summaryrefslogtreecommitdiff
path: root/arch/parisc
AgeCommit message (Collapse)Author
2019-08-03parisc/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS supportSven Schnelle
Pass ftrace_ops to ftrace functions to ftrace_trace_function(). Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-08-01parisc: Add archclean Makefile targetJames Bottomley
Apparently we don't have an archclean target in our arch/parisc/Makefile, so files in there never get cleaned out by make mrproper. This, in turn means that the sizes.h file in arch/parisc/boot/compressed never gets removed and worse, when you transition to an O=build/parisc[64] build model it overrides the generated file. The upshot being my bzImage was building with a SZ_end that was too small. I fixed it by making mrproper clean everything. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-08-01parisc: Strip debug info from kernel before creating compressed vmlinuzHelge Deller
Same as on x86-64, strip the .comment, .note and debug sections from the Linux kernel before creating the compressed image for the boot loader. Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reported-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-08-01parisc: Fix build of compressed kernel even with debug enabledHelge Deller
With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get that huge that we need to increase the start addresss for the decompression text section otherwise one will face a linker error. Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: fix race condition in patching codeSven Schnelle
Assume the following ftrace code sequence that was patched in earlier by ftrace_make_call(): PAGE A: ffc: addr of ftrace_caller() PAGE B: 000: 0x6fc10080 /* stw,ma r1,40(sp) */ 004: 0x48213fd1 /* ldw -18(r1),r1 */ 008: 0xe820c002 /* bv,n r0(r1) */ 00c: 0xe83f1fdf /* b,l,n .-c,r1 */ When a Code sequences that is to be patched spans a page break, we might have already cleared the part on the PAGE A. If an interrupt is coming in during the remap of the fixed mapping to PAGE B, it might execute the patched function with only parts of the FTRACE code cleared. To prevent this, clear the jump to our mini trampoline first, and clear the remaining parts after this. This might also happen when patch_text() patches a function that it calls during remap. Signed-off-by: Sven Schnelle <svens@stackframe.org> Cc: <stable@vger.kernel.org> # 5.2+ Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: rename default_defconfig to defconfigMasahiro Yamada
'default_defconfig' is an awkward name since 'defconfig' is the default. Let's simply say 'defconfig' like other architectures. You can drop the KBUILD_DEFCONFIG define by following the standard naming. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: Fix fall-through warnings in fpudispatch.cHelge Deller
In fpudispatch.c we see a lot of fall-through warnings, but for this file we prefer to not mark the switches and instead keep it in it's original state as it's copied from HP-UX. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-31parisc: Mark expected switch fall-throughs in fault.cHelge Deller
Fix a fall-through warning in fault.c. Fixes: a035d552a93b ("Makefile: Globally enable fall-through warning") Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-21parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machinesHelge Deller
flush_tlb_all_local() flushes the ITLB and DTLB of the CPU. In case the machine does not have separate ITLBs and DTLBs, use the alternative functionality to replace the code which flushes the ITLB with nops while keeping the code which flushes the DTLB. Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-21parisc: add kprobe_fault_handler()Sven Schnelle
Add kprobe_fault_handler() to fix compilation for PA-RISC. On PA-RISC we actually don't need that function as the recovery counter is restored after interrupt. See the PA-RISC 2.0 Architecture Manual, pg. 4-8, Figure 4-4: "Interruption Processing". Fixes: b98cca444d28 ("mm, kprobes: generalize and rename notify_page_fault() as kprobe_page_fault()") Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-18Merge branch 'parisc-5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Prevent kernel panics by adding proper checking of register values injected via the ptrace interface - Wire up the new clone3 syscall * 'parisc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Wire up clone3 syscall parisc: Avoid kernel panic triggered by invalid kprobe parisc: Ensure userspace privilege for ptraced processes in regset functions parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1
2019-07-17parisc: Wire up clone3 syscallHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Sven Schnelle <svens@stackframe.org> Acked-by: Christian Brauner <christian@brauner.io>
2019-07-17parisc: Avoid kernel panic triggered by invalid kprobeHelge Deller
When running gdb I was able to trigger this kernel panic: Kernel Fault: Code=26 (Data memory access rights trap) at addr 0000000000000060 CPU: 0 PID: 1401 Comm: gdb-crash Not tainted 5.2.0-rc7-64bit+ #1053 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001000000000000001111 Not tainted r00-03 000000000804000f 0000000040dee1a0 0000000040c78cf0 00000000b8d50160 r04-07 0000000040d2b1a0 000000004360a098 00000000bbbe87b8 0000000000000003 r08-11 00000000fac20a70 00000000fac24160 00000000fac1bbe0 0000000000000000 r12-15 00000000fabfb79a 00000000fac244a4 0000000000010000 0000000000000001 r16-19 00000000bbbe87b8 00000000f8f02910 0000000000010034 0000000000000000 r20-23 00000000fac24630 00000000fac24630 000000006474e552 00000000fac1aa52 r24-27 0000000000000028 00000000bbbe87b8 00000000bbbe87b8 0000000040d2b1a0 r28-31 0000000000000000 00000000b8d501c0 00000000b8d501f0 0000000003424000 sr00-03 0000000000423000 0000000000000000 0000000000000000 0000000000423000 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 0000000040c78cf0 0000000040c78cf4 IIR: 539f00c0 ISR: 0000000000000000 IOR: 0000000000000060 CPU: 0 CR30: 00000000b8d50000 CR31: 00000000d22345e2 ORIG_R28: 0000000040250798 IAOQ[0]: parisc_kprobe_ss_handler+0x58/0x170 IAOQ[1]: parisc_kprobe_ss_handler+0x5c/0x170 RP(r2): parisc_kprobe_ss_handler+0x58/0x170 Backtrace: [<0000000040206ff8>] handle_interruption+0x178/0xbb8 Kernel panic - not syncing: Kernel Fault Avoid this panic by checking the return value of kprobe_running() and skip kprobe if none is currently active. Cc: <stable@vger.kernel.org> # v5.2 Acked-by: Sven Schnelle <svens@stackframe.org> Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-17parisc: Ensure userspace privilege for ptraced processes in regset functionsHelge Deller
On parisc the privilege level of a process is stored in the lowest two bits of the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0 for the kernel and privilege level 3 for user-space. So userspace should not be allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege level to e.g. 0 to try to gain kernel privileges. This patch prevents such modifications in the regset support functions by always setting the two lowest bits to one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are modified via ptrace regset calls. Link: https://bugs.gentoo.org/481768 Cc: <stable@vger.kernel.org> # v4.7+ Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-17parisc: Fix kernel panic due invalid values in IAOQ0 or IAOQ1Helge Deller
On parisc the privilege level of a process is stored in the lowest two bits of the instruction pointers (IAOQ0 and IAOQ1). On Linux we use privilege level 0 for the kernel and privilege level 3 for user-space. So userspace should not be allowed to modify IAOQ0 or IAOQ1 of a ptraced process to change it's privilege level to e.g. 0 to try to gain kernel privileges. This patch prevents such modifications by always setting the two lowest bits to one (which relates to privilege level 3 for user-space) if IAOQ0 or IAOQ1 are modified via ptrace calls in the native and compat ptrace paths. Link: https://bugs.gentoo.org/481768 Reported-by: Jeroen Roovers <jer@gentoo.org> Cc: <stable@vger.kernel.org> Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2019-07-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "VM: - z3fold fixes and enhancements by Henry Burns and Vitaly Wool - more accurate reclaimed slab caches calculations by Yafang Shao - fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by Christoph Hellwig - !CONFIG_MMU fixes by Christoph Hellwig - new novmcoredd parameter to omit device dumps from vmcore, by Kairui Song - new test_meminit module for testing heap and pagealloc initialization, by Alexander Potapenko - ioremap improvements for huge mappings, by Anshuman Khandual - generalize kprobe page fault handling, by Anshuman Khandual - device-dax hotplug fixes and improvements, by Pavel Tatashin - enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V - add pte_devmap() support for arm64, by Robin Murphy - unify locked_vm accounting with a helper, by Daniel Jordan - several misc fixes core/lib: - new typeof_member() macro including some users, by Alexey Dobriyan - make BIT() and GENMASK() available in asm, by Masahiro Yamada - changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better code generation, by Alexey Dobriyan - rbtree code size optimizations, by Michel Lespinasse - convert struct pid count to refcount_t, by Joel Fernandes get_maintainer.pl: - add --no-moderated switch to skip moderated ML's, by Joe Perches misc: - ptrace PTRACE_GET_SYSCALL_INFO interface - coda updates - gdb scripts, various" [ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ] * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) fs/select.c: use struct_size() in kmalloc() mm: add account_locked_vm utility function arm64: mm: implement pte_devmap support mm: introduce ARCH_HAS_PTE_DEVMAP mm: clean up is_device_*_page() definitions mm/mmap: move common defines to mman-common.h mm: move MAP_SYNC to asm-generic/mman-common.h device-dax: "Hotremove" persistent memory that is used like normal RAM mm/hotplug: make remove_memory() interface usable device-dax: fix memory and resource leak if hotplug fails include/linux/lz4.h: fix spelling and copy-paste errors in documentation ipc/mqueue.c: only perform resource calculation if user valid include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures scripts/gdb: add helpers to find and list devices scripts/gdb: add lx-genpd-summary command drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl kernel/pid.c: convert struct pid count to refcount_t drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining() select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR ...
2019-07-16parisc: define syscall_get_error()Dmitry V. Levin
syscall_get_error() is required to be implemented on all architectures in addition to already implemented syscall_get_nr(), syscall_get_arguments(), syscall_get_return_value(), and syscall_get_arch() functions in order to extend the generic ptrace API with PTRACE_GET_SYSCALL_INFO request. Link: http://lkml.kernel.org/r/20190510152812.GD28558@altlinux.org Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Helge Deller <deller@gmx.de> [parisc] Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: Eugene Syromyatnikov <esyr@redhat.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greentime Hu <greentime@andestech.com> Cc: James Hogan <jhogan@kernel.org> Cc: kbuild test robot <lkp@intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Shuah Khan <shuah@kernel.org> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-16Merge tag 'docs/v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull rst conversion of docs from Mauro Carvalho Chehab: "As agreed with Jon, I'm sending this big series directly to you, c/c him, as this series required a special care, in order to avoid conflicts with other trees" * tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits) docs: kbuild: fix build with pdf and fix some minor issues docs: block: fix pdf output docs: arm: fix a breakage with pdf output docs: don't use nested tables docs: gpio: add sysfs interface to the admin-guide docs: locking: add it to the main index docs: add some directories to the main documentation index docs: add SPDX tags to new index files docs: add a memory-devices subdir to driver-api docs: phy: place documentation under driver-api docs: serial: move it to the driver-api docs: driver-api: add remaining converted dirs to it docs: driver-api: add xilinx driver API documentation docs: driver-api: add a series of orphaned documents docs: admin-guide: add a series of orphaned documents docs: cgroup-v1: add it to the admin-guide book docs: aoe: add it to the driver-api book docs: add some documentation dirs to the driver-api book docs: driver-model: move it to the driver-api book docs: lp855x-driver.rst: add it to the driver-api book ...
2019-07-15docs: admin-guide: add a series of orphaned documentsMauro Carvalho Chehab
There are lots of documents that belong to the admin-guide but are on random places (most under Documentation root dir). Move them to the admin guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
2019-07-15arch: mark syscall number 435 reserved for clone3Christian Brauner
A while ago Arnd made it possible to give new system calls the same syscall number on all architectures (except alpha). To not break this nice new feature let's mark 435 for clone3 as reserved on all architectures that do not yet implement it. Even if an architecture does not plan to implement it this ensures that new system calls coming after clone3 will have the same number on all architectures. Signed-off-by: Christian Brauner <christian@brauner.io> Cc: linux-arch@vger.kernel.org Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/r/20190714192205.27190-2-christian@brauner.io Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-12Merge tag 'kbuild-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove headers_{install,check}_all targets - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES - re-implement 'make headers_install' more cleanly - add new header-test-y syntax to compile-test headers - compile-test exported headers to ensure they are compilable in user-space - compile-test headers under include/ to ensure they are self-contained - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value flags - add -Werror=unknown-warning-option for Clang - add 128-bit built-in types support to genksyms - fix missed rebuild of modules.builtin - propagate 'No space left on device' error in fixdep to Make - allow Clang to use its integrated assembler - improve some coccinelle scripts - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute path for $(srctree). - do not ignore errors when compression utility is missing - misc cleanups * tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits) kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix kbuild: Inform user to pass ARCH= for make mrproper kbuild: fix compression errors getting ignored kbuild: add a flag to force absolute path for srctree kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree kbuild: remove src and obj from the top Makefile scripts/tags.sh: remove unused environment variables from comments scripts/tags.sh: drop SUBARCH support for ARM kbuild: compile-test kernel headers to ensure they are self-contained kheaders: include only headers into kheaders_data.tar.xz kheaders: remove meaningless -R option of 'ls' kbuild: support header-test-pattern-y kbuild: do not create wrappers for header-test-y kbuild: compile-test exported headers to ensure they are self-contained init/Kconfig: add CONFIG_CC_CAN_LINK kallsyms: exclude kasan local symbols on s390 kbuild: add more hints about SUBDIRS replacement coccinelle: api/stream_open: treat all wait_.*() calls as blocking coccinelle: put_device: Add a cast to an expression for an assignment coccinelle: put_device: Adjust a message construction ...
2019-07-12Merge tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - move the USB special case that bounced DMA through a device bar into the USB code instead of handling it in the common DMA code (Laurentiu Tudor and Fredrik Noring) - don't dip into the global CMA pool for single page allocations (Nicolin Chen) - fix a crash when allocating memory for the atomic pool failed during boot (Florian Fainelli) - move support for MIPS-style uncached segments to the common code and use that for MIPS and nios2 (me) - make support for DMA_ATTR_NON_CONSISTENT and DMA_ATTR_NO_KERNEL_MAPPING generic (me) - convert nds32 to the generic remapping allocator (me) * tag 'dma-mapping-5.3' of git://git.infradead.org/users/hch/dma-mapping: (29 commits) dma-mapping: mark dma_alloc_need_uncached as __always_inline MIPS: only select ARCH_HAS_UNCACHED_SEGMENT for non-coherent platforms usb: host: Fix excessive alignment restriction for local memory allocations lib/genalloc.c: Add algorithm, align and zeroed family of DMA allocators nios2: use the generic uncached segment support in dma-direct nds32: use the generic remapping allocator for coherent DMA allocations arc: use the generic remapping allocator for coherent DMA allocations dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code dma-mapping: add a dma_alloc_need_uncached helper openrisc: remove the partial DMA_ATTR_NON_CONSISTENT support arc: remove the partial DMA_ATTR_NON_CONSISTENT support arm-nommu: remove the partial DMA_ATTR_NON_CONSISTENT support ARM: dma-mapping: allow larger DMA mask than supported dma-mapping: truncate dma masks to what dma_addr_t can hold iommu/dma: Apply dma_{alloc,free}_contiguous functions dma-remap: Avoid de-referencing NULL atomic_pool MIPS: use the generic uncached segment support in dma-direct dma-direct: provide generic support for uncached kernel segments au1100fb: fix DMA API abuse ...
2019-07-12parisc: switch to generic version of pte allocationMike Rapoport
parisc allocates PTE pages with __get_free_page() and uses GFP_KERNEL | __GFP_ZERO for the allocations. Switch it to the generic version that does exactly the same thing for the kernel page tables and adds __GFP_ACCOUNT for the user PTEs. The pte_free_kernel() and pte_free() versions on are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-12-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-10Merge tag 'pidfd-updates-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This adds two main features. - First, it adds polling support for pidfds. This allows process managers to know when a (non-parent) process dies in a race-free way. The notification mechanism used follows the same logic that is currently used when the parent of a task is notified of a child's death. With this patchset it is possible to put pidfds in an {e}poll loop and get reliable notifications for process (i.e. thread-group) exit. - The second feature compliments the first one by making it possible to retrieve pollable pidfds for processes that were not created using CLONE_PIDFD. A lot of processes get created with traditional PID-based calls such as fork() or clone() (without CLONE_PIDFD). For these processes a caller can currently not create a pollable pidfd. This is a problem for Android's low memory killer (LMK) and service managers such as systemd. Both patchsets are accompanied by selftests. It's perhaps worth noting that the work done so far and the work done in this branch for pidfd_open() and polling support do already see some adoption: - Android is in the process of backporting this work to all their LTS kernels [1] - Service managers make use of pidfd_send_signal but will need to wait until we enable waiting on pidfds for full adoption. - And projects I maintain make use of both pidfd_send_signal and CLONE_PIDFD [2] and will use polling support and pidfd_open() too" [1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22 [2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753 * tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add pidfd_open() tests arch: wire-up pidfd_open() pid: add pidfd_open() pidfd: add polling selftests pidfd: add polling support
2019-07-11kbuild: remove src and obj from the top MakefileMasahiro Yamada
Replace $(src) and $(obj) with $(srctree) and $(objtree), respectively. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-09Merge branch 'parisc-5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Dynamic ftrace support by Sven Schnelle and a header guard fix by Denis Efremov" * 'parisc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: asm: psw.h: missing header guard parisc: add dynamic ftrace compiler.h: add CC_USING_PATCHABLE_FUNCTION_ENTRY parisc: use pr_debug() in kernel/module.c parisc: add WARN_ON() to clear_fixmap parisc: add spinlock to patch function parisc: add support for patching multiple words
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-06-28arch: wire-up pidfd_open()Christian Brauner
This wires up the pidfd_open() syscall into all arches at once. Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org
2019-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The new route handling in ip_mc_finish_output() from 'net' overlapped with the new support for returning congestion notifications from BPF programs. In order to handle this I had to take the dev_loopback_xmit() calls out of the switch statement. The aquantia driver conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-25parisc: asm: psw.h: missing header guardDenis Efremov
The psw.h header file contains #ifndef directive of the guard, but the complimentary #define directive is missing. The patch adds the appropriate #define to fix the header guard. Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-25dma-direct: handle DMA_ATTR_NON_CONSISTENT in common codeChristoph Hellwig
Only call into arch_dma_alloc if we require an uncached mapping, and remove the parisc code manually doing normal cached DMA_ATTR_NON_CONSISTENT allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Helge Deller <deller@gmx.de> # parisc
2019-06-25Merge branch 'parisc-5.2-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Add missing PCREL64 relocation in module loader to fix module load errors when the static branch and JUMP_LABEL feature is enabled on a 64-bit kernel" * 'parisc-5.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix module loading error with JUMP_LABEL feature
2019-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor SPDX change conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-06-19 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) new SO_REUSEPORT_DETACH_BPF setsocktopt, from Martin. 2) BTF based map definition, from Andrii. 3) support bpf_map_lookup_elem for xskmap, from Jonathan. 4) bounded loops and scalar precision logic in the verifier, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-15kbuild: add CONFIG_HEADERS_INSTALL and loosen the dependency of samplesMasahiro Yamada
Commit 5318321d367c ("samples: disable CONFIG_SAMPLES for UML") used a big hammer to fix the build errors under the samples/ directory. Only some samples actually include uapi headers from usr/include. Introduce CONFIG_HEADERS_INSTALL since 'depends on HEADERS_INSTALL' is clearer than 'depends on !UML'. If this option is enabled, uapi headers are installed before starting directory descending. I added 'depends on HEADERS_INSTALL' to per-sample CONFIG options. This allows UML to compile some samples. $ make ARCH=um allmodconfig samples/ [ snip ] CC [M] samples/configfs/configfs_sample.o CC [M] samples/kfifo/bytestream-example.o CC [M] samples/kfifo/dma-example.o CC [M] samples/kfifo/inttype-example.o CC [M] samples/kfifo/record-example.o CC [M] samples/kobject/kobject-example.o CC [M] samples/kobject/kset-example.o CC [M] samples/trace_events/trace-events-sample.o CC [M] samples/trace_printk/trace-printk.o AR samples/vfio-mdev/built-in.a AR samples/built-in.a Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-15bpf: net: Add SO_DETACH_REUSEPORT_BPFMartin KaFai Lau
There is SO_ATTACH_REUSEPORT_[CE]BPF but there is no DETACH. This patch adds SO_DETACH_REUSEPORT_BPF sockopt. The same sockopt can be used to undo both SO_ATTACH_REUSEPORT_[CE]BPF. reseport_detach_prog() is added and it is mostly a mirror of the existing reuseport_attach_prog(). The differences are, it does not call reuseport_alloc() and returns -ENOENT when there is no old prog. Cc: Craig Gallek <kraig@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-08Merge tag 'spdx-5.2-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...
2019-06-08parisc: Fix module loading error with JUMP_LABEL featureHelge Deller
Commit 62217beb394e ("parisc: Add static branch and JUMP_LABEL feature") missed to add code to handle PCREL64 relocations which are generated when creating a jump label on a 64-bit kernel. This patch fixes module load errors like this one: # modprobe -v ipv6 insmod /lib/modules/5.2.0-rc1-JeR/kernel/net/ipv6/ipv6.ko modprobe: ERROR: could not insert 'ipv6': Exec format error dmesg reports: module ipv6: Unknown relocation: 72 Reported-by: Jeroen Roovers <jer@gentoo.org> Tested-by: Jeroen Roovers <jer@gentoo.org> Fixes: 62217beb394e ("parisc: Add static branch and JUMP_LABEL feature") Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-08parisc: add dynamic ftraceSven Schnelle
This patch implements dynamic ftrace for PA-RISC. The required mcount call sequences can get pretty long, so instead of patching the whole call sequence out of the functions, we are using -fpatchable-function-entry from gcc. This puts a configurable amount of NOPS before/at the start of the function. Taking do_sys_open() as example, which would look like this when the call is patched out: 1036b248: 08 00 02 40 nop 1036b24c: 08 00 02 40 nop 1036b250: 08 00 02 40 nop 1036b254: 08 00 02 40 nop 1036b258 <do_sys_open>: 1036b258: 08 00 02 40 nop 1036b25c: 08 03 02 41 copy r3,r1 1036b260: 6b c2 3f d9 stw rp,-14(sp) 1036b264: 08 1e 02 43 copy sp,r3 1036b268: 6f c1 01 00 stw,ma r1,80(sp) When ftrace gets enabled for this function the kernel will patch these NOPs to: 1036b248: 10 19 57 20 <address of ftrace> 1036b24c: 6f c1 00 80 stw,ma r1,40(sp) 1036b250: 48 21 3f d1 ldw -18(r1),r1 1036b254: e8 20 c0 02 bv,n r0(r1) 1036b258 <do_sys_open>: 1036b258: e8 3f 1f df b,l,n .-c,r1 1036b25c: 08 03 02 41 copy r3,r1 1036b260: 6b c2 3f d9 stw rp,-14(sp) 1036b264: 08 1e 02 43 copy sp,r3 1036b268: 6f c1 01 00 stw,ma r1,80(sp) So the first NOP in do_sys_open() will be patched to jump backwards into some minimal trampoline code which pushes a stackframe, saves r1 which holds the return address, loads the address of the real ftrace function, and branches to that location. For 64 Bit things are getting a bit more complicated (and longer) because we must make sure that the address of ftrace location is 8 byte aligned, and the offset passed to ldd for fetching the address is 8 byte aligned as well. Note that gcc has a bug which misplaces the function label, and needs a patch to make dynamic ftrace work. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90751 for details. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-08parisc: use pr_debug() in kernel/module.cSven Schnelle
Instead of using our own version, switch to the generic pr_() calls. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-08parisc: add WARN_ON() to clear_fixmapSven Schnelle
Calling clear_fixmap() on an already cleared fixed mapping is a bad thing to do. Add a WARN_ON() to catch such issues. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-08parisc: add spinlock to patch functionSven Schnelle
If multiple CPUs are patching code we need the spinlock to protect against parallel fixmap maps/unmap calls. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-08parisc: add support for patching multiple wordsSven Schnelle
add patch_text_multiple() which allows to patch multiple text words in memory. This can be used to copy functions. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-06Merge branch 'parisc-5.2-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix crashes when accessing PCI devices on some machines like C240 and J5000. The crashes were triggered because we replaced cache flushes by nops in the alternative coding where we shouldn't for some machines. - Dave fixed a race in the usage of the sr1 space register when used to load the coherence index. - Use the hardware lpa instruction to to load the physical address of kernel virtual addresses in the iommu driver code. - The kernel may fail to link when CONFIG_MLONGCALLS isn't set. Solve that by rearranging functions in the final vmlinux executeable. - Some defconfig cleanups and removal of compiler warnings. * 'parisc-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix crash due alternative coding for NP iopdir_fdc bit parisc: Use lpa instruction to load physical addresses in driver code parisc: configs: Remove useless UEVENT_HELPER_PATH parisc: Use implicit space register selection for loading the coherence index of I/O pdirs parisc: Fix compiler warnings in float emulation code parisc/slab: cleanup after /proc/slab_allocators removal parisc: Allow building 64-bit kernel without -mlong-calls compiler option parisc: Kconfig: remove ARCH_DISCARD_MEMBLOCK
2019-06-06parisc: Fix crash due alternative coding for NP iopdir_fdc bitHelge Deller
According to the found documentation, data cache flushes and sync instructions are needed on the PCX-U+ (PA8200, e.g. C200/C240) platforms, while PCX-W (PA8500, e.g. C360) platforms aparently don't need those flushes when changing the IO PDIR data structures. We have no documentation for PCX-W+ (PA8600) and PCX-W2 (PA8700) CPUs, but Carlo Pisani reported that his C3600 machine (PA8600, PCX-W+) fails when the fdc instructions were removed. His firmware didn't set the NIOP bit, so one may assume it's a firmware bug since other C3750 machines had the bit set. Even if documentation (as mentioned above) states that PCX-W (PA8500, e.g. J5000) does not need fdc flushes, Sven could show that an Adaptec 29320A PCI-X SCSI controller reliably failed on a dd command during the first five minutes in his J5000 when fdc flushes were missing. Going forward, we will now NOT replace the fdc and sync assembler instructions by NOPS if: a) the NP iopdir_fdc bit was set by firmware, or b) we find a CPU up to and including a PCX-W+ (PA8600). This fixes the HPMC crashes on a C240 and C36XX machines. For other machines we rely on the firmware to set the bit when needed. In case one finds HPMC issues, people could try to boot their machines with the "no-alternatives" kernel option to turn off any alternative patching. Reported-by: Sven Schnelle <svens@stackframe.org> Reported-by: Carlo Pisani <carlojpisani@gmail.com> Tested-by: Sven Schnelle <svens@stackframe.org> Fixes: 3847dab77421 ("parisc: Add alternative coding infrastructure") Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 5.0+
2019-06-06parisc: Use lpa instruction to load physical addresses in driver codeJohn David Anglin
Most I/O in the kernel is done using the kernel offset mapping. However, there is one API that uses aliased kernel address ranges: > The final category of APIs is for I/O to deliberately aliased address > ranges inside the kernel. Such aliases are set up by use of the > vmap/vmalloc API. Since kernel I/O goes via physical pages, the I/O > subsystem assumes that the user mapping and kernel offset mapping are > the only aliases. This isn't true for vmap aliases, so anything in > the kernel trying to do I/O to vmap areas must manually manage > coherency. It must do this by flushing the vmap range before doing > I/O and invalidating it after the I/O returns. For this reason, we should use the hardware lpa instruction to load the physical address of kernel virtual addresses in the driver code. I believe we only use the vmap/vmalloc API with old PA 1.x processors which don't have a sba, so we don't hit this problem. Tested on c3750, c8000 and rp3440. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-06parisc: configs: Remove useless UEVENT_HELPER_PATHKrzysztof Kozlowski
Remove the CONFIG_UEVENT_HELPER_PATH because: 1. It is disabled since commit 1be01d4a5714 ("driver: base: Disable CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was made default to 'n', 2. It is not recommended (help message: "This should not be used today [...] creates a high system load") and was kept only for ancient userland, 3. Certain userland specifically requests it to be disabled (systemd README: "Legacy hotplug slows down the system and confuses udev"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Helge Deller <deller@gmx.de>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 09:07:39 +0000