summaryrefslogtreecommitdiff
path: root/arch/mips
AgeCommit message (Collapse)Author
2010-08-05MIPS: JZ4740: Add qi_lb60 board supportLars-Peter Clausen
Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1472/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MMC: Add support for the controller on JZ4740 SoCs.Lars-Peter Clausen
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matt Fleming <matt@console-pimps.org> Cc: linux-mmc@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1463/ Patchwork: https://patchwork.linux-mips.org/patch/1523/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MTD: Nand: Add JZ4740 NAND driverLars-Peter Clausen
Add support for the NAND controller on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1470/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05FBDEV: JZ4740: Add framebuffer driverLars-Peter Clausen
Add support for the LCD controller on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-fbdev@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1470/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add Kbuild filesLars-Peter Clausen
Add the Kbuild files for the JZ4740 architecture and adds JZ4740 support to the MIPS Kbuild files. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1406/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add platform devicesLars-Peter Clausen
Add platform devices for all the JZ4740 platform drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1469/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add prom supportLars-Peter Clausen
Add support for initializing arcs_cmdline on JZ4740 based machines and provides a prom_putchar implementation. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1404/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add serial supportLars-Peter Clausen
The JZ4740 UART interface is almost 16550 compatible. The UART module needs to be enabled by setting a bit in the FCR register and it has support for receive timeout interrupts. Instead of adding yet another machine specific quirk to the 8250 serial driver we provide a serial_out implementation which sets the required additional flags. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1403/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add PWM supportLars-Peter Clausen
Add support for the PWM part of the timer unit on a JZ4740 SoC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1468/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add DMA support.Lars-Peter Clausen
Add support for DMA transfers on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1401/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add GPIO supportLars-Peter Clausen
Add gpiolib support for JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1467/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add setup codeLars-Peter Clausen
Add plat_mem_setup and get_system_type for JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1399/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add power-management and system reset supportLars-Peter Clausen
Add support for suspend/resume and poweroff/reboot on a JZ4740 SoC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1398/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add clocksource/clockevent support.Lars-Peter Clausen
Add clocksource and clockevent support for the timer/counter unit on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1397/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add timer supportLars-Peter Clausen
Add support for the timer/counter unit on a JZ4740 SoC. This code is used as a common base for the JZ4740 clocksource/clockevent implementation and PWM support. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1396/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add IRQ handler codeLars-Peter Clausen
Add support for IRQ handling on a JZ4740 SoC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1465/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add clock API support.Lars-Peter Clausen
Add support for managing the clocks found on JZ4740 SoC through the Linux clock API. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1466/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: JZ4740: Add base support for Ingenic JZ4740 System-on-a-ChipLars-Peter Clausen
Adds a new cpu type for the JZ4740 to the Linux MIPS architecture code. It also adds the iomem addresses for the different components found on a JZ4740 SoC. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1464/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: HOTPLUG_CPU fixes.David Daney
* Rename camel-case InitTLBStart_addr to octeon_bootloader_entry_addr. * Convert calls to cvmx_read64_uint32(), to simple pointer dereferences. * Set proper ebase. * Don't confuse coreid and cpu numbers. * Try to maintain consistent bootloader coremask. * Update the signature and boot_init_vector of supported bootloaders. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1491/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Simplify hotcpu_notifier registration.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Clean up SMP CPU numbering.David Daney
Also number offline CPUs that could potentially be brought on-line later. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Make MSI use handle_simple_irq().David Daney
The use of handle_percpu_irq() is not really what we want for MSI, use handle_simple_irq() instead. This is probably the prototypical case for using handle_simple_irq(), because all the MSIs are dispatched from the root interrupt service routine. Also since the base IRQ is not shared, don't pass IRQF_SHARED. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1488/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Get rid of a bunch of MSI IRQ number definitions.David Daney
MSI IRQ numbers are allocated dynamically, so there is no reason to have all these static definitions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1487/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Fix fixup_irqs for HOTPLUG_CPUDavid Daney
The original version went behind the back of everything, leaving things in an inconsistent state. Now we use the irq_set_affinity() to do the work for us. This has the advantage that the IRQ core's view of the affinity stays consistent. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1486/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Improve interrupt handling.David Daney
The main change is to change most of the IRQs from handle_percpu_irq to handle_fasteoi_irq. This necessitates extracting all the .ack code to common functions that are not exposed to the irq core. The affinity code now acts more sanely, by doing round-robin distribution instead of broadcasting. Because of the change to handle_fasteoi_irq and affinity, some of the IRQs had to be split into separate groups with their own struct irq_chip to prevent undefined operations on specific IRQ lines. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Move MSI code out of octeon-irq.c.David Daney
Put all the MSI code in one place (msi-octeon.c). This simplifies octeon-irq.c and gets rid of some ugly #ifdefs Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1484/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Alchemy: Add basic support for the GPR boardWolfgang Grandegger
From: Wolfgang Grandegger <wg@denx.de> Add basic support for the General Purpose Router (GPR) board from Trapeze ITS. Signed-off-by: Wolfgang Grandegger <wg@denx.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: au1000_eth: Get ethernet address from platform_dataManuel Lauss
au1000_eth uses firmware calls to get a valid MAC address, and changes it depending on platform device id. This patch moves this logic out of the driver into the platform device registration part, where boards with supported chips can use whatever firmware interface they need; the default implementation maintains compatibility with existing, YAMON-based firmware. Tested-by: Wolfgang Grandegger <wg@denx.de> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1481/ Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05SERIAL: 8250: Remove SERIAL_8250_AU1X00Manuel Lauss
Remove the SERIAL_8250_AU1X00 config symbol. Instead, use the MIPS_ALCHEMY one which is always defined when building an Au1x00-based platform. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Linux-serial <linux-serial@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/1461/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> This one depends on a previous patch (which removes SOC_AU1X00 and changes MACH_ALCHEMY) to apply cleanly (and then actually work), so I'd love for this to go in via the mips tree.
2010-08-05MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMYManuel Lauss
Remove the CONFIG_SOC_AU1X00 Kconfig symbol since its job can also be done by MACH_ALCHEMY, now renamed to MIPS_ALCHEMY. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1461/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: RM7000: Add support for tertiary cacheRicardo Mendoza
Add support for the external T-cache interface. Allow for platform independent size probing from 512KB to 8MB in powers of two. Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: RM7000: Make use of cache_op() instead of inline asmRicardo Mendoza
Small cleanup of the cache code to get rid of inline asm, in preparation to give tertiary cache support. Signed-off-by: Ricardo Mendoza <ricmm@gentoo.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: tracing: Fix the indentation of mcount.SWu Zhangjin
The commit "MIPS: Tracing: Cleanup the arguments passing of prepare_ftrace_return" has moved the "jal prepare_ftrace_return" instruction after the handling of the 3rd argument but forgot to remove the superfluous space before the related instructions. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1475/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Enable heap randomization.David Daney
Based somewhat on the PPC implementation. 32-bit processes have the heap randomized in an 8MB space, 256MB for 64-bit processes. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1479/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Randomize mmap if randomize_va_space is setDavid Daney
Fairly straight forward: For 32-bit address spaces randomize within a 16MB space, for 64-bit within a 256MB space. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1480/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: MTX-1: cleanup and commentsBruno Randolf
Add some comments about mtx1_pci_idsel() and remove a dead block of old code. Signed-off-by: Bruno Randolf <br1@einfach.org> To: linux-mips@linux-mips.org To: manuel.lauss@googlemail.com Cc: florian@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/1449/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Loongson: irq.c: Misc cleanupsShinya Kuribayashi
* Remove unnecessary 'if (int_status & (1 <<10))' statement * s/if (foo != 0)/if (foo)/ * Remove unused 'inst_status &= ~(1 << i);' line Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com> To: wuzhangjin@gmail.com CC: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1433/ Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: EMMA2RH: Replace EMMA2RH_SW_IRQ_INTxx with EMMA2RH_SW_IRQ(n)Shinya Kuribayashi
Don't duplicate worthless lines. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1390/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: EMMA2RH: Replace EMMA2RH_IRQ_INTxx with EMMA2RH_IRQ_INT(n)Shinya Kuribayashi
Don't duplicate worthless lines. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1389/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: EMMA2RH: Remove EMMA2RH_CPU_CASCADEShinya Kuribayashi
Although all EMMAxxx SoCs can support IP2 and IP3 hardware interrupts, current EMMA2RH plat_irq_dispatch() supports IP2 only. We can make it configurable in the future, but for the time being, would like to make things explicitly allcated to IP2 in accordance with plat_irq_dispatch(). Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1388/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: EMMA2RH: Remove useless CPU_IRQ_BASEShinya Kuribayashi
For historical reasons, we used to put MIPS CPU IRQs behind SoC-specific IRQs in the queue, and have been using CPU_IRQ_BASE as MIPS_CPU_IRQ_BASE. In recent years, however, we've brought it back to normal order, and now CPU_IRQ_BASE just redefines the generic MIPS_CPU_IRQ_BASE. At the same time, NUM_CPU_IRQ is also removed as useless. Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi.px@renesas.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1387/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Octeon: Define ARCH_HAS_USABLE_BUILTIN_POPCOUNT for OCTEON.David Daney
OCTEON implements __builtin_popcount with a single instruction, so lets use it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1431/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Create and use asm/arch_hweight.hDavid Daney
Some MIPS ISA processor varients can do hweight operations efficiently. Split arch_hweight.h into a seperate file, and implement the operations with __builtin_popcount{,ll} if supported. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Cc: David Daney <ddaney@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/1430/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: AR7: rewrite of cpmac_get_mac()Alexander Clouter
Shamelessly stealing wisdom from pasemi_mac.c, I found char2hex() could be replaced with a single call to sscanf(), looks cleaner to me at least. The result is 100 bytes trimmed off the size of a compiled cpmac_get_mac() and as an extra bonus it grumbles and gracefully fails over to using random_ether_addr() when an attempt to parse an invalid MAC address is made. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Cc: florian@openwrt.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: PowerTV: Simplify command line handling and needed config changesDavid VomLehn
Additional changes to Youichi Yuasa's command line simplication code The PowerTV platform uses a non-standard way to get the kernel command line--we insert a built-in command line into arcs_cmdline and to get additional command line information from the bootloader via a pointer in the a1 register. It is necessary to insert a space between to the two strings or the last argument from arcs_cmdline and the first argument from the bootloader may be inadvertantly combined. It is also necessary to set CONFIG_CMDLINE_BOOL to "y" and to set the default command line to an empty string to get the simplified code to work properly in the PowerTV environment. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1438/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Update comment for cpu_has_clo_clzRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: MSP71xx: Remove dead CONFIG_MTD_PMC_MSP_RAMROOTChristoph Egger
CONFIG_MTD_PMC_MSP_RAMROOT doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> To: Ralf Baechle <ralf@linux-mips.org>, Yoichi Yuasa <yuasa@linux-mips.org>, linux-mips@linux-mips.org, linux-kernel@vger.kernel.org Cc: vamos@i4.informatik.uni-erlangen.de Acked-by: Shane McDonald <mcdonald.shane@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1375/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: PowerTV: Removing dead CONFIG_DIAGNOSTICSChristoph Egger
CONFIG_DIAGNOSTICS doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> To: David VomLehn <dvomlehn@cisco.com> To: Yoichi Yuasa <yuasa@linux-mips.org> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Cc: vamos@i4.informatik.uni-erlangen.de Patchwork: https://patchwork.linux-mips.org/patch/1374/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: PNX Removing dead CONFIG_PMCTWILEDChristoph Egger
CONFIG_PMCTWILED doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Cc: vamos@i4.informatik.uni-erlangen.de Acked-by: Shane McDonald <mcdonald.shane@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1373/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Remove dead CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USERChristoph Egger
CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USER doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> To: Manuel Lauss <manuel.lauss@gmail.com>, To: linux-mips@linux-mips.org To: linux-kernel@vger.kernel.org Cc: vamos@i4.informatik.uni-erlangen.de Patchwork: https://patchwork.linux-mips.org/patch/1370/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 08:29:44 +0000