summaryrefslogtreecommitdiff
path: root/arch/parisc
AgeCommit message (Collapse)Author
2014-07-18parisc: ftrace: Remove check of obsolete variable function_trace_stopSteven Rostedt (Red Hat)
Nothing sets function_trace_stop to disable function tracing anymore. Remove the check for it in the arch code. Link: http://lkml.kernel.org/r/53B08317.7010501@gmx.de Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-18parisc: ftrace: Add call to ftrace_graph_is_dead() in function graph codeSteven Rostedt (Red Hat)
ftrace_stop() is going away as it disables parts of function tracing that affects users that should not be affected. But ftrace_graph_stop() is built on ftrace_stop(). Here's another example of killing all of function tracing because something went wrong with function graph tracing. Instead of disabling all users of function tracing on function graph error, disable only function graph tracing. To do this, the arch code must call ftrace_graph_is_dead() before it implements function graph. Link: http://lkml.kernel.org/r/53B08317.7010501@gmx.de Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-07-17arch, locking: Ciao arch_mutex_cpu_relax()Davidlohr Bueso
The arch_mutex_cpu_relax() function, introduced by 34b133f, is hacky and ugly. It was added a few years ago to address the fact that common cpu_relax() calls include yielding on s390, and thus impact the optimistic spinning functionality of mutexes. Nowadays we use this function well beyond mutexes: rwsem, qrwlock, mcs and lockref. Since the macro that defines the call is in the mutex header, any users must include mutex.h and the naming is misleading as well. This patch (i) renames the call to cpu_relax_lowlatency ("relax, but only if you can do it with very low latency") and (ii) defines it in each arch's asm/processor.h local header, just like for regular cpu_relax functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax, and thus we can take it out of mutex.h. While this can seem redundant, I believe it is a good choice as it allows us to move out arch specific logic from generic locking primitives and enables future(?) archs to transparently define it, similarly to System Z. Signed-off-by: Davidlohr Bueso <davidlohr@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Blanchard <anton@samba.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Bharat Bhushan <r65777@freescale.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Chris Zankel <chris@zankel.net> Cc: David Howells <dhowells@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Joe Perches <joe@perches.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: Joseph Myers <joseph@codesourcery.com> Cc: Kees Cook <keescook@chromium.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Mikael Starvik <starvik@axis.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Qiaowei Ren <qiaowei.ren@intel.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Miao <realmz6@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Stratos Karafotis <stratosk@semaphore.gr> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Kulikov <segoon@openwall.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Waiman Long <Waiman.Long@hp.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: adi-buildroot-devel@lists.sourceforge.net Cc: linux390@de.ibm.com Cc: linux-alpha@vger.kernel.org Cc: linux-am33-list@redhat.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-cris-kernel@axis.com Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux@lists.openrisc.net Cc: linux-m32r-ja@ml.linux-m32r.org Cc: linux-m32r@ml.linux-m32r.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-metag@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: sparclinux@vger.kernel.org Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-13Merge branch 'parisc-3.16-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "The major patch in here is one which fixes the fanotify_mark() syscall in the compat layer of the 64bit parisc kernel. It went unnoticed so long, because the calling syntax when using a 64bit parameter in a 32bit syscall is quite complex and even worse, it may be even different if you call syscall() or the glibc wrapper. This patch makes the kernel accept the calling convention when called by the glibc wrapper. The other two patches are trivial and remove unused headers, #includes and adds the serial ports of the fastest C8000 workstation to the parisc-kernel internal hardware database" * 'parisc-3.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: drop unused defines and header includes parisc: fix fanotify_mark() syscall on 32bit compat kernel parisc: add serial ports of C8000/1GHz machine to hardware database
2014-07-13parisc: drop unused defines and header includesHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-07-13parisc: fix fanotify_mark() syscall on 32bit compat kernelHelge Deller
On parisc we can not use the existing compat implementation for fanotify_mark() because for the 64bit mask parameter the higher and lower 32bits are ordered differently than what the compat function expects from big endian architectures. Specifically: It finally turned out, that on hppa we end up with different assignments of parameters to kernel arguments depending on if we call the glibc wrapper function int fanotify_mark (int __fanotify_fd, unsigned int __flags, uint64_t __mask, int __dfd, const char *__pathname); or directly calling the syscall manually syscall(__NR_fanotify_mark, ...) Reason is, that the syscall() function is implemented as C-function and because we now have the sysno as first parameter in front of the other parameters the compiler will unexpectedly add an empty paramenter in front of the u64 value to ensure the correct calling alignment for 64bit values. This means, on hppa you can't simply use syscall() to call the kernel fanotify_mark() function directly, but you have to use the glibc function instead. This patch fixes the kernel in the hppa-arch specifc coding to adjust the parameters in a way as if userspace calls the glibc wrapper function fanotify_mark(). Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-07-13parisc: add serial ports of C8000/1GHz machine to hardware databaseHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-06-06Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into next Pull arm64 updates from Catalin Marinas: - Optimised assembly string/memory routines (based on the AArch64 Cortex Strings library contributed to glibc but re-licensed under GPLv2) - Optimised crypto algorithms making use of the ARMv8 crypto extensions (together with kernel API for using FPSIMD instructions in interrupt context) - Ftrace support - CPU topology parsing from DT - ESR_EL1 (Exception Syndrome Register) exposed to user space signal handlers for SIGSEGV/SIGBUS (useful to emulation tools like Qemu) - 1GB section linear mapping if applicable - Barriers usage clean-up - Default pgprot clean-up Conflicts as per Catalin. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (57 commits) arm64: kernel: initialize broadcast hrtimer based clock event device arm64: ftrace: Add system call tracepoint arm64: ftrace: Add CALLER_ADDRx macros arm64: ftrace: Add dynamic ftrace support arm64: Add ftrace support ftrace: Add arm64 support to recordmcount arm64: Add 'notrace' attribute to unwind_frame() for ftrace arm64: add __ASSEMBLY__ in asm/insn.h arm64: Fix linker script entry point arm64: lib: Implement optimized string length routines arm64: lib: Implement optimized string compare routines arm64: lib: Implement optimized memcmp routine arm64: lib: Implement optimized memset routine arm64: lib: Implement optimized memmove routine arm64: lib: Implement optimized memcpy routine arm64: defconfig: enable a few more common/useful options in defconfig ftrace: Make CALLER_ADDRx macros more generic arm64: Fix deadlock scenario with smp_send_stop() arm64: Fix machine_shutdown() definition arm64: Support arch_irq_work_raise() via self IPIs ...
2014-06-04sys_sgetmask/sys_ssetmask: add CONFIG_SGETMASK_SYSCALLFabian Frederick
sys_sgetmask and sys_ssetmask are obsolete system calls no longer supported in libc. This patch replaces architecture related __ARCH_WANT_SYS_SGETMAX by expert mode configuration.That option is enabled by default for those architectures. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Steven Miao <realmz6@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-03Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next Pull core locking updates from Ingo Molnar: "The main changes in this cycle were: - reduced/streamlined smp_mb__*() interface that allows more usecases and makes the existing ones less buggy, especially in rarer architectures - add rwsem implementation comments - bump up lockdep limits" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) rwsem: Add comments to explain the meaning of the rwsem's count field lockdep: Increase static allocations arch: Mass conversion of smp_mb__*() arch,doc: Convert smp_mb__*() arch,xtensa: Convert smp_mb__*() arch,x86: Convert smp_mb__*() arch,tile: Convert smp_mb__*() arch,sparc: Convert smp_mb__*() arch,sh: Convert smp_mb__*() arch,score: Convert smp_mb__*() arch,s390: Convert smp_mb__*() arch,powerpc: Convert smp_mb__*() arch,parisc: Convert smp_mb__*() arch,openrisc: Convert smp_mb__*() arch,mn10300: Convert smp_mb__*() arch,mips: Convert smp_mb__*() arch,metag: Convert smp_mb__*() arch,m68k: Convert smp_mb__*() arch,m32r: Convert smp_mb__*() arch,ia64: Convert smp_mb__*() ...
2014-06-03Merge tag 'usb-3.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb into next Pull USB driver updates from Greg KH: "Here is the big USB driver pull request for 3.16-rc1. Nothing huge here, but lots of little things in the USB core, and in lots of drivers. Hopefully the USB power management will be work better now that it has been reworked to do per-port power control dynamically. There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG is finally gone now that everything has been converted over to the dynamic debug inteface, the last hold-out drivers were cleaned up and the config option removed. There were also other minor things all through the drivers/usb/ tree, the shortlog shows this pretty well. All have been in linux-next, including the very last patch, which came from linux-next to fix a build issue on some platforms" * tag 'usb-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (314 commits) usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y USB: orinoco_usb: remove CONFIG_USB_DEBUG support USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support USB: media: streamzap: remove CONFIG_USB_DEBUG USB: media: redrat3: remove CONFIG_USB_DEBUG usage USB: media: redrat3: remove unneeded tracing macro usb: qcserial: add additional Sierra Wireless QMI devices usb: host: max3421-hcd: Use module_spi_driver usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue() usb: qcserial: add Netgear AirCard 341U Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2 usb: host: xhci-plat: add xhci_plat_start() usb: host: max3421-hcd: Fix potential NULL urb dereference Revert "usb: gadget: net2280: Add support for PLX USB338X" USB: usbip: remove CONFIG_USB_DEBUG reference USB: remove CONFIG_USB_DEBUG from defconfig files usb: resume child device when port is powered on usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y ...
2014-06-02Merge tag 'pci-v3.16-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into next Pull PCI changes from Bjorn Helgaas: "Enumeration - Notify driver before and after device reset (Keith Busch) - Use reset notification in NVMe (Keith Busch) NUMA - Warn if we have to guess host bridge node information (Myron Stowe) - Work around AMD Fam15h BIOSes that fail to provide _PXM (Suravee Suthikulpanit) - Clean up and mark early_root_info_init() as deprecated (Suravee Suthikulpanit) Driver binding - Add "driver_override" for force specific binding (Alex Williamson) - Fail "new_id" addition for devices we already know about (Bandan Das) Resource management - Support BAR sizes up to 8GB (Nikhil Rao, Alan Cox) - Don't move IORESOURCE_PCI_FIXED resources (Bjorn Helgaas) - Mark SBx00 HPET BAR as IORESOURCE_PCI_FIXED (Bjorn Helgaas) - Fail safely if we can't handle BARs larger than 4GB (Bjorn Helgaas) - Reject BAR above 4GB if dma_addr_t is too small (Bjorn Helgaas) - Don't convert BAR address to resource if dma_addr_t is too small (Bjorn Helgaas) - Don't set BAR to zero if dma_addr_t is too small (Bjorn Helgaas) - Don't print anything while decoding is disabled (Bjorn Helgaas) - Don't add disabled subtractive decode bus resources (Bjorn Helgaas) - Add resource allocation comments (Bjorn Helgaas) - Restrict 64-bit prefetchable bridge windows to 64-bit resources (Yinghai Lu) - Assign i82875p_edac PCI resources before adding device (Yinghai Lu) PCI device hotplug - Remove unnecessary "dev->bus" test (Bjorn Helgaas) - Use PCI_EXP_SLTCAP_PSN define (Bjorn Helgaas) - Fix rphahp endianess issues (Laurent Dufour) - Acknowledge spurious "cmd completed" event (Rajat Jain) - Allow hotplug service drivers to operate in polling mode (Rajat Jain) - Fix cpqphp possible NULL dereference (Rickard Strandqvist) MSI - Replace pci_enable_msi_block() by pci_enable_msi_exact() (Alexander Gordeev) - Replace pci_enable_msix() by pci_enable_msix_exact() (Alexander Gordeev) - Simplify populate_msi_sysfs() (Jan Beulich) Virtualization - Add Intel Patsburg (X79) root port ACS quirk (Alex Williamson) - Mark RTL8110SC INTx masking as broken (Alex Williamson) Generic host bridge driver - Add generic PCI host controller driver (Will Deacon) Freescale i.MX6 - Use new clock names (Lucas Stach) - Drop old IRQ mapping (Lucas Stach) - Remove optional (and unused) IRQs (Lucas Stach) - Add support for MSI (Lucas Stach) - Fix imx6_add_pcie_port() section mismatch warning (Sachin Kamat) Renesas R-Car - Add gen2 device tree support (Ben Dooks) - Use new OF interrupt mapping when possible (Lucas Stach) - Add PCIe driver (Phil Edworthy) - Add PCIe MSI support (Phil Edworthy) - Add PCIe device tree bindings (Phil Edworthy) Samsung Exynos - Remove unnecessary OOM messages (Jingoo Han) - Fix add_pcie_port() section mismatch warning (Sachin Kamat) Synopsys DesignWare - Make MSI ISR shared IRQ aware (Lucas Stach) Miscellaneous - Check for broken config space aliasing (Alex Williamson) - Update email address (Ben Hutchings) - Fix Broadcom CNB20LE unintended sign extension (Bjorn Helgaas) - Fix incorrect vgaarb conditional in WARN_ON() (Bjorn Helgaas) - Remove unnecessary __ref annotations (Bjorn Helgaas) - Add arch/x86/kernel/quirks.c to MAINTAINERS PCI file patterns (Bjorn Helgaas) - Fix use of uninitialized MPS value (Bjorn Helgaas) - Tidy x86/gart messages (Bjorn Helgaas) - Fix return value from pci_user_{read,write}_config_*() (Gavin Shan) - Turn pcibios_penalize_isa_irq() into a weak function (Hanjun Guo) - Remove unused serial device IDs (Jean Delvare) - Use designated initialization in PCI_VDEVICE (Mark Rustad) - Fix powerpc NULL dereference in pci_root_buses traversal (Mike Qiu) - Configure MPS on ARM (Murali Karicheri) - Remove unnecessary includes of <linux/init.h> (Paul Gortmaker) - Move Open Firmware devspec attribute to PCI common code (Sebastian Ott) - Use pdev->dev.groups for attribute creation on s390 (Sebastian Ott) - Remove pcibios_add_platform_entries() (Sebastian Ott) - Add new ID for Intel GPU "spurious interrupt" quirk (Thomas Jarosch) - Rename pci_is_bridge() to pci_has_subordinate() (Yijing Wang) - Add and use new pci_is_bridge() interface (Yijing Wang) - Make pci_bus_add_device() void (Yijing Wang) DMA API - Clarify physical/bus address distinction in docs (Bjorn Helgaas) - Fix typos in docs (Emilio López) - Update dma_pool_create ()and dma_pool_alloc() descriptions (Gioh Kim) - Change dma_declare_coherent_memory() CPU address to phys_addr_t (Bjorn Helgaas) - Pass GAPSPCI_DMA_BASE CPU & bus address to dma_declare_coherent_memory() (Bjorn Helgaas)" * tag 'pci-v3.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (92 commits) MAINTAINERS: Add generic PCI host controller driver PCI: generic: Add generic PCI host controller driver PCI: imx6: Add support for MSI PCI: designware: Make MSI ISR shared IRQ aware PCI: imx6: Remove optional (and unused) IRQs PCI: imx6: Drop old IRQ mapping PCI: imx6: Use new clock names i82875p_edac: Assign PCI resources before adding device ARM/PCI: Call pcie_bus_configure_settings() to set MPS PCI: imx6: Fix imx6_add_pcie_port() section mismatch warning PCI: Make pci_bus_add_device() void PCI: exynos: Fix add_pcie_port() section mismatch warning PCI: Introduce new device binding path using pci_dev.driver_override PCI: rcar: Add gen2 device tree support PCI: cpqphp: Fix possible null pointer dereference PCI: rcar: Add R-Car PCIe device tree bindings PCI: rcar: Add MSI support for PCIe PCI: rcar: Add Renesas R-Car PCIe driver PCI: Fix return value from pci_user_{read,write}_config_*() PCI: exynos: Remove unnecessary OOM messages ...
2014-05-28USB: remove CONFIG_USB_DEBUG from defconfig filesGreg Kroah-Hartman
Now that CONFIG_USB_DEBUG is gone, remove it from a number of defconfig files that were enabling it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27USB: delete CONFIG_USB_DEVICEFS from defconfigNaoki MATSUMOTO
It no longer occurs in Kconfig. USB: remove CONFIG_USB_DEVICEFS(fb28d58b) leaked remove defconfig. Signed-off-by: Naoki MATSUMOTO <nekomatu+linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27PCI: Turn pcibios_penalize_isa_irq() into a weak functionHanjun Guo
pcibios_penalize_isa_irq() is only implemented by x86 now, and legacy ISA is not used by some architectures. Make pcibios_penalize_isa_irq() a __weak function to simplify the code. This removes the need for new platforms to add stub implementations of pcibios_penalize_isa_irq(). [bhelgaas: changelog, comments] Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-05-23parisc: 'renameat2()' doesn't need (or have) a separate compat system callLinus Torvalds
The 'renameat2()' system call was incorrectly added as a ENTRY_COMP() in the parisc system call table by commit 18e480aa07f78 ("parisc: add renameat2 syscall"). That causes a link-time error due to there not being any compat version of that system call: arch/parisc/kernel/built-in.o: In function `sys_call_table': (.rodata+0xad0): undefined reference to `compat_sys_renameat2' make: *** [vmlinux] Error 1 Easily fixed by marking the system call as being the same for compat as for native by using ENTRY_SAME() instead of ENTRY_COMP(). Reported-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Miklos Szeredi <miklos@szeredi.hu> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-21ftrace: Make CALLER_ADDRx macros more genericAKASHI Takahiro
Most archs with HAVE_ARCH_CALLER_ADDR have pretty much the same definitions of CALLER_ADDRx(n). Instead of duplicating the code for all the archs, define a ftrace_return_address0() and ftrace_return_address(n) that can be overwritten by the archs if they need to do something different. Instead of 7 macros in every arch, we now only have at most 2 (and actually only 1 as ftrace_return_address0() should be the same for all archs). The CALLER_ADDRx(n) will now be defined in linux/ftrace.h and use the ftrace_return_address*(n?) macros. This removes a lot of the duplicate code. Link: http://lkml.kernel.org/p/1400585464-30333-1-git-send-email-takahiro.akashi@linaro.org Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-20parisc: add renameat2 syscallMiklos Szeredi
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Helge Deller <deller@gmx.de>
2014-05-20Merge branch 'parisc-3.15-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "There are two patches in here: The first patch greatly improves latency and corrects the memory ordering in our light-weight atomic locking syscall. The second patch ratelimits printing of userspace segfaults in the same way as it's done on other platforms. This fixes a possible DOS on parisc since it prevents the syslog to grow too fast. For example, when the debian acl2 package was built on our debian buildd servers, this package produced lots of gigabytes in syslog in very short time and thus filled our harddisks, which then turned the server nearly completely unaccessible and unresponsive" * 'parisc-3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Improve LWS-CAS performance parisc: ratelimit userspace segfault printing
2014-05-15parisc: Improve LWS-CAS performanceJohn David Anglin
The attached change significantly improves the performance of the LWS-CAS code in syscall.S. This allows a number of packages to build (e.g., zeromq3, gtest and libxs) that previously failed because slow LWS-CAS performance under contention. In particular, interrupts taken while the lock was taken degraded performance significantly. The change does the following: 1) Disables interrupts around the CAS operation, and 2) Changes the loads and stores to use the ordered completer, "o", on PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is accepted on both PA 1.X and 2.0. The use of ordered loads and stores probably makes no difference on all existing hardware, but it seemed pedantically correct. In particular, the CAS operation must complete before LDCW lock is released. As written before, a processor could reorder the operations. I don't believe the period interrupts are disabled is long enough to significantly increase interrupt latency. For example, the TLB insert code is longer. Worst case is a memory fault in the CAS operation. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 3.13+ Signed-off-by: Helge Deller <deller@gmx.de>
2014-05-15parisc: ratelimit userspace segfault printingHelge Deller
Ratelimit printing of userspace segfaults and make it runtime configurable via the /proc/sys/debug/exception-trace variable. This should resolve syslog from growing way too fast and thus prevents possible system service attacks. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 3.13+
2014-05-15parisc,metag: Do not hardcode maximum userspace stack sizeHelge Deller
This patch affects only architectures where the stack grows upwards (currently parisc and metag only). On those do not hardcode the maximum initial stack size to 1GB for 32-bit processes, but make it configurable via a config option. The main problem with the hardcoded stack size is, that we have two memory regions which grow upwards: stack and heap. To keep most of the memory available for heap in a flexmap memory layout, it makes no sense to hard allocate up to 1GB of the memory for stack which can't be used as heap then. This patch makes the stack size for 32-bit processes configurable and uses 80MB as default value which has been in use during the last few years on parisc and which hasn't showed any problems yet. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net>
2014-05-15metag: Reduce maximum stack size to 256MBJames Hogan
Specify the maximum stack size for arches where the stack grows upward (parisc and metag) in asm/processor.h rather than hard coding in fs/exec.c so that metag can specify a smaller value of 256MB rather than 1GB. This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased beyond a safe value by root. E.g. when starting a process after running "ulimit -H -s unlimited" it will then attempt to use a stack size of the maximum 1GB which is far too big for metag's limited user virtual address space (stack_top is usually 0x3ffff000): BUG: failure at fs/exec.c:589/shift_arg_pages()! Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: linux-parisc@vger.kernel.org Cc: linux-metag@vger.kernel.org Cc: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # only needed for >= v3.9 (arch/metag)
2014-05-01Merge branch 'parisc-3.15-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Drop the architecture-specifc value for_STK_LIM_MAX to fix stack related problems with GNU make" * 'parisc-3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use generic uapi/asm/resource.h file parisc: remove _STK_LIM_MAX override
2014-05-01parisc: Use generic uapi/asm/resource.h fileHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2014-05-01parisc: remove _STK_LIM_MAX overrideJohn David Anglin
There are only a couple of architectures that override _STK_LIM_MAX to a non-infinity value. This changes the stack allocation semantics in subtle ways. For example, GNU make changes its stack allocation to the hard maximum defined by _STK_LIM_MAX. As a results, threads executed by processes running under make are allocated a stack size of _STK_LIM_MAX rather than a sensible default value. This causes various thread stress tests to fail when they can't muster more than about 50 threads. The attached change implements the default behavior used by the majority of architectures. Signed-off-by: John David Anglin <dave.anglin@bell.net> Reviewed-by: Carlos O'Donell <carlos@systemhalted.org> Cc: stable@vger.kernel.org # 3.14 Signed-off-by: Helge Deller <deller@gmx.de>
2014-04-18arch,parisc: Convert smp_mb__*()Peter Zijlstra
parisc fully relies on asm-generic/barrier.h, therefore its smp_mb() is barrier and the default implementation suffices. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-mxs4aubiyesi79v8xx53093q@git.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-parisc@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17Merge branch 'parisc-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "There are two major changes in this patchset: The major fix is that the epoll_pwait() syscall for 32bit userspace was not using the compat wrapper on a 64bit kernel. Secondly we changed the value of SHMLBA from 4MB to PAGE_SIZE to reflect that we can actually mmap to any multiple of PAGE_SIZE. The only thing which needs care is that shared mmaps need to be mapped at the same offset inside the 4MB cache window" * 'parisc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix epoll_pwait syscall on compat kernel parisc: change value of SHMLBA from 0x00400000 to PAGE_SIZE parisc: Replace __get_cpu_var uses for address calculation
2014-04-13parisc: fix epoll_pwait syscall on compat kernelHelge Deller
This bug was detected with the libio-epoll-perl debian package where the test case IO-Ppoll-compat.t failed. Signed-off-by: Helge Deller <deller@gmx.de> CC: stable@kernel.org # 3.0+
2014-04-13parisc: change value of SHMLBA from 0x00400000 to PAGE_SIZEHelge Deller
On parisc, SHMLBA was defined to 0x00400000 (4MB) to reflect that we need to take care of our caches for shared mappings. But actually, we can map a file at any multiple address of PAGE_SIZE, so let us correct that now with a value of PAGE_SIZE for SHMLBA. Instead we now take care of this cache colouring via the constant SHM_COLOUR while we map shared pages. Signed-off-by: Helge Deller <deller@gmx.de> CC: Jeroen Roovers <jer@gentoo.org> CC: John David Anglin <dave.anglin@bell.net> CC: Carlos O'Donell <carlos@systemhalted.org> Cc: stable@kernel.org [3.13+]
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-04-03parisc: Replace __get_cpu_var uses for address calculationChristoph Lameter
Convert to the use of this_cpu_ptr(). Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Helge Deller <deller@gmx.de>
2014-04-01Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq code updates from Thomas Gleixner: "The irq department proudly presents: - Another tree wide sweep of irq infrastructure abuse. Clear winner of the trainwreck engineering contest was: #include "../../../kernel/irq/settings.h" - Tree wide update of irq_set_affinity() callbacks which miss a cpu online check when picking a single cpu out of the affinity mask. - Tree wide consolidation of interrupt statistics. - Updates to the threaded interrupt infrastructure to allow explicit wakeup of the interrupt thread and a variant of synchronize_irq() which synchronizes only the hard interrupt handler. Both are needed to replace the homebrewn thread handling in the mmc/sdhci code. - New irq chip callbacks to allow proper support for GPIO based irqs. The GPIO based interrupts need to request/release GPIO resources from request/free_irq. - A few new ARM interrupt chips. No revolutionary new hardware, just differently wreckaged variations of the scheme. - Small improvments, cleanups and updates all over the place" I was hoping that that trainwreck engineering contest was a April Fools' joke. But no. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits) irqchip: sun7i/sun6i: Disable NMI before registering the handler ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controller ARM: sun7i/sun6i: irqchip: Update the documentation ARM: sun7i/sun6i: dts: Add NMI irqchip support ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller genirq: Export symbol no_action() arm: omap: Fix typo in ams-delta-fiq.c m68k: atari: Fix the last kernel_stat.h fallout irqchip: sun4i: Simplify sun4i_irq_ack irqchip: sun4i: Use handle_fasteoi_irq for all interrupts genirq: procfs: Make smp_affinity values go+r softirq: Add linux/irq.h to make it compile again m68k: amiga: Add linux/irq.h to make it compile again irqchip: sun4i: Don't ack IRQs > 0, fix acking of IRQ 0 irqchip: sun4i: Fix a comment about mask register initialization irqchip: sun4i: Fix irq 0 not working genirq: Add a new IRQCHIP_EOI_THREADED flag genirq: Document IRQCHIP_ONESHOT_SAFE flag ARM: sunxi: dt: Convert to the new irq controller compatibles irqchip: sunxi: Change compatibles ...
2014-03-31Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking updates from Ingo Molnar: "The biggest change is the MCS spinlock generalization changes from Tim Chen, Peter Zijlstra, Jason Low et al. There's also lockdep fixes/enhancements from Oleg Nesterov, in particular a false negative fix related to lockdep_set_novalidate_class() usage" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) locking/mutex: Fix debug checks locking/mutexes: Add extra reschedule point locking/mutexes: Introduce cancelable MCS lock for adaptive spinning locking/mutexes: Unlock the mutex without the wait_lock locking/mutexes: Modify the way optimistic spinners are queued locking/mutexes: Return false if task need_resched() in mutex_can_spin_on_owner() locking: Move mcs_spinlock.h into kernel/locking/ m68k: Skip futex_atomic_cmpxchg_inatomic() test futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test Revert "sched/wait: Suppress Sparse 'variable shadowing' warning" lockdep: Change lockdep_set_novalidate_class() to use _and_name lockdep: Change mark_held_locks() to check hlock->check instead of lockdep_no_validate lockdep: Don't create the wrong dependency on hlock->check == 0 lockdep: Make held_lock->check and "int check" argument bool locking/mcs: Allow architecture specific asm files to be used for contended case locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order sched/wait: Suppress Sparse 'variable shadowing' warning hung_task/Documentation: Fix hung_task_warnings description locking/mcs: Allow architectures to hook in to contended paths locking/mcs: Micro-optimize the MCS code, add extra comments ...
2014-03-23parisc: locks: remove redundant arch_*_relax operationsWill Deacon
Now that the arch_{spin,read,write}_relax macros default to cpu_relax(), remove the redundant definitions for parisc. Cc: Helge Deller <deller@gmx.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Helge Deller <deller@gmx.de>
2014-03-23parisc: wire up sys_utimesHelge Deller
We seem to be nearly the only platform which does not provide the sys_utimes syscall. Adding it now makes our life much easier with userspace applications (like dietlibc and e2fsprogs) since we then behave like all other platforms too and don't need extra patches which are hard to get upstream anyway because we are not a mainstream architecture. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v3.13
2014-03-23parisc: Remove unused CONFIG_PARISC_TMPALIAS codeJohn David Anglin
The attached change removes the unused and experimental CONFIG_PARISC_TMPALIAS code. It doesn't work and I don't believe it will ever be used. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2014-03-20audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALLAKASHI Takahiro
Currently AUDITSYSCALL has a long list of architecture depencency: depends on AUDIT && (X86 || PARISC || PPC || S390 || IA64 || UML || SPARC64 || SUPERH || (ARM && AEABI && !OABI_COMPAT) || ALPHA) The purpose of this patch is to replace it with HAVE_ARCH_AUDITSYSCALL for simplicity. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> (arm) Acked-by: Richard Guy Briggs <rgb@redhat.com> (audit) Acked-by: Matt Turner <mattst88@gmail.com> (alpha) Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Eric Paris <eparis@redhat.com>
2014-03-12parisc: Validate online cpus in irq_set_affinity() callbacksThomas Gleixner
The [user space] interface does not filter out offline cpus. It merily guarantees that the mask contains at least one online cpu. So the selector in the irq chip implementation needs to make sure to pick only an online cpu because otherwise: Offline Core 1 Set affinity to 0xe (is valid due to online mask 0xd) cpumask_first will pick core 1, which is offline Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Link: http://lkml.kernel.org/r/20140304203100.859489993@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-02-09locking/mcs: Allow architecture specific asm files to be used for contended caseTim Chen
This patch allows each architecture to add its specific assembly optimized arch_mcs_spin_lock_contended and arch_mcs_spinlock_uncontended for MCS lock and unlock functions. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: AswinChandramouleeswaran <aswin@hp.com> Cc: George Spelvin <linux@horizon.com> Cc: Rik vanRiel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: MichelLespinasse <walken@google.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alex Shi <alex.shi@linaro.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Figo.zhang" <figo1802@gmail.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Will Deacon <will.deacon@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1390347382.3138.67.camel@schen9-DESK Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09locking/mcs: Order the header files in Kbuild of each architecture in ↵Tim Chen
alphabetical order We perform a clean up of the Kbuid files in each architecture. We order the files in each Kbuild in alphabetical order by running the below script. for i in arch/*/include/asm/Kbuild do cat $i | gawk '/^generic-y/ { i = 3; do { for (; i <= NF; i++) { if ($i == "\\") { getline; i = 1; continue; } if ($i != "") hdr[$i] = $i; } break; } while (1); next; } // { print $0; } END { n = asort(hdr); for (i = 1; i <= n; i++) print "generic-y += " hdr[i]; }' > ${i}.sorted; mv ${i}.sorted $i; done Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com> Cc: AswinChandramouleeswaran <aswin@hp.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com> Cc: Scott J Norton <scott.norton@hp.com> Cc: Will Deacon <will.deacon@arm.com> Cc: "Figo.zhang" <figo1802@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rik van Riel <riel@redhat.com> Cc: Waiman Long <waiman.long@hp.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Alex Shi <alex.shi@linaro.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: George Spelvin <linux@horizon.com> Cc: MichelLespinasse <walken@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> [ Fixed build bug. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-05execve: use 'struct filename *' for executable name passingLinus Torvalds
This changes 'do_execve()' to get the executable name as a 'struct filename', and to free it when it is done. This is what the normal users want, and it simplifies and streamlines their error handling. The controlled lifetime of the executable name also fixes a use-after-free problem with the trace_sched_process_exec tracepoint: the lifetime of the passed-in string for kernel users was not at all obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize the pathname allocation lifetime with the execve() having finished, which in turn meant that the trace point that happened after mm_release() of the old process VM ended up using already free'd memory. To solve the kernel string lifetime issue, this simply introduces "getname_kernel()" that works like the normal user-space getname() function, except with the source coming from kernel memory. As Oleg points out, this also means that we could drop the tcomm[] array from 'struct linux_binprm', since the pathname lifetime now covers setup_new_exec(). That would be a separate cleanup. Reported-by: Igor Zhbanov <i.zhbanov@samsung.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-02parisc: add flexible mmap memory layout supportHelge Deller
Add support for the flexible mmap memory layout (as described in http://lwn.net/Articles/91829). This is especially very interesting on parisc since we currently only support 32bit userspace (even with a 64bit Linux kernel). Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: Make EWOULDBLOCK be equal to EAGAIN on pariscGuy Martin
On Linux, only parisc uses a different value for EWOULDBLOCK which causes a lot of troubles for applications not checking for both values. Since the hpux compat is long dead, make EWOULDBLOCK behave the same as all other architectures. Signed-off-by: Guy Martin <gmsoft@tuxicoman.be> Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: convert uapi/asm/stat.h to use native types onlyHelge Deller
The stat.h header file is exported to userspace. Some userspace applications failed to compile due to missing/unknown types, so we better convert it to use native types only (like it's done on other architectures too). Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: wire up sched_setattr and sched_getattrHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2014-02-02parisc: fix cache-flushingHelge Deller
This commit: f8dae00684d678afa13041ef170cecfd1297ed40: parisc: Ensure full cache coherency for kmap/kunmap caused negative caching side-effects, e.g. hanging processes with expect and too many inequivalent alias messages from flush_dcache_page() on Debian 5 systems. This patch now partly reverts it and has been in production use on our debian buildd makeservers since a week without any major problems. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Helge Deller <deller@gmx.de>
2014-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
2014-01-23Kconfig: update flightly outdated CONFIG_SMP documentationRobert Graffham
Remove an outdated reference to "most personal computers" having only one CPU, and change the use of "singleprocessor" and "single processor" in CONFIG_SMP's documentation to "uniprocessor" across all arches where that documentation is present. Signed-off-by: Robert Graffham <psquid@psquid.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22Merge tag 'pci-v3.14-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 20:58:34 +0000