summaryrefslogtreecommitdiff
path: root/arch/powerpc/perf/core-fsl-emb.c
AgeCommit message (Collapse)Author
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-03powerpc/pmu/fsl: fix is_nmi test for irq mask changeNicholas Piggin
When soft enabled was changed to irq disabled mask, this test missed being converted (although the equivalent book3s test was converted). The PMU drivers consider it an NMI when they take a PMI while general interrupts are disabled. This change restores that behaviour. Fixes: 01417c6cc7 ("powerpc/64: Change soft_enabled from flag to bitmask") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-16perf: Fix sibling iterationPeter Zijlstra
Mark noticed that the change to sibling_list changed some iteration semantics; because previously we used group_list as list entry, sibling events would always have an empty sibling_list. But because we now use sibling_list for both list head and list entry, siblings will report as having siblings. Fix this with a custom for_each_sibling_event() iterator. Fixes: 8343aae66167 ("perf/core: Remove perf_event::group_entry") Reported-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: vincent.weaver@maine.edu Cc: alexander.shishkin@linux.intel.com Cc: torvalds@linux-foundation.org Cc: alexey.budankov@linux.intel.com Cc: valery.cherepennikov@intel.com Cc: eranian@google.com Cc: acme@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: davidcc@google.com Cc: kan.liang@intel.com Cc: Dmitry.Prohorov@intel.com Cc: jolsa@redhat.com Link: https://lkml.kernel.org/r/20180315170129.GX4043@hirez.programming.kicks-ass.net
2018-03-12perf/core: Remove perf_event::group_entryPeter Zijlstra
Now that all the grouping is done with RB trees, we no longer need group_entry and can replace the whole thing with sibling_list. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitri Prokhorov <Dmitry.Prohorov@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Valery Cherepennikov <valery.cherepennikov@intel.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-29perf/powerpc: reset event hw state when adding it to the PMUAlexandru-Cezar Sardan
When adding an event to the PMU with PERF_EF_START the STOPPED and UPTODATE flags need to be cleared in the hw.event status variable because they are preventing the update of the event count on overflow interrupt. Signed-off-by: Alexandru-Cezar Sardan <alexandru.sardan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-01-29powerpc/perf: fix fsl_emb_pmu_start to write correct pmc valueTom Huynh
PMCs on PowerPC increases towards 0x80000000 and triggers an overflow interrupt when the msb is set to collect a sample. Therefore, to setup for the next sample collection, pmu_start should set the pmc value to 0x80000000 - left instead of left which incorrectly delays the next overflow interrupt. Same as commit 9a45a9407c69 ("powerpc/perf: power_pmu_start restores incorrect values, breaking frequency events") for book3s. Signed-off-by: Tom Huynh <tom.huynh@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2014-11-03powerpc: Replace __get_cpu_var usesChristoph Lameter
This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2013-08-07powerpc/perf: add 2 additional performance monitor counters for e6500 coreLijun Pan
There are 6 counters in e6500 core instead of 4 in e500 core. Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-08-07powerpc/perf: increase the perf HW events to 6Catalin Udma
This change is required after the e6500 perf support has been added. There are 6 counters in e6500 core instead of 4 in e500 core and the MAX_HWEVENTS counter should be changed accordingly from 4 to 6. Added also runtime check for counters overflow. Signed-off-by: Catalin Udma <catalin.udma@freescale.com> Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2012-05-09perf: Pass last sampling period to perf_sample_data_init()Robert Richter
We always need to pass the last sample period to perf_sample_data_init(), otherwise the event distribution will be wrong. Thus, modifiyng the function interface with the required period as argument. So basically a pattern like this: perf_sample_data_init(&data, ~0ULL); data.period = event->hw.last_period; will now be like that: perf_sample_data_init(&data, ~0ULL, event->hw.last_period); Avoids unininitialized data.period and simplifies code. Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1333390758-10893-3-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-02-23powerpc/perf: Move perf core & PMU code into a subdirectoryMichael Ellerman
The perf code has grown a lot since it started, and is big enough to warrant its own subdirectory. For reference it's ~60% bigger than the oprofile code. It declutters the kernel directory, makes it simpler to grep for "just perf stuff", and allows us to shorten some filenames. While we're at it, make it more obvious that we have two implementations of the core perf logic. One for (roughly) Book3S CPUs, which was the original implementation, and the other for Freescale embedded CPUs. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>