] [ 538.544472] [c0000013e91e3af0] [c0080000072d61b8] kvm_arch_vcpu_ioctl_run+0x310/0x420 [kvm] [ 538.544539] [c0000013e91e3b80] [c0080000072c7450] kvm_vcpu_ioctl+0x298/0x778 [kvm] [ 538.544605] [c0000013e91e3ce0] [c0000000004b8c2c] sys_ioctl+0x1dc/0xc90 [ 538.544662] [c0000013e91e3dc0] [c00000000002f9a4] system_call_exception+0xe4/0x1c0 [ 538.544726] [c0000013e91e3e20] [c00000000000d140] system_call_common+0xf0/0x27c [ 538.544787] Instruction dump: [ 538.544821] f86d1098 60000000 60000000 48000099 e8ad0fe8 e8c500a0 e9264140 75290002 [ 538.544886] 7d1602a6 7cec42a6 40820008 7d0807b4 <7d164ba6> 7d083a14 f90d10a0 480104fd [ 538.544953] ---[ end trace 74423e2b948c2e0c ]--- This patch makes the KVM_PPC_ALLOCATE_HTAB ioctl fail when running in the nested hypervisor, causing QEMU to abort. Reported-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-09-17KVM: PPC: Don't return -ENOTSUPP to userspace in ioctlsGreg Kurz
ENOTSUPP is a linux only thingy, the value of which is unknown to userspace, not to be confused with ENOTSUP which linux maps to EOPNOTSUPP, as permitted by POSIX [1]: [EOPNOTSUPP] Operation not supported on socket. The type of socket (address family or protocol) does not support the requested operation. A conforming implementation may assign the same values for [EOPNOTSUPP] and [ENOTSUP]. Return -EOPNOTSUPP instead of -ENOTSUPP for the following ioctls: - KVM_GET_FPU for Book3s and BookE - KVM_SET_FPU for Book3s and BookE - KVM_GET_DIRTY_LOG for BookE This doesn't affect QEMU which doesn't call the KVM_GET_FPU and KVM_SET_FPU ioctls on POWER anyway since they are not supported, and _buggily_ ignores anything but -EPERM for KVM_GET_DIRTY_LOG. [1] https://pubs.opengroup.org/onlinepubs/9699919799/functions/V2_chap02.html Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-09-03KVM: PPC: Book3S HV: XICS: Replace the 'destroy' method by a 'release' methodGreg Kurz
Similarly to what was done with XICS-on-XIVE and XIVE native KVM devices with commit 5422e95103cf ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method"), convert the historical XICS KVM device to implement the 'release' method. This is needed to run nested guests with an in-kernel IRQ chip. A typical POWER9 guest can select XICS or XIVE during boot, which requires to be able to destroy and to re-create the KVM device. Only the historical XICS KVM device is available under pseries at the current time and it still uses the legacy 'destroy' method. Switching to 'release' means that vCPUs might still be running when the device is destroyed. In order to avoid potential use-after-free, the kvmppc_xics structure is allocated on first usage and kept around until the VM exits. The same pointer is used each time a KVM XICS device is being created, but this is okay since we only have one per VM. Clear the ICP of each vCPU with vcpu->mutex held. This ensures that the next time the vCPU resumes execution, it won't be going into the XICS code anymore. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-08-30Merge tag 'locking-urgent-2020-08-30' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "A set of fixes for lockdep, tracing and RCU: - Prevent recursion by using raw_cpu_* operations - Fixup the interrupt state in the cpu idle code to be consistent - Push rcu_idle_enter/exit() invocations deeper into the idle path so that the lock operations are inside the RCU watching sections - Move trace_cpu_idle() into generic code so it's called before RCU goes idle. - Handle raw_local_irq* vs. local_irq* operations correctly - Move the tracepoints out from under the lockdep recursion handling which turned out to be fragile and inconsistent" * tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep,trace: Expose tracepoints lockdep: Only trace IRQ edges mips: Implement arch_irqs_disabled() arm64: Implement arch_irqs_disabled() nds32: Implement arch_irqs_disabled() locking/lockdep: Cleanup x86/entry: Remove unused THUNKs cpuidle: Move trace_cpu_idle() into generic code cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic sched,idle,rcu: Push rcu_idle deeper into the idle path cpuidle: Fixup IRQ state lockdep: Use raw_cpu_*() for per-cpu variables
2020-08-30Merge tag 'powerpc-5.9-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Revert our removal of PROT_SAO, at least one user expressed an interest in using it on Power9. Instead don't allow it to be used in guests unless enabled explicitly at compile time. - A fix for a crash introduced by a recent change to FP handling. - Revert a change to our idle code that left Power10 with no idle support. - One minor fix for the new scv system call path to set PPR. - Fix a crash in our "generic" PMU if branch stack events were enabled. - A fix for the IMC PMU, to correctly identify host kernel samples. - The ADB_PMU powermac code was found to be incompatible with VMAP_STACK, so make them incompatible in Kconfig until the code can be fixed. - A build fix in drivers/video/fbdev/controlfb.c, and a documentation fix. Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy, Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin, Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan Srinivasan. * tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check" powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc powerpc/perf: Fix crashes with generic_compat_pmu & BHRB powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode powerpc/64s: scv entry should set PPR Documentation/powerpc: fix malformed table in syscall64-abi video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n selftests/powerpc: Update PROT_SAO test to skip ISA 3.1 powerpc/64s: Disallow PROT_SAO in LPARs by default Revert "powerpc/64s: Remove PROT_SAO support"
2020-08-28powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMUChristophe Leroy
low_sleep_handler() can't restore the context from virtual stack because the stack can hardly be accessed with MMU OFF. For now, disable VMAP stack when CONFIG_ADB_PMU is selected. Fixes: cd08f109e262 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Cc: stable@vger.kernel.org # v5.6+ Reported-by: Giuseppe Sacco <giuseppe@sguazz.it> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ec96c15bfa1a7415ab604ee1c98cd45779c08be0.1598553015.git.christophe.leroy@csgroup.eu
2020-08-27Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"Pratik Rajesh Sampat
cpuidle stop state implementation has minor optimizations for P10 where hardware preserves more SPR registers compared to P9. The current P9 driver works for P10, although does few extra save-restores. P9 driver can provide the required power management features like SMT thread folding and core level power savings on a P10 platform. Until the P10 stop driver is available, revert the commit which allows for only P9 systems to utilize cpuidle and blocks all idle stop states for P10. CPU idle states are enabled and tested on the P10 platform with this fix. This reverts commit 8747bf36f312356f8a295a0c39ff092d65ce75ae. Fixes: 8747bf36f312 ("powerpc/powernv/idle: Replace CPU feature check with PVR check") Signed-off-by: Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200826082918.89306-1-psampat@linux.ibm.com
2020-08-27powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imcAthira Rajeev
IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the instruction pointer captured in each sample. The bits are fetched from the third double word of the trace record. Reading third double word from IMC trace record should use be64_to_cpu() along with READ_ONCE inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change. Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR HV is 1 and PR is 0 which means the address is from host counter. But using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to resolve the address -> symbol during "perf report" because perf tools side uses PERF_RECORD_MISC_KERNEL to represent the host counter data. Therefore, fix the trace imc sample data to use PERF_RECORD_MISC_KERNEL as cpumode for host kernel information. Fixes: 77ca3951cc37 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1598424029-1662-1-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-27powerpc/perf: Fix crashes with generic_compat_pmu & BHRBAlexey Kardashevskiy
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758d0c2 ("powerpc/perf: Add generic compat mode pmu driver") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200602025612.62707-1-aik@ozlabs.ru
2020-08-27powerpc/64s: Fix crash in load_fp_state() due to fpexc_modeMichael Ellerman
The recent commit 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf405cb-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf405cb-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb01877f33 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by: Milton Miller <miltonm@us.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
2020-08-27powerpc/64s: scv entry should set PPRNicholas Piggin
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry path missed this. Fixes: 7fa95f9adaee ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200825075309.224184-1-npiggin@gmail.com
2020-08-26lockdep: Only trace IRQ edgesNicholas Piggin
Problem: raw_local_irq_save(); // software state on local_irq_save(); // software state off ... local_irq_restore(); // software state still off, because we don't enable IRQs raw_local_irq_restore(); // software state still off, *whoopsie* existing instances: - lock_acquire() raw_local_irq_save() __lock_acquire() arch_spin_lock(&graph_lock) pv_wait() := kvm_wait() (same or worse for Xen/HyperV) local_irq_save() - trace_clock_global() raw_local_irq_save() arch_spin_lock() pv_wait() := kvm_wait() local_irq_save() - apic_retrigger_irq() raw_local_irq_save() apic->send_IPI() := default_send_IPI_single_phys() local_irq_save() Possible solutions: A) make it work by enabling the tracing inside raw_*() B) make it work by keeping tracing disabled inside raw_*() C) call it broken and clean it up now Now, given that the only reason to use the raw_* variant is because you don't want tracing. Therefore A) seems like a weird option (although it can be done). C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just because there is one raw user, this strips the validation/tracing off for all the other users. So we pick B) and declare any code that ends up doing: raw_local_irq_save() local_irq_save() lockdep_assert_irqs_disabled(); broken. AFAICT this problem has existed forever, the only reason it came up is because commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ state tracking") changed IRQ tracing vs lockdep recursion and the first instance is fairly common, the other cases hardly ever happen. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [rewrote changelog] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Marco Elver <elver@google.com> Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com
2020-08-24powerpc/64s: Disallow PROT_SAO in LPARs by defaultShawn Anastasio
Since migration of guests using SAO to ISA 3.1 hosts may cause issues, disable PROT_SAO in LPARs by default and introduce a new Kconfig option PPC_PROT_SAO_LPAR to allow users to enable it if desired. Signed-off-by: Shawn Anastasio <shawn@anastas.io> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200821185558.35561-3-shawn@anastas.io
2020-08-24Revert "powerpc/64s: Remove PROT_SAO support"Shawn Anastasio
This reverts commit 5c9fa16e8abd342ce04dc830c1ebb2a03abf6c05. Since PROT_SAO can still be useful for certain classes of software, reintroduce it. Concerns about guest migration for LPARs using SAO will be addressed next. Signed-off-by: Shawn Anastasio <shawn@anastas.io> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200821185558.35561-2-shawn@anastas.io
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23Merge tag 'powerpc-5.9-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Add perf support for emitting extended registers for power10. - A fix for CPU hotplug on pseries, where on large/loaded systems we may not wait long enough for the CPU to be offlined, leading to crashes. - Addition of a raw cputable entry for Power10, which is not required to boot, but is required to make our PMU setup work correctly in guests. - Three fixes for the recent changes on 32-bit Book3S to move modules into their own segment for strict RWX. - A fix for a recent change in our powernv PCI code that could lead to crashes. - A change to our perf interrupt accounting to avoid soft lockups when using some events, found by syzkaller. - A change in the way we handle power loss events from the hypervisor on pseries. We no longer immediately shut down if we're told we're running on a UPS. - A few other minor fixes. Thanks to Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Athira Rajeev, Christophe Leroy, Frederic Barrat, Greg Kurz, Kajol Jain, Madhavan Srinivasan, Michael Neuling, Michael Roth, Nageswara R Sastry, Oliver O'Halloran, Thiago Jung Bauermann, Vaidyanathan Srinivasan, Vasant Hegde. * tag 'powerpc-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driver powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000 powerpc/pseries: Do not initiate shutdown when system is running on UPS powerpc/perf: Fix soft lockups due to missed interrupt accounting powerpc/powernv/pci: Fix possible crash when releasing DMA resources powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU death powerpc/32s: Fix is_module_segment() when MODULES_VADDR is defined powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32 powerpc/fixmap: Fix the size of the early debug area powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabled powerpc/kernel: Cleanup machine check function declarations powerpc: Add POWER10 raw mode cputable entry powerpc/perf: Add extended regs support for power10 platform powerpc/perf: Add support for outputting extended regs in perf intr_regs powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 cores
2020-08-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - PAE and PKU bugfixes for x86 - selftests fix for new binutils - MMU notifier fix for arm64 * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set KVM: Pass MMU notifier range flags to kvm_unmap_hva_range() kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode KVM: x86: fix access code passed to gva_to_gpa selftests: kvm: Use a shorter encoding to clear RAX
2020-08-21KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()Will Deacon
The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: <stable@vger.kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will@kernel.org> Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21powerpc/perf/hv-24x7: Move cpumask file to top folder of hv-24x7 driverKajol Jain
Commit 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") added cpumask file as part of hv-24x7 driver inside the interface folder. The cpumask file is supposed to be in the top folder of the PMU driver in order to make hotplug work. This patch fixes that issue and creates new group 'cpumask_attr_group' to add cpumask file and make sure it added in top folder. command:# cat /sys/devices/hv_24x7/cpumask 0 Fixes: 792f73f747b8 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200821080610.123997-1-kjain@linux.ibm.com
2020-08-21powerpc/32s: Fix module loading failure when VMALLOC_END is over 0xf0000000Christophe Leroy
In is_module_segment(), when VMALLOC_END is over 0xf0000000, ALIGN(VMALLOC_END, SZ_256M) has value 0. In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always true then is_module_segment() always returns false. Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have value 0xffffffff and will be suitable for the comparison. Fixes: c49643319715 ("powerpc/32s: Only leave NX unset on segments used for modules") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/09fc73fe9c7423c6b4cf93f93df9bb0ed8eefab5.1597994047.git.christophe.leroy@csgroup.eu
2020-08-20powerpc/pseries: Do not initiate shutdown when system is running on UPSVasant Hegde
As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
2020-08-20powerpc/perf: Fix soft lockups due to missed interrupt accountingAthira Rajeev
Performance monitor interrupt handler checks if any counter has overflown and calls record_and_restart() in core-book3s which invokes perf_event_overflow() to record the sample information. Apart from creating sample, perf_event_overflow() also does the interrupt and period checks via perf_event_account_interrupt(). Currently we record information only if the SIAR (Sampled Instruction Address Register) valid bit is set (using siar_valid() check) and hence the interrupt check. But it is possible that we do sampling for some events that are not generating valid SIAR, and hence there is no chance to disable the event if interrupts are more than max_samples_per_tick. This leads to soft lockup. Fix this by adding perf_event_account_interrupt() in the invalid SIAR code path for a sampling event. ie if SIAR is invalid, just do interrupt check and don't record the sample information. Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1596717992-7321-1-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-20powerpc/powernv/pci: Fix possible crash when releasing DMA resourcesFrederic Barrat
Fix a typo introduced during recent code cleanup, which could lead to silently not freeing resources or an oops message (on PCI hotplug or CAPI reset). Only impacts ioda2, the code path for ioda1 is correct. Fixes: 01e12629af4e ("powerpc/powernv/pci: Add explicit tracking of the DMA setup state") Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200819130741.16769-1-fbarrat@linux.ibm.com
2020-08-18powerpc/pseries/hotplug-cpu: wait indefinitely for vCPU deathMichael Roth
For a power9 KVM guest with XIVE enabled, running a test loop where we hotplug 384 vcpus and then unplug them, the following traces can be seen (generally within a few loops) either from the unplugged vcpu: cpu 65 (hwid 65) Ready to die... Querying DEAD? cpu 66 (66) shows 2 list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ... CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1 NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000 ... NIP __list_del_entry_valid+0xac/0x100 LR __list_del_entry_valid+0xa8/0x100 Call Trace: __list_del_entry_valid+0xa8/0x100 (unreliable) free_pcppages_bulk+0x1f8/0x940 free_unref_page+0xd0/0x100 xive_spapr_cleanup_queue+0x148/0x1b0 xive_teardown_cpu+0x1bc/0x240 pseries_mach_cpu_die+0x78/0x2f0 cpu_die+0x48/0x70 arch_cpu_idle_dead+0x20/0x40 do_idle+0x2f4/0x4c0 cpu_startup_entry+0x38/0x40 start_secondary+0x7bc/0x8f0 start_secondary_prolog+0x10/0x14 or on the worker thread handling the unplug: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 BUG: Bad page state in process kworker/u768:3 pfn:95de1 cpu 314 (hwid 314) Ready to die... page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0x5ffffc00000000() raw: 005ffffc00000000 5deadbeef0000100 5deadbeef0000200 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ... CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1 Workqueue: pseries hotplug workque pseries_hp_work_fn Call Trace: dump_stack+0xb0/0xf4 (unreliable) bad_page+0x12c/0x1b0 free_pcppages_bulk+0x5bc/0x940 page_alloc_cpu_dead+0x118/0x120 cpuhp_invoke_callback.constprop.5+0xb8/0x760 _cpu_down+0x188/0x340 cpu_down+0x5c/0xa0 cpu_subsys_offline+0x24/0x40 device_offline+0xf0/0x130 dlpar_offline_cpu+0x1c4/0x2a0 dlpar_cpu_remove+0xb8/0x190 dlpar_cpu_remove_by_index+0x12c/0x150 dlpar_cpu+0x94/0x800 pseries_hp_work_fn+0x128/0x1e0 process_one_work+0x304/0x5d0 worker_thread+0xcc/0x7a0 kthread+0x1ac/0x1c0 ret_from_kernel_thread+0x5c/0x80 The latter trace is due to the following sequence: page_alloc_cpu_dead drain_pages drain_pages_zone free_pcppages_bulk where drain_pages() in this case is called under the assumption that the unplugged cpu is no longer executing. To ensure that is the case, and early call is made to __cpu_die()->pseries_cpu_die(), which runs a loop that waits for the cpu to reach a halted state by polling its status via query-cpu-stopped-state RTAS calls. It only polls for 25 iterations before giving up, however, and in the trace above this results in the following being printed only .1 seconds after the hotplug worker thread begins processing the unplug request: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 At that point the worker thread assumes the unplugged CPU is in some unknown/dead state and procedes with the cleanup, causing the race with the XIVE cleanup code executed by the unplugged CPU. Fix this by waiting indefinitely, but also making an effort to avoid spurious lockup messages by allowing for rescheduling after polling the CPU status and printing a warning if we wait for longer than 120s. Fixes: eac1e731b59ee ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> [mpe: Trim oopses in change log slightly for readability] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200811161544.10513-1-mdroth@linux.vnet.ibm.com
2020-08-18powerpc/32s: Fix is_module_segment() when MODULES_VADDR is definedChristophe Leroy
When MODULES_VADDR is defined, is_module_segment() shall check the address against it instead of checking agains VMALLOC_START. Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/07884ed033c31e074747b7eb8eaa329d15db07ec.1596641219.git.christophe.leroy@csgroup.eu
2020-08-18powerpc/kasan: Fix KASAN_SHADOW_START on BOOK3S_32Christophe Leroy
On BOOK3S_32, when we have modules and strict kernel RWX, modules are not in vmalloc space but in a dedicated segment that is below PAGE_OFFSET. So KASAN_SHADOW_START must take it into account. MODULES_VADDR can't be used because it is not defined yet in kasan.h Fixes: 6ca055322da8 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/6eddca2d5611fd57312a88eae31278c87a8fc99d.1596641224.git.christophe.leroy@csgroup.eu
2020-08-17powerpc/fixmap: Fix the size of the early debug areaChristophe Leroy
Commit ("03fd42d458fb powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") reworked the setup of the early debug area and mistakenly replaced 128 * 1024 by SZ_128. Change to SZ_128K to restore the original 128 kbytes size of the area. Fixes: 03fd42d458fb ("powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/996184974d674ff984643778cf1cdd7fe58cc065.1597644194.git.christophe.leroy@csgroup.eu
2020-08-17powerpc/pkeys: Fix build error with PPC_MEM_KEYS disabledAneesh Kumar K.V
IS_ENABLED() instead of #ifdef still requires variable declaration. In this specific case, default_uamor is declared in asm/pkeys.h which is only included if PPC_MEM_KEYS is enabled. arch/powerpc/mm/book3s64/hash_utils.c: In function ‘hash__early_init_mmu_secondary’: arch/powerpc/mm/book3s64/hash_utils.c:1119:21: error: ‘default_uamor’ undeclared (first use in this function) 1119 | mtspr(SPRN_UAMOR, default_uamor); | ^~~~~~~~~~~~~ Fixes: 6553fb799f60 ("powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817103301.158836-1-aneesh.kumar@linux.ibm.com
2020-08-17powerpc/kernel: Cleanup machine check function declarationsMadhavan Srinivasan
__machine_check_early_realmode_p*() are currently declared as extern in cputable.c and because of this when compiled with "C=1" (which enables semantic checker) produces these warnings. CHECK arch/powerpc/kernel/mce_power.c arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static? Patch here moves the declaration to asm/mce.h and includes the same in cputable.c Fixes: ae744f3432d3 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8") Fixes: 7b9f71f974a1 ("powerpc/64s: POWER9 machine check handler") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817005618.3305028-1-maddy@linux.ibm.com
2020-08-17powerpc: Add POWER10 raw mode cputable entryMadhavan Srinivasan
Add a raw mode cputable entry for POWER10. Copies most of the fields from commit a3ea40d5c736 ("powerpc: Add POWER10 architected mode") except for oprofile_cpu_type, machine_check_early, pvr_mask and pvr_mask fields. On bare metal systems we use DT CPU features, which doesn't need a cputable entry. But in VMs we still rely on the raw cputable entry to set the correct values for the PMU related fields. Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> [mpe: Reorder vs cleanup patch and add Fixes tag] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200817005618.3305028-2-maddy@linux.ibm.com
2020-08-17powerpc/perf: Add extended regs support for power10 platformAthira Rajeev
Include capability flag PERF_PMU_CAP_EXTENDED_REGS for power10 and expose MMCR3, SIER2, SIER3 registers as part of extended regs. Also introduce PERF_REG_PMU_MASK_31 to define extended mask value at runtime for power10. Suggested-by: Ryan Grimm <grimm@linux.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <nasastry@in.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1596794701-23530-3-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-17powerpc/perf: Add support for outputting extended regs in perf intr_regsAnju T Sudhakar
Add support for perf extended register capability in powerpc. The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to indicate the PMU which support extended registers. The generic code define the mask of extended registers as 0 for non supported architectures. Patch adds extended regs support for power9 platform by exposing MMCR0, MMCR1 and MMCR2 registers. REG_RESERVED mask needs update to include extended regs. PERF_REG_EXTENDED_MASK, contains mask value of the supported registers, is defined at runtime in the kernel based on platform since the supported registers may differ from one processor version to another and hence the MASK value. With the patch: available registers: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r26 r27 r28 r29 r30 r31 nip msr orig_r3 ctr link xer ccr softe trap dar dsisr sier mmcra mmcr0 mmcr1 mmcr2 PERF_RECORD_SAMPLE(IP, 0x1): 4784/4784: 0 period: 1 addr: 0 ... intr regs: mask 0xffffffffffff ABI 64-bit .... r0 0xc00000000012b77c .... r1 0xc000003fe5e03930 .... r2 0xc000000001b0e000 .... r3 0xc000003fdcddf800 .... r4 0xc000003fc7880000 .... r5 0x9c422724be .... r6 0xc000003fe5e03908 .... r7 0xffffff63bddc8706 .... r8 0x9e4 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0xc0000000001299c0 .... r13 0xc000003ffffc4800 .... r14 0x0 .... r15 0x7fffdd8b8b00 .... r16 0x0 .... r17 0x7fffdd8be6b8 .... r18 0x7e7076607730 .... r19 0x2f .... r20 0xc00000001fc26c68 .... r21 0xc0002041e4227e00 .... r22 0xc00000002018fb60 .... r23 0x1 .... r24 0xc000003ffec4d900 .... r25 0x80000000 .... r26 0x0 .... r27 0x1 .... r28 0x1 .... r29 0xc000000001be1260 .... r30 0x6008010 .... r31 0xc000003ffebb7218 .... nip 0xc00000000012b910 .... msr 0x9000000000009033 .... orig_r3 0xc00000000012b86c .... ctr 0xc0000000001299c0 .... link 0xc00000000012b77c .... xer 0x0 .... ccr 0x28002222 .... softe 0x1 .... trap 0xf00 .... dar 0x0 .... dsisr 0x80000000000 .... sier 0x0 .... mmcra 0x80000000000 .... mmcr0 0x82008090 .... mmcr1 0x1e000000 .... mmcr2 0x0 ... thread: perf:4784 Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Nageswara R Sastry <nasastry@in.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1596794701-23530-2-git-send-email-atrajeev@linux.vnet.ibm.com
2020-08-17powerpc: Fix P10 PVR revision in /proc/cpuinfo for SMT4 coresMichael Neuling
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4. Without this patch, /proc/cpuinfo on a SMT4 DD1 POWER10 looks like this: cpu : POWER10, altivec supported revision : 17.0 (pvr 0080 1100) Fixes: a3ea40d5c736 ("powerpc: Add POWER10 architected mode") Cc: stable@vger.kernel.org # v5.8 Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200803035600.1820371-1-mikey@neuling.org
2020-08-14iomap: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
Patch series "iomap: Constify ioreadX() iomem argument", v3. The ioread8/16/32() and others have inconsistent interface among the architectures: some taking address as const, some not. It seems there is nothing really stopping all of them to take pointer to const. This patch (of 4): The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. [krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()] Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org [akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c] Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Allen Hubbe <allenbh@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14all arch: remove system call sys_sysctlXiaoming Ni
Since commit 61a47c1ad3a4dc ("sysctl: Remove the sysctl system call"), sys_sysctl is actually unavailable: any input can only return an error. We have been warning about people using the sysctl system call for years and believe there are no more users. Even if there are users of this interface if they have not complained or fixed their code by now they probably are not going to, so there is no point in warning them any longer. So completely remove sys_sysctl on all architectures. [nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu] Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Will Deacon <will@kernel.org> [arm/arm64] Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bin Meng <bin.meng@windriver.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: chenzefeng <chenzefeng2@huawei.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christian Brauner <christian@brauner.io> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Diego Elio Pettenò <flameeyes@flameeyes.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kars de Jong <jongk@linux-m68k.org> Cc: Kees Cook <keescook@chromium.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miklos Szeredi <mszeredi@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Nick Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Olof Johansson <olof@lixom.net> Cc: Paul Burton <paulburton@kernel.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Sami Tolvanen <samitolvanen@google.com> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Sven Schnelle <svens@stackframe.org> Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com> Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14Merge tag 'powerpc-5.9-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a boot crash on some platforms introduced by the recent pkey refactoring. Thanks to Christian Zigotzky and Aneesh Kumar K.V" * tag 'powerpc-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)
2020-08-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Paolo Bonzini: "PPC: - Improvements and bugfixes for secure VM support, giving reduced startup time and memory hotplug support. - Locking fixes in nested KVM code - Increase number of guests supported by HV KVM to 4094 - Preliminary POWER10 support ARM: - Split the VHE and nVHE hypervisor code bases, build the EL2 code separately, allowing for the VHE code to now be built with instrumentation - Level-based TLB invalidation support - Restructure of the vcpu register storage to accomodate the NV code - Pointer Authentication available for guests on nVHE hosts - Simplification of the system register table parsing - MMU cleanups and fixes - A number of post-32bit cleanups and other fixes MIPS: - compilation fixes x86: - bugfixes - support for the SERIALIZE instruction" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits) KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup x86/kvm/hyper-v: Synic default SCONTROL MSR needs to be enabled MIPS: KVM: Convert a fallthrough comment to fallthrough MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64 x86: Expose SERIALIZE for supported cpuid KVM: x86: Don't attempt to load PDPTRs when 64-bit mode is enabled KVM: arm64: Move S1PTW S2 fault logic out of io_mem_abort() KVM: arm64: Don't skip cache maintenance for read-only memslots KVM: arm64: Handle data and instruction external aborts the same way KVM: arm64: Rename kvm_vcpu_dabt_isextabt() KVM: arm: Add trace name for ARM_NISV KVM: arm64: Ensure that all nVHE hyp code is in .hyp.text KVM: arm64: Substitute RANDOMIZE_BASE for HARDEN_EL2_VECTORS KVM: arm64: Make nVHE ASLR conditional on RANDOMIZE_BASE KVM: PPC: Book3S HV: Rework secure mem slot dropping KVM: PPC: Book3S HV: Move kvmppc_svm_page_out up KVM: PPC: Book3S HV: Migrate hot plugged memory KVM: PPC: Book3S HV: In H_SVM_INIT_DONE, migrate remaining normal-GFNs to secure-GFNs KVM: PPC: Book3S HV: Track the state GFNs associated with secure VMs KVM: PPC: Book3S HV: Disable page merging in H_SVM_INIT_START ...
2020-08-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ...
2020-08-12mm: clean up the last pieces of page fault accountingsPeter Xu
Here're the last pieces of page fault accounting that were still done outside handle_mm_fault() where we still have regs==NULL when calling handle_mm_fault(): arch/powerpc/mm/copro_fault.c: copro_handle_mm_fault arch/sparc/mm/fault_32.c: force_user_fault arch/um/kernel/trap.c: handle_page_fault mm/gup.c: faultin_page fixup_user_fault mm/hmm.c: hmm_vma_fault mm/ksm.c: break_ksm Some of them has the issue of duplicated accounting for page fault retries. Some of them didn't do the accounting at all. This patch cleans all these up by letting handle_mm_fault() to do per-task page fault accounting even if regs==NULL (though we'll still skip the perf event accountings). With that, we can safely remove all the outliers now. There's another functional change in that now we account the page faults to the caller of gup, rather than the task_struct that passed into the gup code. More information of this can be found at [1]. After this patch, below things should never be touched again outside handle_mm_fault(): - task_struct.[maj|min]_flt - PERF_COUNT_SW_PAGE_FAULTS_[MAJ|MIN] [1] https://lore.kernel.org/lkml/CAHk-=wj_V2Tps2QrMn20_W0OJF9xqNh52XSGA42s-ZJ8Y+GyKw@mail.gmail.com/ Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-25-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm/powerpc: use general page fault accountingPeter Xu
Use the general page fault accounting by passing regs into handle_mm_fault(). Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/20200707225021.200906-17-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12mm: do page fault accounting in handle_mm_faultPeter Xu
Patch series "mm: Page fault accounting cleanups", v5. This is v5 of the pf accounting cleanup series. It originates from Gerald Schaefer's report on an issue a week ago regarding to incorrect page fault accountings for retried page fault after commit 4064b9827063 ("mm: allow VM_FAULT_RETRY for multiple times"): https://lore.kernel.org/lkml/20200610174811.44b94525@thinkpad/ What this series did: - Correct page fault accounting: we do accounting for a page fault (no matter whether it's from #PF handling, or gup, or anything else) only with the one that completed the fault. For example, page fault retries should not be counted in page fault counters. Same to the perf events. - Unify definition of PERF_COUNT_SW_PAGE_FAULTS: currently this perf event is used in an adhoc way across different archs. Case (1): for many archs it's done at the entry of a page fault handler, so that it will also cover e.g. errornous faults. Case (2): for some other archs, it is only accounted when the page fault is resolved successfully. Case (3): there're still quite some archs that have not enabled this perf event. Since this series will touch merely all the archs, we unify this perf event to always follow case (1), which is the one that makes most sense. And since we moved the accounting into handle_mm_fault, the other two MAJ/MIN perf events are well taken care of naturally. - Unify definition of "major faults": the definition of "major fault" is slightly changed when used in accounting (not VM_FAULT_MAJOR). More information in patch 1. - Always account the page fault onto the one that triggered the page fault. This does not matter much for #PF handlings, but mostly for gup. More information on this in patch 25. Patchset layout: Patch 1: Introduced the accounting in handle_mm_fault(), not enabled. Patch 2-23: Enable the new accounting for arch #PF handlers one by one. Patch 24: Enable the new accounting for the rest outliers (gup, iommu, etc.) Patch 25: Cleanup GUP task_struct pointer since it's not needed any more This patch (of 25): This is a preparation patch to move page fault accountings into the general code in handle_mm_fault(). This includes both the per task flt_maj/flt_min counters, and the major/minor page fault perf events. To do this, the pt_regs pointer is passed into handle_mm_fault(). PERF_COUNT_SW_PAGE_FAULTS should still be kept in per-arch page fault handlers. So far, all the pt_regs pointer that passed into handle_mm_fault() is NULL, which means this patch should have no intented functional change. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200707225021.200906-1-peterx@redhat.com Link: http://lkml.kernel.org/r/20200707225021.200906-2-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12uaccess: remove segment_eqChristoph Hellwig
segment_eq is only used to implement uaccess_kernel. Just open code uaccess_kernel in the arch uaccess headers and remove one layer of indirection. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Link: http://lkml.kernel.org/r/20200710135706.537715-5-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-11Merge tag 'iommu-updates-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Remove of the dev->archdata.iommu (or similar) pointers from most architectures. Only Sparc is left, but this is private to Sparc as their drivers don't use the IOMMU-API. - ARM-SMMU updates from Will Deacon: - Support for SMMU-500 implementation in Marvell Armada-AP806 SoC - Support for SMMU-500 implementation in NVIDIA Tegra194 SoC - DT compatible string updates - Remove unused IOMMU_SYS_CACHE_ONLY flag - Move ARM-SMMU drivers into their own subdirectory - Intel VT-d updates from Lu Baolu: - Misc tweaks and fixes for vSVA - Report/response page request events - Cleanups - Move the Kconfig and Makefile bits for the AMD and Intel drivers into their respective subdirectory. - MT6779 IOMMU Support - Support for new chipsets in the Renesas IOMMU driver - Other misc cleanups and fixes (e.g. to improve compile test coverage) * tag 'iommu-updates-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (77 commits) iommu/amd: Move Kconfig and Makefile bits down into amd directory iommu/vt-d: Move Kconfig and Makefile bits down into intel directory iommu/arm-smmu: Move Arm SMMU drivers into their own subdirectory iommu/vt-d: Skip TE disabling on quirky gfx dedicated iommu iommu: Add gfp parameter to io_pgtable_ops->map() iommu: Mark __iommu_map_sg() as static iommu/vt-d: Rename intel-pasid.h to pasid.h iommu/vt-d: Add page response ops support iommu/vt-d: Report page request faults for guest SVA iommu/vt-d: Add a helper to get svm and sdev for pasid iommu/vt-d: Refactor device_to_iommu() helper iommu/vt-d: Disable multiple GPASID-dev bind iommu/vt-d: Warn on out-of-range invalidation address iommu/vt-d: Fix devTLB flush for vSVA iommu/vt-d: Handle non-page aligned address iommu/vt-d: Fix PASID devTLB invalidation iommu/vt-d: Remove global page support in devTLB flush iommu/vt-d: Enforce PASID devTLB field mask iommu: Make some functions static iommu/amd: Remove double zero check ...
2020-08-10powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)Aneesh Kumar K.V
On p6 and before we should avoid updating UAMOR SPRN. This resulted in boot failure on Nemo board. Fixes: 269e829f48a0 ("powerpc/book3s64/pkey: Disable pkey on POWER6 and before") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200810102623.685083-1-aneesh.kumar@linux.ibm.com
2020-08-09Merge tag 'kbuild-v5.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - run the checker (e.g. sparse) after the compiler - remove unneeded cc-option tests for old compiler flags - fix tar-pkg to install dtbs - introduce ccflags-remove-y and asflags-remove-y syntax - allow to trace functions in sub-directories of lib/ - introduce hostprogs-always-y and userprogs-always-y syntax - various Makefile cleanups * tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled kbuild: introduce hostprogs-always-y and userprogs-always-y kbuild: sort hostprogs before passing it to ifneq kbuild: move host .so build rules to scripts/gcc-plugins/Makefile kbuild: Replace HTTP links with HTTPS ones kbuild: trace functions in subdirectories of lib/ kbuild: introduce ccflags-remove-y and asflags-remove-y kbuild: do not export LDFLAGS_vmlinux kbuild: always create directories of targets powerpc/boot: add DTB to 'targets' kbuild: buildtar: add dtbs support kbuild: remove cc-option test of -ffreestanding kbuild: remove cc-option test of -fno-stack-protector Revert "kbuild: Create directory for target DTB" kbuild: run the checker after the compiler
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 07:43:08 +0000