summaryrefslogtreecommitdiff
path: root/arch/powerpc/perf
AgeCommit message (Collapse)Author
2020-04-09Merge tag 'powerpc-5.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "The bulk of this is the series to make CONFIG_COMPAT user-selectable, it's been around for a long time but was blocked behind the syscall-in-C series. Plus there's also a few fixes and other minor things. Summary: - A fix for a crash in machine check handling on pseries (ie. guests) - A small series to make it possible to disable CONFIG_COMPAT, and turn it off by default for ppc64le where it's not used. - A few other miscellaneous fixes and small improvements. Thanks to: Alexey Kardashevskiy, Anju T Sudhakar, Arnd Bergmann, Christophe Leroy, Dan Carpenter, Ganesh Goudar, Geert Uytterhoeven, Geoff Levand, Mahesh Salgaonkar, Markus Elfring, Michal Suchanek, Nicholas Piggin, Stephen Boyd, Wen Xiong" * tag 'powerpc-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: selftests/powerpc: Always build the tm-poison test 64-bit powerpc: Improve ppc_save_regs() Revert "powerpc/64: irq_work avoid interrupt when called with hardware irqs enabled" powerpc/time: Replace <linux/clk-provider.h> by <linux/of_clk.h> powerpc/pseries/ddw: Extend upper limit for huge DMA window for persistent memory powerpc/perf: split callchain.c by bitness powerpc/64: Make COMPAT user-selectable disabled on littleendian by default. powerpc/64: make buildable without CONFIG_COMPAT powerpc/perf: consolidate valid_user_sp -> invalid_user_sp powerpc/perf: consolidate read_user_stack_32 powerpc: move common register copy functions from signal_32.c to signal.c powerpc: Add back __ARCH_WANT_SYS_LLSEEK macro powerpc/ps3: Set CONFIG_UEVENT_HELPER=y in ps3_defconfig powerpc/ps3: Remove an unneeded NULL check powerpc/ps3: Remove duplicate error message powerpc/powernv: Re-enable imc trace-mode in kernel powerpc/perf: Implement a global lock to avoid races between trace, core and thread imc events. powerpc/pseries: Fix MCE handling on pseries selftests/eeh: Skip ahci adapters powerpc/64s: Fix doorbell wakeup msgclr optimisation
2020-04-03powerpc/perf: split callchain.c by bitnessMichal Suchanek
Building callchain.c with !COMPAT proved quite ugly with all the defines. Splitting out the 32bit and 64bit parts looks better. No code change intended. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a20027bf1074935a7934ee2a6757c99ea047e70d.1584699455.git.msuchanek@suse.de
2020-04-03powerpc/64: make buildable without CONFIG_COMPATMichal Suchanek
There are numerous references to 32bit functions in generic and 64bit code so ifdef them out. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e5619617020ef3a1f54f0c076e7d74cb9ec9f3bf.1584699455.git.msuchanek@suse.de
2020-04-03powerpc/perf: consolidate valid_user_sp -> invalid_user_spMichal Suchanek
Merge the 32bit and 64bit version. Halve the check constants on 32bit. Use STACK_TOP since it is defined. Passing is_64 is now redundant since is_32bit_task() is used to determine which callchain variant should be used. Use STACK_TOP and is_32bit_task() directly. This removes a page from the valid 32bit area on 64bit: #define TASK_SIZE_USER32 (0x0000000100000000UL - (1 * PAGE_SIZE)) #define STACK_TOP_USER32 TASK_SIZE_USER32 Change return value to bool. It is inverted by users anyway. Change to invalid_user_sp to avoid inverting the return value twice. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/be8e40fc0737fb28ad08b198552dee7cac1c5ce2.1584699455.git.msuchanek@suse.de
2020-04-03powerpc/perf: consolidate read_user_stack_32Michal Suchanek
There are two almost identical copies for 32bit and 64bit. The function is used only in 32bit code which will be split out in next patch so consolidate to one function. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/0c21c919ed1296420199c78f7c3cfd29d3c7e909.1584699455.git.msuchanek@suse.de
2020-04-03powerpc/perf: Implement a global lock to avoid races between trace, core and ↵Anju T Sudhakar
thread imc events. IMC(In-memory Collection Counters) does performance monitoring in two different modes, i.e accumulation mode(core-imc and thread-imc events), and trace mode(trace-imc events). A cpu thread can either be in accumulation-mode or trace-mode at a time and this is done via the LDBAR register in POWER architecture. The current design does not address the races between thread-imc and trace-imc events. Patch implements a global id and lock to avoid the races between core, trace and thread imc events. With this global id-lock implementation, the system can either run core, thread or trace imc events at a time. i.e. to run any core-imc events, thread/trace imc events should not be enabled/monitored. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200313055238.8656-1-anju@linux.vnet.ibm.com
2020-02-11perf/core: Add new branch sample type for HW index of raw branch recordsKan Liang
The low level index is the index in the underlying hardware buffer of the most recently captured taken branch which is always saved in branch_entries[0]. It is very useful for reconstructing the call stack. For example, in Intel LBR call stack mode, the depth of reconstructed LBR call stack limits to the number of LBR registers. With the low level index information, perf tool may stitch the stacks of two samples. The reconstructed LBR call stack can break the HW limitation. Add a new branch sample type to retrieve low level index of raw branch records. The low level index is between -1 (unknown) and max depth which can be retrieved in /sys/devices/cpu/caps/branches. Only when the new branch sample type is set, the low level index information is dumped into the PERF_SAMPLE_BRANCH_STACK output. Perf tool should check the attr.branch_sample_type, and apply the corresponding format for PERF_SAMPLE_BRANCH_STACK samples. Otherwise, some user case may be broken. For example, users may parse a perf.data, which include the new branch sample type, with an old version perf tool (without the check). Users probably get incorrect information without any warning. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20200127165355.27495-2-kan.liang@linux.intel.com
2020-01-27powerpc/8xx: Use alternative scratch registers in DTLB miss handlerChristophe Leroy
In preparation of handling CONFIG_VMAP_STACK, DTLB miss handler need to use different scratch registers than other exception handlers in order to not jeopardise exception entry on stack DTLB misses. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c5287ea59ae9630f505019b309bf94029241635f.1576916812.git.christophe.leroy@c-s.fr
2020-01-26powerpc: use probe_user_read() and probe_user_write()Christophe Leroy
Instead of opencoding, use probe_user_read() to failessly read a user location and probe_user_write() for writing to user. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e041f5eedb23f09ab553be8a91c3de2087147320.1579800517.git.christophe.leroy@c-s.fr
2019-11-30Merge tag 'powerpc-5.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Infrastructure for secure boot on some bare metal Power9 machines. The firmware support is still in development, so the code here won't actually activate secure boot on any existing systems. - A change to xmon (our crash handler / pseudo-debugger) to restrict it to read-only mode when the kernel is lockdown'ed, otherwise it's trivial to drop into xmon and modify kernel data, such as the lockdown state. - Support for KASLR on 32-bit BookE machines (Freescale / NXP). - Fixes for our flush_icache_range() and __kernel_sync_dicache() (VDSO) to work with memory ranges >4GB. - Some reworks of the pseries CMM (Cooperative Memory Management) driver to make it behave more like other balloon drivers and enable some cleanups of generic mm code. - A series of fixes to our hardware breakpoint support to properly handle unaligned watchpoint addresses. Plus a bunch of other smaller improvements, fixes and cleanups. Thanks to: Alastair D'Silva, Andrew Donnellan, Aneesh Kumar K.V, Anthony Steinhauser, Cédric Le Goater, Chris Packham, Chris Smart, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig, Claudio Carvalho, Daniel Axtens, David Hildenbrand, Deb McLemore, Diana Craciun, Eric Richter, Geert Uytterhoeven, Greg Kroah-Hartman, Greg Kurz, Gustavo L. F. Walbon, Hari Bathini, Harish, Jason Yan, Krzysztof Kozlowski, Leonardo Bras, Mathieu Malaterre, Mauro S. M. Rodrigues, Michal Suchanek, Mimi Zohar, Nathan Chancellor, Nathan Lynch, Nayna Jain, Nick Desaulniers, Oliver O'Halloran, Qian Cai, Rasmus Villemoes, Ravi Bangoria, Sam Bobroff, Santosh Sivaraj, Scott Wood, Thomas Huth, Tyrel Datwyler, Vaibhav Jain, Valentin Longchamp, YueHaibing" * tag 'powerpc-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (144 commits) powerpc/fixmap: fix crash with HIGHMEM x86/efi: remove unused variables powerpc: Define arch_is_kernel_initmem_freed() for lockdep powerpc/prom_init: Use -ffreestanding to avoid a reference to bcmp powerpc: Avoid clang warnings around setjmp and longjmp powerpc: Don't add -mabi= flags when building with Clang powerpc: Fix Kconfig indentation powerpc/fixmap: don't clear fixmap area in paging_init() selftests/powerpc: spectre_v2 test must be built 64-bit powerpc/powernv: Disable native PCIe port management powerpc/kexec: Move kexec files into a dedicated subdir. powerpc/32: Split kexec low level code out of misc_32.S powerpc/sysdev: drop simple gpio powerpc/83xx: map IMMR with a BAT. powerpc/32s: automatically allocate BAT in setbat() powerpc/ioremap: warn on early use of ioremap() powerpc: Add support for GENERIC_EARLY_IOREMAP powerpc/fixmap: Use __fix_to_virt() instead of fix_to_virt() powerpc/8xx: use the fixmapped IMMR in cpm_reset() powerpc/8xx: add __init to cpm1 init functions ...
2019-11-13powerpc/perf: remove current_is_64bit()Michal Suchanek
Since commit ed1cd6deb013 ("powerpc: Activate CONFIG_THREAD_INFO_IN_TASK") current_is_64bit() is quivalent to !is_32bit_task(). Remove the redundant function. Suggested-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190912194633.12045-1-msuchanek@suse.de
2019-10-17perf_event: Add support for LSM and SELinux checksJoel Fernandes (Google)
In current mainline, the degree of access to perf_event_open(2) system call depends on the perf_event_paranoid sysctl. This has a number of limitations: 1. The sysctl is only a single value. Many types of accesses are controlled based on the single value thus making the control very limited and coarse grained. 2. The sysctl is global, so if the sysctl is changed, then that means all processes get access to perf_event_open(2) opening the door to security issues. This patch adds LSM and SELinux access checking which will be used in Android to access perf_event_open(2) for the purposes of attaching BPF programs to tracepoints, perf profiling and other operations from userspace. These operations are intended for production systems. 5 new LSM hooks are added: 1. perf_event_open: This controls access during the perf_event_open(2) syscall itself. The hook is called from all the places that the perf_event_paranoid sysctl is checked to keep it consistent with the systctl. The hook gets passed a 'type' argument which controls CPU, kernel and tracepoint accesses (in this context, CPU, kernel and tracepoint have the same semantics as the perf_event_paranoid sysctl). Additionally, I added an 'open' type which is similar to perf_event_paranoid sysctl == 3 patch carried in Android and several other distros but was rejected in mainline [1] in 2016. 2. perf_event_alloc: This allocates a new security object for the event which stores the current SID within the event. It will be useful when the perf event's FD is passed through IPC to another process which may try to read the FD. Appropriate security checks will limit access. 3. perf_event_free: Called when the event is closed. 4. perf_event_read: Called from the read(2) and mmap(2) syscalls for the event. 5. perf_event_write: Called from the ioctl(2) syscalls for the event. [1] https://lwn.net/Articles/696240/ Since Peter had suggest LSM hooks in 2016 [1], I am adding his Suggested-by tag below. To use this patch, we set the perf_event_paranoid sysctl to -1 and then apply selinux checking as appropriate (default deny everything, and then add policy rules to give access to domains that need it). In the future we can remove the perf_event_paranoid sysctl altogether. Suggested-by: Peter Zijlstra <peterz@infradead.org> Co-developed-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: James Morris <jmorris@namei.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: rostedt@goodmis.org Cc: Yonghong Song <yhs@fb.com> Cc: Kees Cook <keescook@chromium.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: jeffv@google.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: primiano@google.com Cc: Song Liu <songliubraving@fb.com> Cc: rsavitski@google.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Matthew Garrett <matthewgarrett@google.com> Link: https://lkml.kernel.org/r/20191014170308.70668-1-joel@joelfernandes.org
2019-08-20powerpc/perf: fix imc allocation failure handlingNicholas Piggin
The alloc_pages_node return value should be tested for failure before being passed to page_address. Tested-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190724084638.24982-3-npiggin@gmail.com
2019-07-13Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-07-04powerpc/perf/24x7: use rb_entryGeliang Tang
To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-19powerpc/perf: Use cpumask_last() to determine the designated cpu for ↵Anju T Sudhakar
nest/core units. Nest and core IMC (In-Memory Collection counters) assigns a particular cpu as the designated target for counter data collection. During system boot, the first online cpu in a chip gets assigned as the designated cpu for that chip(for nest-imc) and the first online cpu in a core gets assigned as the designated cpu for that core(for core-imc). If the designated cpu goes offline, the next online cpu from the same chip(for nest-imc)/core(for core-imc) is assigned as the next target, and the event context is migrated to the target cpu. Currently, cpumask_any_but() function is used to find the target cpu. Though this function is expected to return a `random` cpu, this always returns the next online cpu. If all cpus in a chip/core is offlined in a sequential manner, starting from the first cpu, the event migration has to happen for all the cpus which goes offline. Since the migration process involves a grace period, the total time taken to offline all the cpus will be significantly high. Example: In a system which has 2 sockets, with NUMA node0 CPU(s): 0-87 NUMA node8 CPU(s): 88-175 Time taken to offline cpu 88-175: real 2m56.099s user 0m0.191s sys 0m0.000s Use cpumask_last() to choose the target cpu, when the designated cpu goes online, so the migration will happen only when the last_cpu in the mask goes offline. This way the time taken to offline all cpus in a chip/core can be reduced. With the patch: Time taken to offline cpu 88-175: real 0m12.207s user 0m0.171s sys 0m0.000s Offlining all cpus in reverse order is also taken care because, cpumask_any_but() is used to find the designated cpu if the last cpu in the mask goes offline. Since cpumask_any_but() always return the first cpu in the mask, that becomes the designated cpu and migration will happen only when the first_cpu in the mask goes offline. Example: With the patch, Time taken to offline cpu from 175-88: real 0m9.330s user 0m0.110s sys 0m0.000s Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-02Merge tag 'powerpc-5.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A minor fix to our IMC PMU code to print a less confusing error message when the driver can't initialise properly. A fix for a bug where a user requesting an unsupported branch sampling filter can corrupt PMU state, preventing the PMU from counting properly. And finally a fix for a bug in our support for kexec_file_load(), which prevented loading a kernel and initramfs. Most versions of kexec don't yet use kexec_file_load(). Thanks to: Anju T Sudhakar, Dave Young, Madhavan Srinivasan, Ravi Bangoria, Thiago Jung Bauermann" * tag 'powerpc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load() powerpc/perf: Fix MMCRA corruption by bhrb_filter powerpc/powernv: Return for invalid IMC domain
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 138Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100844.067492367@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 4 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091650.480557885@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-22powerpc/perf: Fix MMCRA corruption by bhrb_filterRavi Bangoria
Consider a scenario where user creates two events: 1st event: attr.sample_type |= PERF_SAMPLE_BRANCH_STACK; attr.branch_sample_type = PERF_SAMPLE_BRANCH_ANY; fd = perf_event_open(attr, 0, 1, -1, 0); This sets cpuhw->bhrb_filter to 0 and returns valid fd. 2nd event: attr.sample_type |= PERF_SAMPLE_BRANCH_STACK; attr.branch_sample_type = PERF_SAMPLE_BRANCH_CALL; fd = perf_event_open(attr, 0, 1, -1, 0); It overrides cpuhw->bhrb_filter to -1 and returns with error. Now if power_pmu_enable() gets called by any path other than power_pmu_add(), ppmu->config_bhrb(-1) will set MMCRA to -1. Fixes: 3925f46bb590 ("powerpc/perf: Enable branch stack sampling framework") Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Trace imc PMU functionsAnju T Sudhakar
Add PMU functions to support trace-imc. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Trace imc events detection and cpuhotplugAnju T Sudhakar
Patch detects trace-imc events, does memory initilizations for each online cpu, and registers cpuhotplug call-backs. Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Add privileged access check for thread_imcMadhavan Srinivasan
Add code to restrict user access to thread_imc pmu since some event report privilege level information. Fixes: f74c89bd80fb3 ("powerpc/perf: Add thread IMC PMU support") Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Rearrange setting of ldbar for thread-imcAnju T Sudhakar
LDBAR holds the memory address allocated for each cpu. For thread-imc the mode bit (i.e bit 1) of LDBAR is set to accumulation. Currently, ldbar is loaded with per cpu memory address and mode set to accumulation at boot time. To enable trace-imc, the mode bit of ldbar should be set to 'trace'. So to accommodate trace-mode of IMC, reposition setting of ldbar for thread-imc to thread_imc_event_add(). Also reset ldbar at thread_imc_event_del(). Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Fix loop exit condition in nest_imc_event_initAnju T Sudhakar
The data structure (i.e struct imc_mem_info) to hold the memory address information for nest imc units is allocated based on the number of nodes in the system. nest_imc_event_init() traverse this struct array to calculate the memory base address for the event-cpu. If we fail to find a match for the event cpu's chip-id in imc_mem_info struct array, then the do-while loop will iterate until we crash. Fix this by changing the loop exit condition based on the number of non zero vbase elements in the array, since the allocation is done for nr_chips + 1. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Return accordingly on invalid chip-id inAnju T Sudhakar
Nest hardware counter memory resides in a per-chip reserve-memory. During nest_imc_event_init(), chip-id of the event-cpu is considered to calculate the base memory addresss for that cpu. Return, proper error condition if the chip_id calculated is invalid. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 885dcd709ba91 ("powerpc/perf: Add nest IMC PMU support") Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Remove PM_BR_CMPL_ALT from power9 event listMadhavan Srinivasan
PM_BR_CMPL_ALT event is not supported, remove it from the power9 event list. Fixes: 24bedcb7c811 ("powerpc/perf: Fix branch event code for power9") Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: Add generic compat mode pmu driverMadhavan Srinivasan
Most of the power processor generation performance monitoring unit (PMU) driver code is bundled in the kernel and one of those is enabled/registered based on the oprofile_cpu_type check at the boot. But things get little tricky incase of "compat" mode boot. IBM POWER System Server based processors has a compactibility mode feature, which simpily put is, Nth generation processor (lets say POWER8) will act and appear in a mode consistent with an earlier generation (N-1) processor (that is POWER7). And in this "compat" mode boot, kernel modify the "oprofile_cpu_type" to be Nth generation (POWER8). If Nth generation pmu driver is bundled (POWER8), it gets registered. Key dependency here is to have distro support for latest processor performance monitoring support. Patch here adds a generic "compat-mode" performance monitoring driver to be register in absence of powernv platform specific pmu driver. Driver supports only "cycles" and "instruction" events. "0x0001e" used as event code for "cycles" and "0x00002" used as event code for "instruction" events. New file called "generic-compat-pmu.c" is created to contain the driver specific code. And base raw event code format modeled on PPMU_ARCH_207S. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Use SPDX tag for license] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc/perf: init pmu from core-book3sMadhavan Srinivasan
Currenty pmu driver file for each ppc64 generation processor has a __init call in itself. Refactor the code by moving the __init call to core-books.c. This also clean's up compat mode pmu driver registration. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> [mpe: Use SPDX tag for license] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-07Merge tag 'powerpc-5.1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Enable THREAD_INFO_IN_TASK to move thread_info off the stack. - A big series from Christoph reworking our DMA code to use more of the generic infrastructure, as he said: "This series switches the powerpc port to use the generic swiotlb and noncoherent dma ops, and to use more generic code for the coherent direct mapping, as well as removing a lot of dead code." - Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing us to support machines with larger amounts of total RAM or distance between nodes. - Two series from Christophe, one to optimise TLB miss handlers on 6xx, and another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit CPUs. - Support for KCOV coverage instrumentation which means we can run syzkaller and discover even more bugs in our code. And as always many clean-ups, reworks and minor fixes etc. Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain, YueHaibing" * tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/32: Clear on-stack exception marker upon exception return powerpc: Remove export of save_stack_trace_tsk_reliable() powerpc/mm: fix "section_base" set but not used powerpc/mm: Fix "sz" set but not used warning powerpc/mm: Check secondary hash page table powerpc: remove nargs from __SYSCALL powerpc/64s: Fix unrelocated interrupt trampoline address test powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables powerpc/fsl: Fix the flush of branch predictor. powerpc/powernv: Make opal log only readable by root powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C powerpc/64s: Fix data interrupts vs d-side MCE reentrancy powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy powerpc/64s: system reset interrupt preserve HSRRs powerpc/64s: Fix HV NMI vs HV interrupt recoverability test powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback selftests/powerpc: Remove duplicate header powerpc sstep: Add support for modsd, modud instructions ...
2019-02-19Merge branch 'fixes' into nextMichael Ellerman
There's a few important fixes in our fixes branch, in particular the pgd/pud_present() one, so merge it now.
2019-02-04Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-31powerpc/perf: Add mem access events to sysfsMadhavan Srinivasan
Add mem-loads/mem-stores events to sysfs. The event is formed based on raw event encoding. Primary PMU event used here is PM_MRK_INST_CMPL along with MMCRA[SM] modes and Thresholding bit Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-21perf/core, arch/powerpc: use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable ↵Andrew Murray
PMUs For PowerPC PMUs that do not support context exclusion let's advertise the PERF_PMU_CAP_NO_EXCLUDE capability. This ensures that perf will prevent us from handling events where any exclusion flags are set. Let's also remove the now unnecessary check for exclusion flags. Signed-off-by: Andrew Murray <andrew.murray@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@armlinux.org.uk> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Cc: robin.murphy@arm.com Cc: suzuki.poulose@arm.com Link: https://lkml.kernel.org/r/1547128414-50693-10-git-send-email-andrew.murray@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-01-08powerpc/perf: Update perf_regs structure to include MMCRAMadhavan Srinivasan
On each sample, Monitor Mode Control Register A (MMCRA) content is saved in pt_regs. MMCRA does not have a entry as-is in the pt_regs but instead, MMCRA content is saved in the "dsisr" register of pt_regs. Patch adds another entry to the perf_regs structure to include the "MMCRA" printing which internally maps to the "dsisr" of pt_regs. It also check for the MMCRA availability in the platform and present value accordingly mpe: This was the 2nd patch in a series with commit 333804dc3b7a ("powerpc/perf: Update perf_regs structure to include SIER") but I accidentally only merged the 1st patch, so merge this one now. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-21Powerpc/perf: Wire up PMI throttlingRavi Bangoria
Commit 14c63f17b1fde ("perf: Drop sample rate when sampling is too slow") introduced a way to throttle PMU interrupts if we're spending too much time just processing those. Wire up powerpc PMI handler to use this infrastructure. We have throttling of the *rate* of interrupts, but this adds throttling based on the *time taken* to process the interrupts. Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/perf: Remove l2 bus events from HW cache event arrayMadhavan Srinivasan
Remove PM_L2_ST_MISS and PM_L2_ST from HW cache event array since these are bus events. And these needs to be programmed in groups. Hence remove them. Fixes: f1fb60bfde65 ('powerpc/perf: Export Power9 generic and cache events to sysfs') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/perf: Add constraints for power9 l2/l3 bus eventsMadhavan Srinivasan
In previous generation processors, both bus events and direct events of performance monitoring unit can be individually programmabled and monitored in PMCs. But in Power9, L2/L3 bus events are always available as a "bank" of 4 events. To obtain the counts for any of the l2/l3 bus events in a given bank, the user will have to program PMC4 with corresponding l2/l3 bus event for that bank. Patch enforce two contraints incase of L2/L3 bus events. 1)Any L2/L3 event when programmed is also expected to program corresponding PMC4 event from that group. 2)PMC4 event should always been programmed first due to group constraint logic limitation For ex. consider these L3 bus events PM_L3_PF_ON_CHIP_MEM (0x460A0), PM_L3_PF_MISS_L3 (0x160A0), PM_L3_CO_MEM (0x260A0), PM_L3_PF_ON_CHIP_CACHE (0x360A0), 1) This is an INVALID group for L3 Bus event monitoring, since it is missing PMC4 event. perf stat -e "{r160A0,r260A0,r360A0}" < > And this is a VALID group for L3 Bus events: perf stat -e "{r460A0,r160A0,r260A0,r360A0}" < > 2) This is an INVALID group for L3 Bus event monitoring, since it is missing PMC4 event. perf stat -e "{r260A0,r360A0}" < > And this is a VALID group for L3 Bus events: perf stat -e "{r460A0,r260A0,r360A0}" < > 3) This is an INVALID group for L3 Bus event monitoring, since it is missing PMC4 event. perf stat -e "{r360A0}" < > And this is a VALID group for L3 Bus events: perf stat -e "{r460A0,r360A0}" < > Patch here implements group constraint logic suggested by Michael Ellerman. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/perf: Fix unit_sel/cache_sel checksMadhavan Srinivasan
Raw event code has couple of fields "unit" and "cache" in it, to capture the "unit" to monitor for a given pmcxsel and cache reload qualifier to program in MMCR1. isa207_get_constraint() refers "unit" field to update the MMCRC (L2/L3) Event bus control fields with "cache" bits of the raw event code. These are power8 specific and not supported by PowerISA v3.0 pmu. So wrap the checks to be power8 specific. Also, "cache" bit field is referred to update MMCR1[16:17] and this check can be power8 specific. Fixes: 7ffd948fae4cd ('powerpc/perf: factor out power8 pmu functions') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/perf: Cleanup cache_sel bits commentMadhavan Srinivasan
Update the raw event code comment in power9-pmu.c with respect to "cache" bits, since power9 MMCRC does not support these. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/perf: Update perf_regs structure to include SIERMadhavan Srinivasan
On each sample, Sample Instruction Event Register (SIER) content is saved in pt_regs. SIER does not have a entry as-is in the pt_regs but instead, SIER content is saved in the "dar" register of pt_regs. Patch adds another entry to the perf_regs structure to include the "SIER" printing which internally maps to the "dar" of pt_regs. It also check for the SIER availability in the platform and present value accordingly Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-20powerpc/perf: Fix thresholding counter data for unknown typeMadhavan Srinivasan
MMCRA[34:36] and MMCRA[38:44] expose the thresholding counter value. Thresholding counter can be used to count latency cycles such as load miss to reload. But threshold counter value is not relevant when the sampled instruction type is unknown or reserved. Patch to fix the thresholding counter value to zero when sampled instruction type is unknown or reserved. Fixes: 170a315f41c6('powerpc/perf: Support to export MMCRA[TEC*] field to userspace') Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-25powerpc/perf: Declare static identifier a suchBreno Leitao
There are three symbols (two variables and a function) that are being used solely in the same file (imc-pmu.c), thus, these symbols should be static, but they are not. This was detected by sparse: arch/powerpc/perf/imc-pmu.c:31:20: warning: symbol 'nest_imc_refc' was not declared. Should it be static? arch/powerpc/perf/imc-pmu.c:37:20: warning: symbol 'core_imc_refc' was not declared. Should it be static? arch/powerpc/perf/imc-pmu.c:46:16: warning: symbol 'imc_event_to_pmu' was not declared. Should it be static? This patch simply adds the 'static' storage-class definition to these symbols, thus, restricting their usage only in the imc-pmu.c file. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-26powerpc/8xx: Use patch_site for perf counters setupChristophe Leroy
The 8xx TLB miss routines are patched when (de)activating perf counters. This patch uses the new patch_site functionality in order to get a better code readability and avoid a label mess when dumping the code with 'objdump -d' Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19powerpc: Add -Werror at arch/powerpc levelMichael Ellerman
Back when I added -Werror in commit ba55bd74360e ("powerpc: Add configurable -Werror for arch/powerpc") I did it by adding it to most of the arch Makefiles. At the time we excluded math-emu, because apparently it didn't build cleanly. But that seems to have been fixed somewhere in the interim. So move the -Werror addition to the top-level of the arch, this saves us from repeating it in every Makefile and means we won't forget to add it to any new sub-dirs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-13powerpc/perf: Quiet IMC PMU registration messageJoel Stanley
On a Power9 box we get a few screens full of these on boot. Drop them to pr_debug. [ 5.993645] nest_centaur6_imc performance monitor hardware support registered [ 5.993728] nest_centaur7_imc performance monitor hardware support registered [ 5.996510] core_imc performance monitor hardware support registered [ 5.996569] nest_mba0_imc performance monitor hardware support registered [ 5.996631] nest_mba1_imc performance monitor hardware support registered [ 5.996685] nest_mba2_imc performance monitor hardware support registered Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by: Stewart Smith <stewart@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03powerpc/perf: Add missing break in power7_marked_instr_event()Michael Ellerman
In power7_marked_instr_event() there is a switch case that is missing a break or an explicit fallthrough, it's not immediately clear which it should be. The function determines based on the PMU event code, whether the event is a "marked" event (which then requires us to configure the PMU in a certain way). On Power7 there is no specific bit(s) in the event to tell us that, we just have to know. Rather than having a full list of every event and whether they are marked, we pull apart the event code and for events with certain values of certain fields we can say that those are all marked events. We take the psel (bits 0-7) of the event, and look at bits 4-7. For a value of 6 we say that if the entire psel == 0x64 then if the pmc == 3 the event is marked, else not, and otherwise we continue. It is then that we fallthrough to the 8 case, where we return true if the unit == 0xd. The question is should the 6 case also fallthrough and check for unit == 0xd, or should it return. Looking at the full list of events we see that there are zero events where (psel >> 4) == 0x6 and unit == 0xd. So the answer is it doesn't really matter, there are no valid event codes that will return a different result whether we fallthrough or break. But equally, testing the 6 case events against unit == 0xd is slightly bogus, as there are no such events. So to make the code clearer, and avoid any future confusion, have the 6 case break rather than falling through. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
2018-08-17Merge tag 'powerpc-4.19-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - A fix for a bug in our page table fragment allocator, where a page table page could be freed and reallocated for something else while still in use, leading to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for a powerpc only refcount. - Fixes to our pkey support. Several are user-visible changes, but bring us in to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer for reporting many of these. - A series to improve the hvc driver & related OPAL console code, which have been seen to cause hardlockups at times. The hvc driver changes in particular have been in linux-next for ~month. - Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y. - Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use anywhere other than as a paper weight. - An optimised memcmp implementation using Power7-or-later VMX instructions - Support for barrier_nospec on some NXP CPUs. - Support for flushing the count cache on context switch on some IBM CPUs (controlled by firmware), as a Spectre v2 mitigation. - A series to enhance the information we print on unhandled signals to bring it into line with other arches, including showing the offending VMA and dumping the instructions around the fault. Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand, Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao, zhong jiang" * tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits) powerpc/mm/book3s/radix: Add mapping statistics powerpc/uaccess: Enable get_user(u64, *p) on 32-bit powerpc/mm/hash: Remove unnecessary do { } while(0) loop powerpc/64s: move machine check SLB flushing to mm/slb.c powerpc/powernv/idle: Fix build error powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range powerpc/mm: remove warning about ‘type’ being set powerpc/32: Include setup.h header file to fix warnings powerpc: Move `path` variable inside DEBUG_PROM powerpc/powermac: Make some functions static powerpc/powermac: Remove variable x that's never read cxl: remove a dead branch powerpc/powermac: Add missing include of header pmac.h powerpc/kexec: Use common error handling code in setup_new_fdt() powerpc/xmon: Add address lookup for percpu symbols powerpc/mm: remove huge_pte_offset_and_shift() prototype powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled powerpc/pseries: Fix endianness while restoring of r3 in MCE handler. powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements powerpc/fadump: handle crash memory ranges array index overflow ...
2018-08-08powerpc/perf: Remove sched_task function defined for thread-imcAnju T Sudhakar
Call trace observed while running perf-fuzzer: CPU: 43 PID: 9088 Comm: perf_fuzzer Not tainted 4.13.0-32-generic #35~lp1746225 task: c000003f776ac900 task.stack: c000003f77728000 NIP: c000000000299b70 LR: c0000000002a4534 CTR: c00000000029bb80 REGS: c000003f7772b760 TRAP: 0700 Not tainted (4.13.0-32-generic) MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 24008822 XER: 00000000 CFAR: c000000000299a70 SOFTE: 0 GPR00: c0000000002a4534 c000003f7772b9e0 c000000001606200 c000003fef858908 GPR04: c000003f776ac900 0000000000000001 ffffffffffffffff 0000003fee730000 GPR08: 0000000000000000 0000000000000000 c0000000011220d8 0000000000000002 GPR12: c00000000029bb80 c000000007a3d900 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c000003f776ad090 c000000000c71354 GPR24: c000003fef716780 0000003fee730000 c000003fe69d4200 c000003f776ad330 GPR28: c0000000011220d8 0000000000000001 c0000000014c6108 c000003fef858900 NIP [c000000000299b70] perf_pmu_sched_task+0x170/0x180 LR [c0000000002a4534] __perf_event_task_sched_in+0xc4/0x230 Call Trace: perf_iterate_sb+0x158/0x2a0 (unreliable) __perf_event_task_sched_in+0xc4/0x230 finish_task_switch+0x21c/0x310 __schedule+0x304/0xb80 schedule+0x40/0xc0 do_wait+0x254/0x2e0 kernel_wait4+0xa0/0x1a0 SyS_wait4+0x64/0xc0 system_call+0x58/0x6c Instruction dump: 3beafea0 7faa4800 409eff18 e8010060 eb610028 ebc10040 7c0803a6 38210050 eb81ffe0 eba1ffe8 ebe1fff8 4e800020 <0fe00000> 4bffffbc 60000000 60420000 ---[ end trace 8c46856d314c1811 ]--- The context switch call-backs for thread-imc are defined in sched_task function. So when thread-imc events are grouped with software pmu events, perf_pmu_sched_task hits the WARN_ON_ONCE condition, since software PMUs are assumed not to have a sched_task defined. Patch to move the thread_imc enable/disable opal call back from sched_task to event_[add/del] function Fixes: f74c89bd80fb ("powerpc/perf: Add thread IMC PMU support") Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Tested-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:09:25 +0000