summaryrefslogtreecommitdiff
path: root/arch/mips/include
AgeCommit message (Collapse)Author
2010-02-27MIPS: Remove unused macros from barrier.hDavid Daney
The smp_llsc_rmb() and smp_llsc_wmb() macros are not used in the tree, remove them. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/848/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Octeon: Add I2C platform device.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org To: linux-i2c@vger.kernel.org To: ben-linux@fluff.org To: khali@linux-fr.org Cc: Rade Bozic <rade.bozic.ext@nsn.com> Patchwork: http://patchwork.linux-mips.org/patch/847/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Simplify param.h by using <asm-generic/param.h>Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/810/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Two-level pagetables for 64-bit kernels with 64KB pages.David Daney
For 64-bit kernels with 64KB pages and two level page tables, there are 42 bits worth of virtual address space This is larger than the 40 bits of virtual address space obtained with the default 4KB Page size and three levels, so there are no draw backs for using two level tables with this configuration. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/761/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Only build AU1000 INTC code for compatible cpusManuel Lauss
Use the GPIO config symbol to only build Au1000 interrupt code on chips with compatible hw. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/670/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: use runtime cpu detection in GPIO code.Manuel Lauss
Remove the cpu subtype cpp macros in favor of runtime detection, to improve compile coverage of the alchemy common code. (Increases kernel size by 700 bytes). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/699/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Add au1000-eth platform deviceFlorian Fainelli
This patch makes the board code register the au1000-eth platform device. The au1000-eth platform data can be overriden with the au1xxx_override_eth_cfg function like it has to be done for the Bosporus board which uses a different MAC/PHY setup. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: David Miller <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: netdev@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/618/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Extended DB1200 board support.Manuel Lauss
Create own directory for DB1200 code and update it with new features. - SPI support: - tmp121 temperature sensor - SPI flash on DB1200 - I2C support - NE1619 sensor - AT24 eeprom - I2C/SPI can be selected at boot time via switch S6.8 - Carddetect IRQs for SD cards. - gen_nand based NAND support. - hexleds count sleep/wake transitions. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove unused SYS area structureManuel Lauss
Nothing in-tree uses it, so get rid of it. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: get rid of superfluous UART definitionsManuel Lauss
Remove unused uart bit definitions and base macros. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: prom_putchar is board dependentManuel Lauss
This patch replaces the general alchemy prom_putchar() implementation in favor of board-specific versions: The UART where the output of prom_putchar is directed to really depends on the board, the current implementation hardcodes this on a per-SoC basis which is just wrong. So a generic uart tx function is provided in the alchemy headers, and the boards can provide their own prom_putchar with custom destination uart, and all in-kernel alchemy boards support early printk. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: change dbdma to accept physical memory addressesManuel Lauss
DMA can only be done from physical addresses; move the "virt_to_phys" source/destination buffer address translation from the dbdma queueing functions (since the hardware can only DMA to/from physical addresses) to their respective users. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove dbdma compat macrosManuel Lauss
Remove dbdma compat macros, move remaining users over to default queueing functions and -flags. (Queueing function signature has changed in order to give a build failure instead of silent functional changes due to the no longer implicitly specified DDMA_FLAGS_IE flag) Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Stop IRQ name sharingManuel Lauss
Eliminate the sharing of IRQ names among the differenct Alchemy variants. IRQ numbers need no longer be hidden behind a CONFIG_SOC_AU1XXX symbol: step 1 in my quest to make the Alchemy code less reliant on a hardcoded subtype. This patch also renames the GPIO irq number constants. It's really an interrupt line, NOT a GPIO number! Code which relied on certain irq numbers to have the same name across all supported cpu subtypes is changed to determine current cpu subtype at runtime; in some places this isn't possible so a "compat" symbol is used. Run-tested on DB1200. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: Simple cpu subtype detectorManuel Lauss
Extract the alchemy chip variant from c0_prid register. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/14/ Patchwork: http://patchwork.linux-mips.org/patch/707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboards: wire up new PCMCIA driver.Manuel Lauss
Register the PCMCIA driver on all boards supported by it, get rid of now-unused pcmcia macros in the board headers (and subsequently empty pb1100/pb1500 ones). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: remove board_init_irq() function.Manuel Lauss
remove board_init_irq(): On all in-kernel boards it is sufficient to initialize board interrupts in an arch_initcall by using the default linux irq functions. Some small irqmap.c files have been folded into board_setup files. Run-tested on DB1200; compile-tested on all other affected boards. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboards: factor out PB1200 IRQ cascade code.Manuel Lauss
Move the PB1200 IRQ cascade code out to the BCSR support code: upcoming DB1300 support can use it too. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-20MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itselfRussell King
On VIVT ARM, when we have multiple shared mappings of the same file in the same MM, we need to ensure that we have coherency across all copies. We do this via make_coherent() by making the pages uncacheable. This used to work fine, until we allowed highmem with highpte - we now have a page table which is mapped as required, and is not available for modification via update_mmu_cache(). Ralf Beache suggested getting rid of the PTE value passed to update_mmu_cache(): On MIPS update_mmu_cache() calls __update_tlb() which walks pagetables to construct a pointer to the pte again. Passing a pte_t * is much more elegant. Maybe we might even replace the pte argument with the pte_t? Ben Herrenschmidt would also like the pte pointer for PowerPC: Passing the ptep in there is exactly what I want. I want that -instead- of the PTE value, because I have issue on some ppc cases, for I$/D$ coherency, where set_pte_at() may decide to mask out the _PAGE_EXEC. So, pass in the mapped page table pointer into update_mmu_cache(), and remove the PTE value, updating all implementations and call sites to suit. Includes a fix from Stephen Rothwell: sparc: fix fallout from update_mmu_cache API change Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-02Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: 64-bit: Detect virtual memory size MIPS: AR7: Fix USB slave mem range typo MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck.
2010-02-02MIPS: 64-bit: Detect virtual memory sizeGuenter Roeck
Linux kernel 2.6.32 and later allocate address space from the top of the kernel virtual memory address space. This patch implements virtual memory size detection for 64 bit MIPS CPUs to avoid resulting crashes. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/935/ Reviewed-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-02Merge branch 'master' into percpuTejun Heo
2010-02-01MIPS: Alchemy: Fix dbdma ring destruction memory debugcheck.Manuel Lauss
DBDMA descriptors need to be located at 32-byte aligned addresses; however kmalloc in conjunction with the SLAB allocator and CONFIG_DEBUG_SLUB enabled doesn't deliver any. The dbdma code works around that by allocating a larger area and realigning the start address within it. When freeing a channel however this adjustment is not taken into account which results in an oops: Kernel bug detected[#1]: [...] Call Trace: [<80186010>] cache_free_debugcheck+0x284/0x318 [<801869d8>] kfree+0xe8/0x2a0 [<8010b31c>] au1xxx_dbdma_chan_free+0x2c/0x7c [<80388dc8>] au1x_pcm_dbdma_free+0x34/0x4c [<80388fa8>] au1xpsc_pcm_close+0x28/0x38 [<80383cb8>] soc_codec_close+0x14c/0x1cc [<8036dbb4>] snd_pcm_release_substream+0x60/0xac [<8036dc40>] snd_pcm_release+0x40/0xa0 [<8018c7a8>] __fput+0x11c/0x228 [<80188f60>] filp_close+0x7c/0x98 [<80189018>] sys_close+0x9c/0xe4 [<801022a0>] stack_done+0x20/0x3c Fix this by recording the address delivered by kmalloc() and using it as parameter to kfree(). This fix is only necessary with the SLAB allocator and CONFIG_DEBUG_SLAB enabled; non-debug SLAB, SLUB do return nicely aligned addresses, debug-enabled SLUB currently panics early in the boot process. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/878/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: PowerTV: Fix support for timer interrupts with > 64 external IRQsDavid VomLehn
The MIPS processor is limited to 64 external interrupt sources. Using a greater number without IRQ sharing requires reading platform-specific registers. On such platforms, reading the IntCtl register to determine which interrupt corresponds to a timer interrupt will not work. On MIPSR2 systems there is a solution - the TI bit in the Cause register, specifically indicates that a timer interrupt has occured. This patch uses that bit to detect interrupts for MIPSR2 processors, which may be expected to work regardless of how the timer interrupt may be routed in the hardware. Signed-off-by: David VomLehn (dvomlehn@cisco.com) To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-28MIPS: PowerTV: Streamline access to platform device registersDavid VomLehn
Pre-compute addresses for the basic ASIC registers. This speeds up access and allows memory for unused configurations to be freed. In addition, uninitialized register addresses will be returned as NULL to catch bad usage quickly. Signed-off-by: David VomLehn <dvomlehn@cisco.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/806/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: cpumask_of_node() should handle -1 as a nodeAnton Blanchard
pcibus_to_node can return -1 if we cannot determine which node a pci bus is on. If passed -1, cpumask_of_node will negatively index the lookup array and pull in random data: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus 00000000,00000003,00000000,00000000 # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 64-65 Change cpumask_of_node to check for -1 and return cpu_all_mask in this case: # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus ffffffff,ffffffff,ffffffff,ffffffff # cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist 0-127 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Patchwork: http://patchwork.linux-mips.org/patch/831/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-05local_t: Remove cpu_local_xx macrosChristoph Lameter
These macros have not been used for awhile now. Signed-off-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2009-12-17Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (71 commits) MIPS: Lasat: Fix botched changes to sysctl code. RTC: rtc-cmos.c: Fix warning on MIPS MIPS: Cleanup random differences beween lmo and Linus' kernel. MIPS: No longer hardwire CONFIG_EMBEDDED to y MIPS: Fix and enhance built-in kernel command line MIPS: eXcite: Remove platform. MIPS: Loongson: Cleanups of serial port support MIPS: Lemote 2F: Suspend CS5536 MFGPT Timer MIPS: Excite: move iodev_remove to .devexit.text MIPS: Lasat: Convert to proc_fops / seq_file MIPS: Cleanup signal code initialization MIPS: Modularize COP2 handling MIPS: Move EARLY_PRINTK to Kconfig.debug MIPS: Yeeloong 2F: Cleanup reset logic using the new ec_write function MIPS: Yeeloong 2F: Add LID open event as the wakeup event MIPS: Yeeloong 2F: Add basic EC operations MIPS: Move several variables from .bss to .init.data MIPS: Tracing: Make function graph tracer work with -mmcount-ra-address MIPS: Tracing: Reserve $12(t0) for mcount-ra-address of gcc 4.5 MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointer ...
2009-12-17Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: kill I_LOCK fold do_sync_file_range into sys_sync_file_range fix up O_SYNC comments VFS/fsstack: handle 32-bit smp + preempt + large files in fsstack_copy_inode_size fsstack/ecryptfs: remove unused get_nlinks param to fsstack_copy_attr_all vfs: remove extraneous NULL d_inode check from do_filp_open fs: no games with DCACHE_UNHASHED fs: anon_inodes implement dname dio: fix use-after-free
2009-12-17fix up O_SYNC commentsChristoph Hellwig
Proper Posix O_SYNC handling only made it into 2.6.33, not 2.6.32. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-17Merge branch 'for-33' of git://repo.or.cz/linux-kbuildLinus Torvalds
* 'for-33' of git://repo.or.cz/linux-kbuild: (29 commits) net: fix for utsrelease.h moving to generated gen_init_cpio: fixed fwrite warning kbuild: fix make clean after mismerge kbuild: generate modules.builtin genksyms: properly consider EXPORT_UNUSED_SYMBOL{,_GPL}() score: add asm/asm-offsets.h wrapper unifdef: update to upstream revision 1.190 kbuild: specify absolute paths for cscope kbuild: create include/generated in silentoldconfig scripts/package: deb-pkg: use fakeroot if available scripts/package: add KBUILD_PKG_ROOTCMD variable scripts/package: tar-pkg: use tar --owner=root Kbuild: clean up marker net: add net_tstamp.h to headers_install kbuild: move utsrelease.h to include/generated kbuild: move autoconf.h to include/generated drop explicit include of autoconf.h kbuild: move compile.h to include/generated kbuild: drop include/asm kbuild: do not check for include/asm-$ARCH ... Fixed non-conflicting clean merge of modpost.c as per comments from Stephen Rothwell (modpost.c had grown an include of linux/autoconf.h that needed to be changed to generated/autoconf.h)
2009-12-17MIPS: eXcite: Remove platform.Ralf Baechle
The platform has never been fully merged Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Koeller <thomas.koeller@baslerweb.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-kernel@vger.kernel.org Cc: linux-mtd@lists.infradead.org Acked-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Wim Van Sebroeck <wim@iguana.be>
2009-12-17MIPS: Loongson: Cleanups of serial port supportWu Zhangjin
This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Cleanup signal code initializationRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/709/
2009-12-17MIPS: Modularize COP2 handlingRalf Baechle
Away with the daemons of ifdef; get ready for future COP2 users. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/708/
2009-12-17MIPS: Yeeloong 2F: Add LID open event as the wakeup eventWu Zhangjin
Yeeloong 2F netbook has an KB3310B embedded controller to manage the LID action. When the LID is closed or opened a SCI interrupt is sent out and the corresponding event is saved to an EC register for later query. Allow the LID open interrupt to wake the processor from wait mode if it is in the suspend mode. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/685/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Make ftrace for MIPS work without -fno-omit-frame-pointerWu Zhangjin
When remove the -fno-omit-frame-pointer, gcc will not save the frame pointer for us, we need to save one ourselves. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/679/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Add IRQENTRY_EXIT section for MIPSWu Zhangjin
This patch add a new section for MIPS to record the block of the hardirq handling for function graph tracer(print_graph_irq) via adding the __irq_entry annotation to the the entrypoints of the hardirqs(the block with irq_enter()...irq_exit()). Thanks goes to Steven & Frederic Weisbecker for their feedbacks. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/676/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Add dynamic function tracer supportWu Zhangjin
With dynamic function tracer, by default, _mcount is defined as an "empty" function, it returns directly without any more action . When enabling it in user-space, it will jump to a real tracing function(ftrace_caller), and do the real job for us. Differ from the static function tracer, dynamic function tracer provides two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the tracing of some indicated kernel functions(set_ftrace_filter). In the -v4 version, the implementation of this support is basically the same as X86 version does: _mcount is implemented as an empty function and ftrace_caller is implemented as a real tracing function respectively. But in this version, to support module tracing with the help of -mlong-calls in arch/mips/Makefile: MODFLAGS += -mlong-calls. The stuff becomes a little more complex. We need to cope with two different type of calling to _mcount. For the kernel part, the calling to _mcount(result of "objdump -hdr vmlinux"). is like this: 108: 03e0082d move at,ra 10c: 0c000000 jal 0 <fpcsr_pending> 10c: R_MIPS_26 _mcount 10c: R_MIPS_NONE *ABS* 10c: R_MIPS_NONE *ABS* 110: 00020021 nop For the module with -mlong-calls, it looks like this: c: 3c030000 lui v1,0x0 c: R_MIPS_HI16 _mcount c: R_MIPS_NONE *ABS* c: R_MIPS_NONE *ABS* 10: 64630000 daddiu v1,v1,0 10: R_MIPS_LO16 _mcount 10: R_MIPS_NONE *ABS* 10: R_MIPS_NONE *ABS* 14: 03e0082d move at,ra 18: 0060f809 jalr v1 In the kernel version, there is only one "_mcount" string for every kernel function, so, we just need to match this one in mcount_regex of scripts/recordmcount.pl, but in the module version, we need to choose one of the two to match. Herein, I choose the first one with "R_MIPS_HI16 _mcount". and In the kernel verion, without module tracing support, we just need to replace "jal _mcount" by "jal ftrace_caller" to do real tracing, and filter the tracing of some kernel functions via replacing it by a nop instruction. but as we have described before, the instruction "jal ftrace_caller" only left 32bit length for the address of ftrace_caller, it will fail when calling from the module space. so, herein, we must replace something else. the basic idea is loading the address of ftrace_caller to v1 via changing these two instructions: lui v1,0x0 addiu v1,v1,0 If we want to enable the tracing, we need to replace the above instructions to: lui v1, HI_16BIT_ftrace_caller addiu v1, v1, LOW_16BIT_ftrace_caller If we want to stop the tracing of the indicated kernel functions, we just need to replace the "jalr v1" to a nop instruction. but we need to replace two instructions and encode the above two instructions oursevles. Is there a simpler solution? Yes! Here it is, in this version, we put _mcount and ftrace_caller together, which means the address of _mcount and ftrace_caller is the same: _mcount: ftrace_caller: j ftrace_stub nop ...(do real tracing here)... ftrace_stub: jr ra move ra, at By default, the kernel functions call _mcount, and then jump to ftrace_stub and return. and when we want to do real tracing, we just need to remove that "j ftrace_stub", and it will run through the two "nop" instructions and then do the real tracing job. what about filtering job? we just need to do this: lui v1, hi_16bit_of_mcount <--> b 1f (0x10000004) addiu v1, v1, low_16bit_of_mcount move at, ra jalr v1 nop 1f: (rec->ip + 12) In linux-mips64, there will be some local symbols, whose name are prefixed by $L, which need to be filtered. thanks goes to Steven for writing the mips64-specific function_regex. In a conclusion, with RISC, things becomes easier with such a "stupid" trick, RISC is something like K.I.S.S, and also, there are lots of "simple" tricks in the whole ftrace support, thanks goes to Steven and the other folks for providing such a wonderful tracing framework! Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/675/ Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Tracing: Add static function tracer support for MIPSWu Zhangjin
If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to _mcount will be inserted into each kernel function. so, there is a possibility to trace the kernel functions in _mcount. This patch add the MIPS specific _mcount support for static function tracing. by default, ftrace_trace_function is initialized as ftrace_stub(an empty function), so, the default _mcount will introduce very little overhead. after enabling ftrace in user-space, it will jump to a real tracing function and do static function tracing for us. and -ffunction-sections is incompatible with -pg, so, disable it when ftracer is enabled. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: zhangfx@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/672/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson 2F: Add CPU frequency scaling supportWu Zhangjin
Loongson 2F supports CPU clock scaling. When put it into wait mode by setting the frequency as ZERO it will stay in this mode until an external interrupt wakes the CPU again. To enable clock scaling support, an external timer of a known stable rate is required. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/660/ Patchwork: http://patchwork.linux-mips.org/patch/751/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add cs5536 MFGPT timer supportWu Zhangjin
CPUFreq support for Loongson 2F requires an external timer. Because the frequency of the MIPS Timer is related to the CPU frequency which itself is variable another timer of constant frequency is required. Export the mfgpt0 counter disable / enable operations for the coming suspend support to suspend / resume the timer. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: cpufreq@vger.kernel.org, Cc: Dave Jones <davej@redhat.com>, Cc: Dominik Brodowski <linux@dominikbrodowski.net>, Cc: yanh@lemote.com Cc: huhb@lemote.com, Patchwork: http://patchwork.linux-mips.org/patch/658/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add Lynloong supportWu Zhangjin
Add a new machtype and kernel options for the Lynloong. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/657/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add NAS supportWu Zhangjin
Kernel support for this machine is almost the same as Fuloong 2F; the only difference is that it uses the serial port provided by Loongson 2F processor as Yeeloong 2F does. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/656/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: PowerTV: Base files for Cisco PowerTV platformDavid VomLehn
Add the Cisco Powertv cable settop box to the MIPS tree. This platform is based on a MIPS 24Kc processor with various devices integrated on the same ASIC. There are multiple models of this box, with differing configuration but the same kernel runs across the product line. Signed-off-by: David VomLehn <dvomlehn@cisco.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/132/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Add support for uncached accelerated mappings.Wu Zhangjin
Loongson2f support video acceleration. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/624/ Patchwork: http://patchwork.linux-mips.org/patch/625/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Loongson 2F: Cleanup the #if clausesWu Zhangjin
This patch adds two new kernel options: CPU_SUPPORTS_CPUFREQ and CPU_SUPPORTS_ADDRWINCFG to describe the new features of Loongons 2F and replaces the several ugly #if clauses by them. These two options will be utilized by the future loongson revisions and related drivers such as the coming Loongson 2F CPUFreq driver. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Lemote 2F: Add reset supportWu Zhangjin
Fuloong 2F, Yeeloong 2F and Menglong 2F have different reset / shutdown logic. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 10:28:17 +0000