summaryrefslogtreecommitdiff
path: root/arch/mips/loongson
AgeCommit message (Collapse)Author
2014-03-31MIPS: Loongson 3: Add CPU hotplug supportHuacai Chen
Tips of Loongson's CPU hotplug: 1, To fully shutdown a core in Loongson 3, the target core should go to CKSEG1 and flush all L1 cache entries at first. Then, another core (usually Core 0) can safely disable the clock of the target core. So play_dead() call loongson3_play_dead() via CKSEG1 (both uncached and unmmaped). 2, The default clocksource of Loongson is MIPS. Since clock source is a global device, timekeeping need the CP0' Count registers of each core be synchronous. Thus, when a core is up, we use a SMP_ASK_C0COUNT IPI to ask Core-0's Count. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6639 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add Loongson-3 SMP supportHuacai Chen
IPI registers of Loongson-3 include IPI_SET, IPI_CLEAR, IPI_STATUS, IPI_EN and IPI_MAILBOX_BUF. Each bit of IPI_STATUS indicate a type of IPI and IPI_EN indicate whether the IPI is enabled. The sender write 1 to IPI_SET bits generate IPIs in IPI_STATUS, and receiver write 1 to bits of IPI_CLEAR to clear IPIs. IPI_MAILBOX_BUF are used to deliver more information about IPIs. Why we change code in arch/mips/loongson/common/setup.c? If without this change, when SMP configured, system cannot boot since it hang at printk() in cgroup_init_early(). The root cause is: console_trylock() \-->down_trylock(&console_sem) \-->raw_spin_unlock_irqrestore(&sem->lock, flags) \-->_raw_spin_unlock_irqrestore()(SMP/UP have different versions) \-->__raw_spin_unlock_irqrestore() (following is the SMP case) \-->do_raw_spin_unlock() \-->arch_spin_unlock() \-->nudge_writes() \-->mb() \-->wbflush() \-->__wbflush() In previous code __wbflush() is initialized in plat_mem_setup(), but cgroup_init_early() is called before plat_mem_setup(). Therefore, In this patch we make changes to avoid boot failure. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6638 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson: Add Loongson-3 Kconfig optionsHuacai Chen
Added Kconfig options include: Loongson-3 CPU and machine definition, CPU cache features, UEFI-like firmware interface (LEFI), HT-linked PCI, and swiotlb support. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6637 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson: Add swiotlb to support All-Memory DMAHuacai Chen
Loongson doesn't support DMA address above 4GB traditionally. If memory is more than 4GB, CONFIG_SWIOTLB and ZONE_DMA32 should be selected. In this way, DMA pages are allocated below 4GB preferably. However, if low memory is not enough, high pages are allocated and swiotlb is used for bouncing. Moreover, we provide a platform-specific dma_map_ops::set_dma_mask() to set a device's dma_mask and coherent_dma_mask. We use these masks to distinguishes an allocated page can be used for DMA directly, or need swiotlb to bounce. Recently, we found that 32-bit DMA isn't a hardware bug, but a hardware configuration issue. So, latest firmware has enable the DMA support as high as 40-bit. To support all-memory DMA for all devices (besides the Loongson platform limit, there are still some devices have their own DMA32 limit), and also to be compatible with old firmware, we keep use swiotlb. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6636 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add serial port supportHuacai Chen
Loongson family machines has three types of serial port: PCI UART, LPC UART and CPU internal UART. Loongson-2E and parts of Loongson-2F based machines use PCI UART; most Loongson-2F based machines use LPC UART; Loongson-2G/3A has both LPC and CPU UART but usually use CPU UART. Port address of UARTs: CPU UART: REG_BASE + OFFSET; LPC UART: LIO1_BASE + OFFSET; PCI UART: PCIIO_BASE + OFFSET. Since LPC UART are linked in "Local Bus", both CPU UART and LPC UART are called "CPU provided serial port". Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6635 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add IRQ init and dispatch supportHuacai Chen
IRQ routing path of Loongson-3: Devices(most) --> I8259 --> HT Controller --> IRQ Routing Table --> CPU ^ | Device(legacy devices such as UART) --> Bonito ---| IRQ Routing Table route 32 INTs to CPU's INT0~INT3(IP2~IP5 of CP0), 32 INTs include 16 HT INTs(mostly), 4 PCI INTs, 1 LPC INT, etc. IP6 is used for IPI and IP7 is used for internal MIPS timer. LOONGSON_INT_ROUTER_* are IRQ Routing Table registers. I8259 IRQs are 1:1 mapped to HT1 INTs. LOONGSON_HT1_* are configuration registers of HT1 controller. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6634 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson: Add UEFI-like firmware interface (LEFI) supportHuacai Chen
The new UEFI-like firmware interface (LEFI, i.e. Loongson Unified Firmware Interface) has 3 advantages: 1, Firmware export a physical memory map which is similar to X86's E820 map, so prom_init_memory() will be more elegant that #ifdef clauses can be removed. 2, Firmware export a pci irq routing table, we no longer need pci irq routing fixup in kernel's code. 3, Firmware has a built-in vga bios, and its address is exported, the linux kernel no longer need an embedded blob. With the LEFI interface, Loongson-3A/2G and all their successors can use a unified kernel. All Loongson-based machines support this new interface except 2E/2F series. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6632 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-31MIPS: Loongson 3: Add Lemote-3A machtypes definitionHuacai Chen
Add four Loongson-3 based machine types: MACH_LEMOTE_A1004/MACH_LEMOTE_A1201 are laptops; MACH_LEMOTE_A1101 is mini-itx; MACH_LEMOTE_A1205 is all-in-one machine. The most significant differrent between A1004/A1201 and A1101/A1205 is the laptops have EC but others don't. Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: Hongliang Tao <taohl@lemote.com> Signed-off-by: Hua Yan <yanh@lemote.com> Tested-by: Alex Smith <alex.smith@imgtec.com> Reviewed-by: Alex Smith <alex.smith@imgtec.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/6631 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2013-09-03MIPS: Loongson: Hide the pci code behind CONFIG_PCIMarkos Chandras
The pci.c code depends on symbols which are only visible if CONFIG_PCI is selected. Also fixes the following problem on loongson allnoconfig: arch/mips/built-in.o: In function `pcibios_init': pci.c:(.init.text+0x528): undefined reference to `register_pci_controller' arch/mips/built-in.o:(.data+0xc): undefined reference to `loongson_pci_ops' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5584/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-07-13Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
2013-06-21MIPS: Loongson: Fix random early boot hangAaro Koskinen
Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge device (CS5536 general purpose timer) for the timer interrupt. It starts running early and is already enabled during the PCI configuration, during which there is a small window in pci_read_base() when the register access is temporarily disabled. If the timer interrupts at this point, the system will hang. Fix this by adding a fixup that keeps the register access always enabled. The hang the patch fixes usually looks like this: [ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100 [ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417] [ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff] [ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf] [ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1] [ 28.140000] Modules linked in: [ 28.140000] irq event stamp: 37965 [ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c [ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c [ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258 [ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0 [ 28.140000] Cpu 0 [ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001 [ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011 [ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011 [ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000 [ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000 [ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000 [ 28.140000] $24 : 0000000000000d80 00000000fffedbe0 [ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8 [ 28.140000] Hi : 0000000000d0fc00 [ 28.140000] Lo : 0000000000f82b40 [ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258 [ 28.140000] Not tainted [ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258 [ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE [ 28.140000] Cause : 10008400 [ 28.140000] PrId : 00006303 (ICT Loongson-2) Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4958/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-04cpufreq: rename index as driver_data in cpufreq_frequency_tableViresh Kumar
The "index" field of struct cpufreq_frequency_table was never an index and isn't used at all by the cpufreq core. It only is useful for cpufreq drivers for their internal purposes. Many people nowadays blindly set it in ascending order with the assumption that the core will use it, which is a mistake. Rename it to "driver_data" as that's what its purpose is. All of its users are updated accordingly. [rjw: Changelog] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-22MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-03-20mips: loongson: use GPIO driver on CONFIG_GPIOLIBAlexandre Courbot
The GPIO driver uses gpiolib, thus it should be compiled when CONFIG_GPIOLIB is defined and not only CONFIG_GENERIC_GPIO. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-01MIPS: Loongson 2: Sort out clock managment.Ralf Baechle
For unexplainable reasons the Loongson 2 clock API was implemented in a module so fixing this involved shifting large amounts of code around. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. [ralf@linux-mips.org: Fixed up conflicts in arch/mips/alchemy/common/dbdma.c, arch/mips/cavium-octeon/smp.c and arch/mips/kernel/perf_event.c.] Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> To: linux-kernel@vger.kernel.org Cc: tglx@linutronix.de linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2835/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-31mips: fix implicit smp.h usage in various files.Paul Gortmaker
We need to call out inclusion of smp.h, or with the module.h cleanup we'll get things like: arch/mips/loongson/common/platform.c:21: error: implicit declaration of function 'smp_processor_id' arch/mips/vr41xx/common/giu.c:84: error: implicit declaration of function 'smp_processor_id' arch/mips/vr41xx/common/rtc.c:85: error: implicit declaration of function 'smp_processor_id' Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-21MIPS: Loongson: Mark cascade interrupts IRQF_NO_THREADWu Zhangjin
There are two cascade interrupts in Loongson machines, one for bonito northbridge, another for the 8259A controller in the southbridge. Both want to be non threaded. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/2638/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25MIPS: Remove pointless return statement from empty void functions.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> To: Sergei Shtylyov <sshtylyov@mvista.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2391/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19Merge branch 'timers-clocksource-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: convert mips to generic i8253 clocksource clocksource: convert x86 to generic i8253 clocksource clocksource: convert footbridge to generic i8253 clocksource clocksource: add common i8253 PIT clocksource blackfin: convert to clocksource_register_hz mips: convert to clocksource_register_hz/khz sparc: convert to clocksource_register_hz/khz alpha: convert to clocksource_register_hz microblaze: convert to clocksource_register_hz/khz ia64: convert to clocksource_register_hz/khz x86: Convert remaining x86 clocksources to clocksource_register_hz/khz Make clocksource name const
2011-05-14Merge branch 'consolidate-clksrc-i8253' of ↵Thomas Gleixner
master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource Conflicts: arch/ia64/kernel/cyclone.c arch/mips/kernel/i8253.c arch/x86/kernel/i8253.c Reason: Resolve conflicts so further cleanups do not conflict further Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-10MIPS: Loongson: Fix GCC 2.6.0 build error.Ralf Baechle
CC arch/mips/loongson/common/env.o arch/mips/loongson/common/env.c: In function 'prom_init_env': arch/mips/loongson/common/env.c:50:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] arch/mips/loongson/common/env.c:51:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] arch/mips/loongson/common/env.c:52:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] arch/mips/loongson/common/env.c:53:12: error: variable 'ret' set but not used [-Werror=unused-but-set-variable] cc1: all warnings being treated as errors Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: Loongson: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2196/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Fix always CONFIG_LOONGSON_UART_BASE=yYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2055/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Loongson: Fix potentially wrong string handlingStefan Weil
This error was reported by cppcheck: arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it) If strncpy copied MACHTYPE_LEN bytes, the destination string str was not terminated. The patch adds one more byte to str and makes sure that this byte is always 0. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/2053/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14MIPS: Loongson: Remove ad-hoc cmdline defaultRobert Millan
Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200 root=/dev/hda1". These settings come from a vendor; I remember builds from Lemote branch requiring a "console=tty" override in order to get a working console. At least on Yeeloong, they're particularly useless: there's no external serial port, and the IDE drive is now recognised as /dev/sda. Signed-off-by: Robert Millan <rmh@gnu.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-02-21mips: convert to clocksource_register_hz/khzJohn Stultz
This converts the mips clocksources to use clocksource_register_hz/khz CC: Ralf Baechle <ralf@linux-mips.org> CC: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: John Stultz <johnstul@us.ibm.com>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-12-16MIPS: Loongson: Add return value check for strict_strtoul()Wu Zhangjin
cc1: warnings being treated as errors arch/mips/loongson/common/env.c: In function 'prom_init_env': arch/mips/loongson/common/env.c:49: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:50: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:51: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result arch/mips/loongson/common/env.c:52: error: ignoring return value of 'strict_strtol', declared with attribute warn_unused_result Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/1762/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-11-16suspend: constify platform_suspend_opsLionel Debroux
While at it, fix two checkpatch errors. Several non-const struct instances constified by this patch were added after the introduction of platform_suspend_ops in checkpatch.pl's list of "should be const" structs (79404849e90a41ea2109bd0e2f7c7164b0c4ce73). Patch against mainline. Inspired by hunks of the grsecurity patch, updated for newer kernels. Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-29MIPS: Kconfig cleanupThomas Gleixner
arch/mips/Kconfig already sets GENERIC_HARDIRQS_NO__DO_IRQ unconditionally. Remove the redundant select from the Loongson Kconfig. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Loongson: Remove unused macro LOONGSON_PERFCNT_IRQWu Zhangjin
LOONGSON2_PERFCNT_IRQ is used for the irq number of the performance overflow interrupts; LOONGSON_PERFCNT_IRQ is unused so remove it. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1494/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Loongson: Oprofile: add a new do_perfcnt_IRQ()Wu Zhangjin
On FuLoong-2F IP6 is shared by the performance counter overflow interrupt and the Bonito northbridge interrupt. To reduce overhead only call do_IRQ() when oprofile is enabled to reduce overhead. This patch adds an inline function do_perfcnt_IRQ() to hide the #if's , which can be shared by the other Loongson machines, i.e. gdium. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1492/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Loongson: Remove set_irq_trigger_mode()Wu Zhangjin
set_irq_trigger_mode() is not needed on all platforms so remove it and move the related source code to mach_init_irq(). This will allow gdium to share the common irq.c without adding an empty set_irq_trigger_mode(). Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1493/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Loongson: irq.c: Misc cleanupsShinya Kuribayashi
* Remove unnecessary 'if (int_status & (1 <<10))' statement * s/if (foo != 0)/if (foo)/ * Remove unused 'inst_status &= ~(1 << i);' line Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com> To: wuzhangjin@gmail.com CC: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1433/ Acked-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Loongson: Migrate makefile to new Platform fileWu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> To: linux-mips <linux-mips@linux-mips.org> Cc: Alexander Clouter <alex@digriz.org.uk> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org>, Patchwork: https://patchwork.linux-mips.org/patch/1313/ Patchwork: https://patchwork.linux-mips.org/patch/1326/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: Loongson: Define rtc device on MC146818-equipped systemsArnaud Patard
This patch declare the rtc device present on systems with clock compatible with the mc146818 and handled by rtc-cmos. Introduce a new Kconfig entry because there are some systems without rtc_cmos compatible clock. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Cc: aba@not.so.argh.org Patchwork: http://patchwork.linux-mips.org/patch/1320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: Loongson: CS5536: Fix ISA supportWu Zhangjin
The function _wrmsr() called by divil_lbar_disable()/enable() should be called with the offset as the argument. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Zhang Le <r0bertz@gentoo.org> Patchwork: http://patchwork.linux-mips.org/patch/1252/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: Loongson: Add a missing break statement in CS5536 IDE codeWu Zhangjin
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Zhang Le <r0bertz@gentoo.org> Cc: Hu Hongbing <huhb@lemote.com> Patchwork: http://patchwork.linux-mips.org/patch/1251/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: Loongson: CS5536: Add missing RDMSRs for IDE and USBWu Zhangjin
Add several missing RDMSRs for IDE and USB are missing to avoid the agressive modification of the high 32 bits of the MSR. Without this patch some usb devices may fail after printing "reset ehci host ....." when reading the partition information. Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Zhang Le <r0bertz@gentoo.org> Cc: Hu Hongbing <huhb@lemote.com> Patchwork: http://patchwork.linux-mips.org/patch/1250/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: Loongson 2F: Add gpio/gpioilb supportArnaud Patard
Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jumpWu Zhangjin
The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed the out-of-order issue of Loongson-2F described in chapter 15 of the Loongson2F User Manual [1, 2], but introduced some problems. The option changes all of the jump target to "addr & 0xcfffffff" through the at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is wrong. Avoids the problem via telling the assembler to not use the $at register. [1] Loongson2F User Manual (Chinese Version) http://www.loongson.cn/uploadfile/file/200808211 [2] English Version of Chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source Reported-and-tested-by: Liu Shiwei <liushiwei@gmail.com> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1109/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=mWu Zhangjin
When the oprofile is compiled as a module do_IRQ() is not called in arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1143/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix phys_mem_access_prot() checkArnaud Patard
The check used to determine if uncached accelerated should be used or not is wrong. The parenthesis are misplaced and making the test fail. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1161/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix find_vga_mem_init()Richard LIU
This allows to use all display device for instance DISPLAY_OTHER like SM501. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1160/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Loongson: Fix typo in gdium mach type string.Arnaud Patard
It's not "gidum" but "gdium". Signed-off-by: Arnaud Patard <apatard@mandriva.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1159/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-30MIPS: Fixup screen_info struct initializationsSebastian Andrzej Siewior
|arch/mips/sibyte/swarm/setup.c:153: | warning: large integer implicitly truncated to unsigned type The field was changed in d9b26352 aka ("x86, setup: Store the boot cursor state"). This patch changes the values back they way they were before this extra field got introduced. While here, the other two boards are also converted to C99 initializer. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1137/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 19:23:46 +0000