summaryrefslogtreecommitdiff
path: root/arch/microblaze/kernel/cpu/cpuinfo.c
AgeCommit message (Collapse)Author
2016-11-15microblaze: Add new fpga familiesMichal Simek
Add new fpga families where Microblaze can run on. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15microblaze: Add missing release version code v9.6 and v10Michal Simek
Add missing release version code for v9.6 and v10.0. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-06-08microblaze: Add missing release version codeMichal Simek
Add missing release version code for v9.4 and v9.5. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-08microblaze: Add target architectureMichal Simek
Add missing target architectures - virtex7, ultrascale virtex and ultrascale kintex. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-01-08microblaze: Add missing PVR version codesErico Nunes
PVR version code was missing in the cpu_ver_lookup table for the following versions: 8.50.b 8.50.c 9.2 9.3 This caused /proc/cpuinfo to display "CPU-Ver: Unknown" for these versions. This was detected and the patch tested with MicroBlaze version 8.50.c. The other codes were taken from the Xilinx MicroBlaze Processor Reference Guides UG081 (v14.7) and UG984 (v2014.1). Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27microblaze: Add missing v8.50.a versionMichal Simek
Add PVR value for MB 8.50.a. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27microblaze: Add support for CCFMichal Simek
Add support for CCF for Microblaze. Old binding: system_timer: system-timer@41c00000 { clock-frequency = <75000000>; ... } New binding: system_timer: system-timer@41c00000 { clocks = <&clk_bus>; ... } Both should be supported for a while Microblaze clock binding: clocks { #address-cells = <1>; #size-cells = <0>; clk_bus: bus { #clock-cells = <0>; clock-frequency = <75000000>; clock-output-names = "bus"; compatible = "fixed-clock"; reg = <1>; } ; clk_cpu: cpu { #clock-cells = <0>; clock-frequency = <75000000>; clock-output-names = "cpu"; compatible = "fixed-clock"; reg = <0>; } ; } ; Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-09-03microblaze: Add PVR version string for MB v9.0 and v9.1Michal Simek
Extend PVR reg decoding. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09microblaze: Add support for new cpu versions and target architectureMichal Simek
Update PVR values based on reference manual. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-02-12microblaze: Fix coding style issuesMichal Simek
Fix coding style issues reported by checkpatch.pl. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-03-19microblaze: Add PVR version string for MB 8.20.b and 8.30.aMichal Simek
Just extend PVR reg decoding. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-10-14microblaze: Add PVR for Microblaze v8.20.aMichal Simek
Microblaze v8.20.a has 0x15 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-07-25microblaze: Unprivileged stream instruction awarenessJohn A. Williams
Add cpuinfo support for the new MicroBlaze option permitting userspace (unprivileged) access to the streaming instructions (FSL / AXI-stream). Emit a noisy warning at bootup if this is enabled, because bad user code can potentially lockup the CPU. Signed-off-by: John A. Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-03-09microblaze: Add PVR for Microblaze v8.10.aMichal Simek
Microblaze v8.10.a has 0x14 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
2011-01-03microblaze: Add PVR for Microblaze v8.00.bMichal Simek
Microblaze v8.00.b have 0x13 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-10-21microblaze: Add new microblaze versionsMichal Simek
PVR for 7.30.b, 8.00.a versions. Signed-off-by: Michal Simek <monstr@monstr.eu>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-12-14microblaze: Add PVR for Microblaze v7.30.aMichal Simek
Microblaze v7.30.a will have 0x10 version string. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Remove ancient and fake microblaze version from cpu_ver tableMichal Simek
We need to continue with next microblaze PVR version that's why I have to remove that ancient version. These version strings not match any versions. From Microblaze v5.00.a is possible to use this style. I believe that none use ancients versions. If yes they will be just labeled as unknown version. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-12-14microblaze: Detect new 7.20.d versionMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-09-22microblaze: Updated CPU version and FPGA family codes in PVRJohn Williams
Signed-off-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-27microblaze: Detect new Microblaze 7.20 versionsMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-04-23microblaze: Do not use PVR configuration for broken MB versionMichal Simek
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-03-27microblaze_v8: Cpuinfo handlingMichal Simek
Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu>