summaryrefslogtreecommitdiff
path: root/arch/mips/bcm63xx
AgeCommit message (Collapse)Author
2012-10-09Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS update from Ralf Baechle: "This is the MIPS update for 3.7. A fair chunk of them are platform updates to the Cavium Octeon SOC (which involves machine generated header files of considerable size), Atheros ATH79xx, RMI aka Netlogic aka Broadcom XLP, Broadcom BCM63xx platforms. Support for the commercial MIPS simulator MIPSsim has been removed as MIPS Technologies is shifting away from this product and Qemu is offering various more powerful platforms. The generic MIPS code can now also probe for no-execute / write-only TLB features implemented without the full SmartMIPS extension as permitted by the latest MIPS processor architecture. Lots of small changes to generic code." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (78 commits) MIPS: ath79: Fix CPU/DDR frequency calculation for SRIF PLLs MIPS: ath79: use correct fractional dividers for {CPU,DDR}_PLL on AR934x MIPS: BCM63XX: Properly handle mac address octet overflow MIPS: Kconfig: Avoid build errors by hiding USE_OF from the user. MIPS: Replace `-' in defconfig filename wth `_' for consistency. MIPS: Wire kcmp syscall. MIPS: MIPSsim: Remove the MIPSsim platform. MIPS: NOTIFY_RESUME is not needed in TIF masks MIPS: Merge the identical "return from syscall" per-ABI code MIPS: Unobfuscate _TIF..._MASK MIPS: Prevent hitting do_notify_resume() with !user_mode(regs). MIPS: Replace 'kernel_uses_smartmips_rixi' with 'cpu_has_rixi'. MIPS: Add base architecture support for RI and XI. MIPS: Optimise TLB handlers for MIPS32/64 R2 cores. MIPS: uasm: Add INS and EXT instructions. MIPS: Avoid pipeline stalls on some MIPS32R2 cores. MIPS: Make VPE count to be one-based. MIPS: Add new end of interrupt functionality for GIC. MIPS: Add EIC support for GIC. MIPS: Code clean-ups for the GIC. ...
2012-10-06sections: fix section conflicts in arch/mipsAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-05Merge branch 'master' of git://dev.phrozen.org/mips-next into ↵Ralf Baechle
mips-for-linux-next
2012-10-01MIPS: BCM63XX: Properly handle mac address octet overflowJonas Gorski
While calculating the mac address the pointer for the current octet was never reset back to the least significant one after being decremented because of an octet overflow. This resulted in the code continuing to increment at the current octet, potentially generating duplicate or invalid mac addresses. As a second issue the pointer was allowed to advance up to the most significant octet, modifying the OUI, and potentially changing the type of mac address. Rewrite the code so it resets the pointer to the least significant in each outer loop step, and bails out when the least significant octet of the OUI is reached. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Patchwork: https://patchwork.linux-mips.org/patch/4348/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-09-27Merge branch 'broadcom' of git://dev.phrozen.org/mips-next into ↵Ralf Baechle
mips-for-linux-next
2012-08-30MIPS: BCM63XX: Create platform_device for USBDKevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Reviewed-by: Jonas Gorski <jonas.gorski@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4111/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-30MIPS: BCM63XX: Expose the USBH/USBD clocks on BCM6328/BCM6368Kevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4022/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-24MIPS: BCM63XX: use a switch for external irq configMaxime Bizon
Makes the code a bit more readable and easier to add support for new chips. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4093/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-24MIPS: BCM63XX: don't write to the chipid register on rebootMaxime Bizon
While harmless, it is bad style to do so. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4092/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-24MIPS: BCM63XX: add external irq support for BCM6345Maxime Bizon
Add the missing definitions for BCM6345. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/4091/ Signed-off-by: John Crispin <blogic@openwrt.org>
2012-08-17MIPS: BCM63xx: Fix SPI message control register handling for BCM6338/6348.Florian Fainelli
BCM6338 and BCM6348 have a message control register width of 8 bits, instead of 16-bits like what the SPI driver assumes right now. Also the SPI message type shift value of 14 is actually 6 for these SoCs. This resulted in transmit FIFO corruption because we were writing 16-bits to an 8-bits wide register, thus spanning on the first byte of the transmit FIFO, which had already been filed in bcm63xx_spi_fill_txrx_fifo(). Fix this by passing the message control register width and message type shift through platform data back to the SPI driver so that it can use it properly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Cc: jonas.gorski@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/3983/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add 96328avng reference boardJonas Gorski
This allows booting to command line. Ethernet is not supported yet, but PCIe connected wireless should work. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3958/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add PCIe Support for BCM6328Jonas Gorski
Add support for the PCIe port found on BCM6328. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3956/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add basic BCM6328 supportJonas Gorski
This includes CPU speed, memory size detection and working UART, but lacking the appropriate drivers, no support for attached flash. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3951/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Use the Chip ID register for identifying the SoCJonas Gorski
Newer BCM63XX SoCs use virtually the same CPU ID, differing only in the revision bits. But since they all have the Chip ID register at the same location, we can use that to identify the SoC we are running on. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3955/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Add flash type detectionJonas Gorski
On BCM6358 and BCM6368 the attached flash type is exposed through a bootstrapping register. Use it for auto detecting the flash type on those and default to parallel flash for earlier SoCs. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3954/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Move flash registration out of board_bcm963xx.cJonas Gorski
board_bcm963xx.c is already large enough. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Cc: linux-mips@linux-mips.org Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/3952/ Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add RNG driver platform_device stubFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3325/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: add support for "ipsec" clockFlorian Fainelli
This module is only available on BCM6368 so far and does not require resetting the block. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: mpm@selenic.com Cc: herbert@gondor.apana.org.au Patchwork: https://patchwork.linux-mips.org/patch/3324/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-24MIPS: BCM63XX: Fix platform_devices idFlorian Fainelli
There is only one watchdog and VoIP DSP platform devices per board, use -1 as the platform_device id accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3313/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Make board setup code register the spi platform deviceFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3317/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Add stub to register the SPI platform driverFlorian Fainelli
This patch adds the necessary stub to register the SPI platform driver. Since the registers are shuffled between the 4 BCM63xx CPUs supported by this SPI driver we also need to generate the internal register layout and export this layout for the driver to use it properly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3321/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63xx: Add BCM6368 SPI clock maskFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: grant.likely@secretlab.ca Cc: spi-devel-general@lists.sourceforge.net Patchwork: https://patchwork.linux-mips.org/patch/3319/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-23MIPS: BCM63XX: Be consistent in clock bits enable namingFlorian Fainelli
Remove the _CLK suffix from the BCM6368 clock bits definitions to be consistent with what is already present. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3312/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-19mips: mark const init data with __initconst instead of __initdataUwe Kleine-König
As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel@pengutronix.de Patchwork: https://patchwork.linux-mips.org/patch/3565/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-05-21MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-02-05mips: Fix typo in bcm63xx/setup.cMasanari Iida
Correct spelling "reseting" to "resetting" in arch/mips/bcm63xx/setup.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-14Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile
2012-01-09MIPS: BCM63XX: use the new bcm63xxpart parserJonas Gorski
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-12-07MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.Florian Fainelli
In case the MAC address pool is not big enough to also register a WLAN device prefer registering the Ethernet devices. [ralf@linux-mips.org: Fixed formatting as per Sergei's complaint.] Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63xx: Fix GPIO set/get for BCM6345Florian Fainelli
On BCM6345, the register offsets for the set/get GPIO registers is wrong. Use the same logic as the one present in arch/mips/bcm63xx/irq.c to define the correct gpio_out_low_reg value when support for BCM6345 is compiled in. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3010/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63xx: Remove BCM6345 hacks to read base boot addressFlorian Fainelli
Though BCM6345 does not technically have the same MPI register layout than the other SoCs, reading the chip-select registers is done the same way, and particularly for chip-select 0, which is the boot flash. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63xx: Fix SDRAM size computation for BCM6345Florian Fainelli
Instead of hardcoding the amount of available RAM, read the number of effective multiples of 8MB from SDRAM_MBASE_REG. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3008/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Add support for bcm6368 CPU.Maxime Bizon
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Add external irq support for non 6348 CPUs.Maxime Bizon
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2899/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Handle 64 bits irq stat register in irq code.Maxime Bizon
bcm6368 has larger irq registers, prepare for this. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2898/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Prepare irq code to handle different external irq hardware ↵Maxime Bizon
implementation. External irq only works for 6348, change code to prepare support of other CPUs. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2895/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Change irq code to prepare for per-cpu peculiarity.Maxime Bizon
No functionnal change is introduced by this patch. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2894/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Cleanup cpu registers.Maxime Bizon
Use preprocessor when possible to avoid duplicated and error-prone code. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2897/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: BCM63XX: Call board_register_device from device_initcall()Maxime Bizon
Some device registration (eg leds), expect subsystem initcall to be run first, so move board device registration to device_initcall(). Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2891/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Mark cascade and low level interrupts IRQF_NO_THREADWu Zhangjin
Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19SSB: Change fallback sprom to callback mechanism.Hauke Mehrtens
Some embedded devices like the Netgear WNDR3300 have two SSB based cards without an own sprom on the pci bus. We have to provide two different fallback sproms for these and this was not possible with the old solution. In the bcm47xx architecture the sprom data is stored in the nvram in the main flash storage. The architecture code will be able to fill the sprom with the stored data based on the bus where the device was found. The bcm63xx code should do the same thing as before, just using the new API. Acked-by: Michael Buesch <mb@bu3sch.de> Cc: netdev@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2362/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: bcm63xx: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2176/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-17mips: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2010-10-29MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC codeKevin Cernekee
BMIPS processor cores are used in 50+ different chipsets spread across 5+ product lines. In many cases the chipsets do not share the same peripheral register layouts, the same register blocks, the same interrupt controllers, the same memory maps, or much of anything else. But, across radically different SoCs that share nothing more than the same BMIPS CPU, a few things are still mostly constant: SMP operations Access to performance counters DMA cache coherency quirks Cache and memory bus configuration So, it makes sense to treat each BMIPS processor type as a generic "building block," rather than tying it to a specific SoC. This makes it easier to support a large number of BMIPS-based chipsets without unnecessary duplication of code, and provides the infrastructure needed to support BMIPS-proprietary features. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: mbizon@freebox.fr Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Tested-by: Florian Fainelli <ffainelli@freebox.fr> Patchwork: https://patchwork.linux-mips.org/patch/1706/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: BCM63xx: Migrate to new platform makefile style.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-26MIPS: BCM63xx: Prevent second enet registration on BCM6338Florian Fainelli
This SoC has only one ethernet MAC, so prevent registration of a second one. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: BCM63xx: Avoid namespace clash on GPIO_DIR_{IN,OUT}Florian Fainelli
This is too generic a name, so prefix it with BCM63XX_ to avoid potential namespace clashes when including <asm/gpio.h>. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1171/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 14:10:51 +0000