Age | Commit message (Collapse) | Author |
|
Add the R6 MUL instruction encoding for 3 operand signed multiply to
uasm so that KVM can use uasm for generating its entry point code at
runtime on R6.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add MTHI/MTLO instructions for writing to the hi & lo registers to uasm
so that KVM can use uasm for generating its entry point code at runtime.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add DI instruction for disabling interrupts to uasm so that KVM can use
uasm for generating its entry point code at runtime.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add CFCMSA/CTCMSA instructions for accessing MSA control registers to
uasm so that KVM can use uasm for generating its entry point code at
runtime.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add CFC1/CTC1 instructions for accessing FP control registers to uasm so
that KVM can use uasm for generating its entry point code at runtime.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Config.VI bit specifies that the instruction cache is virtually
tagged, which is checked in c-r4k.c's probe_pcache(). Add a proper
definition for it in mipsregs.h and make use of it.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull more MIPS updates from Ralf Baechle:
"This is the secondnd batch of MIPS patches for 4.7. Summary:
CPS:
- Copy EVA configuration when starting secondary VPs.
EIC:
- Clear Status IPL.
Lasat:
- Fix a few off by one bugs.
lib:
- Mark intrinsics notrace. Not only are the intrinsics
uninteresting, it would cause infinite recursion.
MAINTAINERS:
- Add file patterns for MIPS BRCM device tree bindings.
- Add file patterns for mips device tree bindings.
MT7628:
- Fix MT7628 pinmux typos.
- wled_an pinmux gpio.
- EPHY LEDs pinmux support.
Pistachio:
- Enable KASLR
VDSO:
- Build microMIPS VDSO for microMIPS kernels.
- Fix aliasing warning by building with `-fno-strict-aliasing' for
debugging but also tracing them might result in recursion.
Misc:
- Add missing FROZEN hotplug notifier transitions.
- Fix clk binding example for varioius PIC32 devices.
- Fix cpu interrupt controller node-names in the DT files.
- Fix XPA CPU feature separation.
- Fix write_gc0_* macros when writing zero.
- Add inline asm encoding helpers.
- Add missing VZ accessor microMIPS encodings.
- Fix little endian microMIPS MSA encodings.
- Add 64-bit HTW fields and fix its configuration.
- Fix sigreturn via VDSO on microMIPS kernel.
- Lots of typo fixes.
- Add definitions of SegCtl registers and use them"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (49 commits)
MIPS: Add missing FROZEN hotplug notifier transitions
MIPS: Build microMIPS VDSO for microMIPS kernels
MIPS: Fix sigreturn via VDSO on microMIPS kernel
MIPS: devicetree: fix cpu interrupt controller node-names
MIPS: VDSO: Build with `-fno-strict-aliasing'
MIPS: Pistachio: Enable KASLR
MIPS: lib: Mark intrinsics notrace
MIPS: Fix 64-bit HTW configuration
MIPS: Add 64-bit HTW fields
MAINTAINERS: Add file patterns for mips device tree bindings
MAINTAINERS: Add file patterns for mips brcm device tree bindings
MIPS: Simplify DSP instruction encoding macros
MIPS: Add missing tlbinvf/XPA microMIPS encodings
MIPS: Fix little endian microMIPS MSA encodings
MIPS: Add missing VZ accessor microMIPS encodings
MIPS: Add inline asm encoding helpers
MIPS: Spelling fix lets -> let's
MIPS: VR41xx: Fix typo
MIPS: oprofile: Fix typo
MIPS: math-emu: Fix typo
...
|
|
The Hardware page Table Walker (HTW) is being misconfigured on 64-bit
kernels. The PWSize.PS (pointer size) bit determines whether pointers
within directories are loaded as 32-bit or 64-bit addresses, but was
never being set to 1 for 64-bit kernels where the unsigned long in pgd_t
is 64-bits wide.
This actually reduces rather than improves performance when the HTW is
enabled on P6600 since the HTW is initiated lots, but walks are all
aborted due I think to bad intermediate pointers.
Since we were already taking the width of the PTEs into account by
setting PWSize.PTEW, which is the left shift applied to the page table
index *in addition to* the native pointer size, we also need to reduce
PTEW by 1 when PS=1. This is done by calculating PTEW based on the
relative size of pte_t compared to pgd_t.
Finally in order for the HTW to be used when PS=1, the appropriate
XK/XS/XU bits corresponding to the different 64-bit segments need to be
set in PWCtl. We enable only XU for now to enable walking for XUSeg.
Supporting walking for XKSeg would be a bit more involved so is left for
a future patch. It would either require the use of a per-CPU top level
base directory if supported by the HTW (a bit like pgd_current but with
a second entry pointing at swapper_pg_dir), or the HTW would prepend bit
63 of the address to the global directory index which doesn't really
match how we split user and kernel page directories.
Fixes: cab25bc7537b ("MIPS: Extend hardware table walking support to MIPS64")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13364/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add field definitions for some of the 64-bit specific Hardware page
Table Walker (HTW) register fields in PWSize and PWCtl, in preparation
for fixing the 64-bit HTW configuration.
Also print these fields out along with the others in print_htw_config().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Merge updates from Andrew Morton:
- fsnotify fix
- poll() timeout fix
- a few scripts/ tweaks
- debugobjects updates
- the (small) ocfs2 queue
- Minor fixes to kernel/padata.c
- Maybe half of the MM queue
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
mm, page_alloc: restore the original nodemask if the fast path allocation failed
mm, page_alloc: uninline the bad page part of check_new_page()
mm, page_alloc: don't duplicate code in free_pcp_prepare
mm, page_alloc: defer debugging checks of pages allocated from the PCP
mm, page_alloc: defer debugging checks of freed pages until a PCP drain
cpuset: use static key better and convert to new API
mm, page_alloc: inline pageblock lookup in page free fast paths
mm, page_alloc: remove unnecessary variable from free_pcppages_bulk
mm, page_alloc: pull out side effects from free_pages_check
mm, page_alloc: un-inline the bad part of free_pages_check
mm, page_alloc: check multiple page fields with a single branch
mm, page_alloc: remove field from alloc_context
mm, page_alloc: avoid looking up the first zone in a zonelist twice
mm, page_alloc: shortcut watermark checks for order-0 pages
mm, page_alloc: reduce cost of fair zone allocation policy retry
mm, page_alloc: shorten the page allocator fast path
mm, page_alloc: check once if a zone has isolated pageblocks
mm, page_alloc: move __GFP_HARDWALL modifications out of the fastpath
mm, page_alloc: simplify last cpupid reset
mm, page_alloc: remove unnecessary initialisation from __alloc_pages_nodemask()
...
|
|
I've just discovered that the useful-sounding has_transparent_hugepage()
is actually an architecture-dependent minefield: on some arches it only
builds if CONFIG_TRANSPARENT_HUGEPAGE=y, on others it's also there when
not, but on some of those (arm and arm64) it then gives the wrong
answer; and on mips alone it's marked __init, which would crash if
called later (but so far it has not been called later).
Straighten this out: make it available to all configs, with a sensible
default in asm-generic/pgtable.h, removing its definitions from those
arches (arc, arm, arm64, sparc, tile) which are served by the default,
adding #define has_transparent_hugepage has_transparent_hugepage to
those (mips, powerpc, s390, x86) which need to override the default at
runtime, and removing the __init from mips (but maybe that kind of code
should be avoided after init: set a static variable the first time it's
called).
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arch/arc]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [arch/s390]
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
XPA kernels hardcode for the presence of RIXI - the PTE format & its
handling presume RI & XI bits. Make this dependence explicit by panicing
if we run on a system that violates it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13125/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Performing an MTHC0 instruction without XPA being present will trigger a
reserved instruction exception, therefore conditionalise the use of this
instruction when building TLB handlers (build_update_entries()), and in
__update_tlb().
This allows an XPA kernel to run on non XPA hardware without that
instruction implemented, just like it can run on XPA capable hardware
without XPA in use (with the noxpa kernel argument) or with XPA not
configured in hardware.
[paul.burton@imgtec.com:
- Rebase atop other TLB work.
- Add "mm" to subject.
- Handle the __kmap_pgprot case.]
Fixes: c5b367835cfc ("MIPS: Add support for XPA.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13124/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
We can simplify build_update_entries by unifying the code for the 36 bit
physical addressing with MIPS32 case with the general case, by using
pte_off_ variables in all cases & handling the trivial
_PAGE_GLOBAL_SHIFT == 0 case in build_convert_pte_to_entrylo. This
leaves XPA as the only special case.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13123/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The XPA case in iPTE_SW or's in software mode bits to the pte_low value
(which is what actually ends up in the high 32 bits of EntryLo...). It
does this presuming that only bits in the upper 16 bits of the 32 bit
pte_low value will be set. Make this assumption explicit with a BUG_ON.
A similar assumption is made for the hardware mode bits, which are or'd
in with a single ori instruction. Make that assumption explicit with a
BUG_ON too.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13122/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Rather than hardcode a scratch register for the XPA case in iPTE_SW,
pass one through from the work registers allocated by the caller. This
allows for the XPA path to function correctly regardless of the work
registers in use.
Without doing this there are cases (where KScratch registers are
unavailable) in which iPTE_SW will incorrectly clobber $1 despite it
already being in use for the PTE or PTE pointer.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13121/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
For XPA kernels build_update_entries() uses $1 (at) as a scratch
register, but doesn't arrange for it to be preserved, so it will always
be clobbered by the TLB refill exception. Although this register
normally has a very short lifetime that doesn't cross memory accesses,
TLB refills due to instruction fetches (either on a page boundary or
after preemption) could clobber live data, and its easy to reproduce
the clobber with a little bit of assembler code.
Note that the use of a hardware page table walker will partly mask the
problem, as the TLB refill handler will not always be invoked.
This is fixed by avoiding the use of the extra scratch register. The
pte_high parts (going into the lower half of the EntryLo registers) are
loaded and manipulated separately so as to keep the PTE pointer around
for the other halves (instead of storing in the scratch register), and
the pte_low parts (going into the high half of the EntryLo registers)
are masked with 0x00ffffff using an ext instruction (instead of loading
0x00ffffff into the scratch register and AND'ing).
[paul.burton@imgtec.com:
- Rebase atop other TLB work.
- Use ext instead of an sll, srl sequence.
- Use cpu_has_xpa instead of #ifdefs.
- Modify commit subject to include "mm".]
Fixes: c5b367835cfc ("MIPS: Add support for XPA.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13120/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
There are 2 distinct cases in which a kernel for a MIPS32 CPU
(CONFIG_CPU_MIPS32=y) may use 64 bit physical addresses
(CONFIG_PHYS_ADDR_T_64BIT=y):
- 36 bit physical addressing as used by RMI Alchemy & Netlogic XLP/XLR
CPUs.
- MIPS32r5 eXtended Physical Addressing (XPA).
These 2 cases are distinct in that they require different behaviour from
the kernel - the EntryLo registers have different formats. Until Linux
v4.1 we only supported the first case, with code conditional upon the 2
aforementioned Kconfig variables being set. Commit c5b367835cfc ("MIPS:
Add support for XPA.") added support for the second case, but did so by
modifying the code that existed for the first case rather than treating
the 2 cases as distinct. Since the EntryLo registers have different
formats this breaks the 36 bit Alchemy/XLP/XLR case. Fix this by
splitting the 2 cases, with XPA cases now being conditional upon
CONFIG_XPA and the non-XPA case matching the code as it existed prior to
commit c5b367835cfc ("MIPS: Add support for XPA.").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: Manuel Lauss <manuel.lauss@gmail.com>
Tested-by: Manuel Lauss <manuel.lauss@gmail.com>
Fixes: c5b367835cfc ("MIPS: Add support for XPA.")
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@vger.kernel.org # v4.1+
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13119/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Ever since support for RI/XI was implemented by commit 6dd9344cfc41
("MIPS: Implement Read Inhibit/eXecute Inhibit") we've had a mixture of
_PAGE_READ & _PAGE_NO_READ bits. Rather than keep both around, switch
away from using _PAGE_READ to determine page presence & instead invert
the use to _PAGE_NO_READ. Wherever we formerly had no definition for
_PAGE_NO_READ, change what was _PAGE_READ to _PAGE_NO_READ. The end
result is that we consistently use _PAGE_NO_READ to determine whether a
page is readable, regardless of whether RI/XI is implemented.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13116/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The hardware page table walker (HTW) configuration is broken on XPA
kernels where XPA couldn't be enabled (either nohtw or the hardware
doesn't support it). This is because the PWSize.PTEW field (PTE width)
was only set to 8 bytes (an extra shift of 1) in config_htw_params() if
PageGrain.ELPA (enable large physical addressing) is set. On an XPA
kernel though the size of PTEs is fixed at 8 bytes regardless of whether
XPA could actually be enabled.
Fix the initialisation of this field based on sizeof(pte_t) instead.
Fixes: c5b367835cfc ("MIPS: Add support for XPA.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Steven J. Hill <sjhill@realitydiluted.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13113/
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
In preparation for supporting variable ASID masks, retrieve ASID masks
using functions in asm/cpu-info.h which accept struct cpuinfo_mips. This
will allow those functions to determine the ASID mask based upon the CPU
in a later patch. This also allows for the r3k & r8k cases to be handled
in Kconfig, which is arguably cleaner than the previous #ifdefs.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13210/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
MIPS hardware may have an antialising support and it works even
page size is small.
Setup a shared memory aliasing mask to page size if hardware has
an antialising support. Big shared memory mask forces a disruption
in page address assignment and that corrupts Android library memory
handling.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: cernekee@gmail.com
Cc: paul.gortmaker@windriver.com
Cc: kumba@gentoo.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11516/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A R1,
Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as FTLB,
L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User Local
register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast
TLB refill support, etc.
This patch introduce a config option, CONFIG_LOONGSON3_ENHANCEMENT, to
enable those enhancements which are not probed at run time. If you want
a generic kernel to run on all Loongson 3 machines, please say 'N'
here. If you want a high-performance kernel to run on new Loongson 3
machines only, please say 'Y' here.
Some additional explanations:
1) SFB locates between core and L1 cache, it causes memory access out
of order, so writel/outl (and other similar functions) need a I/O
reorder barrier.
2) Loongson 3 has a bug that di instruction can not save the irqflag,
so arch_local_irq_save() is modified. Since CPU_MIPSR2 is selected
by CONFIG_LOONGSON3_ENHANCEMENT, generic kernel doesn't use ei/di
at all.
3) CPU_HAS_PREFETCH is selected by CONFIG_LOONGSON3_ENHANCEMENT, so
MIPS_CPU_PREFETCH (used by uasm) probing is also put in this patch.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12755/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-3A R2 has pwbase/pwfield/pwsize/pwctl registers in CP0 (this
is very similar to HTW) and lwdir/lwpte/lddir/ldpte instructions which
can be used for fast TLB refill.
[ralf@linux-mips.org: Resolve conflict.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12754/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-2 has a 4 entry itlb which is a subset of jtlb, Loongson-3 has
a 4 entry itlb and a 4 entry dtlb which are subsets of jtlb. We should
write diag register to invalidate itlb/dtlb when flushing jtlb because
itlb/dtlb are not totally transparent to software.
For Loongson-3A R2 (and newer), we should invalidate ITLB, DTLB, VTLB
and FTLB before we enable/disable FTLB.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12753/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-3 maintains cache coherency by hardware, this means:
1) It's icache is coherent with dcache.
2) It's dcaches don't alias (maybe depend on PAGE_SIZE).
3) It maintains cache coherency across cores (and for DMA).
So we can skip most cache flush operations by setting relevant handlers
to `cache_noop' in `r4k_cache_init'.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12752/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Loongson-3 CPU family:
Code-name Brand-name PRId
Loongson-3A R1 Loongson-3A1000 0x6305
Loongson-3A R2 Loongson-3A2000 0x6308
Loongson-3B R1 Loongson-3B1000 0x6306
Loongson-3B R2 Loongson-3B1500 0x6307
Features of R2 revision of Loongson-3A:
- Primary cache includes I-Cache, D-Cache and V-Cache (Victim Cache).
- I-Cache, D-Cache and V-Cache are 16-way set-associative, linesize is
64 bytes.
- 64 entries of VTLB (classic TLB), 1024 entries of FTLB (8-way
set-associative).
- Supports DSP/DSPv2 instructions, UserLocal register and Read-Inhibit/
Execute-Inhibit.
[ralf@linux-mips.org: Resolved merge conflicts.]
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12751/
Patchwork: https://patchwork.linux-mips.org/patch/13136/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
local_r4k___flush_cache_all() is missing a special check for BMIPS5000
processors, we need to blast the S-cache, just like other MTI processors
since we have an inclusive cache. We also need an additional __sync() to
make sure this is completed.
Fixes: d74b0172e4e2c ("MIPS: BMIPS: Add special cache handling in c-r4k.c")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13012/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
BMIPS5000 and BMIPS5200 processor have no D cache aliases, and this is
properly handled by the per-CPU override added at the end of
r4k_cache_init(), the problem is that the output of probe_pcache()
disagrees with that, since this is too late:
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
With the change moved earlier, we now have a consistent output with the
settings we are intending to have:
Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes
Fixes: d74b0172e4e2c ("MIPS: BMIPS: Add special cache handling in c-r4k.c")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13011/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
BMIPS5000 and BMIPS52000 processors have their I-cache filling from the
D-cache. Since BMIPS_GENERIC does not provide (yet) a
cpu-feature-overrides.h file, this was not set anywhere, so make sure
the R4K cache detection takes care of that.
Fixes: d74b0172e4e2c ("MIPS: BMIPS: Add special cache handling in c-r4k.c")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13010/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
It's possible for pages to become visible prior to update_mmu_cache
running if a thread within the same address space preempts the current
thread or runs simultaneously on another CPU. That is, the following
scenario is possible:
CPU0 CPU1
write to page
flush_dcache_page
flush_icache_page
set_pte_at
map page
update_mmu_cache
If CPU1 maps the page in between CPU0's set_pte_at, which marks it valid
& visible, and update_mmu_cache where the dcache flush occurs then CPU1s
icache will fill from stale data (unless it fills from the dcache, in
which case all is good, but most MIPS CPUs don't have this property).
Commit 4d46a67a3eb8 ("MIPS: Fix race condition in lazy cache flushing.")
attempted to fix that by performing the dcache flush in
flush_icache_page such that it occurs before the set_pte_at call makes
the page visible. However it has the problem that not all code that
writes to pages exposed to userland call flush_icache_page. There are
many callers of set_pte_at under mm/ and only 2 of them do call
flush_icache_page. Thus the race window between a page becoming visible
& being coherent between the icache & dcache remains open in some cases.
To illustrate some of the cases, a WARN was added to __update_cache with
this patch applied that triggered in cases where a page about to be
flushed from the dcache was not the last page provided to
flush_icache_page. That is, backtraces were obtained for cases in which
the race window is left open without this patch. The 2 standout examples
follow.
When forking a process:
[ 15.271842] [<80417630>] __update_cache+0xcc/0x188
[ 15.277274] [<80530394>] copy_page_range+0x56c/0x6ac
[ 15.282861] [<8042936c>] copy_process.part.54+0xd40/0x17ac
[ 15.289028] [<80429f80>] do_fork+0xe4/0x420
[ 15.293747] [<80413808>] handle_sys+0x128/0x14c
When exec'ing an ELF binary:
[ 14.445964] [<80417630>] __update_cache+0xcc/0x188
[ 14.451369] [<80538d88>] move_page_tables+0x414/0x498
[ 14.457075] [<8055d848>] setup_arg_pages+0x220/0x318
[ 14.462685] [<805b0f38>] load_elf_binary+0x530/0x12a0
[ 14.468374] [<8055ec3c>] search_binary_handler+0xbc/0x214
[ 14.474444] [<8055f6c0>] do_execveat_common+0x43c/0x67c
[ 14.480324] [<8055f938>] do_execve+0x38/0x44
[ 14.485137] [<80413808>] handle_sys+0x128/0x14c
These code paths write into a page, call flush_dcache_page then call
set_pte_at without flush_icache_page inbetween. The end result is that
the icache can become corrupted & userland processes may execute
unexpected or invalid code, typically resulting in a reserved
instruction exception, a trap or a segfault.
Fix this race condition fully by performing any cache maintenance
required to keep the icache & dcache in sync in set_pte_at, before the
page is made valid. This has the added bonus of ensuring the cache
maintenance always happens in one location, rather than being duplicated
in flush_icache_page & update_mmu_cache. It also matches the way other
architectures solve the same problem (see arm, ia64 & powerpc).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: Ionela Voinescu <ionela.voinescu@imgtec.com>
Cc: Lars Persson <lars.persson@axis.com>
Fixes: 4d46a67a3eb8 ("MIPS: Fix race condition in lazy cache flushing.")
Cc: Steven J. Hill <sjhill@realitydiluted.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable <stable@vger.kernel.org> # v4.1+
Patchwork: https://patchwork.linux-mips.org/patch/12722/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
The following patch will expose __update_cache to highmem pages. Handle
them by mapping them in for the duration of the cache maintenance, just
like in __flush_dcache_page. The code for that isn't shared because we
need the page address in __update_cache so sharing became messy. Given
that the entirity is an extra 5 lines, just duplicate it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: stable <stable@vger.kernel.org> # v4.1+
Patchwork: https://patchwork.linux-mips.org/patch/12721/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
When flush_dcache_page is called on an executable page, that page is
about to be provided to userland & we can presume that the icache
contains no valid entries for its address range. However if the icache
does not fill from the dcache then we cannot presume that the pages
content has been written back as far as the memories that the dcache
will fill from (ie. L2 or further out).
This was being done for lowmem pages, but not for highmem which can lead
to icache corruption. Fix this by mapping highmem pages & flushing their
content from the dcache in __flush_dcache_page before providing the page
to userland, just as is done for lowmem pages.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Lars Persson <lars.persson@axis.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12720/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add casses supporting the M6250 CPU to various switch statements in the
core MIPS kernel code that define behaviour dependent upon the CPU.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Maciej W. Rozycki <macro@codesourcery.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12374/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Add cases supporting the P6600 CPU to various switch statements in
core MIPS kernel code that define behaviour dependent upon the CPU.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Petri Gynther <pgynther@google.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12343/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
This patch ensures that the dev parameter is checked for NULL before it
is dereferenced in massage_gfp_flags. If dev is NULL, then fall back
setting the GFP flag requested and available.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11919/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Coherence Manager 3 (CM3) as present in I6400 can fill icache lines
effectively from dirty dcaches, so there is no need to flush dirty lines
from dcaches through to L2 prior to icache invalidation.
Set the MIPS_CACHE_IC_F_DC flag such that cpu_has_ic_fills_f_dc
evaluates to true, which avoids those dcache flushes.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
It is still necessary to handle icache coherency in flush_cache_range()
and copy_to_user_page() when the icache fills from the dcache, even
though the dcache does not need to be written back. However when this
handling was added in commit 2eaa7ec286db ("[MIPS] Handle I-cache
coherency in flush_cache_range()"), it did not do any icache flushing
when it fills from dcache.
Therefore fix r4k_flush_cache_range() to run
local_r4k_flush_cache_range() without taking into account whether icache
fills from dcache, so that the icache coherency gets handled. Checks are
also added in local_r4k_flush_cache_range() so that the dcache blast
doesn't take place when icache fills from dcache.
A test to mmap a page PROT_READ|PROT_WRITE, modify code in it, and
mprotect it to VM_READ|VM_EXEC (similar to case described in above
commit) can hit this case quite easily to verify the fix.
A similar check was added in commit f8829caee311 ("[MIPS] Fix aliasing
bug in copy_to_user_page / copy_from_user_page"), so also fix
copy_to_user_page() similarly, to call flush_cache_page() without taking
into account whether icache fills from dcache, since flush_cache_page()
already takes that into account to avoid performing a dcache flush.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12179/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: trivial@kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12617/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
After writing the appropriate mask to the cop0 PageMask register, read
the register back & check it matches what we want. If it doesn't then
the MMU does not support the page size the kernel is configured for and
we're better off bailing than continuing to do odd things with TLB
exceptions.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10691/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
"This tree adds support for a new memory protection hardware feature
that is available in upcoming Intel CPUs: 'protection keys' (pkeys).
There's a background article at LWN.net:
https://lwn.net/Articles/643797/
The gist is that protection keys allow the encoding of
user-controllable permission masks in the pte. So instead of having a
fixed protection mask in the pte (which needs a system call to change
and works on a per page basis), the user can map a (handful of)
protection mask variants and can change the masks runtime relatively
cheaply, without having to change every single page in the affected
virtual memory range.
This allows the dynamic switching of the protection bits of large
amounts of virtual memory, via user-space instructions. It also
allows more precise control of MMU permission bits: for example the
executable bit is separate from the read bit (see more about that
below).
This tree adds the MM infrastructure and low level x86 glue needed for
that, plus it adds a high level API to make use of protection keys -
if a user-space application calls:
mmap(..., PROT_EXEC);
or
mprotect(ptr, sz, PROT_EXEC);
(note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
this special case, and will set a special protection key on this
memory range. It also sets the appropriate bits in the Protection
Keys User Rights (PKRU) register so that the memory becomes unreadable
and unwritable.
So using protection keys the kernel is able to implement 'true'
PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
PROT_READ as well. Unreadable executable mappings have security
advantages: they cannot be read via information leaks to figure out
ASLR details, nor can they be scanned for ROP gadgets - and they
cannot be used by exploits for data purposes either.
We know about no user-space code that relies on pure PROT_EXEC
mappings today, but binary loaders could start making use of this new
feature to map binaries and libraries in a more secure fashion.
There is other pending pkeys work that offers more high level system
call APIs to manage protection keys - but those are not part of this
pull request.
Right now there's a Kconfig that controls this feature
(CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
(like most x86 CPU feature enablement code that has no runtime
overhead), but it's not user-configurable at the moment. If there's
any serious problem with this then we can make it configurable and/or
flip the default"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
mm/core, x86/mm/pkeys: Add execute-only protection keys support
x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
x86/mm/pkeys: Allow kernel to modify user pkey rights register
x86/fpu: Allow setting of XSAVE state
x86/mm: Factor out LDT init from context init
mm/core, x86/mm/pkeys: Add arch_validate_pkey()
mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
x86/mm/pkeys: Add Kconfig prompt to existing config option
x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
x86/mm/pkeys: Dump PKRU with other kernel registers
mm/core, x86/mm/pkeys: Differentiate instruction fetches
x86/mm/pkeys: Optimize fault handling in access_error()
mm/core: Do not enforce PKEY permissions on remote mm access
um, pkeys: Add UML arch_*_access_permitted() methods
mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
x86/mm/gup: Simplify get_user_pages() PTE bit handling
...
|
|
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In current scache init cache line_size is determined from
cpu config register, however if there there no scache
then mips_sc_probe_cm3 function populates a invalid line_size of 2.
The invalid line_size can cause a NULL pointer deference
during r4k_dma_cache_inv as r4k_blast_scache is populated
based on line_size. Scache line_size of 2 is invalid option in
r4k_blast_scache_setup.
This issue was faced during a MIPS I6400 based virtual platform bring up
where scache was not available in virtual platform model.
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Fixes: 7d53e9c4cd21("MIPS: CM3: Add support for CM3 L2 cache.")
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hartley <James.Hartley@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.2+
Patchwork: https://patchwork.linux-mips.org/patch/12710/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Replace calls to get_random_int() followed by a cast to (unsigned long)
with calls to get_random_long(). Also address shifting bug which, in
case of x86 removed entropy mask for mmap_rnd_bits values > 31 bits.
Signed-off-by: Daniel Cashman <dcashman@android.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Kralevich <nnk@google.com>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We will soon modify the vanilla get_user_pages() so it can no
longer be used on mm/tasks other than 'current/current->mm',
which is by far the most common way it is called. For now,
we allow the old-style calls, but warn when they are used.
(implemented in previous patch)
This patch switches all callers of:
get_user_pages()
get_user_pages_unlocked()
get_user_pages_locked()
to stop passing tsk/mm so they will no longer see the warnings.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: jack@suse.cz
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit c014d164f21d ("MIPS: Add platform callback before initializing
the L2 cache") added a platform_early_l2_init function in order to allow
platforms to probe for the CM before L2 initialisation is performed, so
that CM GCRs are available to mips_sc_probe.
That commit actually fails to do anything useful, since it checks
mips_cm_revision to determine whether it should call mips_cm_probe but
the result of mips_cm_revision will always be 0 until mips_cm_probe has
been called. Thus the "early" mips_cm_probe call never occurs.
Fix this & drop the useless weak platform_early_l2_init function by
simply calling mips_cm_probe from setup_arch. For platforms that don't
select CONFIG_MIPS_CM this will be a no-op, and for those that do it
removes the requirement for them to call mips_cm_probe manually
(although doing so isn't harmful for now).
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12475/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.
The executive summary:
- ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
- Avoid useless rebuilds for zboot.
- jz4780: Add NEMC, BCH and NAND device tree nodes
- Initial support for the MicroChip's DT platform. As all the device
drivers are missing this is still of limited use.
- Some Loongson3 cleanups.
- The unavoidable whitespace polishing.
- Reduce clock skew when synchronizing the CPU cycle counters on CPU
startup.
- Add MIPS R6 fixes.
- Lots of cleanups across arch/mips as fallout from KVM.
- Lots of minor fixes and changes for IEEE 754-2008 support to the
FPU emulator / fp-assist software.
- Minor Ralink, BCM47xx and bcm963xx platform support improvments.
- Support SMP on BCM63168"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
MIPS: zboot: Add support for serial debug using the PROM
MIPS: zboot: Avoid useless rebuilds
MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
MIPS: bcm963xx: Update bcm_tag field image_sequence
MIPS: bcm963xx: Move extended flash address to bcm_tag header file
MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
MIPS: bcm63xx: nvram: Use nvram structure definition from header file
MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
MAINTAINERS: Add KVM for MIPS entry
MIPS: KVM: Add missing newline to kvm_err()
MIPS: Move KVM specific opcodes into asm/inst.h
MIPS: KVM: Use cacheops.h definitions
MIPS: Break down cacheops.h definitions
MIPS: Use EXCCODE_ constants with set_except_vector()
MIPS: Update trap codes
MIPS: Move Cause.ExcCode trap codes to mipsregs.h
MIPS: KVM: Make kvm_mips_{init,exit}() static
MIPS: KVM: Refactor added offsetof()s
MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
...
|
|
Commit be0c37c985eddc4 (MIPS: Rearrange PTE bits into fixed positions.)
defines fixed PTE bits for MIPS R2. Then, commit d7b631419b3d230a4d383
(MIPS: pgtable-bits: Fix XPA damage to R6 definitions.) adds the MIPS
R6 definitions in the same way as MIPS R2. But some R6 #ifdefs in the
later commit are missing, so in this patch I fix that.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12164/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
|
|
Let's define page_mapped() to be true for compound pages if any
sub-pages of the compound page is mapped (with PMD or PTE).
On other hand page_mapcount() return mapcount for this particular small
page.
This will make cases like page_get_anon_vma() behave correctly once we
allow huge pages to be mapped with PTE.
Most users outside core-mm should use page_mapcount() instead of
page_mapped().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
With new refcounting we don't need to mark PMDs splitting. Let's drop
code to handle this.
pmdp_splitting_flush() is not needed too: on splitting PMD we will do
pmdp_clear_flush() + set_pte_at(). pmdp_clear_flush() will do IPI as
needed for fast_gup.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Steve Capper <steve.capper@linaro.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|