summaryrefslogtreecommitdiff
path: root/arch/m68k/mm
AgeCommit message (Collapse)Author
2013-04-29mm/m68k: use common help functions to free reserved pagesJiang Liu
Use common help functions to free reserved pages. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-04m68knommu: fix build when CPU is not coldfireThadeu Lima de Souza Cascardo
Commit dd1cb3a7c43508c29e17836628090c0735bd3137 [merge MMU and non-MMU versions of mm/init.c] unified mm/init.c for both MMU and non-MMU m68k platforms. However, it broke when we build a non-MMU M68K Classic CPU kernel. This fix builds a section that came from the MMU version only when we are building a MMU kernel. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2013-01-07m68k: fix conditional use of init_pointer_tableGreg Ungerer
Compiling 3.8-rc1 fails for some m68k targets (the non-mmu ones) with: CC arch/m68k/mm/init.o arch/m68k/mm/init.c: In function ‘mem_init’: arch/m68k/mm/init.c:191:2: error: implicit declaration of function ‘init_pointer_table’ arch/m68k/mm/init.c:191:36: error: ‘kernel_pg_dir’ undeclared (first use in this function) arch/m68k/mm/init.c:191:36: note: each undeclared identifier is reported only once for each function it appears in arch/m68k/mm/init.c:192:18: error: ‘PTRS_PER_PGD’ undeclared (first use in this function) arch/m68k/mm/init.c:194:4: error: implicit declaration of function ‘__pgd_page’ arch/m68k/mm/init.c:198:6: error: ‘zero_pgtable’ undeclared (first use in this function) make[2]: *** [arch/m68k/mm/init.o] Error 1 make[1]: *** [arch/m68k/mm] Error 2 make[1]: Leaving directory `/home/gerg/new-wave.git/linux-3.x' make: *** [linux] Error 1 Change the conditions that define init_pointer_table so that it matches what actually uses it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-11-14m68k: move to a single instance of free_initmem()Greg Ungerer
Currently each sub-architecture has its own implementation if init_freemem(). There is two different cases that the various implementations deal with. They either free the init memory, or they don't. We only need a single instance to cover all cases. The non-MMU version did some page alignment twidling, but this is not neccessary. The current linker script enforces page alignment. It also checked for CONFIG_RAMKERNEL, but this also is not necessary, the linker script always keeps the init sections in RAM. The MMU ColdFire version of free_initmem() was empty. There is no reason it can't carry out the freeing of the init memory. So it is now changed and tested to do this. For the other MMU cases the code is the same. For the general Motorola MMU case we free the init memory. For the SUN3 case we do nothing (though I think it could safely free the init memory as well). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-11-14m68k: merge MMU and non-MMU versions of mm/init.cGreg Ungerer
Some of the code in the existing mm/init_mm.c and mm/init_no.c files is the same, and if we merge them back to a single file we can save some code duplication. Although the old mem_init() code for non-MMU was a little different than the MMU version, it turns out we can use the same code. So I now we just use the MMU mem_init() code for all. It also means we now get identical console info messages for this code on kernel boot up. So merge the two files back into a single file. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-10-09readahead: fault retry breaks mmap file read random detectionShaohua Li
.fault now can retry. The retry can break state machine of .fault. In filemap_fault, if page is miss, ra->mmap_miss is increased. In the second try, since the page is in page cache now, ra->mmap_miss is decreased. And these are done in one fault, so we can't detect random mmap file access. Add a new flag to indicate .fault is tried once. In the second try, skip ra->mmap_miss decreasing. The filemap_fault state machine is ok with it. I only tested x86, didn't test other archs, but looks the change for other archs is obvious, but who knows :) Signed-off-by: Shaohua Li <shaohua.li@fusionio.com> Cc: Rik van Riel <riel@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Make sys_atomic_cmpxchg_32 work on classic m68k m68k/apollo: Rename "timer" to "apollo_timer" zorro: Remove unused zorro_bus.devices m68k: Remove never used asm/shm.h m68k/sun3: Remove unselectable code in prom_init() m68k: Use asm-generic version of <asm/sections.h> m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop} mtd/uclinux: Use generic __bss_stop instead of _ebss m68knommu: Allow ColdFire CPUs to use unaligned accesses m68k: Remove five unused headers m68k: CPU32 does not support unaligned accesses m68k: Introduce config option CPU_HAS_NO_UNALIGNED m68k: delay, muldi3 - Use CONFIG_CPU_HAS_NO_MULDIV64 m68k: Move CPU_HAS_* config options m68k: Remove duplicate FPU config option m68knommu: Clean up printing of sections m68k: Use asm-generic version of <asm/types.h> m68k: Use Kbuild logic to import asm-generic headers
2012-07-17m68k: fix ColdFire clear cache operationGreg Ungerer
The code for clearing (invalidating) the ColdFire cache is actually performing a push operation. Add functions to clear the cache, and fix cache_clear() to call the appropriate clear cache function. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-27m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}Geert Uytterhoeven
BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-04-22m68k/mm: Port OOM changes to do_page_fault()Kautuk Consul
Commit d065bd810b6deb67d4897a14bfe21f8eb526ba99 (mm: retry page fault when blocking on disk transfer) and commit 37b23e0525d393d48a7d59f870b3bc061a30ccdb (x86,mm: make pagefault killable) The above commits introduced changes into the x86 pagefault handler for making the page fault handler retryable as well as killable. These changes reduce the mmap_sem hold time, which is crucial during OOM killer invocation. Port these changes to m68k. Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-03-28Disintegrate asm/system.h for M68KDavid Howells
Disintegrate asm/system.h for M68K. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Greg Ungerer <gerg@uclinux.org> cc: linux-m68k@lists.linux-m68k.org
2012-02-07m68k: Do not set global share for non-kernel shared pagesAlexander Stein
If the SG bit is set in MMUTR the page is accessible for all userspace processes (ignoring the ASID). So a process might randomly access a page from a different process which had a shared page (from shared memory) in its context. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-01-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix assembler constraint to prevent overeager gcc optimisation mac_esp: rename irq mac_scsi: dont enable mac_scsi irq before requesting it macfb: fix black and white modes m68k/irq: Remove obsolete IRQ_FLG_* definitions Fix up trivial conflict in arch/m68k/kernel/process_mm.c as per Geert.
2012-01-22m68k: Fix assembler constraint to prevent overeager gcc optimisationAndreas Schwab
Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org
2011-12-30m68k: add ColdFire with MMU enabled support to the m68k mem init codeGreg Ungerer
The ColdFire has similar setup requirements to the SUN3 code, so we use that. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: compile appropriate mm arch files for ColdFire MMU supportGreg Ungerer
Create a config symbol to enable when using a ColdFire MMU. We then use that to only compile the necessary arch mm files. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: ColdFire V4e MMU paging init code and miss handlerGreg Ungerer
The different ColdFire V4e MMU requires its own dedicated paging init code, and a TLB miss handler for its software driven TLB. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: use ColdFire MMU read/write bit flags when ioremappingGreg Ungerer
The ColdFire MMU has separate read and write bits, unlike the Motorola m68k MMU which has a single read-only bit. Define a _PAGE_READWRITE value for the Motorola MMU, which is 0, so we can unconditionaly include that in the page table entry bits when setting up ioremapped pages. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-30m68k: modify cache push and clear code for ColdFire with MMU enableGreg Ungerer
The cache push and clear code only need to flush the branch cache on the write-through cache setup of the ColdFire V4e with MMU enabled. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-30m68k: add cache support for V4e ColdFire cores running with MMU enabledGreg Ungerer
Add code to deal with instruction, data and branch caches of the V4e ColdFire cores when they are running with the MMU enabled. This code is loosely based on Freescales changes for the caches of the V4e ColdFire in the 2.6.25 kernel BSP. That code was originally by Kurt Mahan <kmahan@freescale.com> (now <kmahan@xmission.com>). Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Matt Waddel <mwaddel@yahoo.com> Acked-by: Kurt Mahan <kmahan@xmission.com>
2011-12-24m68k: print memory layout info in boot logGreg Ungerer
Output a table of the kernel memory regions at boot time. This is taken directly from the ARM architecture code that does this. The table looks like this: Virtual kernel memory layout: vector : 0x00000000 - 0x00000400 ( 0 KiB) kmap : 0xd0000000 - 0xe0000000 ( 256 MiB) vmalloc : 0xc0000000 - 0xcfffffff ( 255 MiB) lowmem : 0x00000000 - 0x02000000 ( 32 MiB) .init : 0x00128000 - 0x00134000 ( 48 KiB) .text : 0x00020000 - 0x00118d54 ( 996 KiB) .data : 0x00118d60 - 0x00126000 ( 53 KiB) .bss : 0x00134000 - 0x001413e0 ( 53 KiB) This has been very useful while debugging the ColdFire virtual memory support code. But in general I think it is nice to know extacly where the kernel has layed everything out on boot. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-10-18m68knommu: create common externs for _ram* varsGreg Ungerer
Create common extern definitions of _rambase, _ramstart and _ramend instead of them being externed when used in code. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-10-18m68knommu: remove extern declarations of memory_start/memory_end from mm/initGreg Ungerer
We do not need to have local extern declarations of memory_start and memory_end in mm/init_no.c. There are declarations already in asm/page_no.h. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-10-18m68knommu: use generic section names in mm/init codeGreg Ungerer
We should be including and using sections.h to get at the extern definitions of the linker sections in the m68knommu mm init code. Not defining them locally. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/math-emu: Remove unnecessary code m68k/math-emu: Remove commented out old code m68k: Kill warning in setup_arch() when compiling for Sun3 m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_ sparc: iounmap() and *_free_coherent() - Use lookup_resource() m68k/atari: Reserve some ST-RAM early on for device buffer use m68k/amiga: Chip RAM - Use lookup_resource() resources: Add lookup_resource() sparc: _sparc_find_resource() should check for exact matches m68k/amiga: Chip RAM - Offset resource end by CHIP_PHYSADDR m68k/amiga: Chip RAM - Use resource_size() to fix off-by-one error m68k/amiga: Chip RAM - Change chipavail to an atomic_t m68k/amiga: Chip RAM - Always allocate from the start of memory m68k/amiga: Chip RAM - Convert from printk() to pr_*() m68k/amiga: Chip RAM - Use tabs for indentation
2011-07-30m68k/atari: Reserve some ST-RAM early on for device buffer useMichael Schmitz
Based on an original patch from Michael Schmitz: Because mem_init() is now called before device init, devices that rely on ST-RAM may find all ST-RAM already allocated to other users by the time device init happens. In particular, a large initrd RAM disk may use up enough of ST-RAM to cause atari_stram_alloc() to resort to __get_dma_pages() allocation. In the current state of Atari memory management, all of RAM is marked DMA capable, so __get_dma_pages() may well return RAM that is not in actual fact DMA capable. Using this for frame buffer or SCSI DMA buffer causes subtle failure. The ST-RAM allocator has been changed to allocate memory from a pool of reserved ST-RAM of configurable size, set aside on ST-RAM init (i.e. before mem_init()). As long as this pool is not exhausted, allocation of real ST-RAM can be guaranteed. Other changes: - Replace the custom allocator in the ST-RAM pool by the existing allocator in the resource subsystem, - Remove mem_init_done and its hook, as memory init is now done before device init, - Remove /proc/stram, as ST-RAM usage now shows up under /proc/iomem, e.g. 005f2000-006f1fff : ST-RAM Pool 005f2000-0063dfff : atafb 0063e000-00641fff : ataflop 00642000-00642fff : SCSI Signed-off-by: Michael Schmitz <schmitz@debian.org> [Andreas Schwab <schwab@linux-m68k.org>: Use memparse()] [Geert: Use the resource subsystem instead of a custom allocator] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-07-25m68knommu: Fix printk() format in free_initrd_mem()Geert Uytterhoeven
arch/m68k/mm/init_no.c:123: warning: format "%d" expects type "int", but argument 2 has type "long unsigned int" And use pr_notice() while we're at it. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-07-25m68knommu: Make empty_zero_page "void *", like on m68kGeert Uytterhoeven
This allows to get rid of the casts. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-25mm: now that all old mmu_gather code is gone, remove the storagePeter Zijlstra
Fold all the mmu_gather rework patches into one for submission Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: Hugh Dickins <hughd@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Namhyung Kim <namhyung@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-24m68knommu: clean up mm/init_no.cGreg Ungerer
The memory initialization code for m68knommu has grown a bit crufty, clean it up. . remove unused declaration for die_if_kernel() . remove un-needed declaration of free_initmem() . removed unused definitions of empty_bad_page and empty_bad_page_table . removed unused DEBUG code . make free_initmem() proper prototype Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68k: merge the mmu and non-mmu mm/MakefileGreg Ungerer
Its is trivial to megre the mmu and non-mmu arch/m68k/mm/Makefile's back into a single file. So do it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68k: mv kmap_mm.c to kmap.cGreg Ungerer
The non-mmu kmap_no.c has been removed. So we can move kmap_mm.c back to being the only kmap.c. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68knommu: remove stubs for __ioremap() and iounmap()Greg Ungerer
The implementation of iounmap() and __ioremap() for non-mmu m68k is trivial. We can inline them in m68knommu headers and remove the trivial implementations. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-05-24m68knommu: remove unused kernel_set_cachemode()Greg Ungerer
None of the m68knommu platforms will ever use kernel_set_cachemode(). And it is specific to a couple of m68k devices. So remove it. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-04-27m68k/mm: Set all online nodes in N_NORMAL_MEMORYMichael Schmitz
For m68k, N_NORMAL_MEMORY represents all nodes that have present memory since it does not support HIGHMEM. This patch sets the bit at the time node_present_pages has been set by free_area_init_node. At the time the node is brought online, the node state would have to be done unconditionally since information about present memory has not yet been recorded. If N_NORMAL_MEMORY is not accurate, slub may encounter errors since it uses this nodemask to setup per-cache kmem_cache_node data structures. This pach is an alternative to the one proposed by David Rientjes <rientjes@google.com> attempting to set node state immediately when bringing the node online. Signed-off-by: Michael Schmitz <schmitz@debian.org> Tested-by: Thorsten Glaser <tg@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> CC: stable@kernel.org
2011-03-25m68k: merge m68k and m68knommu arch directoriesGreg Ungerer
There is a lot of common code that could be shared between the m68k and m68knommu arch branches. It makes sense to merge the two branches into a single directory structure so that we can more easily share that common code. This is a brute force merge, based on a script from Stephen King <sfking@fdwdc.com>, which was originally written by Arnd Bergmann <arnd@arndb.de>. > The script was inspired by the script Sam Ravnborg used to merge the > includes from m68knommu. For those files common to both arches but > differing in content, the m68k version of the file is renamed to > <file>_mm.<ext> and the m68knommu version of the file is moved into the > corresponding m68k directory and renamed <file>_no.<ext> and a small > wrapper file <file>.<ext> is used to select between the two version. Files > that are common to both but don't differ are removed from the m68knommu > tree and files and directories that are unique to the m68knommu tree are > moved to the m68k tree. Finally, the arch/m68knommu tree is removed. > > To select between the the versions of the files, the wrapper uses > > #ifdef CONFIG_MMU > #include <file>_mm.<ext> > #else > #include <file>_no.<ext> > #endif On top of this file merge I have done a simplistic merge of m68k and m68knommu Kconfig, which primarily attempts to keep existing options and menus in place. Other than a handful of options being moved it produces identical .config outputs on m68k and m68knommu targets I tested it on. With this in place there is now quite a bit of scope for merge cleanups in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-16m68k: Add helper function handle_kernel_fault()Roman Zippel
Add helper function handle_kernel_fault() in signal.c, so frame_extra_sizes can become static, and to avoid future code duplication. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-05-17m68k: invoke oom-killer from page faultNick Piggin
As explained in commit 1c0fe6e3bd, we want to call the architecture independent oom killer when getting an unexplained OOM from handle_mm_fault, rather than simply killing current. Cc: linux-m68k@lists.linux-m68k.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: David Rientjes <rientjes@google.com> [Geert] Kill 2 introduced compiler warnings Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-27m68k{,nommu}/h8300: Remove obsolete comment about map_chunkPhilippe De Muyter
Remove the comments referring to a function map_chunk that no longer exists. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27m68k: Allow ioremapping top of memoryPhilippe De Muyter
The test in __ioremap to reject memory ranges crossing the 0 boundary rejects also memory ranges ending at the end of the memory. Fix that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-09-22arches: drop superfluous casts in nr_free_pages() callersGeert Uytterhoeven
Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()") modified nr_free_pages() to return 'unsigned long' instead of 'unsigned int'. This made the casts to 'unsigned long' in most callers superfluous, so remove them. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <zankel@tensilica.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-21Move FAULT_FLAG_xyz into handle_mm_fault() callersLinus Torvalds
This allows the callers to now pass down the full set of FAULT_FLAG_xyz flags to handle_mm_fault(). All callers have been (mechanically) converted to the new calling convention, there's almost certainly room for architectures to clean up their code and then add FAULT_FLAG_RETRY when that support is added. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-12m68k: Kill several external declarations in source filesGeert Uytterhoeven
- Replace external declarations by proper includes where availiable. The accesses to some symbols had to be modified, as before they were declared using e.g. "extern int _end", while asm-generic/sections.h uses e.g. "extern char _end[]" - Remove unused or superfluous external declarations Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-10-14arch/m68k/mm/kmap.c: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,l; position p1,p2; expression *ptr != NULL; @@ ( if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S | x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); .. if (x == NULL) S ) <... when != x when != if (...) { <+...x...+> } x->f = E ..> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26m68k: use generic show_mem()Johannes Weiner
Remove arch-specific show_mem() in favor of the generic version. This also removes the following redundant information display: - free pages, printed by show_free_areas() - pages in swapcache, printed by show_swap_cache_info() where show_mem() calls show_free_areas(), which calls show_swap_cache_info(). Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mm: drop unneeded pgdat argument from free_area_init_node()Johannes Weiner
free_area_init_node() gets passed in the node id as well as the node descriptor. This is redundant as the function can trivially get the node descriptor itself by means of NODE_DATA() and the node's id. I checked all the users and NODE_DATA() seems to be usable everywhere from where this function is called. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mm: move bootmem descriptors definition to a single placeJohannes Weiner
There are a lot of places that define either a single bootmem descriptor or an array of them. Use only one central array with MAX_NUMNODES items instead. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20arch/m68k/mm/sun3mmu.c: Eliminate NULL test and memset after alloc_bootmemJulia Lawall
As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E - memset(E,0,E1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20arch/m68k/mm/motorola.c: Eliminate NULL test and memset after alloc_bootmemJulia Lawall
As noted by Akinobu Mita in patch b1fceac2b9e04d278316b2faddf276015fc06e3b, alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; statement S; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E ( - BUG_ON (E == NULL); | - if (E == NULL) S ) @@ expression E,E1; @@ E = \(alloc_bootmem\|alloc_bootmem_low\|alloc_bootmem_pages\|alloc_bootmem_low_pages\)(...) .. when != E - memset(E,0,E1); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 12:18:40 +0000