summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2011-01-10Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2011-01-07Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (36 commits) serial: apbuart: Fixup apbuart_console_init() TTY: Add tty ioctl to figure device node of the system console. tty: add 'active' sysfs attribute to tty0 and console device drivers: serial: apbuart: Handle OF failures gracefully Serial: Avoid unbalanced IRQ wake disable during resume tty: fix typos/errors in tty_driver.h comments pch_uart : fix warnings for 64bit compile 8250: fix uninitialized FIFOs ip2: fix compiler warning on ip2main_pci_tbl specialix: fix compiler warning on specialix_pci_tbl rocket: fix compiler warning on rocket_pci_ids 8250: add a UPIO_DWAPB32 for 32 bit accesses 8250: use container_of() instead of casting serial: omap-serial: Add support for kernel debugger serial: fix pch_uart kconfig & build drivers: char: hvc: add arm JTAG DCC console support RS485 documentation: add 16C950 UART description serial: ifx6x60: fix memory leak serial: ifx6x60: free IRQ on error Serial: EG20T: add PCH_UART driver ... Fixed up conflicts in drivers/serial/apbuart.c with evil merge that makes the code look fairly sane (unlike either side).
2010-12-29of/flattree: Add Kconfig for EARLY_FLATTREEStephen Neuendorffer
The device tree code is now in two pieces: some which can be used generically on any platform which selects CONFIG_OF_FLATTREE, and some early which is used at boot time on only a few architectures. This patch segregates the early code so that only those architectures which care about it need compile it. This also means that some of the requirements in the early code (such as a cmd_line variable) that most architectures (e.g. X86) don't provide can be ignored. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> [grant.likely@secretlab.ca: remove extra blank line addition] [grant.likely@secretlab.ca: fixed incorrect #ifdef CONFIG_EARLY_FLATTREE check] [grant.likely@secretlab.ca: Made OF_EARLY_FLATTREE select instead of depend on OF_FLATTREE] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-22Merge commit 'v2.6.37-rc7' into perf/coreIngo Molnar
Merge reason: Pick up the latest -rc. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-17MIPS: Fix build errors in sc-mips.cKevin Cernekee
Seen with malta_defconfig on Linus' tree: CC arch/mips/mm/sc-mips.o arch/mips/mm/sc-mips.c: In function 'mips_sc_is_activated': arch/mips/mm/sc-mips.c:77: error: 'config2' undeclared (first use in this function) arch/mips/mm/sc-mips.c:77: error: (Each undeclared identifier is reported only once arch/mips/mm/sc-mips.c:77: error: for each function it appears in.) arch/mips/mm/sc-mips.c:81: error: 'tmp' undeclared (first use in this function) make[2]: *** [arch/mips/mm/sc-mips.o] Error 1 make[1]: *** [arch/mips/mm] Error 2 make: *** [arch/mips] Error 2 [Ralf: Cosmetic changes to minimize the number of arguments passed to mips_sc_is_activated] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1752/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16TTY: Add tty ioctl to figure device node of the system console.Werner Fink
This has been in the SuSE kernels for a very long time. Signed-off-by: Werner Fink <werner@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-16MIPS: Add a CONFIG_FORCE_MAX_ZONEORDER Kconfig option.David Daney
For huge page support with base page size of 16K or 32K, we have to increase the MAX_ORDER so that huge pages can be allocated. [Ralf: I don't think a user should have to configure obscure constants like this but for the time being this will have to suffice.] Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1685/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: LD/SD o32 macro GAS fix updateMaciej W. Rozycki
I am about to commit: http://sourceware.org/ml/binutils/2010-10/msg00033.html that fixes a problem with the LD/SD macro currently implemented by GAS for the o32 ABI in an inconsistent way. This is best illustrated with a simple program, which I'm copying here from the message above for easier reference: $ cat ld.s ld $5,32767($4) ld $5,32768($4) This gets assebled into the following output: $ mips-linux-as -32 -mips3 -o ld.o ld.s $ mips-linux-objdump -d ld.o ld.o: file format elf32-tradbigmips Disassembly of section .text: 00000000 <.text>: 0: dc857fff ld a1,32767(a0) 4: 3c010001 lui at,0x1 8: 00810821 addu at,a0,at c: 8c258000 lw a1,-32768(at) 10: 8c268004 lw a2,-32764(at) ... Oops! The GAS fix makes the macro behave in a consistent way and pairs of LW/SW instructions to be output as appropriate regardless of the size of the offset associated with the address used. The machine instruction is still available, but to reach it macros have to be disabled first. This has a side effect of requiring the use of a machine-addressable memory operand. As some platforms require 64-bit operations for accesses to some I/O registers LD/SD instructions are used in a couple of places in Linux regardless of the ABI selected. Here's a fix for some pieces of code affected I've been able to track down. The fix should be backwards compatible with all supported binutils releases in existence and can be used as a reference for any other places or off-tree code. The use of the "R" constraint guarantees a machine-addressable operand. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1680/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Alchemy: fix build with SERIAL_8250=nManuel Lauss
In commit 7d172bfe ("Alchemy: Add UART PM methods") I introduced platform PM methods which call a function of the 8250 driver; this patch works around link failures when the kernel is built without 8250 support. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1737/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Rename mips_dma_cache_sync back to dma_cache_syncRalf Baechle
This fixes IP22 and IP28 build errors. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: MT: Fix typo in comment.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Swap serial console if ttyS1 was specified.Hauke Mehrtens
Some devices like the Netgear WGT634U are using ttyS1 for default console output. We should switch to that console if it was given in the kernel_args parameters. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Use sscanf for parsing mac addressHauke Mehrtens
Instead of writing own function for parsing the mac address we now use sscanf. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Fill values for b43 into SSB spromHauke Mehrtens
Fill the sprom with all available values from the nvram. Most of these new values are needed for the b43 or b43legacy driver. Parts of this patch have been in OpenWRT for a long time and were written by Michael Buesch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1846/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: BCM47xx: Do not read config from CFEHauke Mehrtens
The config options read out here are not stored in CFE but only in NVRAM on the devices. Remove reading from CFE and only access the NVRAM. Reading out CFE does not harm but is useless here. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> To: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: https://patchwork.linux-mips.org/patch/1845/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: FDT size is a be32Thomas Chou
The totalsize field was be32. And the reserve bootmem would cause failure. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> To: devicetree-discuss@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: David Daney <ddaney@caviumnetworks.com> Cc: Dezhong Diao <dediao@cisco.com> Patchwork: https://patchwork.linux-mips.org/patch/1838/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Fix CP0 COUNTER clockevent raceKevin Cernekee
Consider the following test case: write_c0_compare(read_c0_count()); Even if the counter doesn't increment during execution, this might not generate an interrupt until the counter wraps around. The CPU may perform the comparison each time CP0 COUNT increments, not when CP0 COMPARE is written. If mips_next_event() is called with a very small delta, and CP0 COUNT increments during the calculation of "cnt += delta", it is possible that CP0 COMPARE will be written with the current value of CP0 COUNT. If this is detected, the function should return -ETIME, to indicate that the interrupt might not have actually gotten scheduled. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1836/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Fix regression on BCM4710 processor detectionKevin Cernekee
BCM4710 uses the BMIPS32 core (like BCM6345), not the MIPS 4Kc core as was previously believed. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Tested-by: Alexandros C. Couloumbis <alex@ozo.com> Patchwork: https://patchwork.linux-mips.org/patch/1837/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: JZ4740: Fix pcm device nameLars-Peter Clausen
As part the ASoC multi-component patch (commit f0fba2ad) the jz4740 pcm driver was renamed to 'jz4740-pcm-audio'. Adjust the device name accordingly. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Separate two consecutive loads in memset.STony Wu
partial_fixup is used in noreorder block. Separating two consecutive loads can save one cycle on processors with GPR intrelock and can fix load-use on processors that need a load delay slot. Also do so for fwd_fixup. [Ralf: Only R2000/R3000 class processors are lacking the the load-user interlock and even some of those got it retrofitted. With R2000/R3000 being fairly uncommon these days the impact of this bug should be minor.] Signed-off-by: Tony Wu <tung7970@gmail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1768/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Send proper signal and siginfo on FP emulator faults.David Daney
We were unconditionally sending SIGBUS with an empty siginfo on FP emulator faults. This differs from what happens when real floating point hardware would get a fault. For most faults we need to send SIGSEGV with the faulting address filled in in the struct siginfo. Reported-by: Camm Maguire <camm@maguirefamily.org> Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Camm Maguire <camm@maguirefamily.org> Patchwork: https://patchwork.linux-mips.org/patch/1727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: AR7: Fix loops per jiffies on TNETD7200 devicesFlorian Fainelli
TNETD7200 run their CPU clock faster than the default CPU clock we assume. In order to have the correct loops per jiffies settings, initialize clocks right before setting mips_hpt_frequency. As a side effect, we can no longer use msleep in clocks.c which requires other parts of the kernel to be initialized, so replace these with mdelay. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: AR7: Fix double ar7_gpio_init declarationFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1748/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Rework GENERIC_HARDIRQS Kconfig.David Daney
Recent changes to CONFIG_GENERIC_HARDIRQS have caused us to start getting: warning: (SMP && SYS_SUPPORTS_SMP) selects IRQ_PER_CPU which has unmet direct dependencies (HAVE_GENERIC_HARDIRQS) Rearranging our Kconfig quiets the message. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/1757/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Alchemy: Add return value check for strict_strtoul()Yoichi Yuasa
arch/mips/alchemy/devboards/prom.c: In function 'prom_init': arch/mips/alchemy/devboards/prom.c:60: error: ignoring return value of 'strict_strtoul', declared with attribute warn_unused_result Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Loongson: Add return value check for strict_strtoul()Wu Zhangjin
cc1: warnings being treated as errors arch/mips/loongson/common/env.c: In function 'prom_init_env': arch/mips/loongson/common/env.c:49: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:50: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:51: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:52: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1762/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: VPE loader: Check vmalloc return value in vpe_openJesper Juhl
The return value of the vmalloc() call in arch/mips/kernel/vpe.c::vpe_open() is not checked, so we potentially store a null pointer in v->pbuffer. Add a check for a null return and then return -ENOMEM in that case. [Ralf: The check added by Jesper's original patch is where it logically should be. Adding it eleminated the need for the checks in a few other places, so I removed them. There still is a zillion of other things that need to be fixed in this file / API.] Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1747/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: compat: Don't clobber personality bits in 32-bit sys_personality().David Daney
If PER_LINUX32 has been set on a 32-bit kernel, only twiddle with the low-order personality bits, let the upper bits pass through. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: Camm Maguire <camm@maguirefamily.org> Patchwork: https://patchwork.linux-mips.org/patch/1751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Don't clobber personality high bits.David Daney
The high bits of current->personality carry settings that we don't want to clobber on each exec. Only clobber them if the lower bits that indicate either PER_LINUX or PER_LINUX32 are invalid. The clobbering prevents us from using useful bits like ADDR_NO_RANDOMIZE. Reported-by: Camm Maguire <camm@maguirefamily.org> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Camm Maguire <camm@maguirefamily.org> Patchwork: https://patchwork.linux-mips.org/patch/1750/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: jz4740: Fix section mismatch in prom.cLars-Peter Clausen
This patch fixes the following section mismatch: WARNING: arch/mips/built-in.o(.text+0xc): Section mismatch in reference from the function jz4740_init_cmdline() to the variable .init.data:arcs_cmdline While were at it, make jz4740_init_cmdline static as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: jz4740: qi_lb60: Fix gpio for the 6th row of the keyboard matrixLars-Peter Clausen
This patch fixes the gpio number for the 6th row of the keyboard matrix. (And fixes a typo in my name...) Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: stable@kernel.org Signed-off-by: https://patchwork.linux-mips.org/patch/1754/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Don't stomp on caller's ->regs[2] in copy_thread()Al Viro
We never needed that (->regs[2] is overwritten on return from syscall paths with return value of syscall, so storing it there early made no sense) and with new restart logics since d27240bf7e61d2656de18e158ec910a902030847 it has become really bad - we lose the original syscall number before the place where we decide that we might need a syscall restart. Note that for child we do need the assignment to regs[2] - it won't go through the normal return from syscall path. [Ralf: Issue found and reported by Lluís; initial investigations by me; bug finally found and patch by Al; testing by me and Lluís.] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Lluís Batlle i Rossell <viriketo@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: Swarm: Fix typo in symbol name: RTC_M4LT81 -> RTC_M41T81Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-11-26perf, arch: Cleanup perf-pmu init vs lockup-detectorPeter Zijlstra
The perf hardware pmu got initialized at various points in the boot, some before early_initcall() some after (notably arch_initcall). The problem is that the NMI lockup detector is ran from early_initcall() and expects the hardware pmu to be present. Sanitize this by moving all architecture hardware pmu implementations to initialize at early_initcall() and move the lockup detector to an explicit initcall right after that. Cc: paulus <paulus@samba.org> Cc: davem <davem@davemloft.net> Cc: Michael Cree <mcree@orcon.net.nz> Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290707759.2145.119.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-30Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: (82 commits) mtd: fix build error in m25p80.c mtd: Remove redundant mutex from mtd_blkdevs.c MTD: Fix wrong check register_blkdev return value Revert "mtd: cleanup Kconfig dependencies" mtd: cfi_cmdset_0002: make sector erase command variable mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one block2mtd: dubious assignment P4080/mtd: Fix the freescale lbc issue with 36bit mode P4080/eLBC: Make Freescale elbc interrupt common to elbc devices mtd: phram: use KBUILD_MODNAME mtd: OneNAND: S5PC110: Fix double call suspend & resume function mtd: nand: fix MTD_MODE_RAW writes jffs2: use kmemdup mtd: sm_ftl: cosmetic, use bool when possible mtd: r852: remove useless pci powerup/down from suspend/resume routines mtd: blktrans: fix a race vs kthread_stop mtd: blktrans: kill BKL mtd: allow to unload the mtdtrans module if its block devices aren't open ... Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
2010-10-30Merge branch 'master' of ↵David Woodhouse
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git Conflicts: drivers/mtd/mtd_blkdevs.c Merge Grant's device-tree bits so that we can apply the subsequent fixes. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-29ftrace/MIPS: Enable C Version of recordmcountWu Zhangjin
Selects HAVE_C_RECORDMCOUNT to use the C version of the recordmcount intead of the old Perl Version of recordmcount. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> LKML-Reference: <bb99009a9ac79d3f55a8c8bf1c8bd2bc0e1f160e.1288176026.git.wuzhangjin@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.David Daney
The TASK_SIZE macro should reflect the size of a user process virtual address space. Previously for 64-bit kernels, this was not the case. The immediate cause of pain was in hugetlbfs/inode.c:hugetlb_get_unmapped_area() where 32-bit processes trying to mmap a huge page would be served a page with an address outside of the 32-bit address range. But there are other uses of TASK_SIZE in the kernel as well that would like an accurate value. The new definition is nice because it now makes TASK_SIZE and TASK_SIZE_OF() yield the same value for any given process. For 32-bit kernels there should be no change, although I did factor out some code in asm/processor.h that became identical for the 32-bit and 64-bit cases. __UA_LIMIT is now set to ~((1 << SEGBITS) - 1) for 64-bit kernels. This should eliminate the possibility of getting a AddressErrorException in the kernel for addresses that pass the access_ok() test. With the patch applied, I can still run o32, n32 and n64 processes, and have an o32 shell fork/exec both n32 and n64 processes. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1701/
2010-10-29MIPS: Allow UserLocal on MIPS_R1 processorsKevin Cernekee
Some MIPS32R1 processors implement UserLocal (RDHWR $29) to accelerate programs that make extensive use of thread-local storage. Therefore, setting up the HWRENA register should not depend on cpu_has_mips_r2. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
2010-10-29MIPS: Honor L2 bypass bitKevin Cernekee
On many of the newer MIPS32 cores, CP0 CONFIG2 bit 12 (L2B) indicates that the L2 cache is disabled and therefore Linux should not attempt to use it. [Ralf: Moved the code added by Kevin's original patch into a separate function that can easily be replaced for platforms that need more a different probe.] Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/1723/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: Add BMIPS CP0 register definitionsKevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Tested-by: Florian Fainelli <ffainelli@freebox.fr> Patchwork: https://patchwork.linux-mips.org/patch/1708/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2010-10-29MIPS: Add BMIPS processor types to KconfigKevin Cernekee
[v2: add "VIPER" marketing name for BMIPS4350] Add processor feature definitions for BMIPS3300, BMIPS4350, BMIPS4380, and BMIPS5000. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Tested-by: Florian Fainelli <ffainelli@freebox.fr> Patchwork: https://patchwork.linux-mips.org/patch/1716/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2010-10-29MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC codeKevin Cernekee
BMIPS processor cores are used in 50+ different chipsets spread across 5+ product lines. In many cases the chipsets do not share the same peripheral register layouts, the same register blocks, the same interrupt controllers, the same memory maps, or much of anything else. But, across radically different SoCs that share nothing more than the same BMIPS CPU, a few things are still mostly constant: SMP operations Access to performance counters DMA cache coherency quirks Cache and memory bus configuration So, it makes sense to treat each BMIPS processor type as a generic "building block," rather than tying it to a specific SoC. This makes it easier to support a large number of BMIPS-based chipsets without unnecessary duplication of code, and provides the infrastructure needed to support BMIPS-proprietary features. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Tested-by: Florian Fainelli <ffainelli@freebox.fr> Patchwork: https://patchwork.linux-mips.org/patch/1706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2010-10-29MIPS: Add support for hardware performance events (mipsxx)Deng-Cheng Zhu
This patch adds the mipsxx Perf-events support based on the skeleton. Generic hardware events and cache events are now fully implemented for the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as R10000/SB1), the generic hardware event tables and cache event tables need to be filled out. To support other CPUs which have different PMU than mipsxx, such as RM9000 and LOONGSON2, the additional files perf_event_$cpu.c need to be created. Raw event is an important part of Perf-events. It helps the user collect performance data for events that are not listed as the generic hardware events and cache events but ARE supported by the CPU's PMU. This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to use it, please refer to processor core software user's manual and the comments for mipsxx_pmu_map_raw_event() for more details. Please note that this is a "precise" implementation, which means the kernel will check whether the requested raw events are supported by this CPU and which hardware counters can be assigned for them. To test the functionality of Perf-event, you may want to compile the tool "perf" for your MIPS platform. You can refer to the following URL: http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile for your libs, includes, etc. In case you encounter the boot failure in SMVP kernel on multi-threading CPUs, you may take a look at: http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020 Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1689/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> create mode 100644 arch/mips/kernel/perf_event_mipsxx.c
2010-10-29MIPS: Perf-events: Add callchain supportDeng-Cheng Zhu
Adds callchain support for MIPS Perf-events. For more info on this feature, please refer to tools/perf/Documentation/perf-report.txt and tools/perf/design.txt. Currently userspace callchain data is not recorded, because we do not have a safe way to do this. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1690/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: add support for hardware performance events (skeleton)Deng-Cheng Zhu
This patch provides the skeleton of the HW perf event support. To enable this feature, we can not choose the SMTC kernel; Oprofile should be disabled; kernel performance events be selected. Then we can enable it in Kernel type menu. Oprofile for MIPS platforms initializes irq at arch init time. Currently we do not change this logic to allow PMU reservation. If a platform has EIC, we can use the irq base and perf counter irq offset defines for the interrupt controller in specific init_hw_perf_events(). Based on this skeleton patch, the 3 different kinds of MIPS PMU, namely, mipsxx/loongson2/rm9000, can be supported by adding corresponding lower level C files at the bottom. The suggested names of these files are perf_event_mipsxx.c/perf_event_loongson2.c/perf_event_rm9000.c. So, for example, we can do this by adding "#include perf_event_mipsxx.c" at the bottom of perf_event.c. In addition, PMUs with 64bit counters are also considered in this patch. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1688/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: add support for software performance eventsDeng-Cheng Zhu
Software events are required as part of the measurable stuff by the Linux performance counter subsystem. Here is the list of events added by this patch: PERF_COUNT_SW_PAGE_FAULTS PERF_COUNT_SW_PAGE_FAULTS_MIN PERF_COUNT_SW_PAGE_FAULTS_MAJ PERF_COUNT_SW_ALIGNMENT_FAULTS PERF_COUNT_SW_EMULATION_FAULTS Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Acked-by: David Daney <ddaney@caviumnetworks.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Patchwork: https://patchwork.linux-mips.org/patch/1686/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: define local_xchg from xchg_local to atomic_long_xchgDeng-Cheng Zhu
Perf-events is now using local_t helper functions internally. There is a use of local_xchg(). On MIPS, this is defined to xchg_local() which is missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h to atomic_long_xchg(). Then Perf-events can pass the build. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com> To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Cc: ddaney@caviumnetworks.com Cc: matt@console-pimps.org Patchwork: https://patchwork.linux-mips.org/patch/1687/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: AR7: Add support for Titan (TNETV10xx) SoC variantFlorian Fainelli
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by: Xin Zhen <xlonestar2000@aim.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-10-29MIPS: AR7: Initialize GPIO earlierFlorian Fainelli
In order to detect the Titan variant, we must initialize GPIOs earlier since detection relies on some GPIO values to be set. Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1562/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---