summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)Author
2011-12-24m68knommu: remove unused anchor.h include fileGreg Ungerer
The code that used the anchor.h include file has long been removed from the kernel. Remove it too. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68knommu: fix broken ColdFire slice timer read_clk() codeGreg Ungerer
There is a race on reading the ColdFire slice timer current count and the total clock count so far. Interrupts are off, and we may have just missed getting a new timer wrap event interrupt. Check for this and adjust the cycle count and current read count accordingly. Also the slice timer counts down from the terminal count. So in read_clk() we need take the current clock count away from the terminal count. Reported-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68knommu: disable cache early in startup for ColdFireGreg Ungerer
Disbale the CPU cache really early in the ColdFire startup code. We set up some variables for RAM sizing and we want to make they stick in RAM. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: handle presence of 64bit mul/div instructions cleanlyGreg Ungerer
The traditional 68000 processors and the newer reduced instruction set ColdFire processors do not support the 32*32->64 multiply or the 64/32->32 divide instructions. This is not a difference based on the presence of a hardware MMU or not. Create a new config symbol to mark that a CPU type doesn't support the longer multiply/divide instructions. Use this then as a basis for using the fast 64bit based divide (in div64.h) and for linking in the extra libgcc functions that may be required (mulsi3, divsi3, etc). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68k: simpler m68k and ColdFire CPU's can use generic csum codeGreg Ungerer
We have two implementations of the IP checksuming code for the m68k arch. One uses the more advanced instructions available in 68020 and above processors, the other uses the simpler instructions available on the original 68000 processors and the modern ColdFire processors. This simpler code is pretty much the same as the generic lib implementation of the IP csum functions. So lets just switch over to using that. That means we can completely remove the checksum_no.c file, and only have the local fast code used for the more complex 68k CPU family members. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: make fp register stores consistent for m68k and ColdFireGreg Ungerer
There is no reason we can't make the saved fp registers the same for all m68k types and ColdFire. There is a little wasted space, but the code consistency and cleanliness is a big win. sigcontext.h is an exported header, but currently there is no in-mainline users of the !__uClinux__ and __mcoldfire__ case that this change effects. Even better this change actually makes this structure consistent with the out-of-mainline ColdFire/MMU code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68knommu: no need to set register marker on trapsGreg Ungerer
Commit 61619b12078dc8b85a3d4cbfa16f650daa341bd1 ("m68k: merge mmu and non-mmu include/asm/entry.h files") made the trap entry code basically the same for mmu and non-mmu builds. This means we no longer need code to mark the stack frame as "system-call" type or other in the non-mmu trap handling entry points. This is done in the SAVE_ALL_INT macro now. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: support configure time command line for MMU m68kGreg Ungerer
The non-MMU builds of m68k allow a fixed kernel boot command line to be configured at configure time. Allow this MMU builds as well. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: print memory layout info in boot logGreg Ungerer
Output a table of the kernel memory regions at boot time. This is taken directly from the ARM architecture code that does this. The table looks like this: Virtual kernel memory layout: vector : 0x00000000 - 0x00000400 ( 0 KiB) kmap : 0xd0000000 - 0xe0000000 ( 256 MiB) vmalloc : 0xc0000000 - 0xcfffffff ( 255 MiB) lowmem : 0x00000000 - 0x02000000 ( 32 MiB) .init : 0x00128000 - 0x00134000 ( 48 KiB) .text : 0x00020000 - 0x00118d54 ( 996 KiB) .data : 0x00118d60 - 0x00126000 ( 53 KiB) .bss : 0x00134000 - 0x001413e0 ( 53 KiB) This has been very useful while debugging the ColdFire virtual memory support code. But in general I think it is nice to know extacly where the kernel has layed everything out on boot. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68knommu: move definition of mach_gettod to where it is usedGreg Ungerer
The mach_gettod function pointer is only called from the time_no.c code. So move its actual definition to there too. It is currently in setup_no.c for no particularly good reason. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: selection of GENERIC_ATOMIC64 is not MMU specificGreg Ungerer
The selection of the CONFIG_GENERIC_ATOMIC64 option is not specific to the MMU being present and enabled. It is a property of certain CPU families. So select it based on those CPU types being selected. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: remove thread_info struct from thread structGreg Ungerer
Currently on m68k we have a comeplete thread_info structure stored inside of the thread_struct, and we also have it in the initial part of the kernel stack. Mostly the code currently uses the one inside of the thread_struct, only using the "task" pointer from the stack based one. This is wasteful and confusing, we should only have the single instance of thread_info inside the stack page. And this is the norm for all other architectures. This change makes m68k handle thread_info consistently on both MMU enabled and non-MMU setups. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: remove duplicate asm offset for task thread.infoGreg Ungerer
We have a duplicate name and definition for the offset of the thread.info struct within the task struct in our asm-offsets.c code. Remove one of them, and consolidate to use a single define, TASK_INFO. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68k: merge the init_task code for mmu and non-mmu targetsGreg Ungerer
The init_task code can be the same for both mmu and non-mmu targets. None of the alignment carried out in the the current init_task code is necessary. The linker script takes care of aligning the init_thread structure to a THREAD SIZE boundary, and that is all we need. So use the init_task.c code for all target types, that makes m68k code consistent with what most other architectures do. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-24m68knommu: remove unused fasthandler declarationGreg Ungerer
The fasthandler code was removed long ago. Remove the now unused declaration of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24m68k: Fall back to __gpio_to_irq() for non-arch GPIOsMark Brown
gpiolib provides __gpio_to_irq() to map gpiolib gpios to interrupts - hook that up on m68k. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-24clocksource: m86k: Convert to clocksource_register_hz/khzjohn stultz
Updated to merge the valid bits of the two m68k patches. This converts the m86k clocksources to use clocksource_register_hz/khz This is untested, so any assistance in testing would be appreciated! CC: Geert Uytterhoeven <geert@linux-m68k.org> CC: Greg Ungerer <gerg@uclinux.org> Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-12-06m68k: Wire up process_vm_{read,write}vGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-11-08m68k/mac: Remove mac_irq_{en,dis}able() wrappersFinn Thain
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete support for user vector interrupt fixupsGeert Uytterhoeven
It was used on Apollo only, before its conversion to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete m68k irq frameworkGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/q40: Convert Q40/Q60 to genirqGeert Uytterhoeven
q40_irq_handler() must be kept to translate ISA IRQs to the range 1-15. q40_probe_irq_o{ff,n}() become unused. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Zidlicky <rz@linux-m68k.org>
2011-11-08m68k/sun3: Convert Sun3/3x to genirqGeert Uytterhoeven
Replace the custom irq handler that masks the irq and calls do_IRQ(), and the unmasking in the individual handlers, by handle_level_irq(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sam Creasey <sammy@sammy.net>
2011-11-08m68k/sun3: Use the kstat_irqs_cpu() wrapperGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sam Creasey <sammy@sammy.net>
2011-11-08m68k/apollo: Convert Apollo to genirqGeert Uytterhoeven
Replace the custom user vector interrupt handler that calls do_IRQ() and does an EOI by handle_fasteoi_irq(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter De Schrijver <p2@debian.org>
2011-11-08m68k/vme: Convert VME to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Hirst <rhirst@parisc-linux.org>
2011-11-08m68k/hp300: Convert HP9000/300 and HP9000/400 to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Philip Blundell <philb@gnu.org>
2011-11-08m68k/mac: Optimize interrupts using chain handlersGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Convert Mac to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/amiga: Optimize interrupts using chain handlersGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/amiga: Convert Amiga to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/amiga: Refactor amiints.cGeert Uytterhoeven
- Remove filename in comments, - Reorder functions so we no longer need forward declarations. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/atari: Remove code and comments about different irq typesGeert Uytterhoeven
This code was obsoleted during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/atari: Convert Atari to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [v1] Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Add genirq supportGeert Uytterhoeven
Disabled on all platforms for now Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> [v1] Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Remove obsolete IRQ_FLG_* usersGeert Uytterhoeven
The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Rename {,__}m68k_handle_int()Geert Uytterhoeven
- Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Add m68k_setup_irq_controller()Geert Uytterhoeven
This is a wrapper around m68k_setup_irq_chip() that discards its dummy second parameter, to ease the future transition to genirq. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Extract irq_set_chip()Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename setup_irq() to m68k_setup_irq() and make it staticGeert Uytterhoeven
It has nothing to do with the standard one in <linux/irq.h> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Switch irq_chip methods to "struct irq_data *data"Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename irq_node to irq_dataGeert Uytterhoeven
Make it more similar to the genirq version: - Add an irq field Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Kill irq_node_t typedef, always use struct irq_nodeGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k/irq: Rename irq_controller to irq_chipGeert Uytterhoeven
Make it more similar to the genirq version: - Remove lock (unused as we don't do SMP anyway), - Prepend methods with irq_, - Make irq_startup() return unsigned int. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2011-11-08m68k: Revive lost DIO bus config optionGeert Uytterhoeven
commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the DIO bus config option. Re-add it to the "Bus support" section. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k: Revive lost ARAnyM config optionsGeert Uytterhoeven
commit 0e152d80507b75c00aac60f2ffc586360687cd52 ("m68k: reorganize Kconfig options to improve mmu/non-mmu selections") accidentally dropped the ARAnyM config options. Re-add them to the "Platform devices" section. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04Merge branch 'for-3.2/core' of git://git.kernel.dk/linux-blockLinus Torvalds
* 'for-3.2/core' of git://git.kernel.dk/linux-block: (29 commits) block: don't call blk_drain_queue() if elevator is not up blk-throttle: use queue_is_locked() instead of lockdep_is_held() blk-throttle: Take blkcg->lock while traversing blkcg->policy_list blk-throttle: Free up policy node associated with deleted rule block: warn if tag is greater than real_max_depth. block: make gendisk hold a reference to its queue blk-flush: move the queue kick into blk-flush: fix invalid BUG_ON in blk_insert_flush block: Remove the control of complete cpu from bio. block: fix a typo in the blk-cgroup.h file block: initialize the bounce pool if high memory may be added later block: fix request_queue lifetime handling by making blk_queue_cleanup() properly shutdown block: drop @tsk from attempt_plug_merge() and explain sync rules block: make get_request[_wait]() fail if queue is dead block: reorganize throtl_get_tg() and blk_throtl_bio() block: reorganize queue draining block: drop unnecessary blk_get/put_queue() in scsi_cmd_ioctl() and blk_get_tg() block: pass around REQ_* flags instead of broken down booleans during request alloc/free block: move blk_throtl prototypes to block/blk.h block: fix genhd refcounting in blkio_policy_parse_and_set() ... Fix up trivial conflicts due to "mddev_t" -> "struct mddev" conversion and making the request functions be of type "void" instead of "int" in - drivers/md/{faulty.c,linear.c,md.c,md.h,multipath.c,raid0.c,raid1.c,raid10.c,raid5.c} - drivers/staging/zram/zram_drv.c
2011-10-31m68k: Add export.h to the m68k specific files as requiredPaul Gortmaker
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-25Merge branch 'for-linus' of git://github.com/gregungerer/m68knommuLinus Torvalds
* 'for-linus' of git://github.com/gregungerer/m68knommu: m68k: drop unused Kconfig symbols m68k: drop unused Kconfig symbols m68knommu: create common externs for _ram* vars m68knommu: remove extern declarations of memory_start/memory_end from mm/init m68knommu: use generic section names in mm/init code m68knommu: use generic section names in setup code m68k: merge the mmu and non-mmu traps.c files m68k: move hardware vector setting from traps.c to its own file m68k: merge mmu and non-mmu include/asm/entry.h files m68k: merge the mmu and non-mmu kernel/Makefiles m68k: merge mmu and non-mmu arch Makefiles m68k: reorganize Kconfig options to improve mmu/non-mmu selections m68knommu: fix problems with SPI/GPIO on ColdFire 520x m68k: fix memcpy to unmatched/unaligned source and dest on 68000
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 21:50:45 +0000