summaryrefslogtreecommitdiff
path: root/arch/microblaze/Kconfig
AgeCommit message (Collapse)Author
2014-12-13gcov: enable GCOV_PROFILE_ALL from ARCH KconfigsRiku Voipio
Following the suggestions from Andrew Morton and Stephen Rothwell, Dont expand the ARCH list in kernel/gcov/Kconfig. Instead, define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures can enable. set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was previously allowed + ARM64 which I tested. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-27microblaze: Fix missing NR_CPUS in menuconfigMichal Simek
The time Kconfig expects that NR_CPUS is defined. This patch remove this config warning: "kernel/time/Kconfig:163:warning: range is invalid" Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09microblaze: Rename Advance setup to Kernel featuresMichal Simek
"Advance setup: menu is misleading that's why rename it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-09-09microblaze: Add mm/Kconfig to advance menuMichal Simek
mm/Kconfig is getting too big to be in root menu. Move it to submenu. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-18microblaze: ftrace: Remove check of obsolete variable function_trace_stopSteven Rostedt (Red Hat)
Nothing sets function_trace_stop to disable function tracing anymore. Remove the check for it in the arch code. Link: http://lkml.kernel.org/r/53C8D82B.4030204@monstr.eu Tested-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-04-07microblaze: Remove platform folderMichal Simek
There is no reason to use platform folder structure now. Everything is OF driven. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-04-07microblaze: Sort Kconfig optionsMichal Simek
Kconfig options should be sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-28Merge tag 'microblaze-3.14-rc1' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze patches from Michal Simek: - add CCF support - fix BS=0 compilation - wire up defconfig - some minor cleanups and fixes * tag 'microblaze-3.14-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add missing v8.50.a version microblaze: Fix missing bracket in printk microblaze: Fix compilation error for BS=0 microblaze: Disable stack protection from bootloader microblaze: Define read/write{b,w,l}_relaxed MMIO microblaze: timer: Do not initialized system timer twice microblaze: timer: Use generic sched_clock implementation microblaze: Add NOTES section to linker script microblaze: Add support for CCF microblaze: Simplify fcpu helper function microblaze/uapi: Use Kbuild logic to include <asm-generic/types.h> microblaze: Remove duplicate declarations of _stext[] and _etext[] microblaze: Remove _fdt_start casts microblaze: Wire up defconfig to mmu_defconfig
2014-01-27microblaze: timer: Use generic sched_clock implementationMichal Simek
Remove sched_clock from the driver and use sched_clock_register function. Inspired-by: "arch_timer: Move to generic sched_clock framework" (sha1: 65cd4f6c99c1170bd0114dbd71b978012ea44d28) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-27microblaze: Add support for CCFMichal Simek
Add support for CCF for Microblaze. Old binding: system_timer: system-timer@41c00000 { clock-frequency = <75000000>; ... } New binding: system_timer: system-timer@41c00000 { clocks = <&clk_bus>; ... } Both should be supported for a while Microblaze clock binding: clocks { #address-cells = <1>; #size-cells = <0>; clk_bus: bus { #clock-cells = <0>; clock-frequency = <75000000>; clock-output-names = "bus"; compatible = "fixed-clock"; reg = <1>; } ; clk_cpu: cpu { #clock-cells = <0>; clock-frequency = <75000000>; clock-output-names = "cpu"; compatible = "fixed-clock"; reg = <0>; } ; } ; Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-23microblaze: extable: sort the exception table at build timeMichal Simek
Sort the exception table at build-time rather than during boot. Microblaze is the same case as AARCH64 that's why EM_MICROBLAZE conditional check was added to allow cross-compilation on machines which are not running the latest libc-dev. Inspired by AARCH64 commit adace89562c7 ("arm64: extable: sort the exception table at build time"). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: David Daney <david.daney@cavium.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds
Pull Kconfig cleanups from Mark Salter: "Remove some unused config options from C6X and clean up PC_PARPORT dependencies. The latter was discussed here: https://lkml.org/lkml/2013/10/8/12" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: remove unused COMMON_CLKDEV Kconfig parameter Kconfig cleanup (PARPORT_PC dependencies) x86: select ARCH_MIGHT_HAVE_PC_PARPORT unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT sparc: select ARCH_MIGHT_HAVE_PC_PARPORT sh: select ARCH_MIGHT_HAVE_PC_PARPORT powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT parisc: select ARCH_MIGHT_HAVE_PC_PARPORT mips: select ARCH_MIGHT_HAVE_PC_PARPORT microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT m68k: select ARCH_MIGHT_HAVE_PC_PARPORT ia64: select ARCH_MIGHT_HAVE_PC_PARPORT arm: select ARCH_MIGHT_HAVE_PC_PARPORT alpha: select ARCH_MIGHT_HAVE_PC_PARPORT c6x: remove unused parameter in Kconfig
2013-11-07microblaze: Calculate kernel pad automaticallyMichal Simek
The kernel needs to setup the first two tlbs with pad which is used for early page allocation which is used by mapin_ram() to allocate tables for lowmem memory before memory initialisation is done. Calculate pad directly from lowmem size. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-11-06microblaze: Remove unused NO_MMU Kconfig parameterMichael Opdenacker
This removes the NO_MMU Kconfig parameter, which was no longer used anywhere in the source code and Makefiles. This also updates a comment refering to this parameter. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-10-23microblaze: select ARCH_MIGHT_HAVE_PC_PARPORTMark Salter
Architectures which support CONFIG_PARPORT_PC should select ARCH_MIGHT_HAVE_PC_PARPORT. Signed-off-by: Mark Salter <msalter@redhat.com> CC: Michal Simek <monstr@monstr.eu> CC: microblaze-uclinux@itee.uq.edu.au
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-03microblaze: timer: Use CLKSRC_OF initializationMichal Simek
Simplify timer initialization and prepare the driver for moving to drivers/clocksource folder. Also remove system-timer property from binding because the name is too generic. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-08-13microblaze: fix clone syscallMichal Simek
Fix inadvertent breakage in the clone syscall ABI for Microblaze that was introduced in commit f3268edbe6fe ("microblaze: switch to generic fork/vfork/clone"). The Microblaze syscall ABI for clone takes the parent tid address in the 4th argument; the third argument slot is used for the stack size. The incorrectly-used CLONE_BACKWARDS type assigned parent tid to the 3rd slot. This commit restores the original ABI so that existing userspace libc code will work correctly. All kernel versions from v3.8-rc1 were affected. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-09Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull removal of GENERIC_GPIO from Grant Likely: "GENERIC_GPIO now synonymous with GPIOLIB. There are no longer any valid cases for enableing GENERIC_GPIO without GPIOLIB, even though it is possible to do so which has been causing confusion and breakage. This branch does the work to completely eliminate GENERIC_GPIO." * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux: gpio: update gpio Chinese documentation Remove GENERIC_GPIO config option Convert selectors of GENERIC_GPIO to GPIOLIB blackfin: force use of gpiolib m68k: coldfire: use gpiolib mips: pnx833x: remove requirement for GENERIC_GPIO openrisc: default GENERIC_GPIO to false avr32: default GENERIC_GPIO to false xtensa: remove explicit selection of GENERIC_GPIO sh: replace CONFIG_GENERIC_GPIO by CONFIG_GPIOLIB powerpc: remove redundant GENERIC_GPIO selection unicore32: default GENERIC_GPIO to false unicore32: remove unneeded select GENERIC_GPIO arm: plat-orion: use GPIO driver on CONFIG_GPIOLIB arm: remove redundant GENERIC_GPIO selection mips: alchemy: require gpiolib mips: txx9: change GENERIC_GPIO to GPIOLIB mips: loongson: use GPIO driver on CONFIG_GPIOLIB mips: remove redundant GENERIC_GPIO select
2013-04-30Merge tag 'metag-for-v3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag Pull arch/metag update from James Hogan: - Various fixes for the interrupting perf counter handling in metag's perf backend. - Add OProfile support based on perf. - Sets up cache partitions for SMP so bootloader doesn't have to. - Patch from Paul Bolle to remove ARCH_POPULATES_NODE_MAP again (touches microblaze too). - Add TLS pointer regset to metag ptrace api. - Add exported metag DSP extended context handling header <asm/ech.h>. - Increase defconfig log buffer size to 128KiB. - Various fixes, typos, missing exports. * tag 'metag-for-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: metag: defconfigs: increase log buffer 8KiB => 128KiB metag: avoid unnecessary builtin dtb rebuilds metag: add exported <asm/ech.h> for extended context handling metag: export _metag_da_present and cpu_2_hwthread_id metag: ptrace: Implement NT_METAG_TLS memblock: Kill ARCH_POPULATES_NODE_MAP once more metag: cachepart: fix get_global_dcache_size() typo metag: cachepart: take into account small cache bits metag: smp: copy cache partition and enable GCOn metag: OProfile support metag: perf: prepare for use by oprofile metag: perf: don't reset TXTACTCYC metag: perf: use hard_processor_id() to get thread metag: perf: fix frequency sampling (dynamic period) metag: perf: add missing prev_count updates metag: perf: fixes for interrupting perf counters metag: perf: fix wrap handling in delta calculation metag: perf: fix core internal / perf channel mux
2013-04-17idle: Remove GENERIC_IDLE_LOOP config switchThomas Gleixner
All archs are converted over. Remove the config switch and the fallback code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-16Remove GENERIC_GPIO config optionAlexandre Courbot
GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code and all driver code has been switch to depend on GPIOLIB. It is thus safe to have GENERIC_GPIO removed. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-08microblaze: Use generic idle loopThomas Gleixner
The microblaze idle loop provides a polling and a non polling version, which are suprisingly both polling, just with slightly different instrumentation. Remove them and use the generic poller. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Link: http://lkml.kernel.org/r/20130321215234.687590459@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-20memblock: Kill ARCH_POPULATES_NODE_MAP once morePaul Bolle
The Kconfig symbol ARCH_POPULATES_NODE_MAP was killed in v3.3. After that it popped up again in microblaze and metag. Nobody noticed, probably because these Kconfig symbols are entirely unused and these architectures both select HAVE_MEMBLOCK_NODE_MAP. Anyhow, these two entries can also be killed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: James Hogan <james.hogan@imgtec.com>
2013-03-12Select VIRT_TO_BUS directly where neededStephen Rothwell
In commit 887cbce0adea ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS") I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where needed. I am not sure what I was thinking. Instead, just directly select VIRT_TO_BUS where it is needed. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUSStephen Rothwell
Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures that already provide virt_to_bus(). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-19Bury the conditionals from kernel_thread/kernel_execve seriesAl Viro
All architectures have CONFIG_GENERIC_KERNEL_THREAD CONFIG_GENERIC_KERNEL_EXECVE __ARCH_WANT_SYS_EXECVE None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers of kernel_execve() (which is a trivial wrapper for do_execve() now) left. Kill the conditionals and make both callers use do_execve(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-11-28microblaze: switch to generic fork/vfork/cloneAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16microblaze: switch to generic kernel_execve()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-11-16microblaze: switch to generic kernel_thread()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2012-10-14Merge branch 'modules-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module signing support from Rusty Russell: "module signing is the highlight, but it's an all-over David Howells frenzy..." Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG. * 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits) X.509: Fix indefinite length element skip error handling X.509: Convert some printk calls to pr_devel asymmetric keys: fix printk format warning MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking MODSIGN: Make mrproper should remove generated files. MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs MODSIGN: Use the same digest for the autogen key sig as for the module sig MODSIGN: Sign modules during the build process MODSIGN: Provide a script for generating a key ID from an X.509 cert MODSIGN: Implement module signature checking MODSIGN: Provide module signing public keys to the kernel MODSIGN: Automatically generate module signing keys if missing MODSIGN: Provide Kconfig options MODSIGN: Provide gitignore and make clean rules for extra files MODSIGN: Add FIPS policy module: signature checking hook X.509: Add a crypto key parser for binary (DER) X.509 certificates MPILIB: Provide a function to read raw data into an MPI X.509: Add an ASN.1 decoder X.509: Add simple ASN.1 grammar compiler ...
2012-10-09Kconfig: clean up the long arch list for the DEBUG_KMEMLEAK config optionCatalin Marinas
Introduce HAVE_DEBUG_KMEMLEAK config option and select it in corresponding architecture Kconfig files. DEBUG_KMEMLEAK now only depends on HAVE_DEBUG_KMEMLEAK. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-04microblaze: Support 4k/16k/64k pagesMichal Simek
Add support for page size which is supported by MMU. Remove 8k and 32k page size because they are not supported by MMU. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-09-28Make most arch asm/module.h files use asm-generic/module.hDavid Howells
Use the mapping of Elf_[SPE]hdr, Elf_Addr, Elf_Sym, Elf_Dyn, Elf_Rel/Rela, ELF_R_TYPE() and ELF_R_SYM() to either the 32-bit version or the 64-bit version into asm-generic/module.h for all arches bar MIPS. Also, use the generic definition mod_arch_specific where possible. To this end, I've defined three new config bools: (*) HAVE_MOD_ARCH_SPECIFIC Arches define this if they don't want to use the empty generic mod_arch_specific struct. (*) MODULES_USE_ELF_RELA Arches define this if their modules can contain RELA records. This causes the Elf_Rela mapping to be emitted and allows apply_relocate_add() to be defined by the arch rather than have the core emit an error message. (*) MODULES_USE_ELF_REL Arches define this if their modules can contain REL records. This causes the Elf_Rel mapping to be emitted and allows apply_relocate() to be defined by the arch rather than have the core emit an error message. Note that it is possible to allow both REL and RELA records: m68k and mips are two arches that do this. With this, some arch asm/module.h files can be deleted entirely and replaced with a generic-y marker in the arch Kbuild file. Additionally, I have removed the bits from m32r and score that handle the unsupported type of relocation record as that's now handled centrally. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-07-30ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSIONWill Deacon
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-28Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull microblaze changes from Michal Simek. * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Setup correct pointer to TLS area microblaze: Add TLS support to sys_clone microblaze: ftrace: Pass the first calling instruction for dynamic ftrace microblaze: Port OOM changes to do_page_fault microblaze: Do not select GENERIC_GPIO by default
2012-05-25microblaze: Do not select GENERIC_GPIO by defaultLars-Peter Clausen
The microblaze architecture does not provide a native GPIO API implementation nor requires GPIOLIB, but still selects GENERIC_GPIO by default. As a result the following build error occurs, if GPIOLIB is not selected: include/asm-generic/gpio.h: In function 'gpio_get_value_cansleep': include/asm-generic/gpio.h:218: error: implicit declaration of function '__gpio_get_value' include/asm-generic/gpio.h: In function 'gpio_set_value_cansleep': include/asm-generic/gpio.h:224: error: implicit declaration of function '__gpio_set_value' This patch addresses the issue by not selecting GENERIC_GPIO by default. This causes the GPIO API to be stubbed out if no implementation is provided. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org Tested-by: Michal Simek <monstr@monstr.eu>
2012-05-21timers: Fixup the Kconfig consolidation falloutThomas Gleixner
Sigh, I missed to check which architecture Kconfig files actually include the core Kconfig file. There are a few which did not. So we broke them. Instead of adding the includes to those, we are better off to move the include to init/Kconfig like we did already with irqs and others. This does not change anything for the architectures using the old style periodic timer mode. It just solves the build wreckage there. For those architectures which use the clock events infrastructure it moves the include of the core Kconfig file to "General setup" which is a way more logical place than having it at random locations specified by the architecture specific Kconfigs. Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Anna-Maria Gleixner <anna-maria@glx-um.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-21microblaze: Use generic time configAnna-Maria Gleixner
Signed-off-by: Anna-Maria Gleixner <anna-maria@glx-um.de> Cc: Michal Simek <monstr@monstr.eu> Link: http://lkml.kernel.org/r/20120518163105.939597527@glx-um.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-03-27Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
Pull arch/microblaze fixes from Michal Simek * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Handle TLB skip size dynamically microblaze: Introduce TLB skip size microblaze: Improve TLB calculation for small systems microblaze: Extend space for compiled-in FDT to 32kB microblaze: Clear all MSR flags on the first kernel instruction microblaze: Use node name instead of compatible string microblaze: Fix mapin_ram function microblaze: Highmem support microblaze: Use active regions microblaze: Show more detailed information about memory microblaze: Introduce fixmap microblaze: mm: Fix lowmem max memory size limits microblaze: mm: Use ZONE_DMA instead of ZONE_NORMAL microblaze: trivial: Fix typo fault in timer.c microblaze: Use vsprintf extention %pf with builtin_return_address microblaze: Add PVR version string for MB 8.20.b and 8.30.a microblaze: Fix makefile to work with latest toolchain microblaze: Fix typo in early_printk.c
2012-03-23microblaze: Improve TLB calculation for small systemsMichal Simek
Systems with small amount of memory need to be handled differently. Linux can't allocate the whole 32MB with two TLBs because then there is no MMU protection. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-03-23microblaze: Highmem supportMichal Simek
The first highmem implementation. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-03-23microblaze: Use active regionsMichal Simek
Register lowmem active regions. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-03-23microblaze: mm: Use ZONE_DMA instead of ZONE_NORMALMichal Simek
We should use ZONE_DMA because all address space is dma-able. Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-02-16irq_domain/microblaze: Convert microblaze to use irq_domainsGrant Likely
This patch converts Microblaze to use the irq_domain remapper and get away from hard coding the offset between hwirq number and the linux irq number space. This also paves the way for multiple interrupt controllers. v2: Don't enable SPARSE_IRQ and keep NR_IRQS set to 33 Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Michal Simek <monstr@monstr.eu> Cc: Rob Herring <rob.herring@calxeda.com> Cc: John Williams <john.williams@petalogix.com> Cc: John Linn <john.linn@xilinx.com>
2012-01-20microblaze: generic atomic64 supportDaniel Borkmann
This tiny patch adds generic atomic64 support for the Microblaze architecture. The patch is against the latest linux-2.6-microblaze tree. It also fixes the kernel build for microblaze: Error log: CC kernel/trace/trace_clock.o kernel/trace/trace_clock.c:117: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'trace_counter' kernel/trace/trace_clock.c: In function 'trace_clock_counter': kernel/trace/trace_clock.c:126: error: implicit declaration of function 'atomic64_add_return' kernel/trace/trace_clock.c:126: error: 'trace_counter' undeclared (first use in this function) kernel/trace/trace_clock.c:126: error: (Each undeclared identifier is reported only once kernel/trace/trace_clock.c:126: error: for each function it appears in.) make[2]: *** [kernel/trace/trace_clock.o] Error 1 make[1]: *** [kernel/trace] Error 2 make: *** [kernel] Error 2 Signed-off-by: Ariane Keller <ariane.keller@tik.ee.ethz.ch> Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by: Michal Simek <monstr@monstr.eu>
2012-01-11cpu: Register a generic CPU device on architectures that currently do notBen Hutchings
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently do not register a CPU device. Add the config option GENERIC_CPU_DEVICES which causes a generic CPU device to be registered for each present CPU, and make all these architectures select it. Richard Weinberger <richard@nod.at> covered UML and suggested using per_cpu. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-28microblaze: switch to GENERIC_PCI_IOMAPMichael S. Tsirkin
microblaze copied pci_iomap from generic code, probably to avoid pulling the rest of iomap.c in. Since that's in a separate file now, we can reuse the common implementation. The only difference is handling of nocache flag, that turns out to be done correctly by the generic code since arch/microblaze/include/asm/io.h defines ioremap_nocache same as ioremap. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-26arch: remove CONFIG_GENERIC_FIND_{NEXT_BIT,BIT_LE,LAST_BIT}Akinobu Mita
By the previous style change, CONFIG_GENERIC_FIND_NEXT_BIT, CONFIG_GENERIC_FIND_BIT_LE, and CONFIG_GENERIC_FIND_LAST_BIT are not used to test for existence of find bitops anymore. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-13usb: Fix Kconfig unmet dependencies for Microblaze EHCIMichal Simek
Disable USB_ARCH_HAS_EHCI in arch Kconfig and enable it in usb Kconfig Warning log: warning: (MICROBLAZE) selects USB_ARCH_HAS_EHCI which has unmet direct dependencies (USB_SUPPORT) Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 19:50:28 +0000