summaryrefslogtreecommitdiff
path: root/arch/powerpc/xmon
AgeCommit message (Collapse)Author
2018-03-31Merge branch 'topic/paca' into nextMichael Ellerman
Bring in yet another series that touches KVM code, and might need to be merged into the kvm-ppc branch to resolve conflicts. This required some changes in pnv_power9_force_smt4_catch/release() due to the paca array becomming an array of pointers.
2018-03-30powerpc/64: Use array of paca pointers and allocate pacas individuallyNicholas Piggin
Change the paca array into an array of pointers to pacas. Allocate pacas individually. This allows flexibility in where the PACAs are allocated. Future work will allocate them node-local. Platforms that don't have address limits on PACAs would be able to defer PACA allocations until later in boot rather than allocate all possible ones up-front then freeing unused. This is slightly more overhead (one additional indirection) for cross CPU paca references, but those aren't too common. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-27Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge the DAWR series, which touches arch code and KVM code and may need to be merged into the kvm-ppc tree.
2018-03-27powerpc: Update xmon to use ppc_breakpoint_available()Michael Neuling
The 'bd' command will now print an error and not set the breakpoint on P9. Signed-off-by: Michael Neuling <mikey@neuling.org> [mpe: Unsplit quoted string] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13powerpc/xmon: Move empty plpar_set_ciabr() into plpar_wrappers.hMichael Ellerman
Now that plpar_wrappers.h has an #ifdef PSERIES we can move the empty version of plpar_set_ciabr() which xmon wants into there. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13powerpc: Rename plapr routines to plparMichael Ellerman
Back in 2013 we added some hypercall wrappers which misspelled "plpar" (P-series Logical PARtition) as "plapr". Visually they're hard to distinguish and it almost doesn't matter, but it is confusing when grepping to miss some calls because of the typo. They've also started spreading, so before they take over let's fix them all to be "plpar". Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13powerpc/xmon: Clear all breakpoints when xmon is disabled via debugfsVaibhav Jain
Presently when xmon is disabled by debugfs any existing instruction/data-access breakpoints set are not disabled. This may lead to kernel oops when those breakpoints are hit as the necessary debugger hooks aren't installed. Hence this patch introduces a new function named clear_all_bpt() which is called when xmon is disabled via debugfs. The function will unpatch/clear all the trap and ciabr/dab based breakpoints. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Fix build break when CONFIG_DEBUG_FS=n] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13powerpc/xmon: Setup debugger hooks when first break-point is setVaibhav Jain
Presently sysrq key for xmon('x') is registered during kernel init irrespective of the value of kernel param 'xmon'. Thus xmon is enabled even if 'xmon=off' is passed on the kernel command line. However this doesn't enable the kernel debugger hooks needed for instruction or data breakpoints. Thus when a break-point is hit with xmon=off a kernel oops of the form below is reported: Oops: Exception in kernel mode, sig: 5 [#1] < snip > Trace/breakpoint trap To fix this the patch checks and enables debugger hooks when an instruction or data break-point is set via xmon console. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> [mpe: Just printf directly, no need for static const char[]] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-23powerpc/64s: Improve RFI L1-D cache flush fallbackNicholas Piggin
The fallback RFI flush is used when firmware does not provide a way to flush the cache. It's a "displacement flush" that evicts useful data by displacing it with an uninteresting buffer. The flush has to take care to work with implementation specific cache replacment policies, so the recipe has been in flux. The initial slow but conservative approach is to touch all lines of a congruence class, with dependencies between each load. It has since been determined that a linear pattern of loads without dependencies is sufficient, and is significantly faster. Measuring the speed of a null syscall with RFI fallback flush enabled gives the relative improvement: P8 - 1.83x P9 - 1.75x The flush also becomes simpler and more adaptable to different cache geometries. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21powerpc/xmon: Do not compute/store the major opcodeMathieu Malaterre
In commit 5b102782c7f4 ("powerpc/xmon: Enable disassembly files (compilation changes)") usage of variable `op` has been removed. Completely remove opcode computation since not used anymore. Fix fatal warning: arch/powerpc/xmon/ppc-dis.c: In function ‘lookup_powerpc’: arch/powerpc/xmon/ppc-dis.c:96:17: error: variable ‘op’ set but not used [-Werror=unused-but-set-variable] unsigned long op; ^~ Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21Merge branch 'fixes' into nextMichael Ellerman
Merge our fixes branch from the 4.15 cycle. Unusually the fixes branch saw some significant features merged, notably the RFI flush patches, so we want the code in next to be tested against that, to avoid any surprises when the two are merged. There's also some other work on the panic handling that was reverted in fixes and we now want to do properly in next, which would conflict. And we also fix a few other minor merge conflicts.
2018-01-19powerpc/64: Rename soft_enabled to irq_soft_maskMadhavan Srinivasan
Rename the paca->soft_enabled to paca->irq_soft_mask as it is no longer used as a flag for interrupt state, but a mask. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-11powerpc/xmon: Don't print hashed pointers in paca dumpMichael Ellerman
Remember when the biggest problem we had to worry about was hashed pointers, those were the days. These were missed in my earlier patch because they don't match "%p", but the macro is hiding a "%p", so these all end up being hashed, which is not what we want in xmon. Convert them to "%px". Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-11powerpc/xmon: Add RFI flush related fields to paca dumpMichael Ellerman
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-07powerpc/xmon: Don't print hashed pointers in xmonMichael Ellerman
Since commit ad67b74d2469 ("printk: hash addresses printed with %p") pointers printed with %p are hashed, ie. you don't see the actual pointer value but rather a cryptographic hash of its value. In xmon we want to see the actual pointer values, because xmon is a debugger, so replace %p with %px which prints the actual pointer value. We justify doing this in xmon because 1) xmon is a kernel crash debugger, it's only accessible via the console 2) xmon doesn't print to dmesg, so the pointers it prints are not able to be leaked that way. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-16Merge tag 'powerpc-4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "A bit of a small release, I suspect in part due to me travelling for KS. But my backlog of patches to review is smaller than usual, so I think in part folks just didn't send as much this cycle. Non-highlights: - Five fixes for the >128T address space handling, both to fix bugs in our implementation and to bring the semantics exactly into line with x86. Highlights: - Support for a new OPAL call on bare metal machines which gives us a true NMI (ie. is not masked by MSR[EE]=0) for debugging etc. - Support for Power9 DD2 in the CXL driver. - Improvements to machine check handling so that uncorrectable errors can be reported into the generic memory_failure() machinery. - Some fixes and improvements for VPHN, which is used under PowerVM to notify the Linux partition of topology changes. - Plumbing to enable TM (transactional memory) without suspend on some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND). - Support for emulating vector loads form cache-inhibited memory, on some Power9 revisions. - Disable the fast-endian switch "syscall" by default (behind a CONFIG), we believe it has never had any users. - A major rework of the API drivers use when initiating and waiting for long running operations performed by OPAL firmware, and changes to the powernv_flash driver to use the new API. - Several fixes for the handling of FP/VMX/VSX while processes are using transactional memory. - Optimisations of TLB range flushes when using the radix MMU on Power9. - Improvements to the VAS facility used to access coprocessors on Power9, and related improvements to the way the NX crypto driver handles requests. - Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit. Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard, Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley, Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu, Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee, Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A. Kennington III" * tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits) powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature powerpc/64s: Fix masking of SRR1 bits on instruction fault powerpc/64s: mm_context.addr_limit is only used on hash powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary powerpc/64s/hash: Fix fork() with 512TB process address space powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation powerpc/64s/hash: Fix 512T hint detection to use >= 128T powerpc: Fix DABR match on hash based systems powerpc/signal: Properly handle return value from uprobe_deny_signal() powerpc/fadump: use kstrtoint to handle sysfs store powerpc/lib: Implement UACCESS_FLUSHCACHE API powerpc/lib: Implement PMEM API powerpc/powernv/npu: Don't explicitly flush nmmu tlb powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm() powerpc/powernv/idle: Round up latency and residency values powerpc/kprobes: refactor kprobe_lookup_name for safer string operations powerpc/kprobes: Blacklist emulate_update_regs() from kprobes powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace powerpc/kprobes: Disable preemption before invoking probe handler for optprobes ...
2017-11-08powerpc/xmon: Support dumping software pagetablesBalbir Singh
It would be nice to be able to dump page tables in a particular context. eg: dumping vmalloc space: 0:mon> dv 0xd00037fffff00000 pgd @ 0xc0000000017c0000 pgdp @ 0xc0000000017c00d8 = 0x00000000f10b1000 pudp @ 0xc0000000f10b13f8 = 0x00000000f10d0000 pmdp @ 0xc0000000f10d1ff8 = 0x00000000f1102000 ptep @ 0xc0000000f1102780 = 0xc0000000f1ba018e Maps physical address = 0x00000000f1ba0000 Flags = Accessed Dirty Read Write This patch does not replicate the complex code of dump_pagetable and has no support for bolted linear mapping, thats why I've it's called dump virtual page table support. The format of the PTE can be expanded even further to add more useful information about the flags in the PTE if required. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Bike shed the output format, show the pgdir, fix build failures] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-06powerpc/64s: Replace CONFIG_PPC_STD_MMU_64 with CONFIG_PPC_BOOK3S_64Michael Ellerman
CONFIG_PPC_STD_MMU_64 indicates support for the "standard" powerpc MMU on 64-bit CPUs. The "standard" MMU refers to the hash page table MMU found in "server" processors, from IBM mainly. Currently CONFIG_PPC_STD_MMU_64 is == CONFIG_PPC_BOOK3S_64. While it's annoying to have two symbols that always have the same value, it's not quite annoying enough to bother removing one. However with the arrival of Power9, we now have the situation where CONFIG_PPC_STD_MMU_64 is enabled, but the kernel is running using the Radix MMU - *not* the "standard" MMU. So it is now actively confusing to use it, because it implies that code is disabled or inactive when the Radix MMU is in use, however that is not necessarily true. So s/CONFIG_PPC_STD_MMU_64/CONFIG_PPC_BOOK3S_64/, and do some minor formatting updates of some of the affected lines. This will be a pain for backports, but c'est la vie. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-22powerpc/xmon: Add kstack base to paca dumpMichael Ellerman
When dumping the paca in xmon we currently show kstack. Although it's not hard it's a bit fiddly to work out what the bounds of the kernel stack should be based on the kstack value. To make life easier and "kstack_base" which is the base (lowest address) of the kernel stack, eg: kstack = 0xc0000000f1a7be30 (0x258) kstack_base = 0xc0000000f1a78000 Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-22powerpc/xmon: Check before calling xive functionsBreno Leitao
Currently xmon could call XIVE functions from OPAL even if the XIVE is disabled or does not exist in the system, as in POWER8 machines. This causes the following exception: 1:mon> dx cpu 0x1: Vector: 700 (Program Check) at [c000000423c93450] pc: c00000000009cfa4: opal_xive_dump+0x50/0x68 lr: c0000000000997b8: opal_return+0x0/0x50 This patch simply checks if XIVE is enabled before calling XIVE functions. Fixes: 243e25112d06 ("powerpc/xive: Native exploitation of the XIVE interrupt controller") Suggested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-06powerpc/xmon: Add option to show uptime informationGuilherme G. Piccoli
It might be useful to quickly get the uptime of a running system on xmon, without needing to grab data from memory and doing math on struct addresses. For example, it'd be useful to check for how long after a crash a system is on xmon shell or if some test was started after the first test crashed (and this 2nd test crashed too into xmon). This small patch adds the 'U' command, to accomplish this. Suggested-by: Murilo Fossa Vicentini <muvic@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> [mpe: Display units (seconds), add sync()/__delay() sequence] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-04powerpc/xmon: Avoid tripping SMP hardlockup watchdogNicholas Piggin
The SMP hardlockup watchdog cross-checks other CPUs for lockups, which causes xmon headaches because it's assuming interrupts hard disabled means no watchdog troubles. Try to improve that by calling touch_nmi_watchdog() in obvious places where secondaries are spinning. Also annotate these spin loops with spin_begin/end calls. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/xmon: Add ISA v3.0 SPRs to SPR dumpBalbir Singh
Add support for printing the PIDR/TIDR for ISA 300 and PSSCR and PTCR in ISA 3.0 hypervisor mode. SPRN_PSSCR_PR is the privileged mode access and is used when we are not in hypervisor mode. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/xmon: Add AMR, UAMOR, AMOR, IAMR to SPR dumpBalbir Singh
This patch adds support to xmon for dumping the AMR, UAMOR, AMOR and IAMR SPRs based on their supported ISA revisions. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/xmon: Dump all 64 bits of HDECBalbir Singh
ISA 3.0 defines hypervisor decrementer to be 64 bits in length. This patch extends the print format for to be 64 bits. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-31powerpc/xmon: Fix display of SPRsBalbir Singh
Convert 0.16x to 0.16lx. Otherwise we lose the top 8 nibbles and effectively print only the last 32 bits. Fixes: 1846193b178d ("powerpc/xmon: Dump ISA 2.06 SPRs") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-15powerpc/xmon: Exclude all of xmon from ftraceNaveen N. Rao
Exclude core xmon files from ftrace (along with an xmon xive helper outside of xmon/) to minimize impact of ftrace while within xmon. Before: /sys/kernel/debug/tracing# grep -ci xmon available_filter_functions 26 After: /sys/kernel/debug/tracing# grep -ci xmon available_filter_functions 0 Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Use $(subst ..) on KBUILD_CFLAGS rather than CFLAGS_REMOVE_xxx] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14powerpc/xmon: Disable tracing when entering xmonBreno Leitao
If tracing is enabled and you get into xmon, the tracing buffer continues to be updated, causing possible loss of data and unnecessary tracing information coming from xmon functions. This patch simple disables tracing when entering xmon, and re-enables it if the kernel is resumed (with 'x'). Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-14powerpc/xmon: Dump ftrace buffers for the current CPU onlyBreno Leitao
Current xmon 'dt' command dumps the tracing buffer for all the CPUs, which makes it very hard to read due to the fact that most of powerpc machines currently have many CPUs. Other than that, the CPU lines are interleaved in the ftrace log. This new option just dumps the ftrace buffer for the current CPU. Signed-off-by: Breno Leitao <leitao@debian.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-07-03powerpc/xmon: Add patch_instruction() support for xmonBalbir Singh
Move from mwrite() to patch_instruction() for xmon for breakpoint addition and removal. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-30powerpc/xmon: Fix compile error with PPC_8xx=yNicholas Piggin
Rearrange the code so that mode and badaddr are only defined when they're used. Also unsplit the string for easier grepping, and switch from CONFIG_8xx which is deprecated to CONFIG_PPC_8xx. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-01powerpc/xmon: Teach xmon oops about radix vectorsMichael Neuling
Currently if we take an oops caused by an 0x380 or 0x480 exception, we get a print which assumes SLB problems. With radix, these vectors have different meanings. This patch updates the oops message to reflect these different meanings. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc/xmon: Wait for secondaries before IPI'ing on system resetNicholas Piggin
An externally triggered system reset (e.g., via QEMU nmi command, or pseries reset button) can cause system reset interrupts on all CPUs. In case this causes xmon to be entered, it is undesirable for the primary (first) CPU into xmon to trigger an NMI IPI to others, because this may cause a nested system reset interrupt. So spin for a time waiting for secondaries to join xmon before performing the NMI IPI, similarly to what the crash dump code does. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Only do it when we come in from system reset, not via sysrq etc.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc/64s: Dedicated system reset interrupt stackNicholas Piggin
The system reset interrupt is used for crash/debug situations, so it is desirable to have as little impact on the normal state of the system as possible. Currently it uses the current kernel stack to process the exception. This stores into the stack which may be involved with the crash. The stack pointer may be corrupted, or it may have overflowed. Avoid or minimise these problems by creating a dedicated NMI stack for the system reset interrupt to use. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc/64s: Disallow system reset vs system reset reentrancyNicholas Piggin
In preparation for using a dedicated stack for system reset interrupts, prevent a nested system reset from recovering, in order to simplify code that is called in crash/debug path. This allows a system reset interrupt to just use the base stack pointer. Keep an in_nmi nesting counter similarly to the in_mce counter. Consider the interrrupt non-recoverable if it is taken inside another system reset. Interrupt nesting could be allowed similarly to MCE, but system reset is a special case that's not for normal operation, so simplicity wins until there is requirement for nested system reset interrupts. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-25powerpc/xmon: Deindent the SLB dumping logicMichael Ellerman
Currently the code that dumps SLB entries uses a double-nested if. This means the actual dumping logic is a bit squashed. Deindent it by using continue. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-12Merge branch 'topic/xive' (early part) into nextMichael Ellerman
This merges the arch part of the XIVE support, leaving the final commit with the KVM specific pieces dangling on the branch for Paul to merge via the kvm-ppc tree.
2017-04-11powerpc: Create asm/debugfs.h and move powerpc_debugfs_root thereMichael Ellerman
powerpc_debugfs_root is the dentry representing the root of the "powerpc" directory tree in debugfs. Currently it sits in asm/debug.h, a long with some other things that have "debug" in the name, but are otherwise unrelated. Pull it out into a separate header, which also includes linux/debugfs.h, and convert all the users to include debugfs.h instead of debug.h. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-10powerpc/xive: Native exploitation of the XIVE interrupt controllerBenjamin Herrenschmidt
The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc/xmon: add debugfs entry for xmonGuilherme G. Piccoli
Currently the xmon debugger is set only via kernel boot command-line. It's disabled by default, and can be enabled with "xmon=on" on the command-line. Also, xmon may be accessed via sysrq mechanism. But we cannot enable/disable xmon in runtime, it needs kernel reload. This patch introduces a debugfs entry for xmon, allowing user to query its current state and change it if desired. Basically, the "xmon" file to read from/write to is under the debugfs mount point, on powerpc directory. It's a simple attribute, value 0 meaning xmon is disabled and value 1 the opposite. Writing these states to the file will take immediate effect in the debugger. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc/xmon: drop the nobt option from xmon plus minor fixesGuilherme G. Piccoli
The xmon parameter nobt was added long time ago, by commit 26c8af5f01df ("[POWERPC] print backtrace when entering xmon"). The problem that time was that during a crash in a machine with USB keyboard, xmon wouldn't respond to commands from the keyboard, so printing the backtrace wouldn't be possible. Idea then was to show automatically the backtrace on xmon crash for the first time it's invoked (if it recovers, next time xmon won't show backtrace automatically). The nobt parameter was added _only_ to prevent this automatic trace show. Seems long time ago USB keyboards didn't work that well! We don't need this parameter anymore, the feature of auto showing the backtrace is interesting (imagine a case of auto-reboot script), so this patch extends the functionality, by always showing the backtrace automatically when xmon is invoked; it removes the nobt parameter too. Also, this patch fixes __initdata placement on xmon_early and replaces __initcall() with modern device_initcall() on sysrq handler. Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-28powerpc/xmon: Fix an unexpected xmon on/off state changePan Xinhui
Once xmon is triggered by sysrq-x, it is enabled always afterwards even if it is disabled during boot. This will cause a system reset interrupt fail to dump. So keep xmon in its original state after exit. We have several ways to set xmon on or off. 1) by a build config CONFIG_XMON_DEFAULT. 2) by a boot cmdline with xmon or xmon=early or xmon=on to enable xmon and xmon=off to disable xmon. This value will override that in step 1. 3) by a debugfs interface, as proposed in this patchset. And this value can override those in step 1 and 2. Signed-off-by: Pan Xinhui <xinhui.pan@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01Merge tag 'powerpc-4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Highlights include: - an update of the disassembly code used by xmon to the latest versions in binutils. We've received permission from all the authors of the relevant binutils changes to relicense their changes to the relevant files from GPLv3 to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg work to get permission from everyone. - addition of the "architected" Power9 CPU table entry, allowing us to boot in Power9 architected mode under a hypervisor. - updates to the Power9 PMU code. - implementation of clear_bit_unlock_is_negative_byte() to optimise unlock_page(). - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf, t1042rdb display support, and board updates." Thanks to: Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith" * tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc: Remove leftover cputime_to_nsecs call causing build error powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU powerpc/optprobes: Fix TOC handling in optprobes trampoline powerpc/pseries: Advertise Hot Plug Event support to firmware cxl: fix nested locking hang during EEH hotplug powerpc/xmon: Dump memory in CPU endian format powerpc/pseries: Revert 'Auto-online hotplugged memory' powerpc/powernv: Make PCI non-optional powerpc/64: Implement clear_bit_unlock_is_negative_byte() powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable() powerpc/kernel: Remove error message in pcibios_setup_phb_resources() powerpc/mm: Fix typo in set_pte_at() pci/hotplug/pnv-php: Disable MSI and PCI device properly pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot() powerpc: Add POWER9 architected mode to cputable powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags() powerpc/perf: Avoid FAB_*_MATCH checks for power9 powerpc/perf: Add restrictions to PMC5 in power9 DD1 powerpc/perf: Use Instruction Counter value ...
2017-02-27scripts/spelling.txt: add "an user" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: an user||a user an userspace||a userspace I also added "userspace" to the list since it is a common word in Linux. I found some instances for "an userfaultfd", but I did not add it to the list. I felt it is endless to find words that start with "user" such as "userland" etc., so must draw a line somewhere. Link: http://lkml.kernel.org/r/1481573103-11329-4-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22lib/show_mem.c: teach show_mem to work with the given nodemaskMichal Hocko
show_mem() allows to filter out node specific data which is irrelevant to the allocation request via SHOW_MEM_FILTER_NODES. The filtering is done in skip_free_areas_node which skips all nodes which are not in the mems_allowed of the current process. This works most of the time as expected because the nodemask shouldn't be outside of the allocating task but there are some exceptions. E.g. memory hotplug might want to request allocations from outside of the allowed nodes (see new_node_page). Get rid of this hardcoded behavior and push the allocation mask down the show_mem path and use it instead of cpuset_current_mems_allowed. NULL nodemask is interpreted as cpuset_current_mems_allowed. [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/20170117091543.25850-5-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22Merge tag 'powerpc-4.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for direct mapped LPC on POWER9, giving Linux direct access to devices that may be on there such as a UART. - Memory hotplug support for the Power9 Radix MMU. - Add new AUX vectors describing the processor's cache geometry, to be used by glibc. - The ability for a guest to ask the hypervisor to resize the guest's hash table, and in addition support for doing so automatically when memory is hotplugged into/out-of the guest. This allows the hash table to be sized based on the current memory usage of the guest, rather than the maximum possible memory usage. - Implementation of optprobes (kprobe optimisation) for powerpc. In addition there's the topic branch shared with the KVM tree, which includes support for guests to use the Radix MMU on Power9. Thanks to: Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T, Anton Blanchard, Benjamin Herrenschmidt, Chris Packham, Daniel Axtens, Daniel Borkmann, David Gibson, Finn Thain, Gautham R. Shenoy, Gavin Shan, Greg Kurz, Joel Stanley, John Allen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Ravi Bangoria, Reza Arbab, Shailendra Singh, Vaibhav Jain, Wei Yongjun" * tag 'powerpc-4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (129 commits) powerpc/mm/radix: Skip ptesync in pte update helpers powerpc/mm/radix: Use ptep_get_and_clear_full when clearing pte for full mm powerpc/mm/radix: Update pte update sequence for pte clear case powerpc/mm: Update PROTFAULT handling in the page fault path powerpc/xmon: Fix data-breakpoint powerpc/mm: Fix build break with BOOK3S_64=n and MEMORY_HOTPLUG=y powerpc/mm: Fix build break when CMA=n && SPAPR_TCE_IOMMU=y powerpc/mm: Fix build break with RADIX=y & HUGETLBFS=n powerpc/pseries: Fix typo in parameter description powerpc/kprobes: Remove kprobe_exceptions_notify() kprobes: Introduce weak variant of kprobe_exceptions_notify() powerpc/ftrace: Fix confusing help text for DISABLE_MPROFILE_KERNEL powerpc/powernv: Fix opal_exit tracepoint opcode powerpc: Add a prototype for mcount() so it can be versioned powerpc: Drop GPL from of_node_to_nid() export to match other arches powerpc/kprobes: Optimize kprobe in kretprobe_trampoline() powerpc/kprobes: Implement Optprobes powerpc/kprobes: Fixes for kprobe_lookup_name() on BE powerpc: Add helper to check if offset is within relative branch range powerpc/bpf: Introduce __PPC_SH64() ...
2017-02-21powerpc/xmon: Dump memory in CPU endian formatDouglas Miller
Extend the dump command to allow display of 2, 4, and 8 byte words in CPU endian format. Also adds dump command for "1 byte values" for the sake of symmetry. New commands are: d1 dump 1 byte values d2 dump 2 byte values d4 dump 4 byte values d8 dump 8 byte values Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Douglas Miller <dougmill@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com>
2017-02-15powerpc/xmon: Enable disassembly files (compilation changes)Balbir Singh
After updating ppc-dis.c, ppc-opc.c and ppc.h the following changes were made to enable compilation and working of xmon: 1. Remove all disassembler_info 2. Use xmon's printf/print_address to output data and addresses respectively. 3. All bfd_* types and casts have been removed. 4. Optimizations related to opcd_indices have been removed. 5. The dialect is set based on cpu features. 6. PPC_OPCODE_CLASSIC is no longer supported in the new disassembler. 7. VLE opcode parsing and printing has been stripped. 8. Coding style conventions used for those routines has been retained and it does not match our CodingStyle. 9. The highest supported dialect is POWER9. 10. Defined ATTRIBUTE_UNUSED in ppc-dis.c. 11. Defined _(x) in ppc-dis.c. Finally, we remove the dependency on BROKEN so that XMON_DISASSEMBLY can be enabled again. Signed-off-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>