summaryrefslogtreecommitdiff
path: root/arch/powerpc/lib
AgeCommit message (Collapse)Author
2019-09-12powerpc/memcpy: Fix stack corruption for smaller sizesSantosh Sivaraj
For sizes lesser than 128 bytes, the code branches out early without saving the stack frame, which when restored later drops frame of the caller. Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Santosh Sivaraj <santosh@fossix.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190903214359.23887-1-santosh@fossix.org
2019-08-27powerpc/spinlocks: Rename SPLPAR-only spinlocksChristopher M. Riedl
The __rw_yield and __spin_yield locks only pertain to SPLPAR mode. Rename them to make this relationship obvious. Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf> Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190813031314.1828-3-cmr@informatik.wtf
2019-08-21powerpc/memcpy: Add memcpy_mcsafe for pmemBalbir Singh
The pmem infrastructure uses memcpy_mcsafe in the pmem layer so as to convert machine check exceptions into a return value on failure in case a machine check exception is encountered during the memcpy. The return value is the number of bytes remaining to be copied. This patch largely borrows from the copyuser_power7 logic and does not add the VMX optimizations, largely to keep the patch simple. If needed those optimizations can be folded in. Signed-off-by: Balbir Singh <bsingharora@gmail.com> [arbab@linux.ibm.com: Added symbol export] Co-developed-by: Santosh Sivaraj <santosh@fossix.org> Signed-off-by: Santosh Sivaraj <santosh@fossix.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190820081352.8641-7-santosh@fossix.org
2019-08-05powerpc/32: activate ARCH_HAS_PMEM_API and ARCH_HAS_UACCESS_FLUSHCACHEChristophe Leroy
PPC32 also have flush_dcache_range() so it can also support ARCH_HAS_PMEM_API and ARCH_HAS_UACCESS_FLUSHCACHE without changes. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/a682a2f9db308c5cfe77e45aa3352e41bc9f4e33.1564554634.git.christophe.leroy@c-s.fr
2019-07-13Merge tag 'powerpc-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver, as well as some other functions only used by drivers that haven't (yet?) made it upstream. - A fix for a bug in our handling of hardware watchpoints (eg. perf record -e mem: ...) which could lead to register corruption and kernel crashes. - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for vmalloc when using the Radix MMU. - A large but incremental rewrite of our exception handling code to use gas macros rather than multiple levels of nested CPP macros. And the usual small fixes, cleanups and improvements. Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab, Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann, Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz, Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj Jitindar Singh, Thiago Jung Bauermann, YueHaibing" * tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits) powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state. powerpc/eeh: Handle hugepages in ioremap space ocxl: Update for AFU descriptor template version 1.1 powerpc/boot: pass CONFIG options in a simpler and more robust way powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h powerpc/irq: Don't WARN continuously in arch_local_irq_restore() powerpc/module64: Use symbolic instructions names. powerpc/module32: Use symbolic instructions names. powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h powerpc/module64: Fix comment in R_PPC64_ENTRY handling powerpc/boot: Add lzo support for uImage powerpc/boot: Add lzma support for uImage powerpc/boot: don't force gzipped uImage powerpc/8xx: Add microcode patch to move SMC parameter RAM. powerpc/8xx: Use IO accessors in microcode programming. powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c powerpc/8xx: refactor programming of microcode CPM params. powerpc/8xx: refactor printing of microcode patch name. powerpc/8xx: Refactor microcode write powerpc/8xx: refactor writing of CPM microcode arrays ...
2019-07-05powerpc/64: flush_inval_dcache_range() becomes flush_dcache_range()Christophe Leroy
On most arches having function flush_dcache_range(), including PPC32, this function does a writeback and invalidation of the cache bloc. On PPC64, flush_dcache_range() only does a writeback while flush_inval_dcache_range() does the invalidation in addition. In addition it looks like within arch/powerpc/, there are no PPC64 platforms using flush_dcache_range() This patch drops the existing 64 bits version of flush_dcache_range() and renames flush_inval_dcache_range() into flush_dcache_range(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28powerpc/lib: only build ldstfp.o when CONFIG_PPC_FPU is setChristophe Leroy
The entire code in ldstfp.o is enclosed into #ifdef CONFIG_PPC_FPU, so there is no point in building it when this config is not selected. Fixes: cd64d1697cf0 ("powerpc: mtmsrd not defined") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-28powerpc/lib: fix redundant inclusion of quad.oChristophe Leroy
quad.o is only for PPC64, and already included in obj64-y, so it doesn't have to be in obj-y Fixes: 31bfdb036f12 ("powerpc: Use instruction emulation infrastructure to handle alignment faults") Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc: disable KASAN instrumentation on early/critical files.Christophe Leroy
All files containing functions run before kasan_early_init() is called must have KASAN instrumentation disabled. For those file, branch profiling also have to be disabled otherwise each if () generates a call to ftrace_likely_update(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-03powerpc: prepare string/mem functions for KASANChristophe Leroy
CONFIG_KASAN implements wrappers for memcpy() memmove() and memset() Those wrappers are doing the verification then call respectively __memcpy() __memmove() and __memset(). The arches are therefore expected to rename their optimised functions that way. For files on which KASAN is inhibited, #defines are used to allow them to directly call optimised versions of the functions without going through the KASAN wrappers. See commit 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") for details. Other string / mem functions do not (yet) have kasan wrappers, we therefore have to fallback to the generic versions when KASAN is active, otherwise KASAN checks will be skipped. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> [mpe: Fixups to keep selftests working] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-21powerpc/lib: Refactor __patch_instruction() to use __put_user_asm()Russell Currey
__patch_instruction() is called in early boot, and uses __put_user_size(), which includes the allow/prevent calls to enforce KUAP, which could either be called too early, or in the Radix case, forced to use "early_" versions of functions just to safely handle this one case. __put_user_asm() does not do this, and thus is safe to use both in early boot, and later on since in this case it should only ever be touching kernel memory. __patch_instruction() was previously refactored to use __put_user_size() in order to be able to return -EFAULT, which would allow the kernel to patch instructions in userspace, which should never happen. This has the functional change of causing faults on userspace addresses if KUAP is turned on, which should never happen in practice. A future enhancement could be to double check the patch address is definitely allowed to be tampered with by the kernel. Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-21powerpc: Add a framework for Kernel Userspace Access ProtectionChristophe Leroy
This patch implements a framework for Kernel Userspace Access Protection. Then subarches will have the possibility to provide their own implementation by providing setup_kuap() and allow/prevent_user_access(). Some platforms will need to know the area accessed and whether it is accessed from read, write or both. Therefore source, destination and size and handed over to the two functions. mpe: Rename to allow/prevent rather than unlock/lock, and add read/write wrappers. Drop the 32-bit code for now until we have an implementation for it. Add kuap to pt_regs for 64-bit as well as 32-bit. Don't split strings, use pr_crit_ratelimited(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-04-20powerpc: Remove duplicate headersJagadeesh Pagadala
Remove duplicate headers inclusions. Signed-off-by: Jagadeesh Pagadala <jagdsh.linux@gmail.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-25powerpc/64: Fix memcmp reading past the end of src/destMichael Ellerman
Chandan reported that fstests' generic/026 test hit a crash: BUG: Unable to handle kernel data access at 0xc00000062ac40000 Faulting instruction address: 0xc000000000092240 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 DEBUG_PAGEALLOC NUMA pSeries CPU: 0 PID: 27828 Comm: chacl Not tainted 5.0.0-rc2-next-20190115-00001-g6de6dba64dda #1 NIP: c000000000092240 LR: c00000000066a55c CTR: 0000000000000000 REGS: c00000062c0c3430 TRAP: 0300 Not tainted (5.0.0-rc2-next-20190115-00001-g6de6dba64dda) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 44000842 XER: 20000000 CFAR: 00007fff7f3108ac DAR: c00000062ac40000 DSISR: 40000000 IRQMASK: 0 GPR00: 0000000000000000 c00000062c0c36c0 c0000000017f4c00 c00000000121a660 GPR04: c00000062ac3fff9 0000000000000004 0000000000000020 00000000275b19c4 GPR08: 000000000000000c 46494c4500000000 5347495f41434c5f c0000000026073a0 GPR12: 0000000000000000 c0000000027a0000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: c00000062ea70020 c00000062c0c38d0 0000000000000002 0000000000000002 GPR24: c00000062ac3ffe8 00000000275b19c4 0000000000000001 c00000062ac30000 GPR28: c00000062c0c38d0 c00000062ac30050 c00000062ac30058 0000000000000000 NIP memcmp+0x120/0x690 LR xfs_attr3_leaf_lookup_int+0x53c/0x5b0 Call Trace: xfs_attr3_leaf_lookup_int+0x78/0x5b0 (unreliable) xfs_da3_node_lookup_int+0x32c/0x5a0 xfs_attr_node_addname+0x170/0x6b0 xfs_attr_set+0x2ac/0x340 __xfs_set_acl+0xf0/0x230 xfs_set_acl+0xd0/0x160 set_posix_acl+0xc0/0x130 posix_acl_xattr_set+0x68/0x110 __vfs_setxattr+0xa4/0x110 __vfs_setxattr_noperm+0xac/0x240 vfs_setxattr+0x128/0x130 setxattr+0x248/0x600 path_setxattr+0x108/0x120 sys_setxattr+0x28/0x40 system_call+0x5c/0x70 Instruction dump: 7d201c28 7d402428 7c295040 38630008 38840008 408201f0 4200ffe8 2c050000 4182ff6c 20c50008 54c61838 7d201c28 <7d402428> 7d293436 7d4a3436 7c295040 The instruction dump decodes as: subfic r6,r5,8 rlwinm r6,r6,3,0,28 ldbrx r9,0,r3 ldbrx r10,0,r4 <- Which shows us doing an 8 byte load from c00000062ac3fff9, which crosses the page boundary at c00000062ac40000 and faults. It's not OK for memcmp to read past the end of the source or destination buffers if that would cross a page boundary, because we don't know that the next page is mapped. As pointed out by Segher, we can read past the end of the source or destination as long as we don't cross a 4K boundary, because that's our minimum page size on all platforms. The bug is in the code at the .Lcmp_rest_lt8bytes label. When we get there we know that s1 is 8-byte aligned and we have at least 1 byte to read, so a single 8-byte load won't read past the end of s1 and cross a page boundary. But we have to be more careful with s2. So check if it's within 8 bytes of a 4K boundary and if so go to the byte-by-byte loop. Fixes: 2d9ee327adce ("powerpc/64: Align bytes before fall back to .Lshort in powerpc64 memcmp()") Cc: stable@vger.kernel.org # v4.19+ Reported-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org> Tested-by: Chandan Rajendra <chandan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-12treewide: add checks for the return value of memblock_alloc*()Mike Rapoport
Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky] Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Reviewed-by: Juergen Gross <jgross@suse.com> [Xen] Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Christoph Hellwig <hch@lst.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dennis Zhou <dennis@kernel.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Mark Salter <msalter@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Petr Mladek <pmladek@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-02-26powerpc sstep: Add support for modsd, modud instructionsSandipan Das
This adds emulation support for the following integer instructions: * Modulo Signed Doubleword (modsd) * Modulo Unsigned Doubleword (modud) Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc sstep: Add support for modsw, moduw instructionsPrasannaKumar Muralidharan
This adds emulation support for the following integer instructions: * Modulo Signed Word (modsw) * Modulo Unsigned Word (moduw) Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc sstep: Add support for extswsli instructionSandipan Das
This adds emulation support for the following integer instructions: * Extend-Sign Word and Shift Left Immediate (extswsli[.]) Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc sstep: Add support for cnttzw, cnttzd instructionsSandipan Das
This adds emulation support for the following integer instructions: * Count Trailing Zeros Word (cnttzw[.]) * Count Trailing Zeros Doubleword (cnttzd[.]) Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc: sstep: Add support for darn instructionSandipan Das
This adds emulation support for the following integer instructions: * Deliver A Random Number (darn) As suggested by Michael, this uses a raw .long for specifying the instruction word when using inline assembly to retain compatibility with older binutils. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-26powerpc: sstep: Add support for maddhd, maddhdu, maddld instructionsSandipan Das
This adds emulation support for the following integer instructions: * Multiply-Add High Doubleword (maddhd) * Multiply-Add High Doubleword Unsigned (maddhdu) * Multiply-Add Low Doubleword (maddld) As suggested by Michael, this uses a raw .long for specifying the instruction word when using inline assembly to retain compatibility with older binutils. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: sstep: Add tests for addc[.] instructionSandipan Das
This adds test cases for the addc[.] instruction. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: sstep: Add tests for add[.] instructionSandipan Das
This adds test cases for the add[.] instruction. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-02-23powerpc: sstep: Add tests for compute type instructionsSandipan Das
This enhances the current selftest framework for validating the in-kernel instruction emulation infrastructure by adding support for compute type instructions i.e. integer ALU-based instructions. Originally, this framework was limited to only testing load and store instructions. While most of the GPRs can be validated, support for SPRs is limited to LR, CR and XER for now. When writing the test cases, one must ensure that the Stack Pointer (GPR1) or the Thread Pointer (GPR13) are not touched by any means as these are vital non-volatile registers. Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> [mpe: Use patch_site for the code patching] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-20powerpc/fsl: Add infrastructure to fixup branch predictor flushDiana Craciun
In order to protect against speculation attacks (Spectre variant 2) on NXP PowerPC platforms, the branch predictor should be flushed when the privillege level is changed. This patch is adding the infrastructure to fixup at runtime the code sections that are performing the branch predictor flush depending on a boot arg parameter which is added later in a separate patch. Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-19powerpc: simplify patch_instruction_site() and patch_branch_site()Christophe Leroy
Using patch_site_addr() helper, patch_instruction_site() and patch_branch_site() can be simplified and inlined. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-25powerpc/lib: Declare static methodsBreno Leitao
Functions do_stf_{entry,exit}_barrier_fixups are static but not declared as such. This was detected by `sparse` tool with the following warning: arch/powerpc/lib/feature-fixups.c:121:6: warning: symbol 'do_stf_entry_barrier_fixups' was not declared. Should it be static? arch/powerpc/lib/feature-fixups.c:171:6: warning: symbol 'do_stf_exit_barrier_fixups' was not declared. Should it be static? This patch declares both functions as static, as they are only called by do_stf_barrier_fixups(), which is in the same source code file. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31memblock: stop using implicit alignment to SMP_CACHE_BYTESMike Rapoport
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-20powerpc: Add support for function error injectionNaveen N. Rao
We implement regs_set_return_value() and override_function_with_return() for this purpose. On powerpc, a return from a function (blr) just branches to the location contained in the link register. So, we can just update pt_regs rather than redirecting execution to a dummy function that returns. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-19powerpc: Add -Werror at arch/powerpc levelMichael Ellerman
Back when I added -Werror in commit ba55bd74360e ("powerpc: Add configurable -Werror for arch/powerpc") I did it by adding it to most of the arch Makefiles. At the time we excluded math-emu, because apparently it didn't build cleanly. But that seems to have been fixed somewhere in the interim. So move the -Werror addition to the top-level of the arch, this saves us from repeating it in every Makefile and means we won't forget to add it to any new sub-dirs. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-14powerpc: handover page flags with a pgprot_t parameterChristophe Leroy
In order to avoid multiple conversions, handover directly a pgprot_t to map_kernel_page() as already done for radix. Do the same for __ioremap_caller() and __ioremap_at(). Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-09Merge branch 'fixes' into nextMichael Ellerman
Merge our fixes branch. It has a few important fixes that are needed for futher testing and also some commits that will conflict with content in next.
2018-10-02powerpc/lib: fix book3s/32 boot failure due to code patchingChristophe Leroy
Commit 51c3c62b58b3 ("powerpc: Avoid code patching freed init sections") accesses 'init_mem_is_free' flag too early, before the kernel is relocated. This provokes early boot failure (before the console is active). As it is not necessary to do this verification that early, this patch moves the test into patch_instruction() instead of __patch_instruction(). This modification also has the advantage of avoiding unnecessary remappings. Fixes: 51c3c62b58b3 ("powerpc: Avoid code patching freed init sections") Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-20powerpc: fix csum_ipv6_magic() on little endian platformsChristophe Leroy
On little endian platforms, csum_ipv6_magic() keeps len and proto in CPU byte order. This generates a bad results leading to ICMPv6 packets from other hosts being dropped by powerpc64le platforms. In order to fix this, len and proto should be converted to network byte order ie bigendian byte order. However checksumming 0x12345678 and 0x56341278 provide the exact same result so it is enough to rotate the sum of len and proto by 1 byte. PPC32 only support bigendian so the fix is needed for PPC64 only Fixes: e9c4943a107b ("powerpc: Implement csum_ipv6_magic in assembly") Reported-by: Jianlin Shi <jishi@redhat.com> Reported-by: Xin Long <lucien.xin@gmail.com> Cc: <stable@vger.kernel.org> # 4.18+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-18powerpc: Avoid code patching freed init sectionsMichael Neuling
This stops us from doing code patching in init sections after they've been freed. In this chain: kvm_guest_init() -> kvm_use_magic_page() -> fault_in_pages_readable() -> __get_user() -> __get_user_nocheck() -> barrier_nospec(); We have a code patching location at barrier_nospec() and kvm_guest_init() is an init function. This whole chain gets inlined, so when we free the init section (hence kvm_guest_init()), this code goes away and hence should no longer be patched. We seen this as userspace memory corruption when using a memory checker while doing partition migration testing on powervm (this starts the code patching post migration via /sys/kernel/mobility/migration). In theory, it could also happen when using /sys/kernel/debug/powerpc/barrier_nospec. Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Michael Neuling <mikey@neuling.org> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-09-17powerpc/64: Remove static branch hints from memset()Anton Blanchard
Static branch hints override dynamic branch prediction on recent POWER CPUs. We should only use them when we are overwhelmingly sure of the direction. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-10powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabledChristophe Leroy
The symbol memcpy_nocache_branch defined in order to allow patching of memset function once cache is enabled leads to confusing reports by perf tool. Using the new patch_site functionality solves this issue. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08powerpc/64: Copy as much as possible in __copy_tofrom_userPaul Mackerras
In __copy_tofrom_user, if we encounter an exception on a store, we stop copying and return the number of bytes not copied. However, if the store is wider than one byte and is to an unaligned address, it is possible that the store operand overlaps a page boundary and the exception occurred on the latter part of the store operand, meaning that it would be possible to copy a few more bytes. Since copy_to_user is generally expected to copy as much as possible, it would be better to copy those extra few bytes. This adds code to do that. Since this edge case is not performance-critical, the code has been written to be compact rather than as fast as possible. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08selftests/powerpc/64: Test all paths through copy routinesPaul Mackerras
The hand-coded assembler 64-bit copy routines include feature sections that select one code path or another depending on which CPU we are executing on. The self-tests for these copy routines end up testing just one path. This adds a mechanism for selecting any desired code path at compile time, and makes 2 or 3 versions of each test, each using a different code path, so as to cover all the possible paths. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> [mpe: Add -mcpu=power4 to CFLAGS for older compilers] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08powerpc/64: Make exception table clearer in __copy_tofrom_user_basePaul Mackerras
This aims to make the generation of exception table entries for the loads and stores in __copy_tofrom_user_base clearer and easier to verify. Instead of having a series of local labels on the loads and stores, with a series of corresponding labels later for the exception handlers, we now use macros to generate exception table entries at the point of each load and store that could potentially trap. We do this with the macros lex (load exception) and stex (store exception). These macros are used right before the load or store to which they apply. Some complexity is introduced by the fact that we have some more work to do after hitting an exception, because we need to calculate and return the number of bytes not copied. The code uses r3 as the current pointer into the destination buffer, that is, the address of the first byte of the destination that has not been modified. However, at various points in the copy loops, r3 can be 4, 8, 16 or 24 bytes behind that point. To express this offset in an understandable way, we define a symbol r3_offset which is updated at various points so that it equal to the difference between the address of the first unmodified byte of the destination and the value in r3. (In fact it only needs to be accurate at the point of each lex or stex macro invocation.) The rules for updating r3_offset are as follows: * It starts out at 0 * An addi r3,r3,N instruction decreases r3_offset by N * A store instruction (stb, sth, stw, std) to N(r3) increases r3_offset by the width of the store (1, 2, 4, 8) * A store with update instruction (stbu, sthu, stwu, stdu) to N(r3) sets r3_offset to the width of the store. There is some trickiness to the way that the lex and stex macros and the associated exception handlers work. I would have liked to use the current value of r3_offset in the name of the symbol used as the exception handler, as in ".Lld_exc_$(r3_offset)" and then have symbols .Lld_exc_0, .Lld_exc_8, .Lld_exc_16 etc. corresponding to the offsets that needed to be added to r3. However, I couldn't see a way to do that with gas. Instead, the exception handler address is .Lld_exc - r3_offset or .Lst_exc - r3_offset, that is, the distance ahead of .Lld_exc/.Lst_exc that we start executing is equal to the amount that we need to add to r3. This works because r3_offset is always a small multiple of 4, and our instructions are 4 bytes long. This means that before .Lld_exc and .Lst_exc, we have a sequence of instructions that increments r3 by 4, 8, 16 or 24 depending on where we start. The sequence increments r3 by 4 per instruction (on average). We also replace the exception table for the 4k copy loop by a macro per load or store. These loads and stores all use exactly the same exception handler, which simply resets the argument registers r3, r4 and r5 to there original values and re-does the whole copy using the slower loop. Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08powerpc/asm: Add a patch_site macro & helpers for patching instructionsMichael Ellerman
Add a macro and some helper C functions for patching single asm instructions. The gas macro means we can do something like: 1: nop patch_site 1b, patch__foo Which is less visually distracting than defining a GLOBAL symbol at 1, and also doesn't pollute the symbol table which can confuse eg. perf. These are obviously similar to our existing feature sections, but are not automatically patched based on CPU/MMU features, rather they are designed to be manually patched by C code at some arbitrary point. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08powerpc/fsl: Add barrier_nospec implementation for NXP PowerPC Book3EDiana Craciun
Implement the barrier_nospec as a isync;sync instruction sequence. The implementation uses the infrastructure built for BOOK3S 64. Signed-off-by: Diana Craciun <diana.craciun@nxp.com> [mpe: Split out of larger patch] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08powerpc/64: Add CONFIG_PPC_BARRIER_NOSPECMichael Ellerman
Add a config symbol to encode which platforms support the barrier_nospec speculation barrier. Currently this is just Book3S 64 but we will add Book3E in a future patch. Signed-off-by: Diana Craciun <diana.craciun@nxp.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-07powerpc/lib: Implement strlen() in assembly for PPC32Christophe Leroy
The generic implementation of strlen() reads strings byte per byte. This patch implements strlen() in assembly based on a read of entire words, in the same spirit as what some other arches and glibc do. On a 8xx the time spent in strlen is reduced by 3/4 for long strings. strlen() selftest on an 8xx provides the following values: Before the patch (ie with the generic strlen() in lib/string.c): len 256 : time = 1.195055 len 016 : time = 0.083745 len 008 : time = 0.046828 len 004 : time = 0.028390 After the patch: len 256 : time = 0.272185 ==> 78% improvment len 016 : time = 0.040632 ==> 51% improvment len 008 : time = 0.033060 ==> 29% improvment len 004 : time = 0.029149 ==> 2% degradation On a 832x: Before the patch: len 256 : time = 0.236125 len 016 : time = 0.018136 len 008 : time = 0.011000 len 004 : time = 0.007229 After the patch: len 256 : time = 0.094950 ==> 60% improvment len 016 : time = 0.013357 ==> 26% improvment len 008 : time = 0.010586 ==> 4% improvment len 004 : time = 0.008784 Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>