summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2008-11-14CRED: Separate task security context from task_structDavid Howells
Separate the task security context from task_struct. At this point, the security data is temporarily embedded in the task_struct with two pointers pointing to it. Note that the Alpha arch is altered as it refers to (E)UID and (E)GID in entry.S via asm-offsets. With comment fixes Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14CRED: Wrap task credential accesses in the MIPS archDavid Howells
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: James Morris <jmorris@namei.org>
2008-11-11sched: rename SCHED_NO_NO_OMIT_FRAME_POINTER => SCHED_OMIT_FRAME_POINTERIngo Molnar
Impact: cleanup, change .config option name We had this ugly config name for a long time for hysteric raisons. Rename it to a saner name. We still cannot get rid of it completely, until /proc/<pid>/stack usage replaces WCHAN usage for good. We'll be able to do that in the v2.6.29/v2.6.30 timeframe. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-30CHAR: Delete old and now unused M48T35 RTC driver for SGI IP27.Ralf Baechle
It was only used by this one SGI platform which recently was converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30CHAR: Delete old and now unused DS1286 driver.Ralf Baechle
It was only used by two SGI platforms which recently were converted to RTC_LIB and with RTC_LIB enabled the legacy drivers are no more selectable. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30MIPS: Sort out CPU type to name translation.Ralf Baechle
As noticed by David Daney <ddaney@caviumnetworks.com>, the old long switch statement did not comply with the Linux C coding style. It was also yet another place of code to be changed when adding a new processor type leading to annoying bugs for example in /proc/cpuinfo. Fixed by moving the setting of the CPU type string into the core of the probing code and a few BUG_ON() test to ensure the CPU probing code indeed did its job and removing multiple now redundant tests. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Use the new byteorder headersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Probe for watch registers on cores of all vendors, not just MTI.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: David Daney <ddaney@caviumnetworks.com>
2008-10-30MIPS: Switch FPU emulator trap to BREAK instruction.Ralf Baechle
Arguably using the address error handler has always been ugly. But with processors that handle unaligned loads and stores in hardware the current mechanism ceases to work so switch it to a BREAK instruction and allocate break code 514 to the FPU emulator. Yoichi Yuasa provided a build fix for CONFIG_BUG=n. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
2008-10-30MIPS: SMP: Do not initialize __cpu_number_map/__cpu_logical_map for CPU 0.Ralf Baechle
A system isn't necessarily booted on physical processor 0 as this code assumes. Also the array happens to be allocated in .bss so it's zero initialized anyway. Systems which need to override this can do so in their mp_ops->smp_setup() method. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Consider value of c0_ebase when computing value of exception base.David Daney
It just so happens to be zero on all currently supported systems so this hasn't bitten yet ... [Ralf: Original patch from Cavium; handling of set_uncached_handler() and de-ifdef'ed trap_init() implementation by me.] Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: Clean up MIPSxx-optimized bitop functionsRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: New feature test macro cpu_has_mips_rRalf Baechle
cpu_has_mips_r is true if a processor is MIPS32 or MIPS64, any architecture revision. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: RBTX4927: Add GPIO-LED supportAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-30MIPS: TXx9: Fix RBTX4939 ethernet address initializationAtsushi Nemoto
Fix location of ethernet adddress when booted from external ROM. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: lemote/lm2e: Added io_map_base to pci controllerZhang Le
Signed-off-by: Zhang Le <r0bertz@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: Make firmware parameter passing more robustGeert Uytterhoeven
When booting Linux on a txx9 board with VxWorks boot loader, it crashes in prom_getenv(), as VxWorks doesn't pass firmware parameters in a0-a3 (in my case, the actual leftover values in these registers were 0x80002000, 0x80001fe0, 0x2000, and 0x20). Make the parsing of argc, argv, and envp a bit more robust by checking if argc is a number below CKSEG0, and argv/envp point to CKSEG0. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Remove unnecessary define and cleanup comments, etc.Shinya Kuribayashi
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Extract ll_emma2rh_* functionsShinya Kuribayashi
These functions are completely ineffective. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Markeins: Remove runtime debug printsShinya Kuribayashi
Remove runtime db_* macros as we don't need them any more. In general, such helpers are useful for initial porting, but once approved, they are not indispensable. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Fold arch/mips/emma/{common,markeins}/irq*.c into markeins/irq.cShinya Kuribayashi
Current EMMA2RH irq code is mess. Before cleaning it up, gather them in one place as a first step. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_gpio_irq_baseShinya Kuribayashi
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sw_irq_baseShinya Kuribayashi
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_irq_base global variableShinya Kuribayashi
Let's use immediate value, instead. This also saves memory footprint, and probably a little bit faster. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA2RH: Remove emma2rh_sync on read operationShinya Kuribayashi
It's totally a waste of CPU cycles. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move <asm/emma2rh> to <asm/emma> dirShinya Kuribayashi
We'll put all EMMA related headers there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Move arch/mips/emma2rh/ into arch/mips/emma/Shinya Kuribayashi
git mv arch/mips/{emma2rh,emma} and fixups Makefiles. We'll put all NEC EMMA series based machines there in the future. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: EMMA: Kconfig reorganizationShinya Kuribayashi
- Move EMMA related stuff into arch/mips/emma/Kconfig - Create CONFIG_SOC_EMMA* to handle more EMMA SoCs effectively - Rename CONFIG_MARKEINS into CONFIG_NEC_MARKEINS Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add CONFIG_CPU_R5500 for NEC VR5500 series processorsShinya Kuribayashi
We already have sufficient infrastructure to support VR5500 and VR5500A series processors. Here's a Makefile support to make it selectable by ports, and enable it for NEC EMMA2RH Markeins board. This patch also fixes a confused target help, and adds 1Gb PageMask bits supported by VR5500 and its variants. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Disable the right devicePhil Sutter
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Add support for NXP PNX833x (STB222/5) into linux kernelDaniel Laird
The following patch add support for the NXP PNX833x SOC. More specifically it adds support for the STB222/5 variant. It fixes the vectored interrupt issue. Signed-off-by: daniel.j.laird <daniel.j.laird@nxp.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: CONFIG_TOSHIBA_RBTX4939 spellingGeert Uytterhoeven
Fix a typo in the comment for the TOSHIBA_RBTX4939 config option Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorYoichi Yuasa
In file included from include/linux/ptrace.h:49, from arch/mips/kernel/kgdb.c:25: /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:123: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:124: error: expected declaration specifiers or '...' before '__s64' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:126: error: expected declaration specifiers or '...' before '__u32' /home/yuasa/src/linux/test/mips/linux/arch/mips/include/asm/ptrace.h:127: error: expected declaration specifiers or '...' before '__u32' make[1]: *** [arch/mips/kernel/kgdb.o] Error 1 Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: IP22: ip22-int.c header file weeding.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: IP22: Small cleanupsDmitri Vorobiev
The following functions disable_local1_irq() disable_local2_irq() disable_local3_irq() are needlessly defined global, so make them static. While at it, fix a whitespace error in the same file. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RBTX4939: Add smc91x supportAtsushi Nemoto
Add smc91x platform device to RBTX4939 board and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: TXx9: 7 segment LED supportAtsushi Nemoto
Add sysfs interface for 7 segment LED and implement access routine for RBTX4939. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Alchemy: Wire up SD controller on DB/PB1200 boards.Manuel Lauss
Add au1xmmc platform data for PB1200/DB1200 boards and wire up the 2 SD controllers for them. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Set gpio interrupt status and level for CompactFlashFlorian Fainelli
This patch sets the correct interrupt status and level in order to get the CompactFlash adapter working. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: RB532: Fix build errorAdrian Bunk
mips/pci/fixup-rc32434.c must #include <asm/mach-rc32434/irq.h> This patch fixes the following compile error caused by commit 606a083b1e1a357cb66454e4581b80f1a67d8368 (MIPS: RB532: Cleanup the headers again): <-- snip --> ... CC arch/mips/pci/fixup-rc32434.o arch/mips/pci/fixup-rc32434.c: In function 'pcibios_map_irq': arch/mips/pci/fixup-rc32434.c:46: error: 'GROUP4_IRQ_BASE' undeclared (first use in this function) arch/mips/pci/fixup-rc32434.c:46: error: (Each undeclared identifier is reported only once arch/mips/pci/fixup-rc32434.c:46: error: for each function it appears in.) make[2]: *** [arch/mips/pci/fixup-rc32434.o] Error 1 <-- snip --> A virtually identical patch was also submitted by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix KGDB build errorDavid Daney
<asm/ptrace.h> is exported to userland so can't include <linux/ptrace.h>, so replace the C99 types with their basic C type equivalents. Bug originally reported and initial patch by Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Set ENOSYS to errno on illegal system call number for syscall(2)Atsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Set positive error number to errno on illegal_syscallAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: SMP: Don't reenable interrupts in stop_this_cpu; use WAIT instruction.Ralf Baechle
Noticed by Anirban Sinha <ASinha@zeugmasystems.com>; patch by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Don't unmap the memory for dma_sync*.David Daney
We were getting away with this for so long only because the only platform with a non-empty plat_unmap_dma_mem() doesn't call dma_sync_sg_for_cpu() and dma_sync_sg_for_device() from its commonly used drivers. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix debugfs_create_*'s error checking method for mips/kernel/Zhaolei
debugfs_create_*() returns NULL on error. Make its callers return -ENODEV on error. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-27MIPS: Fix debugfs_create_*'s error checking method for arch/mips/math-emu/Zhaolei
debugfs_create_*() returns NULL on error. Make its caller debugfs_fpuemu return -ENODEV on error. Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-10-23TXx9: Add TX4938 ATA support (v3)Atsushi Nemoto
Add a helper routine to register tx4938ide driver and use it on RBTX4938 board. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile: (21 commits) OProfile: Fix buffer synchronization for IBS oprofile: hotplug cpu fix oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in arch/x86/oprofile/* oprofile: fixing whitespaces in drivers/oprofile/* x86/oprofile: add the logic for enabling additional IBS bits x86/oprofile: reordering functions in nmi_int.c x86/oprofile: removing unused function parameter in add_ibs_begin() oprofile: more whitespace fixes oprofile: whitespace fixes OProfile: Rename IBS sysfs dir into "ibs_op" OProfile: Rework string handling in setup_ibs_files() OProfile: Rework oprofile_add_ibs_sample() function oprofile: discover counters for op ppro too oprofile: Implement Intel architectural perfmon support oprofile: Don't report Nehalem as core_2 oprofile: drop const in num counters field Revert "Oprofile Multiplexing Patch" x86, oprofile: BUG: using smp_processor_id() in preemptible code x86/oprofile: fix on_each_cpu build error ... Manually fixed trivial conflicts in drivers/oprofile/{cpu_buffer.c,event_buffer.h}
2008-10-20mips: use bcd2bin/bin2bcdAdrian Bunk
Changes mips to use the new bcd2bin/bin2bcd functions instead of the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 14:58:32 +0000