| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed get_fs/set_fs
- removed broken/unmaintained MIPS KVM trap and emulate support
- added support for Loongson-2K1000
- fixes and cleanups
* tag 'mips_5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
MIPS: BCM63XX: Use BUG_ON instead of condition followed by BUG.
MIPS: select ARCH_KEEP_MEMBLOCK unconditionally
mips: Do not include hi and lo in clobber list for R6
MIPS:DTS:Correct the license for Loongson-2K
MIPS:DTS:Fix label name and interrupt number of ohci for Loongson-2K
MIPS: Avoid handcoded DIVU in `__div64_32' altogether
lib/math/test_div64: Correct the spelling of "dividend"
lib/math/test_div64: Fix error message formatting
mips/bootinfo:correct some comments of fw_arg
MIPS: Avoid DIVU in `__div64_32' is result would be zero
MIPS: Reinstate platform `__div64_32' handler
div64: Correct inline documentation for `do_div'
lib/math: Add a `do_div' test module
MIPS: Makefile: Replace -pg with CC_FLAGS_FTRACE
MIPS: pci-legacy: revert "use generic pci_enable_resources"
MIPS: Loongson64: Add kexec/kdump support
MIPS: pci-legacy: use generic pci_enable_resources
MIPS: pci-legacy: remove busn_resource field
MIPS: pci-legacy: remove redundant info messages
MIPS: pci-legacy: stop using of_pci_range_to_resource
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota, ext2, reiserfs updates from Jan Kara:
- support for path (instead of device) based quotactl syscall
(quotactl_path(2))
- ext2 conversion to kmap_local()
- other minor cleanups & fixes
* tag 'for_v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/reiserfs/journal.c: delete useless variables
fs/ext2: Replace kmap() with kmap_local_page()
ext2: Match up ext2_put_page() with ext2_dotdot() and ext2_find_entry()
fs/ext2/: fix misspellings using codespell tool
quota: report warning limits for realtime space quotas
quota: wire up quotactl_path
quota: Add mountpath based quota support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Here's a collection of largely clk driver updates. The usual suspects
are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip,
but it feels pretty light on commits.
There's only one real commit to the framework core and that's to
consolidate code. Otherwise the diffstat is dominated by many Qualcomm
clk driver patches that modernize the driver for the proper way of
speciying clk parents. That's shifting data around, which could subtly
break things so I'll be on the lookout for fixes.
New Drivers:
- Proper clk driver for Mediatek MT7621 SoCs
- Support for the clock controller on the new Rockchip rk3568
Updates:
- Simplify Zynq Kconfig dependencies
- Use clk_hw pointers in socfpga driver
- Cleanup parent data in qcom clk drivers
- Some cleanups for rk3399 modularization
- Fix reparenting of i.MX UART clocks by initializing only the ones
associated to stdout
- Correct the PCIE clocks for i.MX8MP and i.MX8MQ
- Make i.MX LPCG and SCU clocks return on registering failure
- Kernel doc fixes
- Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N
- Add timer (TMU) clocks on Renesas R-Car H3 ES1.0
- Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on
Renesas R-Car V3U
- Sigma-delta modulation on Allwinner V3s audio PLL"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits)
MAINTAINERS: add MT7621 CLOCK maintainer
staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk'
staging: mt7621-dts: make use of new 'mt7621-clk'
clk: ralink: add clock driver for mt7621 SoC
clk: uniphier: Fix potential infinite loop
clk: qcom: rpmh: add support for SDX55 rpmh IPA clock
clk: qcom: gcc-sdm845: get rid of the test clock
clk: qcom: convert SDM845 Global Clock Controller to parent_data
dt-bindings: clock: separate SDM845 GCC clock bindings
clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE
clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE
dt: bindings: add mt7621-sysc device tree binding documentation
dt-bindings: clock: add dt binding header for mt7621 clocks
clk: samsung: Remove redundant dev_err calls
clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable
clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback
clk: zynqmp: Drop dependency on ARCH_ZYNQMP
clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected
clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents
...
|
|
Pull block driver updates from Jens Axboe:
- MD changes via Song:
- raid5 POWER fix
- raid1 failure fix
- UAF fix for md cluster
- mddev_find_or_alloc() clean up
- Fix NULL pointer deref with external bitmap
- Performance improvement for raid10 discard requests
- Fix missing information of /proc/mdstat
- rsxx const qualifier removal (Arnd)
- Expose allocated brd pages (Calvin)
- rnbd via Gioh Kim:
- Change maintainer
- Change domain address of maintainers' email
- Add polling IO mode and document update
- Fix memory leak and some bug detected by static code analysis
tools
- Code refactoring
- Series of floppy cleanups/fixes (Denis)
- s390 dasd fixes (Julian)
- kerneldoc fixes (Lee)
- null_blk double free (Lv)
- null_blk virtual boundary addition (Max)
- Remove xsysace driver (Michal)
- umem driver removal (Davidlohr)
- ataflop fixes (Dan)
- Revalidate disk removal (Christoph)
- Bounce buffer cleanups (Christoph)
- Mark lightnvm as deprecated (Christoph)
- mtip32xx init cleanups (Shixin)
- Various fixes (Tian, Gustavo, Coly, Yang, Zhang, Zhiqiang)
* tag 'for-5.13/drivers-2021-04-27' of git://git.kernel.dk/linux-block: (143 commits)
async_xor: increase src_offs when dropping destination page
drivers/block/null_blk/main: Fix a double free in null_init.
md/raid1: properly indicate failure when ending a failed write request
md-cluster: fix use-after-free issue when removing rdev
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
brd: expose number of allocated pages in debugfs
ataflop: fix off by one in ataflop_probe()
ataflop: potential out of bounds in do_format()
drbd: Fix fall-through warnings for Clang
block/rnbd: Use strscpy instead of strlcpy
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
block/rnbd-clt: Remove max_segment_size
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
block/rnbd-srv: Remove unused arguments of rnbd_srv_rdma_ev
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The usual updates from the irq departement:
Core changes:
- Provide IRQF_NO_AUTOEN as a flag for request*_irq() so drivers can
be cleaned up which either use a seperate mechanism to prevent
auto-enable at request time or have a racy mechanism which disables
the interrupt right after request.
- Get rid of the last usage of irq_create_identity_mapping() and
remove the interface.
- An overhaul of tasklet_disable().
Most usage sites of tasklet_disable() are in task context and
usually in cleanup, teardown code pathes. tasklet_disable()
spinwaits for a tasklet which is currently executed. That's not
only a problem for PREEMPT_RT where this can lead to a live lock
when the disabling task preempts the softirq thread. It's also
problematic in context of virtualization when the vCPU which runs
the tasklet is scheduled out and the disabling code has to spin
wait until it's scheduled back in.
There are a few code pathes which invoke tasklet_disable() from
non-sleepable context. For these a new disable variant which still
spinwaits is provided which allows to switch tasklet_disable() to a
sleep wait mechanism. For the atomic use cases this does not solve
the live lock issue on PREEMPT_RT. That is mitigated by blocking on
the RT specific softirq lock.
- The PREEMPT_RT specific implementation of softirq processing and
local_bh_disable/enable().
On RT enabled kernels soft interrupt processing happens always in
task context and all interrupt handlers, which are not explicitly
marked to be invoked in hard interrupt context are forced into task
context as well. This allows to protect against softirq processing
with a per CPU lock, which in turn allows to make BH disabled
regions preemptible.
Most of the softirq handling code is still shared. The RT/non-RT
specific differences are addressed with a set of inline functions
which provide the context specific functionality. The
local_bh_disable() / local_bh_enable() mechanism are obviously
seperate.
- The usual set of small improvements and cleanups
Driver changes:
- New drivers for Nuvoton WPCM450 and DT 79rc3243x interrupt
controllers
- Extended functionality for MStar, STM32 and SC7280 irq chips
- Enhanced robustness for ARM GICv3/4.1 drivers
- The usual set of cleanups and improvements all over the place"
* tag 'irq-core-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
irqchip/xilinx: Expose Kconfig option for Zynq/ZynqMP
irqchip/gic-v3: Do not enable irqs when handling spurious interrups
dt-bindings: interrupt-controller: Add IDT 79RC3243x Interrupt Controller
irqchip: Add support for IDT 79rc3243x interrupt controller
irqdomain: Drop references to recusive irqdomain setup
irqdomain: Get rid of irq_create_strict_mappings()
irqchip/jcore-aic: Kill use of irq_create_strict_mappings()
ARM: PXA: Kill use of irq_create_strict_mappings()
irqchip/gic-v4.1: Disable vSGI upon (GIC CPUIF < v4.1) detection
irqchip/tb10x: Use 'fallthrough' to eliminate a warning
genirq: Reduce irqdebug cacheline bouncing
kernel: Initialize cpumask before parsing
irqchip/wpcm450: Drop COMPILE_TEST
irqchip/irq-mst: Support polarity configuration
irqchip: Add driver for WPCM450 interrupt controller
dt-bindings: interrupt-controller: Add nuvoton, wpcm450-aic
dt-bindings: qcom,pdc: Add compatible for sc7280
irqchip/stm32: Add usart instances exti direct event support
irqchip/gic-v3: Fix OF_BAD_ADDR error handling
irqchip/sifive-plic: Mark two global variables __ro_after_init
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- crypto_destroy_tfm now ignores errors as well as NULL pointers
Algorithms:
- Add explicit curve IDs in ECDH algorithm names
- Add NIST P384 curve parameters
- Add ECDSA
Drivers:
- Add support for Green Sardine in ccp
- Add ecdh/curve25519 to hisilicon/hpre
- Add support for AM64 in sa2ul"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (184 commits)
fsverity: relax build time dependency on CRYPTO_SHA256
fscrypt: relax Kconfig dependencies for crypto API algorithms
crypto: camellia - drop duplicate "depends on CRYPTO"
crypto: s5p-sss - consistently use local 'dev' variable in probe()
crypto: s5p-sss - remove unneeded local variable initialization
crypto: s5p-sss - simplify getting of_device_id match data
ccp: ccp - add support for Green Sardine
crypto: ccp - Make ccp_dev_suspend and ccp_dev_resume void functions
crypto: octeontx2 - add support for OcteonTX2 98xx CPT block.
crypto: chelsio/chcr - Remove useless MODULE_VERSION
crypto: ux500/cryp - Remove duplicate argument
crypto: chelsio - remove unused function
crypto: sa2ul - Add support for AM64
crypto: sa2ul - Support for per channel coherency
dt-bindings: crypto: ti,sa2ul: Add new compatible for AM64
crypto: hisilicon - enable new error types for QM
crypto: hisilicon - add new error type for SEC
crypto: hisilicon - support new error types for ZIP
crypto: hisilicon - dynamic configuration 'err_info'
crypto: doc - fix kernel-doc notation in chacha.c and af_alg.c
...
|
|
BUG_ON uses unlikely in if(), it can be optimized at compile time.
Usually, the condition in if() is not satisfied. In my opinion,
this can improve the efficiency of the multi-stage pipeline.
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
While removing allnoconfig_y from Kconfig, ARCH=mips allnoconfig builds
started failing with the error:
WARNING: modpost: vmlinux.o(.text+0x9c70): Section mismatch in reference
from the function reserve_exception_space() to the function
.meminit.text:memblock_reserve()
The function reserve_exception_space() references the function __meminit
memblock_reserve().
This is often because reserve_exception_space lacks a __meminit
annotation or the annotation of memblock_reserve is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
allnoconfig disables DEBUG_KERNEL and thus ARCH_KEEP_MEMBLOCK, which
changes __init_memblock to be equivalent to __meminit triggering the
above error.
Link: https://lore.kernel.org/linux-kbuild/20210313194836.372585-11-masahiroy@kernel.org/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
From [1]
"GCC 10 (PR 91233) won't silently allow registers that are not
architecturally available to be present in the clobber list anymore,
resulting in build failure for mips*r6 targets in form of:
...
.../sysdep.h:146:2: error: the register ‘lo’ cannot be clobbered in ‘asm’ for the current target
146 | __asm__ volatile ( \
| ^~~~~~~
This is because base R6 ISA doesn't define hi and lo registers w/o DSP
extension. This patch provides the alternative clobber list for r6 targets
that won't include those registers."
Since kernel 5.4 and mips support for generic vDSO [2], the kernel fail to
build for mips r6 cpus with gcc 10 for the same reason as glibc.
[1] https://sourceware.org/git/?p=glibc.git;a=commit;h=020b2a97bb15f807c0482f0faee2184ed05bcad8
[2] '24640f233b46 ("mips: Add support for generic vDSO")'
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
make license from GPL3.0 to GPL2.0
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
from Loongson-2K1000 user manual know that under pci bus
the device num is 4, function number is 2 and register is 0x2200
is ohci. the ohci interrupt number is 51. because Loongson-2K1000 has
64 interrupt sources, 0-31 correspond to the device tree liointc0 device
node, and the other correspond to liointc1 node. so it should be
number 19 correspon to liointc1.
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove the inline asm with a DIVU instruction from `__div64_32' and use
plain C code for the intended DIVMOD calculation instead. GCC is smart
enough to know that both the quotient and the remainder are calculated
with single DIVU, so with ISAs up to R5 the same instruction is actually
produced with overall similar code.
For R6 compiled code will work, but separate DIVU and MODU instructions
will be produced, which are also interlocked, so scalar implementations
will likely not perform as well as older ISAs with their asynchronous MD
unit. Likely still faster then the generic algorithm though.
This removes a compilation error for R6 however where the original DIVU
instruction is not supported anymore and the MDU accumulator registers
have been removed and consequently GCC complains as to a constraint it
cannot find a register for:
In file included from ./include/linux/math.h:5,
from ./include/linux/kernel.h:13,
from mm/page-writeback.c:15:
./include/linux/math64.h: In function 'div_u64_rem':
./arch/mips/include/asm/div64.h:76:17: error: inconsistent operand constraints in an 'asm'
76 | __asm__("divu $0, %z1, %z2" \
| ^~~~~~~
./include/asm-generic/div64.h:245:25: note: in expansion of macro '__div64_32'
245 | __rem = __div64_32(&(n), __base); \
| ^~~~~~~~~~
./include/linux/math64.h:91:22: note: in expansion of macro 'do_div'
91 | *remainder = do_div(dividend, divisor);
| ^~~~~~
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0404s from 1.0445s with R3400
@40MHz. The module's MIPS I machine code has also shrunk by 12 bytes or
3 instructions.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
from arch/mips/kernel/head.S we know that use a0~a3 for fw_arg0~fw_arg3
there is some code from head.S:
LONG_S a0, fw_arg0 # firmware arguments
LONG_S a1, fw_arg1
LONG_S a2, fw_arg2
LONG_S a3, fw_arg3
Signed-off-by: xiaochuan mao <maoxiaochuan@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
We already check the high part of the divident against zero to avoid the
costly DIVU instruction in that case, needed to reduce the high part of
the divident, so we may well check against the divisor instead and set
the high part of the quotient to zero right away. We need to treat the
high part the divident in that case though as the remainder that would
be calculated by the DIVU instruction we avoided.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0445s and 0.2619s from 1.0668s
and 0.2629s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Our current MIPS platform `__div64_32' handler is inactive, because it
is incorrectly only enabled for 64-bit configurations, for which generic
`do_div' code does not call it anyway.
The handler is not suitable for being called from there though as it
only calculates 32 bits of the quotient under the assumption the 64-bit
divident has been suitably reduced. Code for such reduction used to be
there, however it has been incorrectly removed with commit c21004cd5b4c
("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0."), which should
have only updated an obsoleted constraint for an inline asm involving
$hi and $lo register outputs, while possibly wiring the original MIPS
variant of the `do_div' macro as `__div64_32' handler for the generic
`do_div' implementation
Correct the handler as follows then:
- Revert most of the commit referred, however retaining the current
formatting, except for the final two instructions of the inline asm
sequence, which the original commit missed. Omit the original 64-bit
parts though.
- Rename the original `do_div' macro to `__div64_32'. Use the combined
`x' constraint referring to the MD accumulator as a whole, replacing
the original individual `h' and `l' constraints used for $hi and $lo
registers respectively, of which `h' has been obsoleted with GCC 4.4.
Update surrounding code accordingly.
We have since removed support for GCC versions before 4.9, so no need
for a special arrangement here; GCC has supported the `x' constraint
since forever anyway, or at least going back to 1991.
- Rename the `__base' local variable in `__div64_32' to `__radix' to
avoid a conflict with a local variable in `do_div'.
- Actually enable this code for 32-bit rather than 64-bit configurations
by qualifying it with BITS_PER_LONG being 32 instead of 64. Include
<asm/bitsperlong.h> for this macro rather than <linux/types.h> as we
don't need anything else.
- Finally include <asm-generic/div64.h> last rather than first.
This has passed correctness verification with test_div64 and reduced the
module's average execution time down to 1.0668s and 0.2629s from 2.1529s
and 0.5647s respectively for an R3400 CPU @40MHz and a 5Kc CPU @160MHz.
For a reference 64-bit `do_div' code where we have the DDIVU instruction
available to do the whole calculation right away averages at 0.0660s for
the latter CPU.
Fixes: c21004cd5b4c ("MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.")
Reported-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Signed-off-by: zhaoxiao <zhaoxiao@uniontech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
This mostly reverts commit 99bca615d895 ("MIPS: pci-legacy: use generic
pci_enable_resources"). Fixes regressions such as:
ata_piix 0000:00:0a.1: can't enable device: BAR 0 [io 0x01f0-0x01f7] not
claimed
ata_piix: probe of 0000:00:0a.1 failed with error -22
The only changes from the strict revert are to fix checkpatch errors:
ERROR: spaces required around that '=' (ctx:VxV)
#33: FILE: arch/mips/pci/pci-legacy.c:252:
+ for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
^
ERROR: do not use assignment in if condition
#67: FILE: arch/mips/pci/pci-legacy.c:284:
+ if ((err = pcibios_enable_resources(dev, mask)) < 0)
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
If there is no mac address passed via platform data try to get it via
device tree and fall back to a random mac address, if all fail.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Get rid of access to struct korina_device by just passing the mac
address via platform data and use drvdata for passing netdev to remove
function.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add kexec/kdump support for Loongson64 by:
1, Provide Loongson-specific kexec functions: loongson_kexec_prepare(),
loongson_kexec_shutdown() and loongson_crash_shutdown();
2, Provide Loongson-specific assembly code in kexec_smp_wait();
To start Loongson64, The boot CPU needs 3 parameters:
fw_arg0: the number of arguments in cmdline (i.e., argc).
fw_arg1: structure holds cmdline such as "root=/dev/sda1 console=tty"
(i.e., argv).
fw_arg2: environment (i.e., envp, additional boot parameters from LEFI).
Non-boot CPUs do not need one parameter as the IPI mailbox base address.
They query their own IPI mailbox to get PC, SP and GP in a loopi, until
the boot CPU brings them up.
loongson_kexec_prepare(): Setup cmdline for kexec/kdump. The kexec/kdump
cmdline comes from kexec's "append" option string. This structure will
be parsed in fw_init_cmdline() of arch/mips/fw/lib/cmdline.c. Both image
->control_code_page and the cmdline need to be in a safe memory region
(memory allocated by the old kernel may be corrupted by the new kernel).
In order to maintain compatibility for the old firmware, the low 2MB is
reserverd and safe for Loongson. So let KEXEC_CTRL_CODE and KEXEC_ARGV_
ADDR be here. LEFI parameters may be corrupted at runtime, so backup it
at mips_reboot_setup(), and then restore it at loongson_kexec_shutdown()
/loongson_crash_shutdown().
loongson_kexec_shutdown(): Wake up all present CPUs and let them go to
reboot_code_buffer. Pass the kexec parameters to kexec_args.
loongson_crash_shutdown(): Pass the kdump parameters to kexec_args.
The assembly part in kexec_smp_wait provide a routine as BIOS does, in
order to keep secondary CPUs in a querying loop.
The layout of low 2MB memory in our design:
0x80000000, the first MB, the first 64K, Exception vectors
0x80010000, the first MB, the second 64K, STR (suspend) data
0x80020000, the first MB, the third and fourth 64K, UEFI HOB
0x80040000, the first MB, the fifth 64K, RT-Thread for SMC
0x80100000, the second MB, the first 64K, KEXEC code
0x80108000, the second MB, the second 64K, KEXEC data
Cc: Eric Biederman <ebiederm@xmission.com>
Tested-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Follow the reasoning from commit 842de40d93e0 ("PCI: add generic
pci_enable_resources()"):
The only functional difference from the MIPS version is that the
generic one uses "!r->parent" to check for resource collisions
instead of "!r->start && r->end".
That should have no effect on any pci-legacy driver.
Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
No drivers set the busn_resource field in the pci_controller struct.
Commit 7ee214b540d9 ("MIPS: PCI: Remove unused busn_offset") almost
removed it over 3 years ago. Remove it for good to free up memory and
eliminate messages like:
pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove the following pci-legacy message:
PCI host bridge /pci@440000/host-bridge ranges:
MEM 0x0000000020000000..0x000000002fffffff
IO 0x0000000000460000..0x000000000046ffff
It is followed shortly by the same data from pci_register_host_bridge:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
pci_bus 0000:00: root bus resource [io 0x460000-0x46ffff]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Mirror commit aeba3731b150 ("powerpc/pci: Fix IO space breakage after
of_pci_range_to_resource() change").
Most MIPS platforms do not define PCI_IOBASE, nor implement
pci_address_to_pio(). Moreover, IO_SPACE_LIMIT is 0xffff for most MIPS
platforms. of_pci_range_to_resource passes the _start address_ of the IO
range into pci_address_to_pio, which then checks it against
IO_SPACE_LIMIT and fails, because for MIPS platforms that use
pci-legacy (pci-lantiq, pci-rt3883, pci-mt7620), IO ranges start much
higher than 0xffff.
In fact, pci-mt7621 in staging already works around this problem, see
commit 09dd629eeabb ("staging: mt7621-pci: fix io space and properly set
resource limits")
So just stop using of_pci_range_to_resource, which does not work for
MIPS.
Fixes PCI errors like:
pci_bus 0000:00: root bus resource [io 0xffffffff]
Fixes: 0b0b0893d49b ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Existing strings do not make sense: one is always NULL and the other
refers to the wrong parent node.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Fixes the following compiler warning:
warning: unused variable 'flags' [-Wunused-variable]
Fixes: e5067c718b3a ("MIPS: pci-rt3883: Remove odd locking in PCI config space access code")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: trivial@kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Mirror pci-rt3883 fix from commit e5067c718b3a ("MIPS: pci-rt3883:
Remove odd locking in PCI config space access code"). pci-rt2880 shares
the driver layout with pci-rt3883 and the same reasons apply.
Caller (generic PCI code) already does proper locking, so no need to add
another one here. Local PCI read/write functions are never called
simultaneously, also they do not require synchronization with the PCI
controller ops, since they are used before the controller registration.
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
pci_fixup_irqs() used to call pcibios_map_irq on every PCI device, which
for RT2880 included bus 0 slot 0. After pci_fixup_irqs() got removed,
only slots/funcs with devices attached would be called. While arguably
the right thing, that left no chance for this driver to ever initialize
slot 0, effectively bricking PCI and USB on RT2880 devices such as the
Belkin F5D8235-4 v1.
Slot 0 configuration needs to happen after PCI bus enumeration, but
before any device at slot 0x11 (func 0 or 1) is talked to. That was
determined empirically by testing on a Belkin F5D8235-4 v1 device. A
minimal BAR 0 config write followed by read, then setting slot 0
PCI_COMMAND to MASTER | IO | MEMORY is all that seems to be required for
proper functionality.
Tested by ensuring that full- and high-speed USB devices get enumerated
on the Belkin F5D8235-4 v1 (with an out of tree DTS file from OpenWrt).
Fixes: 04c81c7293df ("MIPS: PCI: Replace pci_fixup_irqs() call with host bridge IRQ mapping hooks")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Tobias Wolf <dev-NTEO@vplace.de>
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 04324f44cb69 ("MIPS: Remove get_fs/set_fs") changed the access_ok
for strnlen_user to check the whole range, which broke some callers
of strndup_user(). Restore the old behaviour and just check the first byte.
Fixes: 04324f44cb69 ("MIPS: Remove get_fs/set_fs")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The MIPS implementation of access_ok() incorrectly reports that access
to the final byte of user memory is not OK, much as the alpha & SH
versions did prior to commit 94bd8a05cd4d ("Fix 'acccess_ok()' on alpha
and SH").
For example on a MIPS64 system with __UA_LIMIT == 0xffff000000000000 we
incorrectly fail in the following cases:
access_ok(0xffffffffffff, 0x1) = 0
access_ok(0xfffffffffffe, 0x2) = 0
Fix MIPS in the same way as alpha & SH, by subtracting one from the addr
+ size condition when size is non-zero. With this the access_ok() calls
above return 1 indicating that the access may be valid.
The cost of the improved check is pretty minimal - we gain 2410 bytes,
or 0.03%, in kernel code size for a 64r6el_defconfig kernel built using
GCC 8.1.0.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Vendor listed for mediatek in kernel vendor file 'vendor-prefixes.yaml'
contains 'mediatek' as a valid vendor string. Some nodes in the device
tree are using an invalid vendor string vfor 'mtk' instead. Fix all of
them in dts file. Update also ralink mt7621 related code to properly
match new strings. Even there are used in the device tree there are
some strings that are not referred anywhere but have been also updated
with new vendor name. These are 'mtk,mt7621-wdt', 'mtk,mt7621-nand',
'mtk,mt7621-mc', and 'mtk,mt7621-cpc'.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210410055059.13518-4-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lifu Chen <chenlifu@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Most MT7621 SoCs have 2 cores, which is detected and supported properly
by CPS.
Unfortunately, MT7621 SoC has a less common S variant with only one core.
On MT7621S, GCR_CONFIG still reports 2 cores, which leads to hangs when
starting SMP. CPULAUNCH registers can be used in that case to detect the
absence of the second core and override the GCR_CONFIG PCORES field.
Rework a long-standing OpenWrt patch to override the value of
mips_cps_numcores on single-core MT7621 systems.
Tested on a dual-core MT7621 device (Ubiquiti ER-X) and a single-core
MT7621 device (Netgear R6220).
Original 4.14 OpenWrt patch:
Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=commitdiff;h=4cdbc90a376dd0555201c1434a2081e055e9ceb7
Current 5.10 OpenWrt patch:
Link: https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch;h=c63f0f4c1ec742e24d8480e80553863744b58f6a;hb=10267e17299806f9885d086147878f6c492cb904
Suggested-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
With the latest mkimage from U-Boot 2021.04, the generic defconfigs no
longer build, failing with:
/usr/bin/mkimage: verify_header failed for FIT Image support with exit code 1
This is expected after the linked U-Boot commits because '@' is
forbidden in the node names due to the way that libfdt treats nodes with
the same prefix but different unit addresses.
Switch the '@' in the node name to '-'. Drop the unit addresses from the
hash and kernel child nodes because there is only one node so they do
not need to have a number to differentiate them.
Cc: stable@vger.kernel.org
Link: https://source.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4
Link: https://source.denx.de/u-boot/u-boot/-/commit/3f04db891a353f4b127ed57279279f851c6b4917
Suggested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Clean up macros even further after removal get_fs/set_fs.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cavium Octeon has its own memcpy implementation and also need the change
done in commit 04324f44cb69 ("MIPS: Remove get_fs/set_fs").
Fixes: 04324f44cb69 ("MIPS: Remove get_fs/set_fs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 45deb5faeb9e ("MIPS: uaccess: Remove get_fs/set_fs call sites")
caused a few new sparse warnings, fix them.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Use the generic irq_domain_simple_ops structure instead of
a home-grown one.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
RT288X systems may have a non-zero ramstart causing problems with memory
reservations and boot hangs, as well as messages like:
Wasting 1048576 bytes for tracking 32768 unused pages
Both are alleviated by selecting MIPS_AUTO_PFN_OFFSET for such
platforms.
Tested on a Belkin F5D8235 v1 RT2880 device.
Link: https://lore.kernel.org/linux-mips/20180820233111.xww5232dxbuouf4n@pburton-laptop/
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Loongson64 processors have a writecombine issue that maybe failed to
write back framebuffer used with ATI Radeon or AMD GPU at times, after
commit 8a08e50cee66 ("drm: Permit video-buffers writecombine mapping
for MIPS"), there exists some errors such as blurred screen and lockup,
and so on.
[ 60.958721] radeon 0000:03:00.0: ring 0 stalled for more than 10079msec
[ 60.965315] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000112 last fence id 0x000000000000011d on ring 0)
[ 60.976525] radeon 0000:03:00.0: ring 3 stalled for more than 10086msec
[ 60.983156] radeon 0000:03:00.0: GPU lockup (current fence id 0x0000000000000374 last fence id 0x00000000000003a8 on ring 3)
As discussed earlier [1], it might be better to disable writecombine
on the CPU detection side because the root cause is unknown now.
Actually, this patch is a temporary solution to just make it work well,
it is not a proper and final solution, I hope someone will have a better
solution to fix this issue in the future.
[1] https://lore.kernel.org/patchwork/patch/1285542/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
All get_fs/set_fs calls in MIPS code are gone, so remove implementation
of it. With the clear separation of user/kernel space access we no
longer need the EVA special handling, so get rid of that, too.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Use new helpers to access user/kernel for functions, which are used with
user/kernel pointers. Instead of dealing with get_fs/set_fs select
user/kernel access via parameter.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Added __get/__put_kernel_nofault as preparation for removing
get/set_fs.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
flush_icache_range always does flush kernel address ranges, so no
need to do the set_fs dance.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Provide hooks to intercept bad usages of virt_to_phys() and
__pa_symbol() throughout the kernel. To make this possible, we need to
rename the current implement of virt_to_phys() into
__virt_to_phys_nodebug() and wrap it around depending on
CONFIG_DEBUG_VIRTUAL.
A similar thing is needed for __pa_symbol() which is now aliased to
__phys_addr_symbol() whose implementation is either the direct return of
RELOC_HIDE or goes through the debug version.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add hsspi-osc clock.
- Add watchdog.
- Add HS SPI controller
- Add NAND controller.
- Add USBH PHY.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add watchdog controller.
- Add SPI controller.
- Add NAND controller.
- Add USBH PHY controller.
- Add RNG controller.
- Add cfi-flash controller.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add hsspi-osc clock.
- Add watchdog.
- Add SPI controller.
- Add HS SPI controller.
- Add NAND controller.
- Add USBH PHY.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
