summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powernv/pci-ioda.c
AgeCommit message (Collapse)Author
2017-08-08powerpc/powernv: Enable PCI peer-to-peerFrederic Barrat
P9 has support for PCI peer-to-peer, enabling a device to write in the MMIO space of another device directly, without interrupting the CPU. This patch adds support for it on powernv, by adding a new API to be called by drivers. The pnv_pci_set_p2p(...) call configures an 'initiator', i.e the device which will issue the MMIO operation, and a 'target', i.e. the device on the receiving side. P9 really only supports MMIO stores for the time being but that's expected to change in the future, so the API allows to define both load and store operations. /* PCI p2p descriptor */ #define OPAL_PCI_P2P_ENABLE 0x1 #define OPAL_PCI_P2P_LOAD 0x2 #define OPAL_PCI_P2P_STORE 0x4 int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc) It uses a new OPAL call, as the configuration magic is done on the PHBs by skiboot. Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Russell Currey <ruscur@russell.cc> [mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-27powerpc/powernv/pci: Enable 64-bit devices to access >4GB DMA spaceRussell Currey
On PHB3/POWER8 systems, devices can select between two different sections of address space, TVE#0 and TVE#1. TVE#0 is intended for 32bit devices that aren't capable of addressing more than 4GB. Selecting TVE#1 instead, with the capability of addressing over 4GB, is performed by setting bit 59 of a PCI address. However, some devices aren't capable of addressing at least 59 bits, but still want more than 4GB of DMA space. In order to enable this, reconfigure TVE#0 to be suitable for 64-bit devices by allocating memory past the initial 4GB that is inaccessible by 64-bit DMAs. This bypass mode is only enabled if a device requests 4GB or more of DMA address space, if the system has PHB3 (POWER8 systems), and if the device does not share a PE with any devices from different vendors. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-27powerpc/powernv/pci: Add helper to check if a PE has a single vendorRussell Currey
Add a helper that determines if all the devices contained in a given PE are all from the same vendor or not. This can be useful in determining if it's okay to make PE-wide changes that may be suitable for some devices but not for others. This is used later in the series. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-06-27powerpc/powernv/pci: Dynamically allocate PHB diag dataRussell Currey
Diagnostic data for PHBs currently works by allocated a fixed-sized buffer. This is simple, but either wastes memory (though only a few kilobytes) or in the case of PHB4 isn't enough to fit the whole data blob. For machines that don't describe the diagnostic data size in the device tree, use the hardcoded buffer size as before. For those that do, only allocate exactly what's needed. In the special case of P7IOC (which has two types of diag data), the larger should be specified in the device tree. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-05-03powerpc/powernv: Fix TCE kill on NVLink2Alistair Popple
Commit 616badd2fb49 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2") forced all TCE kills to go via the OPAL call for NVLink2. However the PHB3 implementation of TCE kill was still being called directly from some functions which in some circumstances caused a machine check. This patch adds an equivalent IODA2 version of the function which uses the correct invalidation method depending on PHB model and changes all external callers to use it instead. Fixes: 616badd2fb49 ("powerpc/powernv: Use OPAL call for TCE kill on NVLink2") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc/powernv: Fix iommu table size calculation hook for small tablesAlexey Kardashevskiy
When the userspace requests a small TCE table (which takes less than the system page size) and more than 1 TCE level, the existing code returns a single page size which is a bug as each additional TCE level requires at least one page and this is what pnv_pci_ioda2_table_alloc_pages() does. And we end up seeing WARN_ON(!ret && ((*ptbl)->it_allocated_size != table_size)) in drivers/vfio/vfio_iommu_spapr_tce.c. This replaces incorrect _ALIGN_UP() (which aligns zero up to zero) with max_t() to fix the bug. Besides removing WARN_ON(), there should be no other changes in behaviour. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28powerpc/powernv: Check kzalloc() return value in pnv_pci_table_allocAlexey Kardashevskiy
pnv_pci_table_alloc() ignores possible failure from kzalloc_node(), this adds a check. There are 2 callers of pnv_pci_table_alloc(), one already checks for tbl!=NULL, this adds WARN_ON() to the other path which only happens during boot time in IODA1 and not expected to fail. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-28Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge the topic branch we were sharing with kvm-ppc, Paul has also merged it.
2017-04-19powerpc/powernv: Override pcibios_default_alignment() to force PCI devices ↵Yongji Xie
to be page aligned Override pcibios_default_alignment() to set default alignment to PAGE_SIZE for all PCI devices on PowerNV platform. Thus sub-page BARs would not share a page and could be mapped into guest when VFIO passthrough them. Signed-off-by: Yongji Xie <elohimes@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-11powerpc: Create asm/debugfs.h and move powerpc_debugfs_root thereMichael Ellerman
powerpc_debugfs_root is the dentry representing the root of the "powerpc" directory tree in debugfs. Currently it sits in asm/debug.h, a long with some other things that have "debug" in the name, but are otherwise unrelated. Pull it out into a separate header, which also includes linux/debugfs.h, and convert all the users to include debugfs.h instead of debug.h. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-04powerpc/powernv: Introduce address translation services for Nvlink2Alistair Popple
Nvlink2 supports address translation services (ATS) allowing devices to request address translations from an mmu known as the nest MMU which is setup to walk the CPU page tables. To access this functionality certain firmware calls are required to setup and manage hardware context tables in the nvlink processing unit (NPU). The NPU also manages forwarding of TLB invalidates (known as address translation shootdowns/ATSDs) to attached devices. This patch exports several methods to allow device drivers to register a process id (PASID/PID) in the hardware tables and to receive notification of when a device should stop issuing address translation requests (ATRs). It also adds a fault handler to allow device drivers to demand fault pages in. Signed-off-by: Alistair Popple <alistair@popple.id.au> [mpe: Fix up comment formatting, use flush_tlb_mm()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-30powerpc/vfio_spapr_tce: Add reference counting to iommu_tableAlexey Kardashevskiy
So far iommu_table obejcts were only used in virtual mode and had a single owner. We are going to change this by implementing in-kernel acceleration of DMA mapping requests. The proposed acceleration will handle requests in real mode and KVM will keep references to tables. This adds a kref to iommu_table and defines new helpers to update it. This replaces iommu_free_table() with iommu_tce_table_put() and makes iommu_free_table() static. iommu_tce_table_get() is not used in this patch but it will be in the following patch. Since this touches prototypes, this also removes @node_name parameter as it has never been really useful on powernv and carrying it for the pseries platform code to iommu_free_table() seems to be quite useless as well. This should cause no behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-30powerpc/iommu/vfio_spapr_tce: Cleanup iommu_table disposalAlexey Kardashevskiy
At the moment iommu_table can be disposed by either calling iommu_table_free() directly or it_ops::free(); the only implementation of free() is in IODA2 - pnv_ioda2_table_free() - and it calls iommu_table_free() anyway. As we are going to have reference counting on tables, we need an unified way of disposing tables. This moves it_ops::free() call into iommu_free_table() and makes use of the latter. The free() callback now handles only platform-specific data. As from now on the iommu_free_table() calls it_ops->free(), we need to have it_ops initialized before calling iommu_free_table() so this moves this initialization in pnv_pci_ioda2_create_table(). This should cause no behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-30powerpc/powernv/iommu: Add real mode version of iommu_table_ops::exchange()Alexey Kardashevskiy
In real mode, TCE tables are invalidated using special cache-inhibited store instructions which are not available in virtual mode This defines and implements exchange_rm() callback. This does not define set_rm/clear_rm/flush_rm callbacks as there is no user for those - exchange/exchange_rm are only to be used by KVM for VFIO. The exchange_rm callback is defined for IODA1/IODA2 powernv platforms. This replaces list_for_each_entry_rcu with its lockless version as from now on pnv_pci_ioda2_tce_invalidate() can be called in the real mode too. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-20powerpc/powernv/npu: Remove dead iommu codeAlexey Kardashevskiy
PNV_IODA_PE_DEV is only used for NPU devices (emulated PCI bridges representing NVLink). These are added to IOMMU groups with corresponding NVIDIA devices after all non-NPU PEs are setup; a special helper - pnv_pci_ioda_setup_iommu_api() - handles this in pnv_pci_ioda_fixup(). The pnv_pci_ioda2_setup_dma_pe() helper sets up DMA for a PE. It is called for VFs (so it does not handle NPU case) and PCI bridges but only IODA1 and IODA2 types. An NPU bridge has its own type id (PNV_PHB_NPU) so pnv_pci_ioda2_setup_dma_pe() cannot be called on NPU and therefore (pe->flags & PNV_IODA_PE_DEV) is always "false". This removes not used iommu_add_device(). This should not cause any behavioral change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-09powerpc/powernv/ioda2: Update iommu table base on ownership changeAlexey Kardashevskiy
On POWERNV platform, in order to do DMA via IOMMU (i.e. 32bit DMA in our case), a device needs an iommu_table pointer set via set_iommu_table_base(). The codeflow is: - pnv_pci_ioda2_setup_dma_pe() - pnv_pci_ioda2_setup_default_config() - pnv_ioda_setup_bus_dma() [1] pnv_pci_ioda2_setup_dma_pe() creates IOMMU groups, pnv_pci_ioda2_setup_default_config() does default DMA setup, pnv_ioda_setup_bus_dma() takes a bus PE (on IODA2, all physical function PEs as bus PEs except NPU), walks through all underlying buses and devices, adds all devices to an IOMMU group and sets iommu_table. On IODA2, when VFIO is used, it takes ownership over a PE which means it removes all tables and creates new ones (with a possibility of sharing them among PEs). So when the ownership is returned from VFIO to the kernel, the iommu_table pointer written to a device at [1] is stale and needs an update. This adds an "add_to_group" parameter to pnv_ioda_setup_bus_dma() (in fact re-adds as it used to be there a while ago for different reasons) to tell the helper if a device needs to be added to an IOMMU group with an iommu_table update or just the latter. This calls pnv_ioda_setup_bus_dma(..., false) from pnv_ioda2_release_ownership() so when the ownership is restored, 32bit DMA can work again for a device. This does the same thing on obtaining ownership as the iommu_table point is stale at this point anyway and it is safer to have NULL there. We did not hit this earlier as all tested devices in recent years were only using 64bit DMA; the rare exception for this is MPT3 SAS adapter which uses both 32bit and 64bit DMA access and it has not been tested with VFIO much. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-09powerpc/powernv/ioda2: Gracefully fail if too many TCE levels requestedAlexey Kardashevskiy
The IODA2 specification says that a 64 DMA address cannot use top 4 bits (3 are reserved and one is a "TVE select"); bottom page_shift bits cannot be used for multilevel table addressing either. The existing IODA2 table allocation code aligns the minimum TCE table size to PAGE_SIZE so in the case of 64K system pages and 4K IOMMU pages, we have 64-4-12=48 bits. Since 64K page stores 8192 TCEs, i.e. needs 13 bits, the maximum number of levels is 48/13 = 3 so we physically cannot address more and EEH happens on DMA accesses. This adds a check that too many levels were requested. It is still possible to have 5 levels in the case of 4K system page size. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-01Merge tag 'powerpc-4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Highlights include: - an update of the disassembly code used by xmon to the latest versions in binutils. We've received permission from all the authors of the relevant binutils changes to relicense their changes to the relevant files from GPLv3 to GPLv2, for inclusion in Linux. Thanks to Peter Bergner for doing the leg work to get permission from everyone. - addition of the "architected" Power9 CPU table entry, allowing us to boot in Power9 architected mode under a hypervisor. - updates to the Power9 PMU code. - implementation of clear_bit_unlock_is_negative_byte() to optimise unlock_page(). - Freescale updates from Scott: "Highlights include 8xx breakpoints and perf, t1042rdb display support, and board updates." Thanks to: Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Balbir Singh, Douglas Miller, Frédéric Weisbecker, Gavin Shan, Madhavan Srinivasan, Michael Roth, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Peter Bergner, Paul E. McKenney, Rashmica Gupta, Russell Currey, Sahil Mehta, Stewart Smith" * tag 'powerpc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits) powerpc: Remove leftover cputime_to_nsecs call causing build error powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU powerpc/optprobes: Fix TOC handling in optprobes trampoline powerpc/pseries: Advertise Hot Plug Event support to firmware cxl: fix nested locking hang during EEH hotplug powerpc/xmon: Dump memory in CPU endian format powerpc/pseries: Revert 'Auto-online hotplugged memory' powerpc/powernv: Make PCI non-optional powerpc/64: Implement clear_bit_unlock_is_negative_byte() powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable() powerpc/kernel: Remove error message in pcibios_setup_phb_resources() powerpc/mm: Fix typo in set_pte_at() pci/hotplug/pnv-php: Disable MSI and PCI device properly pci/hotplug/pnv-php: Disable surprise hotplug capability on conflicts pci/hotplug/pnv-php: Remove WARN_ON() in pnv_php_put_slot() powerpc: Add POWER9 architected mode to cputable powerpc/perf: use is_kernel_addr macro in perf_get_misc_flags() powerpc/perf: Avoid FAB_*_MATCH checks for power9 powerpc/perf: Add restrictions to PMC5 in power9 DD1 powerpc/perf: Use Instruction Counter value ...
2017-02-27scripts/spelling.txt: add "overrided" pattern and fix typo instancesMasahiro Yamada
Fix typos and add the following to the scripts/spelling.txt: overrided||overridden Link: http://lkml.kernel.org/r/1481573103-11329-22-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-17powerpc/powernv: Remove unused variable in pnv_pci_sriov_disable()Gavin Shan
The local variable @iov isn't used, to remove it. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-14Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge the topic branch we're sharing with the kvm-ppc tree.
2017-02-07powerpc/powernv: Remove separate entry for OPAL real mode callsBenjamin Herrenschmidt
All entry points already read the MSR so they can easily do the right thing. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-30powerpc/powernv: Use OPAL call for TCE kill on NVLink2Alistair Popple
Add detection of NPU2 PHBs. NPU2/NVLink2 has a different register layout for the TCE kill register therefore TCE invalidation should be done via the OPAL call rather than using the register directly as it is for PHB3 and NVLink1. This changes TCE invalidation to use the OPAL call in the case of a NPU2 PHB model. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25powerpc/powernv/pci: Use kmalloc_array() in two functionsMarkus Elfring
Use kmalloc_array(), which checks for overflow of the multiplication, rather than doing it by hand. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22powerpc/pci: Always print PHB and PE numbers as hexadecimalRussell Currey
PHB, PE (and by association MVE) numbers are printed as a mix of decimal and hexadecimal throughout the kernel. This can be misleading, so make them all hexadecimal. Standardising on hex instead of dec because: - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc) - PE numbers are presented as hex in sysfs and parsed in hex in debugfs The only place I think this could cause confusing are the messages during boot, i.e. pci 000a:01 : [PE# 000] Secondary bus 1 associated with PE#0 which can be a quick way to check PE numbers. pe_level_printk() will only print two characters instead of three, so the above would be pci 000a:01 : [PE# 00] Secondary bus 1 associated with PE#0 which gives a hint it's in hex. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22powerpc/powernv: Don't warn on PE init if unfreeze is unsupportedRussell Currey
Whenever a PE is initialised in powernv, opal_pci_eeh_freeze_clear() is called. This is to remove any existing freeze, and has no negative side effects if the PE is already in an unfrozen state. On PHB backends that don't support this operation and return OPAL_UNSUPPORTED, this creates a scary and misleading warning message. Skip the warning message on init if OPAL_UNSUPPORTED is returned. As far as I'm aware, this currently only affects NPUs. Fixes: 313483d ("powerpc/powernv: Unfreeze PE on allocation") Signed-off-by: Russell Currey <ruscur@russell.cc> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-07Merge tag 'powerpc-4.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin) - Use gas sections for arranging exception vectors et. al. - Large set of TM cleanups and selftests (Cyril Bur) - Enable transactional memory (TM) lazily for userspace (Cyril Bur) - Support for XZ compression in the zImage wrapper (Oliver O'Halloran) - Add support for bpf constant blinding (Naveen N. Rao) - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens) Fixes: - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman) - xmon: Don't use ld on 32-bit (Michael Ellerman) - vdso64: Use double word compare on pointers (Anton Blanchard) - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui) - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy) - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V) - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan) - Replay hypervisor maintenance interrupt first (Nicholas Piggin) Various performance optimisations (Anton Blanchard): - Align hot loops of memset() and backwards_memcpy() - During context switch, check before setting mm_cpumask - Remove static branch prediction in atomic{, 64}_add_unless - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian - Set default CPU type to POWER8 for little endian builds Cleanups & features: - Sparse fixes/cleanups (Daniel Axtens) - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras) - Radix MMU fixups for POWER9 (Aneesh Kumar K.V) - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo) - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin) - Optimise MSR handling in exception handling (Nicholas Piggin) - Support for kexec with Radix MMU (Benjamin Herrenschmidt) - powernv EEH fixes (Russell Currey) - Suprise PCI hotplug support for powernv (Gavin Shan) - Endian/sparse fixes for powernv PCI (Gavin Shan) - Defconfig updates (Anton Blanchard) - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh) - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat) - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan) - Fix HV facility unavailable to use correct handler (Nicholas Piggin) - Remove unnecessary syscall trampoline (Nicholas Piggin) - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman) - Quieten EEH message when no adapters are found (Anton Blanchard) - powernv: Add PHB register dump debugfs handle (Russell Currey) - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin) - Document the syscall ABI (Nicholas Piggin) - MAINTAINERS: Update cxl maintainers (Michael Neuling) - powerpc: Remove all usages of NO_IRQ (Michael Ellerman) Minor cleanups: - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo" * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/bpf: Add support for bpf constant blinding powerpc/bpf: Implement support for tail calls powerpc/bpf: Introduce accessors for using the tmp local stack space powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n powerpc: tm: Enable transactional memory (TM) lazily for userspace powerpc/tm: Add TM Unavailable Exception powerpc: Remove do_load_up_transact_{fpu,altivec} powerpc: tm: Rename transct_(*) to ck(\1)_state powerpc: tm: Always use fp_state and vr_state to store live registers selftests/powerpc: Add checks for transactional VSXs in signal contexts selftests/powerpc: Add checks for transactional VMXs in signal contexts selftests/powerpc: Add checks for transactional FPUs in signal contexts selftests/powerpc: Add checks for transactional GPRs in signal contexts selftests/powerpc: Check that signals always get delivered selftests/powerpc: Add TM tcheck helpers in C selftests/powerpc: Allow tests to extend their kill timeout selftests/powerpc: Introduce GPR asm helper header file selftests/powerpc: Move VMX stack frame macros to header file selftests/powerpc: Rework FPU stack placement macros and move to header file selftests/powerpc: Check for VSX preservation across userspace preemption ...
2016-10-06Merge tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Radim Krčmář: "All architectures: - move `make kvmconfig` stubs from x86 - use 64 bits for debugfs stats ARM: - Important fixes for not using an in-kernel irqchip - handle SError exceptions and present them to guests if appropriate - proxying of GICV access at EL2 if guest mappings are unsafe - GICv3 on AArch32 on ARMv8 - preparations for GICv3 save/restore, including ABI docs - cleanups and a bit of optimizations MIPS: - A couple of fixes in preparation for supporting MIPS EVA host kernels - MIPS SMP host & TLB invalidation fixes PPC: - Fix the bug which caused guests to falsely report lockups - other minor fixes - a small optimization s390: - Lazy enablement of runtime instrumentation - up to 255 CPUs for nested guests - rework of machine check deliver - cleanups and fixes x86: - IOMMU part of AMD's AVIC for vmexit-less interrupt delivery - Hyper-V TSC page - per-vcpu tsc_offset in debugfs - accelerated INS/OUTS in nVMX - cleanups and fixes" * tag 'kvm-4.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (140 commits) KVM: MIPS: Drop dubious EntryHi optimisation KVM: MIPS: Invalidate TLB by regenerating ASIDs KVM: MIPS: Split kernel/user ASID regeneration KVM: MIPS: Drop other CPU ASIDs on guest MMU changes KVM: arm/arm64: vgic: Don't flush/sync without a working vgic KVM: arm64: Require in-kernel irqchip for PMU support KVM: PPC: Book3s PR: Allow access to unprivileged MMCR2 register KVM: PPC: Book3S PR: Support 64kB page size on POWER8E and POWER8NVL KVM: PPC: Book3S: Remove duplicate setting of the B field in tlbie KVM: PPC: BookE: Fix a sanity check KVM: PPC: Book3S HV: Take out virtual core piggybacking code KVM: PPC: Book3S: Treat VTB as a per-subcore register, not per-thread ARM: gic-v3: Work around definition of gic_write_bpr1 KVM: nVMX: Fix the NMI IDT-vectoring handling KVM: VMX: Enable MSR-BASED TPR shadow even if APICv is inactive KVM: nVMX: Fix reload apic access page warning kvmconfig: add virtio-gpu to config fragment config: move x86 kvm_guest.config to a common location arm64: KVM: Remove duplicating init code for setting VMID ARM: KVM: Support vgic-v3 ...
2016-10-04powerpc/powernv: Fix data type for @r in pnv_ioda_parse_m64_window()Gavin Shan
This fixes warning reported from sparse: pci-ioda.c:451:49: warning: incorrect type in argument 2 (different base types) Fixes: 262af557dd75 ("powerpc/powernv: Enable M64 aperatus for PHB3") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29powerpc/powernv: Unfreeze PE on allocationGavin Shan
This unfreezes PE when it's initialized because the PE might be put into frozen state in the last hot remove path. It's not harmful to do so if the PE is already in unfrozen state. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-23powerpc/powernv: Fix comment style and spellingAndrew Donnellan
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-23powerpc/powernv/pci: Add PHB register dump debugfs handleRussell Currey
On EEH events the kernel will print a dump of relevant registers. If EEH is unavailable (i.e. CONFIG_EEH is disabled, a new platform doesn't have EEH support, etc) this information isn't readily available. Add a new debugfs handler to trigger a PHB register dump, so that this information can be made available on demand. Signed-off-by: Russell Currey <ruscur@russell.cc> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-21powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignmentRussell Currey
Commit 5958d19a143e checks for prefetchable m64 BARs by comparing the addresses instead of using resource flags. This broke SR-IOV as the m64 check in pnv_pci_ioda_fixup_iov_resources() fails. The condition in pnv_pci_window_alignment() also changed to checking only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and IORESOURCE_PREFETCH. Revert these cases to the previous behaviour, adding a new helper function to do so. This is named pnv_pci_is_m64_flags() to make it clear this function is only looking at resource flags and should not be relied on for non-SRIOV resources. Fixes: 5958d19a143e ("Fix incorrect PE reservation attempt on some 64-bit BARs") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Russell Currey <ruscur@russell.cc> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-15powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPALMichael Ellerman
In commit f0228c413011 ("powerpc/powernv/pci: Fallback to OPAL for TCE invalidations"), we added logic to fallback to OPAL for doing TCE invalidations if we can't do it in Linux. Ben sent a v2 of the patch, containing these additional call sites, but I had already applied v1 and didn't notice. So fix them now. Fixes: f0228c413011 ("powerpc/powernv/pci: Fallback to OPAL for TCE invalidations") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-15powerpc/powernv: Detach from PE on releasing PCI deviceGavin Shan
The PCI hotplug can be part of EEH error recovery. The @pdn and the device's PE number aren't removed and added afterwords. The PE number in @pdn should be set to an invalid one. Otherwise, the PE's device count is decreased on removing devices while failing to be increased on adding devices. It leads to unbalanced PE's device count and make normal PCI hotplug path broken. Fixes: c5f7700bbd2e ("powerpc/powernv: Dynamically release PE") Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-14powerpc/powernv: Fix the state of root PEGavin Shan
The PE for root bus (root PE) can be removed because of PCI hot remove in EEH recovery path for fenced PHB error. We need update @phb->root_pe_populated accordingly so that the root PE can be populated again in forthcoming PCI hot add path. Also, the PE shouldn't be destroyed as it's global and reserved resource. Fixes: c5f7700bbd2e ("powerpc/powernv: Dynamically release PE") Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-09powerpc/powernv: Provide facilities for EOI, usable from real modeSuresh Warrier
This adds a new function pnv_opal_pci_msi_eoi() which does the part of end-of-interrupt (EOI) handling of an MSI which involves doing an OPAL call. This function can be called in real mode. This doesn't just export pnv_ioda2_msi_eoi() because that does a call to icp_native_eoi(), which does not work in real mode. This also adds a function, is_pnv_opal_msi(), which KVM can call to check whether an interrupt is one for which we should be calling pnv_opal_pci_msi_eoi() when we need to do an EOI. [paulus@ozlabs.org - split out the addition of pnv_opal_pci_msi_eoi() from Suresh's patch "KVM: PPC: Book3S HV: Handle passthrough interrupts in guest"; added is_pnv_opal_msi(); wrote description.] Signed-off-by: Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2016-09-08powerpc/powernv: Fix corrupted PE allocation bitmap on releasing PEGavin Shan
In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e9167726c41 ("powerpc/powernv: Use PE instead of number during setup and release" Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-06powerpc/powernv: Fix crash on releasing compound PEGavin Shan
The compound PE is created to accommodate the devices attached to one specific PCI bus that consume multiple M64 segments. The compound PE is made up of one master PE and possibly multiple slave PEs. The slave PEs should be destroyed when releasing the master PE. A kernel crash happens when derferencing @pe->pdev on releasing the slave PE in pnv_ioda_deconfigure_pe(). # echo 0 > /sys/bus/pci/slots/C7/power iommu: Removing device 0000:01:00.1 from group 0 iommu: Removing device 0000:01:00.0 from group 0 Unable to handle kernel paging request for data at address 0x00000010 Faulting instruction address: 0xc00000000005d898 cpu 0x1: Vector: 300 (Data Access) at [c000000fe8217620] pc: c00000000005d898: pnv_ioda_release_pe+0x288/0x610 lr: c00000000005dbdc: pnv_ioda_release_pe+0x5cc/0x610 sp: c000000fe82178a0 msr: 9000000000009033 dar: 10 dsisr: 40000000 current = 0xc000000fe815ab80 paca = 0xc00000000ff00400 softe: 0 irq_happened: 0x01 pid = 2709, comm = sh Linux version 4.8.0-rc5-gavin-00006-g745efdb (gwshan@gwshan) \ (gcc version 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #586 SMP \ Tue Sep 6 13:37:29 AEST 2016 enter ? for help [c000000fe8217940] c00000000005d684 pnv_ioda_release_pe+0x74/0x610 [c000000fe82179e0] c000000000034460 pcibios_release_device+0x50/0x70 [c000000fe8217a10] c0000000004aba80 pci_release_dev+0x50/0xa0 [c000000fe8217a40] c000000000704898 device_release+0x58/0xf0 [c000000fe8217ac0] c000000000470510 kobject_release+0x80/0xf0 [c000000fe8217b00] c000000000704dd4 put_device+0x24/0x40 [c000000fe8217b20] c0000000004af94c pci_remove_bus_device+0x12c/0x150 [c000000fe8217b60] c000000000034244 pci_hp_remove_devices+0x94/0xd0 [c000000fe8217ba0] c0000000004ca444 pnv_php_disable_slot+0x64/0xb0 [c000000fe8217bd0] c0000000004c88c0 power_write_file+0xa0/0x190 [c000000fe8217c50] c0000000004c248c pci_slot_attr_store+0x3c/0x60 [c000000fe8217c70] c0000000002d6494 sysfs_kf_write+0x94/0xc0 [c000000fe8217cb0] c0000000002d50f0 kernfs_fop_write+0x180/0x260 [c000000fe8217d00] c0000000002334a0 __vfs_write+0x40/0x190 [c000000fe8217d90] c000000000234738 vfs_write+0xc8/0x240 [c000000fe8217de0] c000000000236250 SyS_write+0x60/0x110 [c000000fe8217e30] c000000000009524 system_call+0x38/0x108 It fixes the kernel crash by bypassing releasing resources (DMA, IO and memory segments, PELTM) because there are no resources assigned to the slave PE. Fixes: c5f7700bbd2e ("powerpc/powernv: Dynamically release PE") Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-22powerpc/powernv/pci: fix iterator signednessAndrzej Hajda
Unsigned type is always non-negative, so the loop could not end in case condition is never true. The problem has been detected using semantic patch scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2016-08-09powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARsBenjamin Herrenschmidt
The generic allocation code may sometimes decide to assign a prefetchable 64-bit BAR to the M32 window. In fact it may also decide to allocate a 64-bit non-prefetchable BAR to the M64 one ! So using the resource flags as a test to decide which window was used for PE allocation is just wrong and leads to insane PE numbers. Instead, compare the addresses to figure it out. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rename the function as agreed by Ben & Gavin] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-09powerpc/powernv/ioda: Fix TCE invalidate to work in real mode againAlexey Kardashevskiy
Commit fd141d1a99a3 ("powerpc/powernv/pci: Rework accessing the TCE invalidate register") broke TCE invalidation on IODA2/PHB3 for real mode. This makes invalidate work again. Fixes: fd141d1a99a3 ("powerpc/powernv/pci: Rework accessing the TCE invalidate register") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-17powerpc/powernv/pci: Check status of a PHB before using itBenjamin Herrenschmidt
If the firmware encounters an error (internal or HW) during initialization of a PHB, it might leave the device-node in the tree but mark it disabled using the "status" property. We should check it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-17powerpc/powernv/pci: Use the device-tree to get available range of M64'sBenjamin Herrenschmidt
M64's are the configurable 64-bit windows that cover the 64-bit MMIO space. We used to hard code 16 windows. Newer chips might have a variable number and might need to reserve some as well (for example on PHB4/POWER9, M32 and M64 are actually unified and we use M64#0 to map the 32-bit space). So newer OPALs will provide a property we can use to know what range of windows is available. The property is named so that it can eventually support multiple ranges but we only use the first one for now. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-17powerpc/powernv/pci: Fallback to OPAL for TCE invalidationsBenjamin Herrenschmidt
If we don't find registers for the PHB or don't know the model specific invalidation method, use OPAL calls instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-17powerpc/powernv/pci: Rework accessing the TCE invalidate registerBenjamin Herrenschmidt
It's architected, always in a known place, so there is no need to keep a separate pointer to it, we use the existing "regs", and we complement it with a real mode variant. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> # Conflicts: # arch/powerpc/platforms/powernv/pci-ioda.c # arch/powerpc/platforms/powernv/pci.h Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-17powerpc/powernv/pci: Remove SWINV constants and obsolete TCE codeBenjamin Herrenschmidt
We have some obsolete code in pnv_pci_p7ioc_tce_invalidate() to handle some internal lab tools that have stopped being useful a long time ago. Remove that along with the definition and test for the TCE_PCI_SWINV_* flags whose value is basically always the same. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-17powerpc/powernv/pci: Rename TCE invalidation callsBenjamin Herrenschmidt
The TCE invalidation functions are fairly implementation specific, and while the IODA specs more/less describe the register, in practice various implementation workarounds may be required. So name the functions after the target PHB. Note today and for the foreseeable future, there's a 1:1 relationship between an IODA version and a PHB implementation. There exist another variant of IODA1 (Torrent) but we never supported in with OPAL and never will. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 14:01:20 +0000