summaryrefslogtreecommitdiff
path: root/arch/powerpc/kvm
AgeCommit message (Collapse)Author
2020-07-10powerpc64: Break asm/percpu.h vs spinlock_types.h dependencyPeter Zijlstra
In order to use <asm/percpu.h> in lockdep.h, we need to make sure asm/percpu.h does not itself depend on lockdep. The below seems to make that so and builds powerpc64-defconfig + PROVE_LOCKING. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> https://lkml.kernel.org/r/20200623083721.336906073@infradead.org
2020-06-22powerpc/kvm/book3s64: Fix kernel crash with nested kvm & DEBUG_VIRTUALAneesh Kumar K.V
With CONFIG_DEBUG_VIRTUAL=y, __pa() checks for addr value and if it's less than PAGE_OFFSET it leads to a BUG(). #define __pa(x) ({ VIRTUAL_BUG_ON((unsigned long)(x) < PAGE_OFFSET); (unsigned long)(x) & 0x0fffffffffffffffUL; }) kernel BUG at arch/powerpc/kvm/book3s_64_mmu_radix.c:43! cpu 0x70: Vector: 700 (Program Check) at [c0000018a2187360] pc: c000000000161b30: __kvmhv_copy_tofrom_guest_radix+0x130/0x1f0 lr: c000000000161d5c: kvmhv_copy_from_guest_radix+0x3c/0x80 ... kvmhv_copy_from_guest_radix+0x3c/0x80 kvmhv_load_from_eaddr+0x48/0xc0 kvmppc_ld+0x98/0x1e0 kvmppc_load_last_inst+0x50/0x90 kvmppc_hv_emulate_mmio+0x288/0x2b0 kvmppc_book3s_radix_page_fault+0xd8/0x2b0 kvmppc_book3s_hv_page_fault+0x37c/0x1050 kvmppc_vcpu_run_hv+0xbb8/0x1080 kvmppc_vcpu_run+0x34/0x50 kvm_arch_vcpu_ioctl_run+0x2fc/0x410 kvm_vcpu_ioctl+0x2b4/0x8f0 ksys_ioctl+0xf4/0x150 sys_ioctl+0x28/0x80 system_call_exception+0x104/0x1d0 system_call_common+0xe8/0x214 kvmhv_copy_tofrom_guest_radix() uses a NULL value for to/from to indicate direction of copy. Avoid calling __pa() if the value is NULL to avoid the BUG(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [mpe: Massage change log a bit to mention CONFIG_DEBUG_VIRTUAL] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611120159.680284-1-aneesh.kumar@linux.ibm.com
2020-06-17maccess: rename probe_user_{read,write} to copy_{from,to}_user_nofaultChristoph Hellwig
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-13Merge tag 'powerpc-5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a recent change which broke nested KVM guests on Power9. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Fix nested guest RC bits update
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull more KVM updates from Paolo Bonzini: "The guest side of the asynchronous page fault work has been delayed to 5.9 in order to sync with Thomas's interrupt entry rework, but here's the rest of the KVM updates for this merge window. MIPS: - Loongson port PPC: - Fixes ARM: - Fixes x86: - KVM_SET_USER_MEMORY_REGION optimizations - Fixes - Selftest fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits) KVM: x86: do not pass poisoned hva to __kvm_set_memory_region KVM: selftests: fix sync_with_host() in smm_test KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected KVM: async_pf: Cleanup kvm_setup_async_pf() kvm: i8254: remove redundant assignment to pointer s KVM: x86: respect singlestep when emulating instruction KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check KVM: nVMX: Consult only the "basic" exit reason when routing nested exit KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts KVM: arm64: Remove host_cpu_context member from vcpu structure KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr KVM: arm64: Handle PtrAuth traps early KVM: x86: Unexport x86_fpu_cache and make it static KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K KVM: arm64: Save the host's PtrAuth keys in non-preemptible context KVM: arm64: Stop save/restoring ACTLR_EL1 KVM: arm64: Add emulation for 32bit guests accessing ACTLR2 ...
2020-06-12KVM: PPC: Fix nested guest RC bits updateAlexey Kardashevskiy
Before commit 6cdf30375f82 ("powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table") we called __find_linux_pte() with a page table pointer from a kvm_nested_guest struct but now we rely on kvmhv_find_nested() which takes an L1 LPID and returns a kvm_nested_guest pointer, however we pass a L0 LPID there and the L2 guest hangs. This fixes the LPID passed to kvmppc_hv_handle_set_rc(). Fixes: 6cdf30375f82 ("powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary table") Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200611030559.75257-1-aik@ozlabs.ru
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-08mm/gup.c: convert to use get_user_{page|pages}_fast_only()Souptick Joarder
API __get_user_pages_fast() renamed to get_user_pages_fast_only() to align with pin_user_pages_fast_only(). As part of this we will get rid of write parameter. Instead caller will pass FOLL_WRITE to get_user_pages_fast_only(). This will not change any existing functionality of the API. All the callers are changed to pass FOLL_WRITE. Also introduce get_user_page_fast_only(), and use it in a few places that hard-code nr_pages to 1. Updated the documentation of the API. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> [arch/powerpc/kvm] Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Michal Suchanek <msuchanek@suse.de> Link: http://lkml.kernel.org/r/1590396812-31277-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-05Merge tag 'powerpc-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Support for userspace to send requests directly to the on-chip GZIP accelerator on Power9. - Rework of our lockless page table walking (__find_linux_pte()) to make it safe against parallel page table manipulations without relying on an IPI for serialisation. - A series of fixes & enhancements to make our machine check handling more robust. - Lots of plumbing to add support for "prefixed" (64-bit) instructions on Power10. - Support for using huge pages for the linear mapping on 8xx (32-bit). - Remove obsolete Xilinx PPC405/PPC440 support, and an associated sound driver. - Removal of some obsolete 40x platforms and associated cruft. - Initial support for booting on Power10. - Lots of other small features, cleanups & fixes. Thanks to: Alexey Kardashevskiy, Alistair Popple, Andrew Donnellan, Andrey Abramov, Aneesh Kumar K.V, Balamuruhan S, Bharata B Rao, Bulent Abali, Cédric Le Goater, Chen Zhou, Christian Zigotzky, Christophe JAILLET, Christophe Leroy, Dmitry Torokhov, Emmanuel Nicolet, Erhard F., Gautham R. Shenoy, Geoff Levand, George Spelvin, Greg Kurz, Gustavo A. R. Silva, Gustavo Walbon, Haren Myneni, Hari Bathini, Joel Stanley, Jordan Niethe, Kajol Jain, Kees Cook, Leonardo Bras, Madhavan Srinivasan., Mahesh Salgaonkar, Markus Elfring, Michael Neuling, Michal Simek, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pingfan Liu, Qian Cai, Ram Pai, Raphael Moreira Zinsly, Ravi Bangoria, Sam Bobroff, Sandipan Das, Segher Boessenkool, Stephen Rothwell, Sukadev Bhattiprolu, Tyrel Datwyler, Wolfram Sang, Xiongfeng Wang. * tag 'powerpc-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (299 commits) powerpc/pseries: Make vio and ibmebus initcalls pseries specific cxl: Remove dead Kconfig options powerpc: Add POWER10 architected mode powerpc/dt_cpu_ftrs: Add MMA feature powerpc/dt_cpu_ftrs: Enable Prefixed Instructions powerpc/dt_cpu_ftrs: Advertise support for ISA v3.1 if selected powerpc: Add support for ISA v3.1 powerpc: Add new HWCAP bits powerpc/64s: Don't set FSCR bits in INIT_THREAD powerpc/64s: Save FSCR to init_task.thread.fscr after feature init powerpc/64s: Don't let DT CPU features set FSCR_DSCR powerpc/64s: Don't init FSCR_DSCR in __init_FSCR() powerpc/32s: Fix another build failure with CONFIG_PPC_KUAP_DEBUG powerpc/module_64: Use special stub for _mcount() with -mprofile-kernel powerpc/module_64: Simplify check for -mprofile-kernel ftrace relocations powerpc/module_64: Consolidate ftrace code powerpc/32: Disable KASAN with pages bigger than 16k powerpc/uaccess: Don't set KUEP by default on book3s/32 powerpc/uaccess: Don't set KUAP by default on book3s/32 powerpc/8xx: Reduce time spent in allow_user_access() and friends ...
2020-06-04powerpc: add support for folded p4d page tablesMike Rapoport
Implement primitives necessary for the 4th level folding, add walks of p4d level where appropriate and replace 5level-fixup.h with pgtable-nop4d.h. [rppt@linux.ibm.com: powerpc/xmon: drop unused pgdir varialble in show_pte() function] Link: http://lkml.kernel.org/r/20200519181454.GI1059226@linux.ibm.com [rppt@linux.ibm.com; build fix] Link: http://lkml.kernel.org/r/20200423141845.GI13521@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> # 8xx and 83xx Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: James Morse <james.morse@arm.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Julien Thierry <julien.thierry.kdev@gmail.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200414153455.21744-9-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-03Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge one more commit from the topic branch we shared with the kvm-ppc tree. This brings in a fix to the code that scans for dirty pages during migration of a VM, which was incorrectly triggering a warning.
2020-06-02powerpc: Add support for ISA v3.1Alistair Popple
Newer ISA versions are enabled by clearing all bits in the PCR associated with previous versions of the ISA. Enable ISA v3.1 support by updating the PCR mask to include ISA v3.0. This ensures all PCR bits corresponding to earlier architecture versions get cleared thereby enabling ISA v3.1 if supported by the hardware. Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200521014341.29095-3-alistair@popple.id.au
2020-05-29powerpc/book3s64/kvm: Fix secondary page table walk warning during migrationAneesh Kumar K.V
This patch fixes the below warning reported during migration: find_kvm_secondary_pte called with kvm mmu_lock not held CPU: 23 PID: 5341 Comm: qemu-system-ppc Tainted: G W 5.7.0-rc5-kvm-00211-g9ccf10d6d088 #432 NIP: c008000000fe848c LR: c008000000fe8488 CTR: 0000000000000000 REGS: c000001e19f077e0 TRAP: 0700 Tainted: G W (5.7.0-rc5-kvm-00211-g9ccf10d6d088) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 42222422 XER: 20040000 CFAR: c00000000012f5ac IRQMASK: 0 GPR00: c008000000fe8488 c000001e19f07a70 c008000000ffe200 0000000000000039 GPR04: 0000000000000001 c000001ffc8b4900 0000000000018840 0000000000000007 GPR08: 0000000000000003 0000000000000001 0000000000000007 0000000000000001 GPR12: 0000000000002000 c000001fff6d9400 000000011f884678 00007fff70b70000 GPR16: 00007fff7137cb90 00007fff7dcb4410 0000000000000001 0000000000000000 GPR20: 000000000ffe0000 0000000000000000 0000000000000001 0000000000000000 GPR24: 8000000000000000 0000000000000001 c000001e1f67e600 c000001e1fd82410 GPR28: 0000000000001000 c000001e2e410000 0000000000000fff 0000000000000ffe NIP [c008000000fe848c] kvmppc_hv_get_dirty_log_radix+0x2e4/0x340 [kvm_hv] LR [c008000000fe8488] kvmppc_hv_get_dirty_log_radix+0x2e0/0x340 [kvm_hv] Call Trace: [c000001e19f07a70] [c008000000fe8488] kvmppc_hv_get_dirty_log_radix+0x2e0/0x340 [kvm_hv] (unreliable) [c000001e19f07b50] [c008000000fd42e4] kvm_vm_ioctl_get_dirty_log_hv+0x33c/0x3c0 [kvm_hv] [c000001e19f07be0] [c008000000eea878] kvm_vm_ioctl_get_dirty_log+0x30/0x50 [kvm] [c000001e19f07c00] [c008000000edc818] kvm_vm_ioctl+0x2b0/0xc00 [kvm] [c000001e19f07d50] [c00000000046e148] ksys_ioctl+0xf8/0x150 [c000001e19f07da0] [c00000000046e1c8] sys_ioctl+0x28/0x80 [c000001e19f07dc0] [c00000000003652c] system_call_exception+0x16c/0x240 [c000001e19f07e20] [c00000000000d070] system_call_common+0xf0/0x278 Instruction dump: 7d3a512a 4200ffd0 7ffefb78 4bfffdc4 60000000 3c820000 e8848468 3c620000 e86384a8 38840010 4800673d e8410018 <0fe00000> 4bfffdd4 60000000 60000000 Reported-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200528080456.87797-1-aneesh.kumar@linux.ibm.com
2020-05-28KVM: PPC: Book3S HV: Close race with page faults around memslot flushesPaul Mackerras
There is a potential race condition between hypervisor page faults and flushing a memslot. It is possible for a page fault to read the memslot before a memslot is updated and then write a PTE to the partition-scoped page tables after kvmppc_radix_flush_memslot has completed. (Note that this race has never been explicitly observed.) To close this race, it is sufficient to increment the MMU sequence number while the kvm->mmu_lock is held. That will cause mmu_notifier_retry() to return true, and the page fault will then return to the guest without inserting a PTE. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-28KVM: PPC: Book3S HV: Remove user-triggerable WARN_ONPaul Mackerras
Although in general we do not expect valid PTEs to be found in kvmppc_create_pte when we are inserting a large page mapping, there is one situation where this can occur. That is when dirty page logging is turned off for a memslot while the VM is running. Because the new memslots are installed before the old memslot is flushed in kvmppc_core_commit_memory_region_hv(), there is a window where a hypervisor page fault can try to install a 2MB (or 1GB) page where there are already small page mappings which were installed while dirty page logging was enabled and which have not yet been flushed. Since we have a situation where valid PTEs can legitimately be found by kvmppc_unmap_free_pte, and which can be triggered by userspace, just remove the WARN_ON_ONCE, since it is undesirable to have userspace able to trigger a kernel warning. Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Book3S HV: Relax check on H_SVM_INIT_ABORTLaurent Dufour
The commit 8c47b6ff29e3 ("KVM: PPC: Book3S HV: Check caller of H_SVM_* Hcalls") added checks of secure bit of SRR1 to filter out the Hcall reserved to the Ultravisor. However, the Hcall H_SVM_INIT_ABORT is made by the Ultravisor passing the context of the VM calling UV_ESM. This allows the Hypervisor to return to the guest without going through the Ultravisor. Thus the Secure bit of SRR1 is not set in that particular case. In the case a regular VM is calling H_SVM_INIT_ABORT, this hcall will be filtered out in kvmppc_h_svm_init_abort() because kvm->arch.secure_guest is not set in that case. Fixes: 8c47b6ff29e3 ("KVM: PPC: Book3S HV: Check caller of H_SVM_* Hcalls") Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Book3S: Fix some RCU-list locksQian Cai
It is unsafe to traverse kvm->arch.spapr_tce_tables and stt->iommu_tables without the RCU read lock held. Also, add cond_resched_rcu() in places with the RCU read lock held that could take a while to finish. arch/powerpc/kvm/book3s_64_vio.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by qemu-kvm/4265. stack backtrace: CPU: 96 PID: 4265 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-20200508+ #2 Call Trace: [c000201a8690f720] [c000000000715948] dump_stack+0xfc/0x174 (unreliable) [c000201a8690f770] [c0000000001d9470] lockdep_rcu_suspicious+0x140/0x164 [c000201a8690f7f0] [c008000010b9fb48] kvm_spapr_tce_release_iommu_group+0x1f0/0x220 [kvm] [c000201a8690f870] [c008000010b8462c] kvm_spapr_tce_release_vfio_group+0x54/0xb0 [kvm] [c000201a8690f8a0] [c008000010b84710] kvm_vfio_destroy+0x88/0x140 [kvm] [c000201a8690f8f0] [c008000010b7d488] kvm_put_kvm+0x370/0x600 [kvm] [c000201a8690f990] [c008000010b7e3c0] kvm_vm_release+0x38/0x60 [kvm] [c000201a8690f9c0] [c0000000005223f4] __fput+0x124/0x330 [c000201a8690fa20] [c000000000151cd8] task_work_run+0xb8/0x130 [c000201a8690fa70] [c0000000001197e8] do_exit+0x4e8/0xfa0 [c000201a8690fb70] [c00000000011a374] do_group_exit+0x64/0xd0 [c000201a8690fbb0] [c000000000132c90] get_signal+0x1f0/0x1200 [c000201a8690fcc0] [c000000000020690] do_notify_resume+0x130/0x3c0 [c000201a8690fda0] [c000000000038d64] syscall_exit_prepare+0x1a4/0x280 [c000201a8690fe20] [c00000000000c8f8] system_call_common+0xf8/0x278 ==== arch/powerpc/kvm/book3s_64_vio.c:368 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by qemu-kvm/4264: #0: c000201ae2d000d8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm] #1: c000200c9ed0c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:108 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] ==== arch/powerpc/kvm/book3s_64_vio.c:146 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by qemu-kvm/4257: #0: c000200b1b363a40 (&kv->lock){+.+.}-{3:3}, at: kvm_vfio_set_attr+0x598/0x6c0 [kvm] Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Book3S HV: Ignore kmemleak false positivesQian Cai
kvmppc_pmd_alloc() and kvmppc_pte_alloc() allocate some memory but then pud_populate() and pmd_populate() will use __pa() to reference the newly allocated memory. Since kmemleak is unable to track the physical memory resulting in false positives, silence those by using kmemleak_ignore(). unreferenced object 0xc000201c382a1000 (size 4096): comm "qemu-kvm", pid 124828, jiffies 4295733767 (age 341.250s) hex dump (first 32 bytes): c0 00 20 09 f4 60 03 87 c0 00 20 10 72 a0 03 87 .. ..`.... .r... c0 00 20 0e 13 a0 03 87 c0 00 20 1b dc c0 03 87 .. ....... ..... backtrace: [<000000004cc2790f>] kvmppc_create_pte+0x838/0xd20 [kvm_hv] kvmppc_pmd_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:366 (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:590 [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv] [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv] [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv] [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv] [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm] [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm] [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm] [<0000000048155cd6>] ksys_ioctl+0xd8/0x130 [<0000000041ffeaa7>] sys_ioctl+0x28/0x40 [<000000004afc4310>] system_call_exception+0x114/0x1e0 [<00000000fb70a873>] system_call_common+0xf0/0x278 unreferenced object 0xc0002001f0c03900 (size 256): comm "qemu-kvm", pid 124830, jiffies 4295735235 (age 326.570s) hex dump (first 32 bytes): c0 00 20 10 fa a0 03 87 c0 00 20 10 fa a1 03 87 .. ....... ..... c0 00 20 10 fa a2 03 87 c0 00 20 10 fa a3 03 87 .. ....... ..... backtrace: [<0000000023f675b8>] kvmppc_create_pte+0x854/0xd20 [kvm_hv] kvmppc_pte_alloc at arch/powerpc/kvm/book3s_64_mmu_radix.c:356 (inlined by) kvmppc_create_pte at arch/powerpc/kvm/book3s_64_mmu_radix.c:593 [<00000000d123c49a>] kvmppc_book3s_instantiate_page+0x2e0/0x8c0 [kvm_hv] [<00000000bb549087>] kvmppc_book3s_radix_page_fault+0x1b4/0x2b0 [kvm_hv] [<0000000086dddc0e>] kvmppc_book3s_hv_page_fault+0x214/0x12a0 [kvm_hv] [<000000005ae9ccc2>] kvmppc_vcpu_run_hv+0xc5c/0x15f0 [kvm_hv] [<00000000d22162ff>] kvmppc_vcpu_run+0x34/0x48 [kvm] [<00000000d6953bc4>] kvm_arch_vcpu_ioctl_run+0x314/0x420 [kvm] [<000000002543dd54>] kvm_vcpu_ioctl+0x33c/0x950 [kvm] [<0000000048155cd6>] ksys_ioctl+0xd8/0x130 [<0000000041ffeaa7>] sys_ioctl+0x28/0x40 [<000000004afc4310>] system_call_exception+0x114/0x1e0 [<00000000fb70a873>] system_call_common+0xf0/0x278 Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Clean up redundant 'kvm_run' parametersTianjia Zhang
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Remove redundant kvm_run from vcpu_archTianjia Zhang
The 'kvm_run' field already exists in the 'vcpu' structure, which is the same structure as the 'kvm_run' in the 'vcpu_arch' and should be deleted. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Book3S HV: Read ibm,secure-memory nodesLaurent Dufour
The newly introduced ibm,secure-memory nodes supersede the ibm,uv-firmware's property secure-memory-ranges. Firmware will no more expose the secure-memory-ranges property so first read the new one and if not found rollback to the older one. Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-27KVM: PPC: Book3S HV: Remove redundant NULL checkChen Zhou
Free function kfree() already does NULL check, so the additional check is unnecessary, just remove it. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2020-05-20Merge branch 'topic/ppc-kvm' into nextMichael Ellerman
Merge our topic branch shared with the kvm-ppc tree. This brings in one commit that touches the XIVE interrupt controller logic across core and KVM code.
2020-05-19powerpc/watchpoint: Rename current DAWR macrosRavi Bangoria
Power10 is introducing second DAWR. Use real register names from ISA for current macros: s/SPRN_DAWR/SPRN_DAWR0/ s/SPRN_DAWRX/SPRN_DAWRX0/ Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Michael Neuling <mikey@neuling.org> Link: https://lore.kernel.org/r/20200514111741.97993-2-ravi.bangoria@linux.ibm.com
2020-05-19powerpc: Define new SRR1 bits for a ISA v3.1Jordan Niethe
Add the BOUNDARY SRR1 bit definition for when the cause of an alignment exception is a prefixed instruction that crosses a 64-byte boundary. Add the PREFIXED SRR1 bit definition for exceptions caused by prefixed instructions. Bit 35 of SRR1 is called SRR1_ISI_N_OR_G. This name comes from it being used to indicate that an ISI was due to the access being no-exec or guarded. ISA v3.1 adds another purpose. It is also set if there is an access in a cache-inhibited location for prefixed instruction. Rename from SRR1_ISI_N_OR_G to SRR1_ISI_N_G_OR_CIP. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Alistair Popple <alistair@popple.id.au> Link: https://lore.kernel.org/r/20200506034050.24806-23-jniethe5@gmail.com
2020-05-19powerpc: Use a macro for creating instructions from u32sJordan Niethe
In preparation for instructions having a more complex data type start using a macro, ppc_inst(), for making an instruction out of a u32. A macro is used so that instructions can be used as initializer elements. Currently this does nothing, but it will allow for creating a data type that can represent prefixed instructions. Signed-off-by: Jordan Niethe <jniethe5@gmail.com> [mpe: Change include guard to _ASM_POWERPC_INST_H] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Alistair Popple <alistair@popple.id.au> Link: https://lore.kernel.org/r/20200506034050.24806-7-jniethe5@gmail.com
2020-05-15kvm: add halt-polling cpu usage statsDavid Matlack
Two new stats for exposing halt-polling cpu usage: halt_poll_success_ns halt_poll_fail_ns Thus sum of these 2 stats is the total cpu time spent polling. "success" means the VCPU polled until a virtual interrupt was delivered. "fail" means the VCPU had to schedule out (either because the maximum poll time was reached or it needed to yield the CPU). To avoid touching every arch's kvm_vcpu_stat struct, only update and export halt-polling cpu usage stats if we're on x86. Exporting cpu usage as a u64 and in nanoseconds means we will overflow at ~500 years, which seems reasonably large. Signed-off-by: David Matlack <dmatlack@google.com> Signed-off-by: Jon Cargille <jcargill@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20200508182240.68440-1-jcargill@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-13kvm: Replace vcpu->swait with rcuwaitDavidlohr Bueso
The use of any sort of waitqueue (simple or regular) for wait/waking vcpus has always been an overkill and semantically wrong. Because this is per-vcpu (which is blocked) there is only ever a single waiting vcpu, thus no need for any sort of queue. As such, make use of the rcuwait primitive, with the following considerations: - rcuwait already provides the proper barriers that serialize concurrent waiter and waker. - Task wakeup is done in rcu read critical region, with a stable task pointer. - Because there is no concurrency among waiters, we need not worry about rcuwait_wait_event() calls corrupting the wait->task. As a consequence, this saves the locking done in swait when modifying the queue. This also applies to per-vcore wait for powerpc kvm-hv. The x86 tscdeadline_latency test mentioned in 8577370fb0cb ("KVM: Use simple waitqueue for vcpu->wq") shows that, on avg, latency is reduced by around 15-20% with this change. Cc: Paul Mackerras <paulus@ozlabs.org> Cc: kvmarm@lists.cs.columbia.edu Cc: linux-mips@vger.kernel.org Reviewed-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Message-Id: <20200424054837.5138-6-dave@stgolabs.net> [Avoid extra logic changes. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-13Merge branch 'kvm-amd-fixes' into HEADPaolo Bonzini
2020-05-11powerpc: Replace _ALIGN_UP() by ALIGN()Christophe Leroy
_ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/8a6d7e45f7904c73a0af539642d3962e2a3c7268.1587407777.git.christophe.leroy@c-s.fr
2020-05-07powerpc/xive: Enforce load-after-store ordering when StoreEOI is activeCédric Le Goater
When an interrupt has been handled, the OS notifies the interrupt controller with a EOI sequence. On a POWER9 system using the XIVE interrupt controller, this can be done with a load or a store operation on the ESB interrupt management page of the interrupt. The StoreEOI operation has less latency and improves interrupt handling performance but it was deactivated during the POWER9 DD2.0 timeframe because of ordering issues. We use the LoadEOI today but we plan to reactivate StoreEOI in future architectures. There is usually no need to enforce ordering between ESB load and store operations as they should lead to the same result. E.g. a store trigger and a load EOI can be executed in any order. Assuming the interrupt state is PQ=10, a store trigger followed by a load EOI will return a Q bit. In the reverse order, it will create a new interrupt trigger from HW. In both cases, the handler processing interrupts is notified. In some cases, the XIVE_ESB_SET_PQ_10 load operation is used to disable temporarily the interrupt source (mask/unmask). When the source is reenabled, the OS can detect if interrupts were received while the source was disabled and reinject them. This process needs special care when StoreEOI is activated. The ESB load and store operations should be correctly ordered because a XIVE_ESB_STORE_EOI operation could leave the source enabled if it has not completed before the loads. For those cases, we enforce Load-after-Store ordering with a special load operation offset. To avoid performance impact, this ordering is only enforced when really needed, that is when interrupt sources are temporarily disabled with the XIVE_ESB_SET_PQ_10 load. It should not be needed for other loads. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200220081506.31209-1-clg@kaod.org
2020-05-07KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properlyPeter Xu
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared as supported. My wild guess is that userspaces like QEMU are using "#ifdef KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be wrong because the compilation host may not be the runtime host. The userspace might still want to keep the old "#ifdef" though to not break the guest debug on old kernels. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20200505154750.126300-1-peterx@redhat.com> [Do the same for PPC and s390. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-05powerpc/kvm/book3s: Use find_kvm_host_pte in kvmppc_get_hpaAneesh Kumar K.V
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-19-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: use find_kvm_host_pte in kvmppc_book3s_instantiate_pageAneesh Kumar K.V
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-18-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: Avoid using rmap to protect parallel page table update.Aneesh Kumar K.V
We now depend on kvm->mmu_lock Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-17-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: use find_kvm_host_pte in pute_tce functionsAneesh Kumar K.V
Current code just hold rmap lock to ensure parallel page table update is prevented. That is not sufficient. The kernel should also check whether a mmu_notifer callback was running in parallel. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-16-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: Use find_kvm_host_pte in h_enterAneesh Kumar K.V
Since kvmppc_do_h_enter can get called in realmode use low level arch_spin_lock which is safe to be called in realmode. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-15-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: Use find_kvm_host_pte in page fault handlerAneesh Kumar K.V
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-14-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: Use kvm helpers to walk shadow or secondary tableAneesh Kumar K.V
update kvmppc_hv_handle_set_rc to use find_kvm_nested_guest_pte and find_kvm_secondary_pte Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-12-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/nested: Add helper to walk nested shadow linux page table.Aneesh Kumar K.V
The locking rules for walking nested shadow linux page table is different from process scoped table. Hence add a helper for nested page table walk and also add check whether we are holding the right locks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-11-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: Add helper to walk partition scoped linux page table.Aneesh Kumar K.V
The locking rules for walking partition scoped table is different from process scoped table. Hence add a helper for secondary linux page table walk and also add check whether we are holding the right locks. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-10-aneesh.kumar@linux.ibm.com
2020-05-05powerpc/kvm/book3s: switch from raw_spin_*lock to arch_spin_lock.Aneesh Kumar K.V
These functions can get called in realmode. Hence use low level arch_spin_lock which is safe to be called in realmode. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200505071729.54912-9-aneesh.kumar@linux.ibm.com
2020-05-05Merge tag 'kvm-ppc-fixes-5.7-1' into topic/ppc-kvmMichael Ellerman
This brings in a fix from the kvm-ppc tree that was merged to mainline after rc2, and so isn't in the base of our topic branch. We'd like it in the topic branch because it interacts with patches we plan to carry in this branch.
2020-04-21Merge tag 'kvm-ppc-fixes-5.7-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master PPC KVM fix for 5.7 - Fix a regression introduced in the last merge window, which results in guests in HPT mode dying randomly.
2020-04-21KVM: Remove redundant argument to kvm_arch_vcpu_ioctl_runTianjia Zhang
In earlier versions of kvm, 'kvm_run' was an independent structure and was not included in the vcpu structure. At present, 'kvm_run' is already included in the vcpu structure, so the parameter 'kvm_run' is redundant. This patch simplifies the function definition, removes the extra 'kvm_run' parameter, and extracts it from the 'kvm_vcpu' structure if necessary. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Message-Id: <20200416051057.26526-1-tianjia.zhang@linux.alibaba.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 12:34:25 +0000