summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2016-05-13MIPS: Loongson1B: Some updates/fixes for LS1BKelvin Cheung
- Add DMA device - Add NAND device - Add GPIO device - Add LED device - Update the defconfig and rename it to loongson1b_defconfig - Fix ioremap size - Other minor fixes Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-mtd@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/13033/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Fix interrupt and remove needless propertiesJaedon Shin
Fixes wrong bcm7425 SATA AHCI hardware interrupt property value with periph_intc and SATA PHY unit address, and removes needless brcm,broken-{ncq,phy} properties what are not used anywhere. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13017/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add support UART, I2C, SATA deviceJaedon Shin
Add UART, I2C, SATA device tree nodes on Broadcom BCM7xxx MIPS-based platforms. Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Dragan Stancevic <dragan.stancevic@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/13016/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Kconfig: replace OPROFILE=n to !OPROFILEYang Shi
In Kconfig "=n" is not correct syntax, "!" is the preferred way for false-positive expression. Signed-off-by: Yang Shi <yang.shi@windriver.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12572/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: KASLR: Print relocation Information on bootMatt Redfearn
When debugging a relocated kernel, the addresses of the relocated symbols and the offset applied is essential information. If the kernel is compiled with debugging information, then print this information during bootup using the same function as the panic notifier. [ralf@linux-mips.org: Fixed spelling mistake pointed out by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>.] Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12989/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLEMatt Redfearn
This patch adds KASLR to the MIPS kernel. Entropy is derived from the banner, which will change every build and random_get_entropy() which should provide additional runtime entropy. Additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from its link address (PHYSICAL_START). Because relocation happens so early in the kernel boot, the amount of physical memory has not yet been determined. This means the only way to limit relocation within the available memory is via Kconfig. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Introduce plat_get_fdt a platform API to retrieve the FDTMatt Redfearn
Early access to the kernel command line requires early access to the FDT for platforms which pass the command line within the device tree. There was no common way to retrieve the location of the FDT without incurring side effects, such as plat_mem_setup which, on Malta at least, initializes a bunch of other stuff. This patch adds plat_get_ftd() for IMG platforms. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12988/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add CONFIG_RELOCATABLE Kconfig optionMatt Redfearn
Add option to KConfig to enable the kernel to relocate itself at runtime. Relocation is supported R2 and later of the MIPS architecture, 32bit and 64bit. The platform is also required to provide support through plat_get_fdt() added in a later patch. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12987/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: bootmem: When relocatable, free memory below kernelMatt Redfearn
The kernel reserves all memory before the _end symbol as bootmem, however, once the kernel can be relocated elsewhere in memory this may result in a large amount of wasted memory. The assumption is that the memory between the link and relocated address of the kernel may be released back to the available memory pool. Memory statistics for a Malta with the kernel relocating by 16Mb, without the patch: Memory: 105952K/131072K available (4604K kernel code, 242K rwdata, 892K rodata, 1280K init, 183K bss, 25120K reserved, 0K cma-reserved) And with the patch: Memory: 122336K/131072K available (4604K kernel code, 242K rwdata, 892K rodata, 1280K init, 183K bss, 8736K reserved, 0K cma-reserved) The 16Mb offset is removed from the reserved region and added back to the available region. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com> Cc: Jaedon Shin <jaedon.shin@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12986/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Call relocate_kernel if CONFIG_RELOCATABLE=yMatt Redfearn
If CONFIG_RELOCATABLE is enabled, call relocate_kernel. This function will return the entry point of the relocated kernel if copy/relocate is sucessful or the original entry point if not. The stack pointer must then be pointed into the new image. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12984/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Kernel: Add relocate.cMatt Redfearn
arch/mips/kernel/relocate.c contains the functions necessary to relocate the kernel elsewhere in memory The kernel makes a copy of itself at the new address. It uses the relocation table inserted by the relocs tool to fix symbol references within the new image. If copy/relocation is sucessful then the entry point of the new kernel is returned, otherwise fall back to starting the kernel in place. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12985/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Generate relocation table when CONFIG_RELOCATABLEMatt Redfearn
When CONFIG_RELOCATABLE is enabled (added in later patch) add --emit-relocs to vmlinux LDFLAGS so that fully linked vmlinux contains relocation information. Run the previously added relocs tool to fill in the .data.relocs section of vmlinux with a table of relocations. The relocs tool will also remove (mark as 0 length) the relocation sections added to vmlinux. When vmlinux is passed to the boot makefile for conversion into a boot image the now empty relocation sections will be removed and the populated relocation table will be included in the binary image. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12983/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Reserve space for relocation tableMatt Redfearn
When CONFIG_RELOCATABLE is enabled, add a new section in the memory map to be filled with relocation data. CONFIG_RELOCATION_TABLE_SIZE allows the amount of space reserved to be adjusted if necessary. The relocs tool will populate this reserved space with relocation information. The space is reserved within the elf by filling it with 0's, and an invalid entry is left at the start of the space such that kernel relocation will be aborted if the table is empty. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: David Daney <ddaney@caviumnetworks.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12982/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: tools: Build relocs toolMatt Redfearn
Build the relocs tool as part of the kbuild Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12980/ Patchwork: https://patchwork.linux-mips.org/patch/13242/ Patchwork: https://patchwork.linux-mips.org/patch/13233/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: tools: Add relocs toolMatt Redfearn
This tool is based on the x86/boot/tools/relocs tool. It parses the relocations present in the vmlinux elf file, building a table of relocations that will be necessary to run the kernel from an address other than its link address. This table is inserted into the vmlinux elf, in the .data.relocs section. The table is subsequently used by the code in arch/mips/kernel/relocate.c (added later) to relocate the kernel. The tool, by default, also marks all relocation sections as 0 length. This is due to objcopy currently being unable to handle copying the relocations between 64 and 32 bit elf files as is done when building a 64 bit kernel. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: kernel-hardening@lists.openwall.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: seccomp: Support compat with both O32 and N32Matt Redfearn
Previously the seccomp would only support strict mode on O32 userland programs when the kernel had support for both O32 and N32 ABIs. Remove kludge and support both ABIs. With this patch in place, the seccomp_bpf self test now passes global.mode_strict_support with N32 userland. Suggested-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: IMG-MIPSLinuxKerneldevelopers@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12917/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: scall: Handle seccomp filters which redirect syscallsMatt Redfearn
Commit d218af78492a ("MIPS: scall: Always run the seccomp syscall filters") modified the syscall code to always call the seccomp filters, but missed the case where a filter may redirect the syscall, as revealed by the seccomp_bpf self test. The syscall path now restores the syscall from the stack after the filter rather than saving it locally. Syscall number checking and syscall function table lookup is done after the filter may have run such that redirected syscalls are also checked, and executed. The regular path of syscall number checking and pointer lookup is also made more consistent between ABIs with scall64-64.S being the reference. With this patch in place, the seccomp_bpf self test now passes TRACE_syscall.syscall_redirected and TRACE_syscall.syscall_dropped on all MIPS ABIs. Fixes: d218af78492a ("MIPS: scall: Always run the seccomp syscall filters") Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Eric B Munson <emunson@akamai.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: IMG-MIPSLinuxKerneldevelopers@imgtec.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12916/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support sending SIG_SYS to 32bit userspace from 64bit kernelMatt Redfearn
The seccomp_bpf self test revealed that a 64bit kernel delivered an invalid SIG_SYS to a 32bit userspace, because it was falling into the default of the switch statement. Add a case to handle delivering the signal. With this patch, the seccomp_bpf self test now passes the TRAP.handler case with O32 and N32 userlands. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Amanieu d'Antras <amanieu@gmail.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: IMG-MIPSLinuxKerneldevelopers@imgtec.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12915/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13pinctrl/lantiq: update devicetree binding in dts fileMartin Schiller
This patch updates the compatible string in the easy50712.dts file to the new "lantiq,danube-pinctrl". Signed-off-by: Martin Schiller <mschiller@tdt.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: robh+dt@kernel.org Cc: pawel.moll@arm.com Cc: mark.rutland@arm.com Cc: ijc+devicetree@hellion.org.uk Cc: galak@codeaurora.org Cc: john@phrozen.org Cc: hauke@hauke-m.de Cc: jogo@openwrt.org Cc: daniel.schwierzeck@gmail.com Cc: linux-gpio@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11589/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: defconfigs: Remove CONFIG_IPV6_PRIVACYBorislav Petkov
Option is long gone, see 5d9efa7ee99e ("ipv6: Remove privacy config option.") Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/12919/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Use generic clkdev.h headerStephen Boyd
The generic header file is equivalent to the MIPS one, so use the generic one instead. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: linux-kernel@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12261/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Sync icache & dcache in set_pte_atPaul Burton
It's possible for pages to become visible prior to update_mmu_cache running if a thread within the same address space preempts the current thread or runs simultaneously on another CPU. That is, the following scenario is possible: CPU0 CPU1 write to page flush_dcache_page flush_icache_page set_pte_at map page update_mmu_cache If CPU1 maps the page in between CPU0's set_pte_at, which marks it valid & visible, and update_mmu_cache where the dcache flush occurs then CPU1s icache will fill from stale data (unless it fills from the dcache, in which case all is good, but most MIPS CPUs don't have this property). Commit 4d46a67a3eb8 ("MIPS: Fix race condition in lazy cache flushing.") attempted to fix that by performing the dcache flush in flush_icache_page such that it occurs before the set_pte_at call makes the page visible. However it has the problem that not all code that writes to pages exposed to userland call flush_icache_page. There are many callers of set_pte_at under mm/ and only 2 of them do call flush_icache_page. Thus the race window between a page becoming visible & being coherent between the icache & dcache remains open in some cases. To illustrate some of the cases, a WARN was added to __update_cache with this patch applied that triggered in cases where a page about to be flushed from the dcache was not the last page provided to flush_icache_page. That is, backtraces were obtained for cases in which the race window is left open without this patch. The 2 standout examples follow. When forking a process: [ 15.271842] [<80417630>] __update_cache+0xcc/0x188 [ 15.277274] [<80530394>] copy_page_range+0x56c/0x6ac [ 15.282861] [<8042936c>] copy_process.part.54+0xd40/0x17ac [ 15.289028] [<80429f80>] do_fork+0xe4/0x420 [ 15.293747] [<80413808>] handle_sys+0x128/0x14c When exec'ing an ELF binary: [ 14.445964] [<80417630>] __update_cache+0xcc/0x188 [ 14.451369] [<80538d88>] move_page_tables+0x414/0x498 [ 14.457075] [<8055d848>] setup_arg_pages+0x220/0x318 [ 14.462685] [<805b0f38>] load_elf_binary+0x530/0x12a0 [ 14.468374] [<8055ec3c>] search_binary_handler+0xbc/0x214 [ 14.474444] [<8055f6c0>] do_execveat_common+0x43c/0x67c [ 14.480324] [<8055f938>] do_execve+0x38/0x44 [ 14.485137] [<80413808>] handle_sys+0x128/0x14c These code paths write into a page, call flush_dcache_page then call set_pte_at without flush_icache_page inbetween. The end result is that the icache can become corrupted & userland processes may execute unexpected or invalid code, typically resulting in a reserved instruction exception, a trap or a segfault. Fix this race condition fully by performing any cache maintenance required to keep the icache & dcache in sync in set_pte_at, before the page is made valid. This has the added bonus of ensuring the cache maintenance always happens in one location, rather than being duplicated in flush_icache_page & update_mmu_cache. It also matches the way other architectures solve the same problem (see arm, ia64 & powerpc). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reported-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Fixes: 4d46a67a3eb8 ("MIPS: Fix race condition in lazy cache flushing.") Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: David Daney <david.daney@cavium.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable <stable@vger.kernel.org> # v4.1+ Patchwork: https://patchwork.linux-mips.org/patch/12722/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Handle highmem pages in __update_cachePaul Burton
The following patch will expose __update_cache to highmem pages. Handle them by mapping them in for the duration of the cache maintenance, just like in __flush_dcache_page. The code for that isn't shared because we need the page address in __update_cache so sharing became messy. Given that the entirity is an extra 5 lines, just duplicate it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable <stable@vger.kernel.org> # v4.1+ Patchwork: https://patchwork.linux-mips.org/patch/12721/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Flush highmem pages in __flush_dcache_pagePaul Burton
When flush_dcache_page is called on an executable page, that page is about to be provided to userland & we can presume that the icache contains no valid entries for its address range. However if the icache does not fill from the dcache then we cannot presume that the pages content has been written back as far as the memories that the dcache will fill from (ie. L2 or further out). This was being done for lowmem pages, but not for highmem which can lead to icache corruption. Fix this by mapping highmem pages & flushing their content from the dcache in __flush_dcache_page before providing the page to userland, just as is done for lowmem pages. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12720/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Flush dcache for flush_kernel_dcache_pagePaul Burton
The flush_kernel_dcache_page function was previously essentially a nop. This is incorrect for MIPS, where if a page has been modified & either it aliases or it's executable & the icache doesn't fill from dcache then the content needs to be written back from dcache to the next level of the cache hierarchy (which is shared with the icache). Implement this by simply calling flush_dcache_page, treating this kmapped cache flush function (flush_kernel_dcache_page) exactly the same as its non-kmapped counterpart (flush_dcache_page). Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars Persson <lars.persson@axis.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12719/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: OCTEON: cavium_octeon_defconfig: enable all OCTEON SoC driversAaro Koskinen
Some drivers for SoC provided functionality are missing. Enable to those in defconfig to provide better build/testing coverage. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12750/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Detect DSP v3 supportZubair Lutfullah Kakakhel
DSPv3 is supported on all MIPSr6 systems which indicate support for DSPv2. This doesn't require any changes to the kernel's handling of DSP resources. The patch is to detect support and indicate it in /proc/cpuinfo DSP v3 introduces a new instruction BPOSGE32C Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12918/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: cpu: Convert MIPS_CPU_* defs to (1ull << x)James Hogan
The MIPS_CPU_* definitions have now filled the first 32-bits, and are getting longer since they're written in hex without zero padding. Adding my 8 extra MIPS_CPU_* definitions which I haven't upstreamed yet this is getting increasingly ugly as the comments get shifted progressively to the right. Its also error prone, and I've seen this cause mistakes on 3 separate occasions now, not helped by it being a conflict hotspot. Convert all the MIPS_CPU_* definitions to the form (1ull << x). Humans are better at incrementing than shifting. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10045/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: cpu: Alter MIPS_CPU_* definitions to fill gapJames Hogan
The MIPS_CPU_* definitions accidentally missed bits 27..30 when MIPS_CPU_EVA was added, and further definitions have continued from there. Shift all the definitions since MIPS_CPU_EVA right by 4 so there are no gaps. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10044/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: BMIPS: Add early CPU initialization codeFlorian Fainelli
Port the stblinux-3.3 code to perform a bunch of CPU-specific initialization, make it compatible with run-time detection of the CPU, and unroll the brcmstb-specific macros: BDEV_RB(), BDEV_UNSET. The "pref 30" disabling is done as a quirk. This is a preliminary change to allow the use of the "rotr" instruction gated by cpu_has_rixi. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jon.fraser@broadcom.com Cc: pgynther@google.com Cc: paul.burton@imgtec.com Cc: ddaney.cavm@gmail.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12504/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: math-emu: dsemul: Remove an unused bit in ADDIUPC emulationMaciej W. Rozycki
Avoid a reader's confusion, as the calculation is correct either way. Signed-off-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12283/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Octeon: Add Octeon III CN7xxx interface detectionZubair Lutfullah Kakakhel
Add basic CN7XXX interface detection. This allows the kernel to boot with ethernet working as it initializes the ethernet ports with SGMII instead of defaulting to RGMII routines. Tested on the utm8 from Rhino Labs with a CN7130. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Cc: janne.huttunen@nokia.com Cc: aaro.koskinen@nokia.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12376/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Make flush_threadRalf Baechle
Avoids function calls to an empty function. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support R_MIPS_PC{16,21,26} rel-style relocsPaul Burton
MIPS32 code uses rel-style relocs, and MIPS32r6 modules may include R_MIPS_PC16, R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these relocations in order to load MIPS32r6 kernel modules. This patch adds such support, which is similar to the rela-style support in module-rela.c but making use of the implicit addend from the instruction encoding. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12435/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Support R_MIPS_PC{21,26} rela-style relocsPaul Burton
MIPS64 code uses rela-style relocs, and MIPS64r6 modules may include the new R_MIPS_PC21 & R_MIPS_PC26 relocations. We thus need to support these relocations in order to load MIPS64r6 kernel modules. They are similar to the existing R_MIPS_PC16 relocation but applying to a wider field. Implement support for them by genericising the existing R_MIPS_PC16 implementation such that it can be used for different field widths, and calling it for all 3 reloc types. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Kees Cook <keescook@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Steven J. Hill <sjhill@realitydiluted.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12434/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: module: Make consistent use of pr_*()Steven J. Hill
The module relocation handling code has inconsistent use of printk() and pr_*() functions. Convert printk() calls to use pr_err() and pr_warn(). [paul.burton@imgtec.com: Do the same thing in module.c] Signed-off-by: Steven J. Hill <sjhill@realitydiluted.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Andrey Konovalov <adech.fo@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12433/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Probe the M6250 CPUPaul Burton
Support probing the M6250 CPU now that cases for handling it have been added where required in the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12375/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add M6250 cases to CPU switch statementsPaul Burton
Add casses supporting the M6250 CPU to various switch statements in the core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Maciej W. Rozycki <macro@codesourcery.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12374/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add M6250 PRID & cpu_type_enum valuesPaul Burton
Define the processor ID for the M6250 CPU and add a value to the enum cpu_type_enum for the core. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12373/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Probe the P6600 corePaul Burton
Support probing the P6600 core now that cases for handling it have been added throughout the core MIPS kernel code. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12344/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add P6600 cases to CPU switch statementsPaul Burton
Add cases supporting the P6600 CPU to various switch statements in core MIPS kernel code that define behaviour dependent upon the CPU. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@imgtec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Petri Gynther <pgynther@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12343/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: Add P6600 PRID & cpu_type_enum valuesPaul Burton
Define the processor ID for the P6600 core and add a value to the enum cpu_type_enum for the core. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12342/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: <asm/cpu.h>: Reformat to 80 columns.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: SEAD3 can support MIPS32r6 CPUsPaul Burton
There are CPUs/bitfiles available for use with SEAD3 boards which implement release 6 of the MIPS architecture. Allow building the kernel for such a system. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12372/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Stop printing EJTAG exceptions to UARTPaul Burton
When CONFIG_MIPS_CPS_NS16550 is enabled, some register state is dumped to the UART when an exception is taken via the BEV on secondary cores. EJTAG exceptions are architecturally expected to be handled by the BEV even when Status.BEV is 0. This effectively means that if userland executes an sdbbp instruction on a secondary core then the kernel dumps register state to the UART even though the exception is perfectly normal & expected. Prevent this by simply not dumping information to the UART for EJTAG exceptions. Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12341/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Add nothreads kernel parameterPaul Burton
When debugging a new system or core it can be useful to disable the use of multithreading. Introduce a "nothreads" kernel command line parameter that can be set in order to do so. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12340/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Support MIPSr6 Virtual ProcessorsPaul Burton
Introduce support for bringing up Virtual Processors in MIPSr6 systems as CPUs, much like their VPE parallel from the now-deprecated MT ASE. The existing mips_cps_boot_vpes function fits the MIPSr6 architecture pretty well - it can now simply write the mask of running VPs to the VC_RUN register, rather than looping through each & starting or stopping as appropriate as is done for VPEs from the MT ASE. Thus the VP support is in general an extension & simplification of the existing MT ASE VPE (aka SMVP) support. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12339/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Skip core setup if coherentPaul Burton
In preparation for supporting MIPSr6 multithreading (ie. VPs) which will begin execution from the core reset vector, skip core level setup if the core is already coherent. This is never the case when a core is first started, since boot_core explicitly clears the cores GCR_Cx_COH_EN register, and always the case when secondary VPs start since the first VP to start will have enabled coherence after initialising the core & its caches. One notable side effect of this patch is that eva_init gets called slightly earlier, prior to mips_cps_core_init rather than after it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12338/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Pull boot config retrieval out of mips_cps_boot_vpesPaul Burton
The mips_cps_boot_vpes function previously included code to retrieve pointers to the core & VPE boot configuration structs. These structures were used both by mips_cps_boot_vpes and by its mips_cps_core_entry callsite. In preparation for skipping the call to mips_cps_boot_vpes on some invocations of mips_cps_core_entry, pull the calculation of those pointers out into a separate function such that it can continue to be shared. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12337/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-05-13MIPS: smp-cps: Pull cache init into a functionPaul Burton
In preparation for further modifications to mips_cps_core_entry, pull the L1 cache initialisation out into a separate function. This both makes the code in mips_cps_core_entry read more clearly, particularly when modifying it, and shortens it which will become important as code is added that needs to continue to fit within the reset vector. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12336/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-02 14:30:02 +0000