summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms
AgeCommit message (Collapse)Author
2009-08-20powerpc/pmac: Fix PowerSurge SMP IPI allocationBenjamin Herrenschmidt
The code for setting up the IPIs for SMP PowerSurge marchines bitrot, it needs to properly map the HW interrupt number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/cell: Replace strncpy by strlcpyroel kluin
Replace strncpy() and explicit null-termination by strlcpy() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc: Remove use of a second scratch SPRG in STAB codeBenjamin Herrenschmidt
The STAB code used on Power3 and RS/64 uses a second scratch SPRG to save a GPR in order to decide whether to go to do_stab_bolted_* or to handle a normal data access exception. This prevents our scheme of freeing SPRG3 which is user visible for user uses since we cannot use SPRG0 which, on RS/64, seems to be read-only for supervisor mode (like POWER4). This reworks the STAB exception entry to use the PACA as temporary storage instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc: Use names rather than numbers for SPRGs (v2)Benjamin Herrenschmidt
The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc: Rename exception.h to exception-64s.hBenjamin Herrenschmidt
The file include/asm/exception.h contains definitions that are specific to exception handling on 64-bit server type processors. This renames the file to exception-64s.h to reflect that fact and avoid confusion. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-20powerpc/amigaone: Convert amigaone_init() to a machine_device_initcall()Gerhard Pircher
This allows to remove the ppc_md.init() hook in the setup code. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-29powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boardsAnton Vorontsov
Linux isn't able to detect link changes on ethernet ports that were used by U-Boot. This is because U-Boot wrongly clears interrupt polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR, 0x1b) of Marvell PHYs. There is no easy way for PHY drivers to know IRQ line polarity (we could extract it from the device tree and pass it to phydevs, but that'll be quite a lot of work), so for now just reset the PHYs to their default states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-07-08powerpc: Don't use alloc_bootmem() in init_IRQ() pathAnton Vorontsov
This patch fixes various badnesses like this for all interrupt controllers: ------------[ cut here ]------------ Badness at c04db9dc [verbose debug info unavailable] NIP: c04db9dc LR: c04db9ac CTR: 00000000 REGS: c053de30 TRAP: 0700 Not tainted (2.6.31-rc1-00432-ge69b2b5-dirty) MSR: 00021000 <ME,CE> CR: 22020084 XER: 00000000 TASK = c0500480[0] 'swapper' THREAD: c053c000 GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000 GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000 GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4 GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050 NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74 LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74 Call Trace: [c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable) [c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108 [c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50 [c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0 [c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c [c053dfb0] [c04cf374] init_IRQ+0x28/0x3c p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix mpic alloc warning") missed some alloc_bootmem() instances, this is now fixed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/cell: Use pr_devel() in axon_msi.cMichael Ellerman
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7083 1616 0 8699 21fb arch/powerpc/../axon_msi.o size after: text data bss dec hex filename 5772 1208 0 6980 1b44 arch/powerpc/../axon_msi.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/pseries: Use pr_devel() in xics.cMichael Ellerman
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7720 5488 296 13504 34c0 platforms/pseries/xics.o size after: text data bss dec hex filename 7535 5456 296 13287 33e7 platforms/pseries/xics.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routinesMichael Ellerman
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. In particular, pSeries_lpar_hpte_insert() goes from 185 instructions to 77 instructions as a result of this patch. Luckily that code isn't called very often ... With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7284 1552 296 9132 23ac platforms/pseries/lpar.o size after: text data bss dec hex filename 5806 1096 296 7198 1c1e platforms/pseries/lpar.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-05powerpc/44x: Fix build error with -Werror for Warp platformJosh Boyer
With -Werror enabled during the build, the warp.c file fails to build due to the temp_isr function not containing a return statement. This fixes the build error and documents that the function never returns. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keepSean MacLennan
The GPIO LEDS driver now has a default state of "keep". Update the Warp DTS and platform file to take advantage of this new state. This removes the hardcoding of the two LEDs on the Warp. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-06-26Merge commit 'kumar/next' into mergeBenjamin Herrenschmidt
2009-06-26powerpc/pasemi: Use raw spinlock in SMP TB syncBenjamin Herrenschmidt
spin_lock() can hang if called while the timebase is frozen, so use a raw lock instead, also disable interrupts while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26powerpc: Use one common impl. of RTAS timebase sync and use raw spinlockBenjamin Herrenschmidt
Several platforms use their own copy of what is essentially the same code, using RTAS to synchronize the timebases when bringing up new CPUs. This moves it all into a single common implementation and additionally turns the spinlock into a raw spinlock since the former can rely on the timebase not being frozen when spinlock debugging is enabled, and finally masks interrupts while the timebase is disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMPBenjamin Herrenschmidt
The old PowerSurge SMP (ie, dual or quad 604 machines) code has numerous issues in modern world. One is cpu_possible_map is set too late (the device-tree is bogus) so we fail to allocate the interrupt stacks and crash. Another problem is the fact the timebase is frozen by the bringup of the second CPU so the delays in the generic code will hang, we need to move some of the calling procedure to inside the powermac code. This makes it boot again for me Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26powerpc/warp: Platform fix for i2c changeSean MacLennan
A change to the i2c subsystem breaks the warp platform code. The patch is cleaner anyway, the old way was a bit crufty. For those with keen eyes, the gratuitous change in the string from PIKA to Warp is just so the logs look a bit nicer. The following two lines tend to be printed one after another. Warp POST OK Warp DTM thread running. Yeah, this will be the third patch to warp.c submitted in this release.... Cheers, Sean The i2c_client struct changed, breaking the code that looked for the ad7414 chip. Use the new of_find_i2c_device_by_node function added in 2.6.29. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-23powerpc/85xx: remove duplicated #includeHuang Weiyi
Remove duplicated #include in arch/powerpc/platforms/85xx/xes_mpc85xx.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23powerpc/85xx: Fix issue found by lockdep trace in smp_85xx_kick_cpuKumar Gala
lockdep trace found the following: ------------[ cut here ]------------ Badness at c007baf0 [verbose debug info unavailable] NIP: c007baf0 LR: c007bad8 CTR: 00000000 REGS: ef855e00 TRAP: 0700 Tainted: G W (2.6.30-06736-g12a31df-dirty) MSR: 00021000 <ME,CE> CR: 24044022 XER: 20000000 TASK = ef858000[1] 'swapper' THREAD: ef854000 CPU: 0 GPR00: 00000000 ef855eb0 ef858000 00000001 000000d0 f1000000 ffbc8000 ffffffff GPR08: 000000d0 c0760000 c0710000 00000007 2fffffff 1004a388 7ffd9400 00000000 GPR16: 00000000 7ffcd100 7ffcd100 7ffcd100 c059cd78 c075c498 c057da7c ffffffff GPR24: ffbc8000 f1000000 00000001 c00bf8b0 c07595d4 000000d0 00021000 000000d0 NIP [c007baf0] lockdep_trace_alloc+0xc0/0xf0 LR [c007bad8] lockdep_trace_alloc+0xa8/0xf0 Call Trace: [ef855eb0] [c007ba60] lockdep_trace_alloc+0x30/0xf0 (unreliable) [ef855ec0] [c00cb3ac] kmem_cache_alloc+0x2c/0xf0 [ef855ee0] [c00bf8b0] __get_vm_area_node+0x80/0x1c0 [ef855f10] [c0017580] __ioremap_caller+0x1d0/0x1e0 [ef855f40] [c057da7c] smp_85xx_kick_cpu+0x64/0x124 [ef855f60] [c0599180] __cpu_up+0xd0/0x1a4 [ef855f80] [c05997c4] cpu_up+0x14c/0x1e0 [ef855fc0] [c05732a0] kernel_init+0x100/0x1c4 [ef855ff0] [c0011524] kernel_thread+0x4c/0x68 Instruction dump: 8009c174 2f800000 409e0048 73c08000 40820040 4818980d 2f830000 419effa0 3d20c076 8009c388 2f800000 409eff90 <0fe00000> 4bffff88 60000000 60000000 We were calling ioremap after we local_irq_restore(flags). A simple reorder fixes the problem. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23powerpc/85xx: Fix FSL RapidIO probing on MDS boardsRandy Vinson
FSL RapidIO won't probe without a proper compatible entry. This patch fixes the issue by adding fsl,rapidio-delta compatible to mpc85xx_ids. Signed-off-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-23powerpc/85xx: Stop using ppc_md.init on socratesKumar Gala
Match what other 85xx platforms do for of_platform_bus_probe and use machine_device_initcall. This is one small step in killing of ppc_md.init. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-22Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20Merge branch 'perfcounters-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits) perfcounter: Handle some IO return values perf_counter: Push perf_sample_data through the swcounter code perf_counter tools: Define and use our own u64, s64 etc. definitions perf_counter: Close race in perf_lock_task_context() perf_counter, x86: Improve interactions with fast-gup perf_counter: Simplify and fix task migration counting perf_counter tools: Add a data file header perf_counter: Update userspace callchain sampling uses perf_counter: Make callchain samples extensible perf report: Filter to parent set by default perf_counter tools: Handle lost events perf_counter: Add event overlow handling fs: Provide empty .set_page_dirty() aop for anon inodes perf_counter: tools: Makefile tweaks for 64-bit powerpc perf_counter: powerpc: Add processor back-end for MPC7450 family perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels perf_counter: powerpc: Change how processor-specific back-ends get selected perf_counter: powerpc: Use unsigned long for register and constraint values perf_counter: powerpc: Enable use of software counters on 32-bit powerpc perf_counter tools: Add and use isprint() ...
2009-06-19Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits) powerpc/5121: make clock debug output more readable powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback fbdev/xilinxfb: Fix improper casting and tighen up probe path usb/ps3: Add missing annotations powerpc: Add memory clobber to mtspr() powerpc: Fix invalid construct in our CPU selection Kconfig ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access powerpc: Add configurable -Werror for arch/powerpc of_serial: Add UPF_FIXED_TYPE flag drivers/hvc: Add missing __devexit_p() net/ps3: gelic - Add missing annotations powerpc: Introduce macro spin_event_timeout() powerpc/warp: Fix ISA_DMA_THRESHOLD default powerpc/bootwrapper: Custom build options for XPedite52xx targets powerpc/85xx: Add defconfig for X-ES MPC85xx boards powerpc/85xx: Add dts files for X-ES MPC85xx boards powerpc/85xx: Add platform support for X-ES MPC85xx boards 83xx: add support for the kmeter1 board. ...
2009-06-19powerpc/86xx: add MMC SPI support for MPC8610HPCD boardsAnton Vorontsov
This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for PIXIS' sdcsr bank that is used for managing SPI chip-select and for reading card's states. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18edac: cpc925 MC platform device setupHarry Ciao
Fix up the number of cells for the values of CPC925 Memory Controller, and setup related platform device during system booting up, against which CPC925 Memory Controller EDAC driver would be matched. Signed-off-by: Harry Ciao <qingtao.cao@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18perf_counter: powerpc: Add processor back-end for MPC7450 familyPaul Mackerras
This adds support for the performance monitor hardware on the MPC7450 family of processors (7450, 7451, 7455, 7447/7457, 7447A, 7448), used in the later Apple G4 powermacs/powerbooks and other machines. These machines have 6 hardware counters with a unique set of events which can be counted on each counter, with some events being available on multiple counters. Raw event codes for these processors are (PMC << 8) + PMCSEL. If PMC is non-zero then the event is that selected by the given PMCSEL value for that PMC (hardware counter). If PMC is zero then the event selected is one of the low-numbered ones that are common to several PMCs. In this case PMCSEL must be <= 22 and the event is what that PMCSEL value would select on PMC1 (but it may be placed any other PMC that has the same event for that PMCSEL value). For events that count cycles or occurrences that exceed a threshold, the threshold requested can be specified in the 0x3f000 bits of the raw event codes. If the event uses the threshold multiplier bit and that bit should be set, that is indicated with the 0x40000 bit of the raw event code. This fills in some of the generic cache events. Unfortunately there are quite a few blank spaces in the table, partly because these processors tend to count cache hits rather than cache accesses. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55631.802122.696927@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18perf_counter: powerpc: Enable use of software counters on 32-bit powerpcPaul Mackerras
This enables the perf_counter subsystem on 32-bit powerpc. Since we don't have any support for hardware counters on 32-bit powerpc yet, only software counters can be used. Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as 64-bit, the main thing this does is add an implementation of set_perf_counter_pending(). This needs to arrange for perf_counter_do_pending() to be called when interrupts are enabled. Rather than add code to local_irq_restore as 64-bit does, the 32-bit set_perf_counter_pending() generates an interrupt by setting the decrementer to 1 so that a decrementer interrupt will become pending in 1 or 2 timebase ticks (if a decrementer interrupt isn't already pending). When interrupts are enabled, timer_interrupt() will be called, and some new code in there calls perf_counter_do_pending(). We use a per-cpu array of flags to indicate whether we need to call perf_counter_do_pending() or not. This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT, which is selected by processor families for which we have hardware PMU support (currently only PPC64), and PPC_PERF_CTRS, which enables the powerpc-specific perf_counter back-end. Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-18Merge commit 'gcl/merge' into nextBenjamin Herrenschmidt
Manual merge of: drivers/net/fec_mpc52xx.c
2009-06-18Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-06-17powerpc/5121: make clock debug output more readableWolfram Sang
This patch refactors clock.c by replacing printk calls with pr_info/pr_cont, and uses '=' in output to connect key/value pairs Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-17powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() functionWolfgang Denk
So far, MPC512x used mpc512x_find_ips_freq() to get the bus frequency, while MPC52xx used mpc52xx_find_ipb_freq(). Despite the different clock names (IPS vs. IPB) the code was identical. Use common code for both processor families. Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-06-16Merge branch 'akpm'Linus Torvalds
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16fbdev: move logo externs to header fileGeert Uytterhoeven
Now we have __initconst, we can finally move the external declarations for the various Linux logo structures to <linux/linux_logo.h>. James' ack dates back to the previous submission (way to long ago), when the logos were still __initdata, which caused failures on some platforms with some toolchain versions. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: James Simmons <jsimmons@infradead.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16page allocator: do not check NUMA node ID when the caller knows the node is ↵Mel Gorman
valid Callers of alloc_pages_node() can optionally specify -1 as a node to mean "allocate from the current node". However, a number of the callers in fast paths know for a fact their node is valid. To avoid a comparison and branch, this patch adds alloc_pages_exact_node() that only checks the nid with VM_BUG_ON(). Callers that know their node is valid are then converted. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Paul Mundt <lethal@linux-sh.org> [for the SLOB NUMA bits] Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17Merge commit 'origin/master' into nextBenjamin Herrenschmidt
2009-06-16PCI AER: support Multiple Error Received and no error source idZhang, Yanmin
Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0. The patchset implements the support in kernel by searching the device tree under the root port. Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (38 commits) ps3flash: Always read chunks of 256 KiB, and cache them ps3flash: Cache the last accessed FLASH chunk ps3: Replace direct file operations by callback ps3: Switch ps3_os_area_[gs]et_rtc_diff to EXPORT_SYMBOL_GPL() ps3: Correct debug message in dma_ioc0_map_pages() drivers/ps3: Add missing annotations ps3fb: Use ps3_system_bus_[gs]et_drvdata() instead of direct access ps3flash: Use ps3_system_bus_[gs]et_drvdata() instead of direct access ps3: shorten ps3_system_bus_[gs]et_driver_data to ps3_system_bus_[gs]et_drvdata ps3: Use dev_[gs]et_drvdata() instead of direct access for system bus devices block/ps3: remove driver_data direct access of struct device ps3vram: Make ps3vram_priv.reports a void * ps3vram: Remove no longer used ps3vram_priv.ddr_base ps3vram: Replace mutex by spinlock + bio_list block: Add bio_list_peek() powerpc: Use generic atomic64_t implementation on 32-bit processors lib: Provide generic atomic64_t implementation powerpc: Add compiler memory barrier to mtmsr macro powerpc/iseries: Mark signal_vsp_instruction() as maybe unused powerpc/iseries: Fix unused function warning in iSeries DT code ...
2009-06-16powerpc: Fix invalid construct in our CPU selection KconfigBenjamin Herrenschmidt
commit 5b7c3c918c9c26c50d220b2b50359208cb5a1dbe introduced an invalid construct in our CPU selection. This caused warnings, though it still appeared to do the right thing. This fixes it properly by having separate formal definitions of PPC_BOOK3S_32 and PPC_BOOK3S_64 and one statement defining PPC_BOOK3S based on the two above. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16powerpc: Add configurable -Werror for arch/powerpcMichael Ellerman
Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-16powerpc/warp: Fix ISA_DMA_THRESHOLD defaultSean MacLennan
If no device is passed to __dma_alloc_coherent, it defaults to using ISA_DMA_THRESHOLD for the mask. This patch provides a reasonable default rather than 0. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-15powerpc/85xx: Add platform support for X-ES MPC85xx boardsNate Case
Add support for X-ES single-board computers based on the Freescale MPC85xx processors. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-1583xx: add support for the kmeter1 board.Heiko Schocher
The following series implements basic board support for the kmeter1 board from keymile, based on a MPC8360. This series provides the following functionality: - The board can boot with a serial console on UART1 - Ethernet: UCC1 in RGMII mode UCC2 in RGMII mode UCC4 in RMII mode UCC5 in RMII mode UCC6 in RMII mode UCC7 in RMII mode UCC8 in RMII mode following patch is necessary for working UCC in RMII mode: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html - Flash accessed via MTD layer On this hardware there is an Intel P30 flash, following patch series is necessary for working with this hardware: http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html - I2C using I2C Bus 1 from the MPC8360 cpu Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15powerpc/mpc83xx: Fix usb mux setup for mpc834xPeter Korsgaard
usb0 and usb1 mux settings in the sicrl register were swapped (twice!) in mpc834x_usb_cfg(), leading to various strange issues with fsl-ehci and full speed devices. The USB port config on mpc834x is done using 2 muxes: Port 0 is always used for MPH port 0, and port 1 can either be used for MPH port 1 or DR (unless DR uses UTMI phy or OTG, then it uses both ports) - See 8349 RM figure 1-4.. mpc8349_usb_cfg() had this inverted for the DR, and it also had the bit positions of the usb0 / usb1 mux settings swapped. It would basically work if you specified port1 instead of port0 for the MPH controller (and happened to use ULPI phys), which is what all the 834x dts have done, even though that configuration is physically invalid. Instead fix mpc8349_usb_cfg() and adjust the dts files to match reality. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15powerpc/85xx: Add SWIOTLB support to FSL boardsKumar Gala
Add the platform-specific code for enabling SWIOTLB if needed on P2020DS, MPC85xx DS, and MPC85xx MDS boards as they are capable of having >4G of memory. We determine if we need to enable swiotlb based on how much memory is in the board and if it exceeds 4G or what we can map via PCI inbound windows. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15powerpc: Add 86xx support for SWIOTLBBecky Bruce
This is the final bit of code to allow enabling swiotlb on mpc86xx. The platform-specific code is very small and consists of enabling SWIOTLB in the config file, registering the swiotlb_setup_bus_notifier initcall, and setting pci_dma_ops to point to swiotlb_pci_dma_ops if we have more memory than can be mapped by the inbound PCI windows. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1244 commits) pkt_sched: Rename PSCHED_US2NS and PSCHED_NS2US ipv4: Fix fib_trie rebalancing Bluetooth: Fix issue with uninitialized nsh.type in DTL-1 driver Bluetooth: Fix Kconfig issue with RFKILL integration PIM-SM: namespace changes ipv4: update ARPD help text net: use a deferred timer in rt_check_expire ieee802154: fix kconfig bool/tristate muckup bonding: initialization rework bonding: use is_zero_ether_addr bonding: network device names are case sensative bonding: elminate bad refcount code bonding: fix style issues bonding: fix destructor bonding: remove bonding read/write semaphore bonding: initialize before registration bonding: bond_create always called with default parameters x_tables: Convert printk to pr_err netfilter: conntrack: optional reliable conntrack event delivery list_nulls: add hlist_nulls_add_head and hlist_nulls_del ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 21:34:31 +0000