summaryrefslogtreecommitdiff
path: root/arch/mips/ar7
AgeCommit message (Collapse)Author
2016-02-19MIPS: ar7: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Cc: Alban Bedel <albeu@free.fr> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-24MIPS: ar7: Be sure to clamp return valueLinus Walleij
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Alban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11922/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for 4.3 for MIPS. Here's the summary: Three fixes that didn't make 4.2-stable: - a -Os build might compile the kernel using the MIPS16 instruction set but the R2 optimized inline functions in <uapi/asm/swab.h> are implemented using 32-bit wide instructions which is invalid. - a build error in pgtable-bits.h for a particular kernel configuration. - accessing registers of the CM GCR might have been compiled to use 64 bit accesses but these registers are onl 32 bit wide. And also a few new bits: - move the ATH79 GPIO driver to drivers/gpio - the definition of IRQCHIP_DECLARE has moved to linux/irqchip.h, change ATH79 accordingly. - fix definition of pgprot_writecombine - add an implementation of dma_map_ops.mmap - fix alignment of quiet build output for vmlinuz link - BCM47xx: Use kmemdup rather than duplicating its implementation - Netlogic: Fix 0x0x prefixes of constants. - merge Bjorn Helgaas' series to remove most of the weak keywords from function declarations. - CP0 and CP1 registers are best considered treated as unsigned values to avoid large values from becoming negative values. - improve support for the MIPS GIC timer. - enable common clock framework for Malta and SEAD3. - a number of improvments and fixes to dump_tlb(). - document the MIPS TLB dump functionality in Magic SysRq. - Cavium Octeon CN68XX improvments. - NetLogic improvments. - irq: Use access helper irq_data_get_affinity_mask. - handle MSA unaligned accesses. - a number of R6-related math-emu fixes. - support for I6400. - improvments to MSA support. - add uprobes support. - move from deprecated __initcall to arch_initcall. - remove finish_arch_switch(). - IRQ cleanups by Thomas Gleixner. - migrate to new 'set-state' interface. - random small cleanups" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (148 commits) MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16. MIPS: Fix alignment of quiet build output for vmlinuz link MIPS: math-emu: Remove unused handle_dsemul function declaration MIPS: math-emu: Add support for the MIPS R6 MAX{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 MIN{, A} FPU instruction MIPS: math-emu: Add support for the MIPS R6 CLASS FPU instruction MIPS: math-emu: Add support for the MIPS R6 RINT FPU instruction MIPS: math-emu: Add support for the MIPS R6 MSUBF FPU instruction MIPS: math-emu: Add support for the MIPS R6 MADDF FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELNEZ FPU instruction MIPS: math-emu: Add support for the MIPS R6 SELEQZ FPU instruction MIPS: math-emu: Add support for the CMP.condn.fmt R6 instruction MIPS: inst.h: Add new MIPS R6 FPU opcodes MIPS: Octeon: Fix management port MII address on Kontron S1901 MIPS: BCM47xx: Use kmemdup rather than duplicating its implementation STAGING: Octeon: Use common helpers for determining interface and port MIPS: Octeon: Support interfaces 4 and 5 MIPS: Octeon: Set up 1:1 mapping between CN68XX PKO queues and ports MIPS: Octeon: Initialize CN68XX PKO STAGING: Octeon: Support CN68XX style WQE ...
2015-09-03MIPS: Remove all the uses of custom gpio.hAlban Bedel
Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel <albeu@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Tejun Heo <tj@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Daniel Walter <dwalter@google.com> Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Varka Bhadram <varkabhadram@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Michael Buesch <m@bues.ch> Cc: abdoulaye berthe <berthe.ab@gmail.com> Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-08-31phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn
An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02MIPS: AR7: Replace mac address parsingDaniel Walter
Replace sscanf() with mac_pton(). [ralf@linux-mips.org: Resolved conflict.] Signed-off-by: Daniel Walter <dwalter@google.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7151/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24mips: Convert pr_warning to pr_warnJoe Perches
Use the much more common pr_warn instead of pr_warning with the goal of removing pr_warning eventually. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Cc: linux-mips <linux-mips@linux-mips.org> Cc: LKML <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/7935/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-03-26MIPS: Restore init.h usage to arch/mips/ar7/time.cPaul Gortmaker
Commit 0046be10e0c502705fc74d91408eba13a73bc201 ("mips: delete non-required instances of include <linux/init.h>") inadvertently removed an include that was actually correct. Restore it. Note that it gets init.h implicitly anyway, so this is largely a cosmetic fixup; no build regressions were caused by this. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6416/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-24mips: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
2013-11-26MIPS: Remove panic_timeout settingsRalf Baechle
Now that we have a CONFIG_PANIC_TIMEOUT=x setting, remove the mips settings. The default is 0, which means don't reboot on panic. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Shinya Kuribayashi <skuribay@pobox.com> Signed-off-by: Jason Baron <jbaron@akamai.com> Cc: benh@kernel.crashing.org Cc: paulus@samba.org Cc: mpe@ellerman.id.au Cc: felipe.contreras@gmail.com Cc: linux-mips@linux-mips.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/d19dc75fca343ec5d9ada75a1400f57330021976.1385418410.git.jbaron@akamai.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-08MIPS: FW: Remove obsolete header file for MTI platforms.Steven J. Hill
Remove 'arch/mips/include/asm/mips-boards/prom.h' and get rid of all inclusions of it by Malta and SEAD-3 platforms. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: ar7 powertv build"]. [ralf@linux-mips.org: Fold in John Crispin <blogic@openwrt.org>'s "MIPS: unbreak powertv build"]. [ralf@linux-mips.org: Test. Build. Your. Fscking. Code. Or...] Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
2013-02-01MIPS: Whitespace cleanup.Ralf Baechle
Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-13MIPS: AR7: use part_probe_types to specificy the partition parser to useFlorian Fainelli
This patch changes the physmap-flash platform data on AR7 to pass the correct partition parser: ar7part to used by the "physmap-flash" mapping driver so we get the partitions probed correctly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: blogic@openwrt.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-07-16arch: Use eth_random_addrJoe Perches
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-11Merge branches 'next/ar7', 'next/ath79', 'next/bcm63xx', 'next/bmips', ↵Ralf Baechle
'next/cavium', 'next/generic', 'next/kprobes', 'next/lantiq', 'next/perf' and 'next/raza' into mips-for-linux-next
2011-12-07MIPS: AR7: add LEDs layout for the Actiontec GT701 routerFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2981/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: AR7: constify some arrays in gpio and prom codeFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2980/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07MIPS: Fix up inconsistency in panic() string argument.Ralf Baechle
Panic() invokes printk() to add a \n internally, so panic arguments should not themselves end in \n. Panic invocations in arch/mips and elsewhere are inconsistently sometimes terminating in \n, sometimes not. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21MIPS: Mark cascade and low level interrupts IRQF_NO_THREADWu Zhangjin
Mark interrupts with no_action handler, cascade interrupts, low level interrupts (bus error, halt ..) with IRQF_NO_THREAD to exclude them from forced threading. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25MIPS: AR7: Replace __attribute__((__packed__)) with __packedFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2491/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-07-25MIPS: AR7: Remove 'space before tabs' in platform.cFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20MIPS: AR7: Fix trailing semicolon bug in clock.cFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18MIPS: AR7: Fix GPIO register size for Titan variant.Florian Fainelli
The 'size' variable contains the correct register size for both AR7 and Titan, but we never used it to ioremap the correct register size. This problem only shows up on Titan. [ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork recognizes the problem correctly then fails to fix it ...] Reported-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/2380/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-29MIPS: Convert the irq functions to the new namesThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25MIPS: AR7: Convert to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2174/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-12-16MIPS: AR7: Fix loops per jiffies on TNETD7200 devicesFlorian Fainelli
TNETD7200 run their CPU clock faster than the default CPU clock we assume. In order to have the correct loops per jiffies settings, initialize clocks right before setting mips_hpt_frequency. As a side effect, we can no longer use msleep in clocks.c which requires other parts of the kernel to be initialized, so replace these with mdelay. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/1749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-10-29MIPS: AR7: Add support for Titan (TNETV10xx) SoC variantFlorian Fainelli
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost completely identical to AR7 except on a few points: - a second bank of gpios is available - vlynq0 on titan is vlynq1 on ar7 - different PHY addresses for cpmac0 This SoC can be found on commercial products like the Linksys WRTP54G Original patch by Xin with improvments by Florian. Signed-off-by: Xin Zhen <xlonestar2000@aim.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1563/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-10-29MIPS: AR7: Initialize GPIO earlierFlorian Fainelli
In order to detect the Titan variant, we must initialize GPIOs earlier since detection relies on some GPIO values to be set. Signed-off-by: Florian Fainelli <florian@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/1562/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-10-07MIPS: Add missing #inclusions of <linux/irq.h>David Howells
Add missing #inclusions of <linux/irq.h> to a whole bunch of files that should really include it. Note that this can replace #inclusions of <asm/irq.h>. This is required for the patch to sort out irqflags handling function naming to compile on MIPS. The problem is that these files require access to things like setup_irq() - which isn't available by #including <linux/interrupt.h> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: AR7: rewrite of cpmac_get_mac()Alexander Clouter
Shamelessly stealing wisdom from pasemi_mac.c, I found char2hex() could be replaced with a single call to sscanf(), looks cleaner to me at least. The result is 100 bytes trimmed off the size of a compiled cpmac_get_mac() and as an extra bonus it grumbles and gracefully fails over to using random_ether_addr() when an attempt to parse an invalid MAC address is made. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Cc: florian@openwrt.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05MIPS: Introduce support for Platform definitionsSam Ravnborg
Move platform specific definitions to the platfrom directories. Each platform shall do the following: 1) include an entry in arch/mips/Kbuild.platforms 2) add relevant definitions to arch/mips/<platform>/Platform This commits changes ar7 to the new scheme as an example. Introducing a platform speecific Platfrom file has following advantages: 1) decentralization of platfrom definitions 2) simplification af arch/mips/Makefile 3) force all platfrom to build with -Werror (done in arch/mips/Kbuild) [Ralf: Remove forgotten -Werror from AR7 Makefile] Signed-off-by: Sam Ravnborg <sam@ravnborg.org> To: linux-mips <linux-mips@linux-mips.org> To: Wu Zhangjin <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/1302/ Patchwork: http://patchwork.linux-mips.org/patch/1308/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-07-05MIPS: AR7: Use correct UART port typeFlorian Fainelli
PORT_AR7 has the correct TRIG flag (UART_FCR_R_TRIG_00) as well as UART_CAP_AFE being set. This fixes UART on TNETD7300 revision 0x02, which would otherwise mangle some characters, no side effects on other revisions. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1246/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: AR7: prevent race between clock initialization and devices registrationFlorian Fainelli
ar7_regiser_devices needs ar7_clocks_init to have been called first, however clock.o is currently linked later due to its order in the Makefile, therefore ar7_clocks_init always gets called later than ar7_register_devices because both have the same initcall level. Fix this by moving ar7_register_devices to the right initcall level. Reported-by: Michael J. Evans <mjevans1983@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1212/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-05-21MIPS: AR7: use ar7_has_high_vlynq() to determine watchdog base addressFlorian Fainelli
Instead of doing yet another switch/case on the chip_id, use existing inline function to set the watchdog base address. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1211/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: AR7: Fix phat finger of cpmac fixed_phy_addAlexander Clouter
Seems I trimmed one too many lines in 29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp 7084338eb8eb0cc021ba86c340157bad397f3f0b (kernel.org) which led to no functioning Ethernet on my WAG54Gv2. This patch restores the AWOL line. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1065/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-12MIPS: AR7: Fix phat finger of reset bit in vlynq_high_dataAlexander Clouter
Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3 (lmo) rsp. 8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7 to no longer get as far as init. Fixed my phat fingering. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1064/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Make ar7_register_devices much more durableAlexander Clouter
[Ralf: Fixed up the rejects and changed all the new printk(KERN_...); to pr_xxx() as suggested by Wu.] Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/920/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Fix USB slave mem range typoAlexander Clouter
Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/919/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Whitespace hackingAlexander Clouter
[Ralf: Fixed up reject and Wu's complaints about comment style.] Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/921/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Implement clock APIFlorian Fainelli
This patch makes the ar7 clock code implement the Linux clk API. Drivers using the various clocks available in the SoC are updated accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> To: linux-mips@linux-mips.org Cc: Wim Van Sebroeck <wim@iguana.be> Cc: netdev@vger.kernel.org Cc: David Miller <davem@davemloft.net> Patchwork: http://patchwork.linux-mips.org/patch/881/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: Implement gpiolibFlorian Fainelli
This patch implements gpiolib for the AR7 SoC. Signed-off-by: Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/816/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: replace prom_getcmdline() to arcs_cmdline[]Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/872/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: AR7: use strlcat() for the command line argumentsYoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/871/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Nuke trailing blank linesRalf Baechle
Recent git versions now warn about those and they've always been a bit of an annoyance. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-01MIPS: AR7: Fix USB slave mem range typoAlexander Clouter
Signed-off-by: Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/919/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: AR7: Remove unused prom_getchar()Yoichi Yuasa
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/811/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-01-12MIPS: AR7: Remove kgdb_enabledYoichi Yuasa
An unused leftover from the old KGDB implementation. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/794/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-12-17MIPS: Move several variables from .bss to .init.dataDmitri Vorobiev
Several static uninitialized variables are used in the scope of __init functions but are themselves not marked as __initdata. This patch is to put those variables to where they belong and to reduce the memory footprint a little bit. Also, a couple of lines with spaces instead of tabs were fixed. Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/698/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-02MIPS: AR7: register watchdog device only if enabled in hw configurationFlorian Fainelli
This patch checks if the watchdog enable bit is set in the DCL register meaning that the hardware watchdog actually works and if so, register the ar7_wdt platform_device. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 10:12:29 +0000