summaryrefslogtreecommitdiff
path: root/arch/m68k
AgeCommit message (Collapse)Author
2019-07-15arch: mark syscall number 435 reserved for clone3Christian Brauner
A while ago Arnd made it possible to give new system calls the same syscall number on all architectures (except alpha). To not break this nice new feature let's mark 435 for clone3 as reserved on all architectures that do not yet implement it. Even if an architecture does not plan to implement it this ensures that new system calls coming after clone3 will have the same number on all architectures. Signed-off-by: Christian Brauner <christian@brauner.io> Cc: linux-arch@vger.kernel.org Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Link: https://lore.kernel.org/r/20190714192205.27190-2-christian@brauner.io Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge updates from Andrew Morton: "Am experimenting with splitting MM up into identifiable subsystems perhaps with a view to gitifying it in complex ways. Also with more verbose "incoming" emails. Most of MM is here and a few other trees. Subsystems affected by this patch series: - hotfixes - iommu - scripts - arch/sh - ocfs2 - mm:slab-generic - mm:slub - mm:kmemleak - mm:kasan - mm:cleanups - mm:debug - mm:pagecache - mm:swap - mm:memcg - mm:gup - mm:pagemap - mm:infrastructure - mm:vmalloc - mm:initialization - mm:pagealloc - mm:vmscan - mm:tools - mm:proc - mm:ras - mm:oom-kill hotfixes: mm: vmscan: scan anonymous pages on file refaults mm/nvdimm: add is_ioremap_addr and use that to check ioremap address mm/memcontrol: fix wrong statistics in memory.stat mm/z3fold.c: lock z3fold page before __SetPageMovable() nilfs2: do not use unexported cpu_to_le32()/le32_to_cpu() in uapi header MAINTAINERS: nilfs2: update email address iommu: include/linux/dmar.h: replace single-char identifiers in macros scripts: scripts/decode_stacktrace: match basepath using shell prefix operator, not regex scripts/decode_stacktrace: look for modules with .ko.debug extension scripts/spelling.txt: drop "sepc" from the misspelling list scripts/spelling.txt: add spelling fix for prohibited scripts/decode_stacktrace: Accept dash/underscore in modules scripts/spelling.txt: add more spellings to spelling.txt arch/sh: arch/sh/configs/sdk7786_defconfig: remove CONFIG_LOGFS sh: config: remove left-over BACKLIGHT_LCD_SUPPORT sh: prevent warnings when using iounmap ocfs2: fs: ocfs: fix spelling mistake "hearbeating" -> "heartbeat" ocfs2/dlm: use struct_size() helper ocfs2: add last unlock times in locking_state ocfs2: add locking filter debugfs file ocfs2: add first lock wait time in locking_state ocfs: no need to check return value of debugfs_create functions fs/ocfs2/dlmglue.c: unneeded variable: "status" ocfs2: use kmemdup rather than duplicating its implementation mm:slab-generic: Patch series "mm/slab: Improved sanity checking": mm/slab: validate cache membership under freelist hardening mm/slab: sanity-check page type when looking up cache lkdtm/heap: add tests for freelist hardening mm:slub: mm/slub.c: avoid double string traverse in kmem_cache_flags() slub: don't panic for memcg kmem cache creation failure mm:kmemleak: mm/kmemleak.c: fix check for softirq context mm/kmemleak.c: change error at _write when kmemleak is disabled docs: kmemleak: add more documentation details mm:kasan: mm/kasan: print frame description for stack bugs Patch series "Bitops instrumentation for KASAN", v5: lib/test_kasan: add bitops tests x86: use static_cpu_has in uaccess region to avoid instrumentation asm-generic, x86: add bitops instrumentation for KASAN Patch series "mm/kasan: Add object validation in ksize()", v3: mm/kasan: introduce __kasan_check_{read,write} mm/kasan: change kasan_check_{read,write} to return boolean lib/test_kasan: Add test for double-kzfree detection mm/slab: refactor common ksize KASAN logic into slab_common.c mm/kasan: add object validation in ksize() mm:cleanups: include/linux/pfn_t.h: remove pfn_t_to_virt() Patch series "remove ARCH_SELECT_MEMORY_MODEL where it has no effect": arm: remove ARCH_SELECT_MEMORY_MODEL s390: remove ARCH_SELECT_MEMORY_MODEL sparc: remove ARCH_SELECT_MEMORY_MODEL mm/gup.c: make follow_page_mask() static mm/memory.c: trivial clean up in insert_page() mm: make !CONFIG_HUGE_PAGE wrappers into static inlines include/linux/mm_types.h: ifdef struct vm_area_struct::swap_readahead_info mm: remove the account_page_dirtied export mm/page_isolation.c: change the prototype of undo_isolate_page_range() include/linux/vmpressure.h: use spinlock_t instead of struct spinlock mm: remove the exporting of totalram_pages include/linux/pagemap.h: document trylock_page() return value mm:debug: mm/failslab.c: by default, do not fail allocations with direct reclaim only Patch series "debug_pagealloc improvements": mm, debug_pagelloc: use static keys to enable debugging mm, page_alloc: more extensive free page checking with debug_pagealloc mm, debug_pagealloc: use a page type instead of page_ext flag mm:pagecache: Patch series "fix filler_t callback type mismatches", v2: mm/filemap.c: fix an overly long line in read_cache_page mm/filemap: don't cast ->readpage to filler_t for do_read_cache_page jffs2: pass the correct prototype to read_cache_page 9p: pass the correct prototype to read_cache_page mm/filemap.c: correct the comment about VM_FAULT_RETRY mm:swap: mm, swap: fix race between swapoff and some swap operations mm/swap_state.c: simplify total_swapcache_pages() with get_swap_device() mm, swap: use rbtree for swap_extent mm/mincore.c: fix race between swapoff and mincore mm:memcg: memcg, oom: no oom-kill for __GFP_RETRY_MAYFAIL memcg, fsnotify: no oom-kill for remote memcg charging mm, memcg: introduce memory.events.local mm: memcontrol: dump memory.stat during cgroup OOM Patch series "mm: reparent slab memory on cgroup removal", v7: mm: memcg/slab: postpone kmem_cache memcg pointer initialization to memcg_link_cache() mm: memcg/slab: rename slab delayed deactivation functions and fields mm: memcg/slab: generalize postponed non-root kmem_cache deactivation mm: memcg/slab: introduce __memcg_kmem_uncharge_memcg() mm: memcg/slab: unify SLAB and SLUB page accounting mm: memcg/slab: don't check the dying flag on kmem_cache creation mm: memcg/slab: synchronize access to kmem_cache dying flag using a spinlock mm: memcg/slab: rework non-root kmem_cache lifecycle management mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages mm: memcg/slab: reparent memcg kmem_caches on cgroup removal mm, memcg: add a memcg_slabinfo debugfs file mm:gup: Patch series "switch the remaining architectures to use generic GUP", v4: mm: use untagged_addr() for get_user_pages_fast addresses mm: simplify gup_fast_permitted mm: lift the x86_32 PAE version of gup_get_pte to common code MIPS: use the generic get_user_pages_fast code sh: add the missing pud_page definition sh: use the generic get_user_pages_fast code sparc64: add the missing pgd_page definition sparc64: define untagged_addr() sparc64: use the generic get_user_pages_fast code mm: rename CONFIG_HAVE_GENERIC_GUP to CONFIG_HAVE_FAST_GUP mm: reorder code blocks in gup.c mm: consolidate the get_user_pages* implementations mm: validate get_user_pages_fast flags mm: move the powerpc hugepd code to mm/gup.c mm: switch gup_hugepte to use try_get_compound_head mm: mark the page referenced in gup_hugepte mm/gup: speed up check_and_migrate_cma_pages() on huge page mm/gup.c: remove some BUG_ONs from get_gate_page() mm/gup.c: mark undo_dev_pagemap as __maybe_unused mm:pagemap: asm-generic, x86: introduce generic pte_{alloc,free}_one[_kernel] alpha: switch to generic version of pte allocation arm: switch to generic version of pte allocation arm64: switch to generic version of pte allocation csky: switch to generic version of pte allocation m68k: sun3: switch to generic version of pte allocation mips: switch to generic version of pte allocation nds32: switch to generic version of pte allocation nios2: switch to generic version of pte allocation parisc: switch to generic version of pte allocation riscv: switch to generic version of pte allocation um: switch to generic version of pte allocation unicore32: switch to generic version of pte allocation mm/pgtable: drop pgtable_t variable from pte_fn_t functions mm/memory.c: fail when offset == num in first check of __vm_map_pages() mm:infrastructure: mm/mmu_notifier: use hlist_add_head_rcu() mm:vmalloc: Patch series "Some cleanups for the KVA/vmalloc", v5: mm/vmalloc.c: remove "node" argument mm/vmalloc.c: preload a CPU with one object for split purpose mm/vmalloc.c: get rid of one single unlink_va() when merge mm/vmalloc.c: switch to WARN_ON() and move it under unlink_va() mm/vmalloc.c: spelling> s/informaion/information/ mm:initialization: mm/large system hash: use vmalloc for size > MAX_ORDER when !hashdist mm/large system hash: clear hashdist when only one node with memory is booted mm:pagealloc: arm64: move jump_label_init() before parse_early_param() Patch series "add init_on_alloc/init_on_free boot options", v10: mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options mm: init: report memory auto-initialization features at boot time mm:vmscan: mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned mm: vmscan: correct some vmscan counters for THP swapout mm:tools: tools/vm/slabinfo: order command line options tools/vm/slabinfo: add partial slab listing to -X tools/vm/slabinfo: add option to sort by partial slabs tools/vm/slabinfo: add sorting info to help menu mm:proc: proc: use down_read_killable mmap_sem for /proc/pid/maps proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup proc: use down_read_killable mmap_sem for /proc/pid/pagemap proc: use down_read_killable mmap_sem for /proc/pid/clear_refs proc: use down_read_killable mmap_sem for /proc/pid/map_files mm: use down_read_killable for locking mmap_sem in access_remote_vm mm: smaps: split PSS into components mm: vmalloc: show number of vmalloc pages in /proc/meminfo mm:ras: mm/memory-failure.c: clarify error message mm:oom-kill: mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks() mm, oom: refactor dump_tasks for memcg OOMs mm, oom: remove redundant task_in_mem_cgroup() check oom: decouple mems_allowed from oom_unkillable_task mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process()" * akpm: (147 commits) mm/oom_kill.c: remove redundant OOM score normalization in select_bad_process() oom: decouple mems_allowed from oom_unkillable_task mm, oom: remove redundant task_in_mem_cgroup() check mm, oom: refactor dump_tasks for memcg OOMs mm: memcontrol: use CSS_TASK_ITER_PROCS at mem_cgroup_scan_tasks() mm/memory-failure.c: clarify error message mm: vmalloc: show number of vmalloc pages in /proc/meminfo mm: smaps: split PSS into components mm: use down_read_killable for locking mmap_sem in access_remote_vm proc: use down_read_killable mmap_sem for /proc/pid/map_files proc: use down_read_killable mmap_sem for /proc/pid/clear_refs proc: use down_read_killable mmap_sem for /proc/pid/pagemap proc: use down_read_killable mmap_sem for /proc/pid/smaps_rollup proc: use down_read_killable mmap_sem for /proc/pid/maps tools/vm/slabinfo: add sorting info to help menu tools/vm/slabinfo: add option to sort by partial slabs tools/vm/slabinfo: add partial slab listing to -X tools/vm/slabinfo: order command line options mm: vmscan: correct some vmscan counters for THP swapout mm: vmscan: remove double slab pressure by inc'ing sc->nr_scanned ...
2019-07-12m68k: sun3: switch to generic version of pte allocationMike Rapoport
The sun3 MMU variant of m68k uses GFP_KERNEL to allocate a PTE page and then memset(0) or clear_highpage() to clear it. This is equivalent to allocating the page with GFP_KERNEL | __GFP_ZERO, which allows replacing sun3 implementation of pte_alloc_one() and pte_alloc_one_kernel() with the generic ones. The pte_free() and pte_free_kernel() versions are identical to the generic ones and can be simply dropped. Link: http://lkml.kernel.org/r/1557296232-15361-8-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Guo Ren <ren_guo@c-sky.com> Cc: Helge Deller <deller@gmx.de> Cc: Ley Foon Tan <lftan@altera.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Sam Creasey <sammy@sammy.net> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
2019-07-10Merge tag 'pidfd-updates-v5.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux Pull pidfd updates from Christian Brauner: "This adds two main features. - First, it adds polling support for pidfds. This allows process managers to know when a (non-parent) process dies in a race-free way. The notification mechanism used follows the same logic that is currently used when the parent of a task is notified of a child's death. With this patchset it is possible to put pidfds in an {e}poll loop and get reliable notifications for process (i.e. thread-group) exit. - The second feature compliments the first one by making it possible to retrieve pollable pidfds for processes that were not created using CLONE_PIDFD. A lot of processes get created with traditional PID-based calls such as fork() or clone() (without CLONE_PIDFD). For these processes a caller can currently not create a pollable pidfd. This is a problem for Android's low memory killer (LMK) and service managers such as systemd. Both patchsets are accompanied by selftests. It's perhaps worth noting that the work done so far and the work done in this branch for pidfd_open() and polling support do already see some adoption: - Android is in the process of backporting this work to all their LTS kernels [1] - Service managers make use of pidfd_send_signal but will need to wait until we enable waiting on pidfds for full adoption. - And projects I maintain make use of both pidfd_send_signal and CLONE_PIDFD [2] and will use polling support and pidfd_open() too" [1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22 https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22 [2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753 * tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: tests: add pidfd_open() tests arch: wire-up pidfd_open() pid: add pidfd_open() pidfd: add polling selftests pidfd: add polling support
2019-07-10Merge tag 'm68k-for-v5.3-tag2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire. This is a fix for an issue detected in next, to avoid introducing build failures when merging Christoph's dma-mapping tree later" * tag 'm68k-for-v5.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfire
2019-07-10Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu Pull m68nommu updates from Greg Ungerer: "A series of cleanups for the FLAT format binary loader, binfmt_flat, from Christoph. The end goal is to support no-MMU on RISC-V, and the last patch enables that" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: riscv: add binfmt_flat support binfmt_flat: don't offset the data start binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.c binfmt_flat: remove the persistent argument from flat_get_addr_from_rp binfmt_flat: provide an asm-generic/flat.h binfmt_flat: make support for old format binaries optional binfmt_flat: add a ARCH_HAS_BINFMT_FLAT option binfmt_flat: add endianess annotations binfmt_flat: use fixed size type for the on-disk format binfmt_flat: consolidate two version of flat_v2_reloc_t binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definition binfmt_flat: remove the uapi <linux/flat.h> header binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variable binfmt_flat: remove flat_old_ram_flag binfmt_flat: provide a default version of flat_get_relocate_addr binfmt_flat: remove flat_set_persistent binfmt_flat: remove flat_reloc_valid
2019-07-09Merge tag 'docs-5.3' of git://git.lwn.net/linuxLinus Torvalds
Pull Documentation updates from Jonathan Corbet: "It's been a relatively busy cycle for docs: - A fair pile of RST conversions, many from Mauro. These create more than the usual number of simple but annoying merge conflicts with other trees, unfortunately. He has a lot more of these waiting on the wings that, I think, will go to you directly later on. - A new document on how to use merges and rebases in kernel repos, and one on Spectre vulnerabilities. - Various improvements to the build system, including automatic markup of function() references because some people, for reasons I will never understand, were of the opinion that :c:func:``function()`` is unattractive and not fun to type. - We now recommend using sphinx 1.7, but still support back to 1.4. - Lots of smaller improvements, warning fixes, typo fixes, etc" * tag 'docs-5.3' of git://git.lwn.net/linux: (129 commits) docs: automarkup.py: ignore exceptions when seeking for xrefs docs: Move binderfs to admin-guide Disable Sphinx SmartyPants in HTML output doc: RCU callback locks need only _bh, not necessarily _irq docs: format kernel-parameters -- as code Doc : doc-guide : Fix a typo platform: x86: get rid of a non-existent document Add the RCU docs to the core-api manual Documentation: RCU: Add TOC tree hooks Documentation: RCU: Rename txt files to rst Documentation: RCU: Convert RCU UP systems to reST Documentation: RCU: Convert RCU linked list to reST Documentation: RCU: Convert RCU basic concepts to reST docs: filesystems: Remove uneeded .rst extension on toctables scripts/sphinx-pre-install: fix out-of-tree build docs: zh_CN: submitting-drivers.rst: Remove a duplicated Documentation/ Documentation: PGP: update for newer HW devices Documentation: Add section about CPU vulnerabilities for Spectre Documentation: platform: Delete x86-laptop-drivers.txt docs: Note that :c:func: should no longer be used ...
2019-07-09m68k: Don't select ARCH_HAS_DMA_PREP_COHERENT for nommu or coldfireChristoph Hellwig
M68k only provides the arch_dma_prep_coherent symbol when an mmu is enabled and not on the coldfire platform. Fix the Kconfig symbol selection up to match this. Fixes: 69878ef47562 ("m68k: Implement arch_dma_prep_coherent()") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-07-08Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull force_sig() argument change from Eric Biederman: "A source of error over the years has been that force_sig has taken a task parameter when it is only safe to use force_sig with the current task. The force_sig function is built for delivering synchronous signals such as SIGSEGV where the userspace application caused a synchronous fault (such as a page fault) and the kernel responded with a signal. Because the name force_sig does not make this clear, and because the force_sig takes a task parameter the function force_sig has been abused for sending other kinds of signals over the years. Slowly those have been fixed when the oopses have been tracked down. This set of changes fixes the remaining abusers of force_sig and carefully rips out the task parameter from force_sig and friends making this kind of error almost impossible in the future" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits) signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus signal: Remove the signal number and task parameters from force_sig_info signal: Factor force_sig_info_to_task out of force_sig_info signal: Generate the siginfo in force_sig signal: Move the computation of force into send_signal and correct it. signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal signal: Remove the task parameter from force_sig_fault signal: Use force_sig_fault_to_task for the two calls that don't deliver to current signal: Explicitly call force_sig_fault on current signal/unicore32: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from __do_user_fault signal/arm: Remove tsk parameter from ptrace_break signal/nds32: Remove tsk parameter from send_sigtrap signal/riscv: Remove tsk parameter from do_trap signal/sh: Remove tsk parameter from force_sig_info_fault signal/um: Remove task parameter from send_sigtrap signal/x86: Remove task parameter from send_sigtrap signal: Remove task parameter from force_sig_mceerr signal: Remove task parameter from force_sig signal: Remove task parameter from force_sigsegv ...
2019-07-08Merge tag 'm68k-for-v5.3-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - switch to using the generic remapping DMA allocator - defconfig updates * tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Implement arch_dma_prep_coherent() m68k: Use the generic dma coherent remap allocator m68k: defconfig: Update defconfigs for v5.2-rc1
2019-07-01m68k: Implement arch_dma_prep_coherent()Christoph Hellwig
When we remap memory as non-cached, to be used as a DMA coherent buffer, we should writeback all cache and invalidate the cache lines so that we make sure we have a clean slate. Implement this using the cache_push() helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-07-01m68k: Use the generic dma coherent remap allocatorChristoph Hellwig
This switches m68k to using common code for the DMA allocations, including potential use of the CMA allocator if configured. Also add a comment where the existing behavior seems to be lacking. Switching to the generic code enables DMA allocations from atomic context, which is required by the DMA API documentation, and also adds various other minor features drivers start relying upon. It also makes sure we have a tested code base for all architectures that require uncached pte bits for coherent DMA allocations. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-06-28arch: wire-up pidfd_open()Christian Brauner
This wires up the pidfd_open() syscall into all arches at once. Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: David Howells <dhowells@redhat.com> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-api@vger.kernel.org Cc: linux-alpha@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-ia64@vger.kernel.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-mips@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org
2019-06-24binfmt_flat: provide an asm-generic/flat.hChristoph Hellwig
This file implements the flat get/put reloc helpers for architectures that do not need to overload the relocs by simply using get_user/put_user. Note that many nommu architectures currently use {get,put}_unaligned, which looks a little bogus and should probably later be switched over to this version as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: add a ARCH_HAS_BINFMT_FLAT optionChristoph Hellwig
Allow architectures to opt into ARCH_HAS_BINFMT_FLAT support instead of assuming that all nommu ports support the format. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: replace flat_argvp_envp_on_stack with a Kconfig variableChristoph Hellwig
This will eventually allow us to kill the need for an <asm/flat.h> for many cases. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_old_ram_flagChristoph Hellwig
Instead add a Kconfig variable that only h8300 selects. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: provide a default version of flat_get_relocate_addrChristoph Hellwig
This way only the two architectures that do masking need to provide the helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_set_persistentChristoph Hellwig
This helper is a no-op on all architectures, remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove flat_reloc_validChristoph Hellwig
This helper is the same for all architectures, open code it in the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-20scsi: mac_scsi: Enable PDMA on Mac IIfxFinn Thain
Add support for Apple's custom "SCSI DMA" chip. This patch doesn't make use of its DMA capability. Just the PDMA capability is sufficient to improve sequential read throughput by a factor of 5. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Joshua Thompson <funaho@jurai.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-14docs: ide: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-03m68k: defconfig: Update defconfigs for v5.2-rc1Geert Uytterhoeven
Actual changes: +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set +CONFIG_CRYPTO_ECRDSA=m -CONFIG_CRYPTO_STREEBOG=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m +# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_NFT_CHAIN_ROUTE_IPV4=m -CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_TEST_STRSCPY=m -# CONFIG_UEVENT_HELPER is not set Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-05-30treewide: Add SPDX license identifier - KbuildGreg Kroah-Hartman
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-29signal: Remove the task parameter from force_sig_faultEric W. Biederman
As synchronous exceptions really only make sense against the current task (otherwise how are you synchronous) remove the task parameter from from force_sig_fault to make it explicit that is what is going on. The two known exceptions that deliver a synchronous exception to a stopped ptraced task have already been changed to force_sig_fault_to_task. The callers have been changed with the following emacs regular expression (with obvious variations on the architectures that take more arguments) to avoid typos: force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)] -> force_sig_fault(\1,\2,\3) Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-27signal: Remove task parameter from force_sigEric W. Biederman
All of the remaining callers pass current into force_sig so remove the task parameter to make this obvious and to make misuse more difficult in the future. This also makes it clear force_sig passes current into force_sig_info. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 74Thomas Gleixner
Based on 1 normalized pattern(s): you may copy modify and redistribute this file under the terms of the gnu general public license version 2 or any later version at your convenience extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071859.937199252@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-17Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull more vfs mount updates from Al Viro: "Propagation of new syscalls to other architectures + cosmetic change from Christian (fscontext didn't follow the convention for anon inode names)" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: Wire up the mount API syscalls on non-x86 arches [ver #2] uapi, x86: Fix the syscall numbering of the mount API syscalls [ver #2] uapi, fsopen: use square brackets around "fscontext" [ver #2]
2019-05-16uapi: Wire up the mount API syscalls on non-x86 arches [ver #2]David Howells
Wire up the mount API syscalls on non-x86 arches. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-14mm: memblock: make keeping memblock memory opt-in rather than opt-outMike Rapoport
Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14initramfs: provide a generic free_initrd_mem implementationChristoph Hellwig
For most architectures free_initrd_mem just expands to the same free_reserved_area call. Provide that as a generic implementation marked __weak. Link: http://lkml.kernel.org/r/20190213174621.29297-8-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> [arm64] Cc: Steven Price <steven.price@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Russell King <linux@armlinux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-07Merge tag 'audit-pr-20190507' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: "We've got a reasonably broad set of audit patches for the v5.2 merge window, the highlights are below: - The biggest change, and the source of all the arch/* changes, is the patchset from Dmitry to help enable some of the work he is doing around PTRACE_GET_SYSCALL_INFO. To be honest, including this in the audit tree is a bit of a stretch, but it does help move audit a little further along towards proper syscall auditing for all arches, and everyone else seemed to agree that audit was a "good" spot for this to land (or maybe they just didn't want to merge it? dunno.). - We can now audit time/NTP adjustments. - We continue the work to connect associated audit records into a single event" * tag 'audit-pr-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: (21 commits) audit: fix a memory leak bug ntp: Audit NTP parameters adjustment timekeeping: Audit clock adjustments audit: purge unnecessary list_empty calls audit: link integrity evm_write_xattrs record to syscall event syscall_get_arch: add "struct task_struct *" argument unicore32: define syscall_get_arch() Move EM_UNICORE to uapi/linux/elf-em.h nios2: define syscall_get_arch() nds32: define syscall_get_arch() Move EM_NDS32 to uapi/linux/elf-em.h m68k: define syscall_get_arch() hexagon: define syscall_get_arch() Move EM_HEXAGON to uapi/linux/elf-em.h h8300: define syscall_get_arch() c6x: define syscall_get_arch() arc: define syscall_get_arch() Move EM_ARCOMPACT and EM_ARCV2 to uapi/linux/elf-em.h audit: Make audit_log_cap and audit_copy_inode static audit: connect LOGIN record to its syscall record ...
2019-05-07Merge tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: "Nothing major in this series, just fixes and improvements all over the map. This contains: - Series of fixes for sed-opal (David, Jonas) - Fixes and performance tweaks for BFQ (via Paolo) - Set of fixes for bcache (via Coly) - Set of fixes for md (via Song) - Enabling multi-page for passthrough requests (Ming) - Queue release fix series (Ming) - Device notification improvements (Martin) - Propagate underlying device rotational status in loop (Holger) - Removal of mtip32xx trim support, which has been disabled for years (Christoph) - Improvement and cleanup of nvme command handling (Christoph) - Add block SPDX tags (Christoph) - Cleanup/hardening of bio/bvec iteration (Christoph) - A few NVMe pull requests (Christoph) - Removal of CONFIG_LBDAF (Christoph) - Various little fixes here and there" * tag 'for-5.2/block-20190507' of git://git.kernel.dk/linux-block: (164 commits) block: fix mismerge in bvec_advance block: don't drain in-progress dispatch in blk_cleanup_queue() blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release blk-mq: always free hctx after request queue is freed blk-mq: split blk_mq_alloc_and_init_hctx into two parts blk-mq: free hw queue's resource in hctx's release handler blk-mq: move cancel of requeue_work into blk_mq_release blk-mq: grab .q_usage_counter when queuing request from plug code path block: fix function name in comment nvmet: protect discovery change log event list iteration nvme: mark nvme_core_init and nvme_core_exit static nvme: move command size checks to the core nvme-fabrics: check more command sizes nvme-pci: check more command sizes nvme-pci: remove an unneeded variable initialization nvme-pci: unquiesce admin queue on shutdown nvme-pci: shutdown on timeout during deletion nvme-pci: fix psdt field for single segment sgls nvme-multipath: don't print ANA group state by default nvme-multipath: split bios with the ns_head bio_set before submitting ...
2019-05-06Merge tag 'arm64-mmiowb' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull mmiowb removal from Will Deacon: "Remove Mysterious Macro Intended to Obscure Weird Behaviours (mmiowb()) Remove mmiowb() from the kernel memory barrier API and instead, for architectures that need it, hide the barrier inside spin_unlock() when MMIO has been performed inside the critical section. The only relatively recent changes have been addressing review comments on the documentation, which is in a much better shape thanks to the efforts of Ben and Ingo. I was initially planning to split this into two pull requests so that you could run the coccinelle script yourself, however it's been plain sailing in linux-next so I've just included the whole lot here to keep things simple" * tag 'arm64-mmiowb' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (23 commits) docs/memory-barriers.txt: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt: Fix style, spacing and grammar in I/O section arch: Remove dummy mmiowb() definitions from arch code net/ethernet/silan/sc92031: Remove stale comment about mmiowb() i40iw: Redefine i40iw_mmiowb() to do nothing scsi/qla1280: Remove stale comment about mmiowb() drivers: Remove explicit invocations of mmiowb() drivers: Remove useless trailing comments from mmiowb() invocations Documentation: Kill all references to mmiowb() riscv/mmiowb: Hook up mmwiob() implementation to asm-generic code powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code ia64/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() mips/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() sh/mmiowb: Add unconditional mmiowb() to arch_spin_unlock() m68k/io: Remove useless definition of mmiowb() nds32/io: Remove useless definition of mmiowb() x86/io: Remove useless definition of mmiowb() arm64/io: Remove useless definition of mmiowb() ARM/io: Remove useless definition of mmiowb() mmiowb: Hook up mmiowb helpers to spinlocks and generic I/O accessors ...
2019-05-06Merge tag 'm68k-for-v5.2-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - drop arch_gettimeoffset and adopt clocksource API - defconfig updates * tag 'm68k-for-v5.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: Documentation/features/time: Mark m68k having modern-timekeeping m68k: defconfig: Update defconfigs for v5.1-rc1 m68k: mvme16x: Handle timer counter overflow m68k: mvme16x: Convert to clocksource API m68k: mvme147: Handle timer counter overflow m68k: mvme147: Convert to clocksource API m68k: mac: Convert to clocksource API m68k: hp300: Handle timer counter overflow m68k: hp300: Convert to clocksource API m68k: bvme6000: Convert to clocksource API m68k: atari: Convert to clocksource API m68k: amiga: Convert to clocksource API m68k: Drop ARCH_USES_GETTIMEOFFSET m68k: apollo, q40, sun3, sun3x: Remove arch_gettimeoffset implementations m68k: mac: Fix VIA timer counter accesses m68k: Call timer_interrupt() with interrupts disabled
2019-05-06Merge branch 'locking-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "Here are the locking changes in this cycle: - rwsem unification and simpler micro-optimizations to prepare for more intrusive (and more lucrative) scalability improvements in v5.3 (Waiman Long) - Lockdep irq state tracking flag usage cleanups (Frederic Weisbecker) - static key improvements (Jakub Kicinski, Peter Zijlstra) - misc updates, cleanups and smaller fixes" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) locking/lockdep: Remove unnecessary unlikely() locking/static_key: Don't take sleeping locks in __static_key_slow_dec_deferred() locking/static_key: Factor out the fast path of static_key_slow_dec() locking/static_key: Add support for deferred static branches locking/lockdep: Test all incompatible scenarios at once in check_irq_usage() locking/lockdep: Avoid bogus Clang warning locking/lockdep: Generate LOCKF_ bit composites locking/lockdep: Use expanded masks on find_usage_*() functions locking/lockdep: Map remaining magic numbers to lock usage mask names locking/lockdep: Move valid_state() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING locking/rwsem: Prevent unneeded warning during locking selftest locking/rwsem: Optimize rwsem structure for uncontended lock acquisition locking/rwsem: Enable lock event counting locking/lock_events: Don't show pvqspinlock events on bare metal locking/lock_events: Make lock_events available for all archs & other locks locking/qspinlock_stat: Introduce generic lockevent_*() counting APIs locking/rwsem: Enhance DEBUG_RWSEMS_WARN_ON() macro locking/rwsem: Add debug check for __down_read*() locking/rwsem: Micro-optimize rwsem_try_read_lock_unqueued() locking/rwsem: Move rwsem internal function declarations to rwsem-xadd.h ...
2019-05-06Merge branch 'core-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull unified TLB flushing from Ingo Molnar: "This contains the generic mmu_gather feature from Peter Zijlstra, which is an all-arch unification of TLB flushing APIs, via the following (broad) steps: - enhance the <asm-generic/tlb.h> APIs to cover more arch details - convert most TLB flushing arch implementations to the generic <asm-generic/tlb.h> APIs. - remove leftovers of per arch implementations After this series every single architecture makes use of the unified TLB flushing APIs" * 'core-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mm/resource: Use resource_overlaps() to simplify region_intersects() ia64/tlb: Eradicate tlb_migrate_finish() callback asm-generic/tlb: Remove tlb_table_flush() asm-generic/tlb: Remove tlb_flush_mmu_free() asm-generic/tlb: Remove CONFIG_HAVE_GENERIC_MMU_GATHER asm-generic/tlb: Remove arch_tlb*_mmu() s390/tlb: Convert to generic mmu_gather asm-generic/tlb: Introduce CONFIG_HAVE_MMU_GATHER_NO_GATHER=y arch/tlb: Clean up simple architectures um/tlb: Convert to generic mmu_gather sh/tlb: Convert SH to generic mmu_gather ia64/tlb: Convert to generic mmu_gather arm/tlb: Convert to generic mmu_gather asm-generic/tlb, arch: Invert CONFIG_HAVE_RCU_TABLE_INVALIDATE asm-generic/tlb, ia64: Conditionally provide tlb_migrate_finish() asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm() asm-generic/tlb, arch: Provide generic tlb_flush() based on flush_tlb_range() asm-generic/tlb, arch: Provide generic VIPT cache flush asm-generic/tlb, arch: Provide CONFIG_HAVE_MMU_GATHER_PAGE_SIZE asm-generic/tlb: Provide a comment
2019-04-23Merge tag 'syscalls-5.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull syscall numbering updates from Arnd Bergmann: "arch: add pidfd and io_uring syscalls everywhere This comes a bit late, but should be in 5.1 anyway: we want the newly added system calls to be synchronized across all architectures in the release. I hope that in the future, any newly added system calls can be added to all architectures at the same time, and tested there while they are in linux-next, avoiding dependencies between the architecture maintainer trees and the tree that contains the new system call" * tag 'syscalls-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: arch: add pidfd and io_uring syscalls everywhere
2019-04-15arch: add pidfd and io_uring syscalls everywhereArnd Bergmann
Add the io_uring and pidfd_send_signal system calls to all architectures. These system calls are designed to handle both native and compat tasks, so all entries are the same across architectures, only arm-compat and the generic tale still use an old format. Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> (s390) Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-04-08m68k/io: Remove useless definition of mmiowb()Will Deacon
m68k includes asm-generic/io.h, which provides a dummy definition of mmiowb() if one isn't already provided by the architecture. Remove the useless definition. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08arch: Use asm-generic header for asm/mmiowb.hWill Deacon
Hook up asm-generic/mmiowb.h to Kbuild for all architectures so that we can subsequently include asm/mmiowb.h from core code. Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-06block: remove CONFIG_LBDAFChristoph Hellwig
Currently support for 64-bit sector_t and blkcnt_t is optional on 32-bit architectures. These types are required to support block device and/or file sizes larger than 2 TiB, and have generally defaulted to on for a long time. Enabling the option only increases the i386 tinyconfig size by 145 bytes, and many data structures already always use 64-bit values for their in-core and on-disk data structures anyway, so there should not be a large change in dynamic memory usage either. Dropping this option removes a somewhat weird non-default config that has cause various bugs or compiler warnings when actually used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-03locking/rwsem: Remove rwsem-spinlock.c & use rwsem-xadd.c for all archsWaiman Long
Currently, we have two different implementation of rwsem: 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c) 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c) As we are going to use a single generic implementation for rwsem-xadd.c and no architecture-specific code will be needed, there is no point in keeping two different implementations of rwsem. In most cases, the performance of rwsem-spinlock.c will be worse. It also doesn't get all the performance tuning and optimizations that had been implemented in rwsem-xadd.c over the years. For simplication, we are going to remove rwsem-spinlock.c and make all architectures use a single implementation of rwsem - rwsem-xadd.c. All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM in the code are removed. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-riscv@lists.infradead.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linuxppc-dev@lists.ozlabs.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: uclinux-h8-devel@lists.sourceforge.jp Link: https://lkml.kernel.org/r/20190322143008.21313-3-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-04-03arch/tlb: Clean up simple architecturesPeter Zijlstra
For the architectures that do not implement their own tlb_flush() but do already use the generic mmu_gather, there are two options: 1) the platform has an efficient flush_tlb_range() and asm-generic/tlb.h doesn't need any overrides at all. 2) the platform lacks an efficient flush_tlb_range() and we select MMU_GATHER_NO_RANGE to minimize full invalidates. Convert all 'simple' architectures to one of these two forms. alpha: has no range invalidate -> 2 arc: already used flush_tlb_range() -> 1 c6x: has no range invalidate -> 2 hexagon: has an efficient flush_tlb_range() -> 1 (flush_tlb_mm() is in fact a full range invalidate, so no need to shoot down everything) m68k: has inefficient flush_tlb_range() -> 2 microblaze: has no flush_tlb_range() -> 2 mips: has efficient flush_tlb_range() -> 1 (even though it currently seems to use flush_tlb_mm()) nds32: already uses flush_tlb_range() -> 1 nios2: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) openrisc: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) parisc: already uses flush_tlb_range() -> 1 sparc32: already uses flush_tlb_range() -> 1 unicore32: has inefficient flush_tlb_range() -> 2 (no limit on range iteration) xtensa: has efficient flush_tlb_range() -> 1 Note this also fixes a bug in the existing code for a number platforms. Those platforms that did: tlb_end_vma() -> if (!full_mm) flush_tlb_*() tlb_flush -> if (full_mm) flush_tlb_mm() missed the case of shift_arg_pages(), which doesn't have @fullmm set, nor calls into tlb_*vma(), but still frees page-tables and thus needs an invalidate. The new code handles this by detecting a non-empty range, and either issuing the matching range invalidate or a full invalidate, depending on the capabilities. No change in behavior intended. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Helge Deller <deller@gmx.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Ley Foon Tan <lftan@altera.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Salter <msalter@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Piggin <npiggin@gmail.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>