summaryrefslogtreecommitdiff
path: root/arch/m68k/mac/via.c
AgeCommit message (Collapse)Author
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-11-23m68k: mac: Remove redundant VIA register writesFinn Thain
There's no need to write the same value to the timer latch and timer counter registers. Values written to the counter registers get stored in the latches anyway. The write to vT1CH copies the latch values to the counter. Cc: Joshua Thompson <funaho@jurai.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/c6b1d9620af3e8f89dd0157a41fa4147294b251d.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-11-23m68k: mac: Remove dead codeFinn Thain
Cc: Joshua Thompson <funaho@jurai.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/effef6339c919a4ef2e81a47e4383f712cdd7626.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-10-30m68k: remove timer_interrupt() functionArnd Bergmann
This gets passed to a number of init functions, but is ignored everywhere, so remove the function and change the mach_sched_init callback to take no arguments. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-30m68k: change remaining timers to legacy_timer_tickArnd Bergmann
There are nine more machines that each have their own timer interrupt calling the m68k timer_interrupt() function through an indirect pointer. This function is now the same as legacy_timer_tick, so just call that directly and select the corresponding Kconfig symbol. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-05-25m68k: mac: Don't call via_flush_cache() on Mac IIfxFinn Thain
There is no VIA2 chip on the Mac IIfx, so don't call via_flush_cache(). This avoids a boot crash which appeared in v5.4. printk: console [ttyS0] enabled printk: bootconsole [debug0] disabled printk: bootconsole [debug0] disabled Calibrating delay loop... 9.61 BogoMIPS (lpj=48064) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) devtmpfs: initialized random: get_random_u32 called from bucket_table_alloc.isra.27+0x68/0x194 with crng_init=0 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: -1, 3072 bytes, linear) NET: Registered protocol family 16 Data read fault at 0x00000000 in Super Data (pc=0x8a6a) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<00008a6a>] via_flush_cache+0x12/0x2c SR: 2700 SP: 01c1fe3c a2: 01c24000 d0: 00001119 d1: 0000000c d2: 00012000 d3: 0000000f d4: 01c06840 d5: 00033b92 a0: 00000000 a1: 00000000 Process swapper (pid: 1, task=01c24000) Frame format=B ssw=0755 isc=0200 isb=fff7 daddr=00000000 dobuf=01c1fed0 baddr=00008a6e dibuf=0000004e ver=f Stack from 01c1fec4: 01c1fed0 00007d7e 00010080 01c1fedc 0000792e 00000001 01c1fef4 00006b40 01c80000 00040000 00000006 00000003 01c1ff1c 004a545e 004ff200 00040000 00000000 00000003 01c06840 00033b92 004a5410 004b6c88 01c1ff84 000021e2 00000073 00000003 01c06840 00033b92 0038507a 004bb094 004b6ca8 004b6c88 004b6ca4 004b6c88 000021ae 00020002 00000000 01c0685d 00000000 01c1ffb4 0049f938 00409c85 01c06840 0045bd40 00000073 00000002 00000002 00000000 Call Trace: [<00007d7e>] mac_cache_card_flush+0x12/0x1c [<00010080>] fix_dnrm+0x2/0x18 [<0000792e>] cache_push+0x46/0x5a [<00006b40>] arch_dma_prep_coherent+0x60/0x6e [<00040000>] switched_to_dl+0x76/0xd0 [<004a545e>] dma_atomic_pool_init+0x4e/0x188 [<00040000>] switched_to_dl+0x76/0xd0 [<00033b92>] parse_args+0x0/0x370 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<000021e2>] do_one_initcall+0x34/0x1be [<00033b92>] parse_args+0x0/0x370 [<0038507a>] strcpy+0x0/0x1e [<000021ae>] do_one_initcall+0x0/0x1be [<00020002>] do_proc_dointvec_conv+0x54/0x74 [<0049f938>] kernel_init_freeable+0x126/0x190 [<0049f94c>] kernel_init_freeable+0x13a/0x190 [<004a5410>] dma_atomic_pool_init+0x0/0x188 [<00041798>] complete+0x0/0x3c [<000b9b0c>] kfree+0x0/0x20a [<0038df98>] schedule+0x0/0xd0 [<0038d604>] kernel_init+0x0/0xda [<0038d610>] kernel_init+0xc/0xda [<0038d604>] kernel_init+0x0/0xda [<00002d38>] ret_from_kernel_thread+0xc/0x14 Code: 0000 2079 0048 10da 2279 0048 10c8 d3c8 <1011> 0200 fff7 1280 d1f9 0048 10c8 1010 0000 0008 1080 4e5e 4e75 4e56 0000 2039 Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Thanks to Stan Johnson for capturing the console log and running git bisect. Git bisect said commit 8e3a68fb55e0 ("dma-mapping: make dma_atomic_pool_init self-contained") is the first "bad" commit. I don't know why. Perhaps mach_l2_flush first became reachable with that commit. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Joshua Thompson <funaho@jurai.org> Link: https://lore.kernel.org/r/b8bbeef197d6b3898e82ed0d231ad08f575a4b34.1589949122.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-03-25m68k: mac: Convert to clocksource APIFinn Thain
Add a platform clocksource by adapting the existing arch_gettimeoffset implementation. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-03-25m68k: mac: Fix VIA timer counter accessesFinn Thain
This resolves some bugs that affect VIA timer counter accesses. Avoid lost interrupts caused by reading the counter low byte register. Make allowance for the fact that the counter will be decremented to 0xFFFF before being reloaded. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-03-25m68k: Call timer_interrupt() with interrupts disabledFinn Thain
Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.de Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/mac: Remove obsolete commentFinn Thain
According to The Guide To Mac Family Hardware, this is the correct way to disable the VBL interrupt. The confusing comment here doesn't add any value so remove it. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-01-21m68k/mac: Skip VIA port setup unless RTC is connectedFinn Thain
Those Mac models which don't connect their RTC to VIA1 port B probably have something else connected to those pins. Just leave them the way we found them. Make the port B setup conditional on via_type, to match the RTC accessors in arch/m68k/mac/misc.c. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-11-13Merge tag 'm68k-for-v4.15-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - more printk modernization - various cleanups and fixes (incl. a race condition) for Mac - defconfig updates * tag 'm68k-for-v4.15-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.14-rc7 m68k/mac: Add mutual exclusion for IOP interrupt polling m68k/mac: Disentangle VIA/RBV and NuBus initialization m68k/mac: Disentangle VIA and OSS initialization m68k/mac: More printk modernization
2017-11-09m68k/mac: Disentangle VIA/RBV and NuBus initializationFinn Thain
The Nubus subsystem should not be concerned with differences between VIA, RBV and OSS platforms. It should be portable across Macs and PowerMacs. This goal has implications for the initialization code relating to bus locking and slot interrupts. During Nubus initialization, bus transactions are "unlocked": on VIA2 and RBV machines, via_nubus_init() sets a bit in the via2[gBufB] register to allow bus-mastering Nubus cards to arbitrate for the bus. This happens upon subsys_initcall(nubus_init). But because nubus_init() has no effect on card state, this sequence is arbitrary. Moreover, when Penguin is used to boot Linux, the bus is already unlocked when Linux starts. On OSS machines there's no attempt to unlock Nubus transactions at all. (Maybe there's no benefit on that platform or maybe no-one knows how.) All of this demonstrates that there's no benefit in locking out bus-mastering cards, as yet. (If the need arises, we could lock the bus for the duration of a timing-critical operation.) NetBSD unlocks the Nubus early (at VIA initialization) and we can do the same. via_nubus_init() is also responsible for some VIA interrupt setup that should happen earlier than subsys_initcall(nubus_init). And actually, the Nubus subsystem need not be involved with slot interrupts: SLOT2IRQ works fine because Nubus slot IRQs are geographically assigned (regardless of platform). For certain platforms with PDS slots, some Nubus IRQs may be platform IRQs and this is not something that the NuBus subsystem should worry about. So let's invoke via_nubus_init() earlier and make the platform responsible for bus unlocking and interrupt setup instead of the NuBus subsystem. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-11-09m68k/mac: Disentangle VIA and OSS initializationFinn Thain
macintosh_config->via_type is meaningless on Mac IIfx (i.e. the only model with OSS chip), so skip the via_type switch statement. Call oss_init() before via_init() because it is more important and because that is the right place to initialize the oss_present flag. On this model, bringing forward oss_init() and delaying via_init() is no problem because those functions are independent. The only requirement here is that oss_register_interrupts() happens after via_init(). That is, mac_init_IRQ() happens after config_mac(). Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-11-09m68k/mac: More printk modernizationFinn Thain
Log message fragments used to be printed on one line but now get split up. Fix this. Also, suppress log spam that merely prints known pointer values. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09m68k/mac: Clean up interrupt debug macros and printk statementsFinn Thain
Mac interrupt code has been debugged. The Penguin deficiencies that still cause unhandled interrupts aren't fixable here. Besides, interrupts are fast and frequent and these printk statements were never really useful IMO. Remove them. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2016-02-29m68k: Fix misspellings in comments.Adam Buchbinder
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Acked-by: Greg Ungerer <gerg@uclinux.org> [nommu, coldfire] Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2013-11-26m68k: Remove superfluous inclusions of <asm/bootinfo.h>Geert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2012-12-24m68k: set arch_gettimeoffset directlyStephen Warren
remove m68k's mach_gettimeoffset function pointer, and instead directly set the arch_gettimeoffset function pointer. This requires multiplying all function results by 1000, since the removed m68k_gettimeoffset() did this. Also, s/unsigned long/u32/ just to make the function prototypes exactly match that of arch_gettimeoffset. Cc: Joshua Thompson <funaho@jurai.org> Cc: Sam Creasey <sammy@sammy.net> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Phil Blundell <philb@gnu.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2011-12-10m68k/mac: cleanup macro caseFinn Thain
Code style convention has macro names in uppercase. Change MAC_VIA_IIci to MAC_VIA_IICI. Also remove an obsolete comment. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10mac_scsi: fix mac_scsi on some powerbooksFinn Thain
Fix the mac_scsi interrupt edge trigger on non-RBV PowerBooks. This doesn't appear to help my PowerBook 520 but the NetBSD source reveals that the PowerBook 500 series is different than the others. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: fix nubus slot irq disable and shutdownFinn Thain
Improve NuBus slot interrupt handling code and documentation. This patch fixes the NuBus NIC (mac8390) in my Quadra 700. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: enable via_alt_mapping on performa 580Finn Thain
Enable via_alt_mapping on the Performa 588 and tidy up related documentation. I'm betting that remapped IRQs work just fine on the Performa 580 series since it works on the LC 630 and the logic board part numbers are reputedly the same. And the consensus seems to be that the Mac TV is essentially a Performa 550, not dissimilar to the Performa 520, so set the via_type accordingly. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup forward declarationsFinn Thain
Move some forward declarations into header files and adjust includes. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_irq_pendingFinn Thain
mac_irq_pending() has only one caller (mac_esp.c). Nothing tests for Baboon, PSC or OSS pending interrupts. Until that need arises, let's keep it simple and remove all the unused abstraction. Replace it with a routine to check for SCSI DRQ. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-12-10m68k/mac: cleanup mac_clear_irqFinn Thain
mac_clear_irq() is dead code and has been dead for as long as I can recall. On certain Mac models, certain irqs can't be cleared this way. Outside of irq dispatch, this code appears be unusable without busy loops or worse, and for irq dispatch we duplicate the same logic. Remove mac_clear_irq() and supporting code. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete m68k irq frameworkGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Optimize interrupts using chain handlersGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/mac: Convert Mac to genirqGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Remove obsolete IRQ_FLG_* usersGeert Uytterhoeven
The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-11-08m68k/irq: Rename {,__}m68k_handle_int()Geert Uytterhoeven
- Rename m68k_handle_int() to generic_handle_irq(), and drop the unneeded asmlinkage, - Rename __m68k_handle_int() to do_IRQ(). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2010-02-27mac68k: replace mac68k SCC code with platform deviceFinn Thain
Remove the old 68k Mac serial port code and a lot of related cruft. Add new SCC platform devices to mac 68k platform. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-03-26m68k: mac - Add SWIM floppy supportLaurent Vivier
It allows to read data from a floppy, but not to write to, and to eject the floppy (useful on our Mac without eject button). Signed-off-by: Laurent Vivier <Laurent@lvivier.info> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: mac core - Kill warn_unused_result warningsGeert Uytterhoeven
warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2009-01-12m68k: Kill several external declarations in source filesGeert Uytterhoeven
- Replace external declarations by proper includes where availiable. The accesses to some symbols had to be modified, as before they were declared using e.g. "extern int _end", while asm-generic/sections.h uses e.g. "extern char _end[]" - Remove unused or superfluous external declarations Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-12-28m68k: machw.h cleanupFinn Thain
Remove some more cruft from machw.h and drop the #include where it isn't needed. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-12-28m68k: Mac via cleanup and commentryFinn Thain
No behavioural changes, just cleanups and better documentation. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2008-08-05remove unneeded #include <linux/ide.h>'sAdrian Bunk
This patch remove unneeded #include <linux/ide.h>'s. It also adds a required #include <linux/interrupt.h> that was previously implicitely pulled by ide.h Signed-off-by: Adrian Bunk <bunk@kernel.org> [bart: revert change to tests/lkdtm.c (spotted by Stephen Rothwell)] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-20m68k/mac/: possible cleanupsAdrian Bunk
This patch contains the following possible cleanups: - make the following needlessly global code (always) static: - baboon.c: struct baboon - baboon.c: baboon_irq() - config.c: mac_orig_videoaddr - config.c: mac_identify() - config.c: mac_report_hardware() - config.c: mac_debug_console_write() - config.c: mac_sccb_console_write() - config.c: mac_scca_console_write() - config.c: mac_init_scc_port() - oss.c: oss_irq() - oss.c: oss_nubus_irq() - psc.c: psc_debug_dump() - psc.c: psc_dma_die_die_die() - via.c: rbv_clear - remove the unused bootparse.c - #if 0 the following unused functions: - config.c: mac_debugging_short() - config.c: mac_debugging_long() - remove the following unused code: - config.c: mac_bisize - config.c: mac_env - config.c: mac_SCC_init_done - config.c: mac_SCC_reset_done - config.c: mac_init_scca_port() - config.c: mac_init_sccb_port() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05m68k: kill arch/m68k/mac/mac_ksyms.cAdrian Bunk
EXPORT_SYMBOL's belong to the actual code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-20spelling fixes: arch/m68k/Simon Arlott
Spelling fixes in arch/m68k/. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-05-04m68k: Mac IRQ cleanupFinn Thain
There are no slow IRQs on Macs since Roman Zippel's IRQ reorganisation that went into 2.6.16 and removed mac_irq_list[] and the do_mac_irq_list() dispatcher. (They were implemented in do_mac_irq_list() by lowering the IPL.) Hence there's no more use for mutual exclusion in the Mac interrupt dispatchers. Remove it. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: Mac nubus IRQ fixes (plan E)Finn Thain
Some Macs lack a slot interrupt enable register. So the existing code makes disabled and unregistered slot IRQ lines outputs set high. This seems to work on quadras, but does not work on genuine VIAs (perhaps the card still succeeds in pulling the line low, or perhaps because this increases the settle time on the port A input, meaning that the CA1 IRQ could fire before the slot line reads active). Because of this, the nubus_active flags were used to mask IRQs, which is actually worse than the problem it tries to solve. Any interrupt masked by nubus_active will remain asserted and prevent further transitions on CA1. And so the nubus gets wedged regardless of hardware (emulated VIA ASIC, real VIA chip or RBV). The best solution to this hardware limitation of genuine VIAs is to disable the umbrella SLOTS IRQ when disabling a slot on those machines. Unfortunately, this means all slot IRQs get disabled when any slot IRQ is disabled. But it is only a problem when there's more than 1 device using nubus interrupts. Another potential problem for genuine VIAs is an unregistered nubus IRQ. Eventually it will be possible to enable the CA1 interrupt by installing its handler only _after_ all nubus drivers have loaded but _before_ the kernel needs them, at which time this last problem can be fixed. For now it can be worked around: - disable MacOS extensions - don't boot MacOS (use the Emile bootloader instead) - get the bootloaders to disable ROM drivers (Penguin does this for video cards already, don't know about Emile) - physically remove unsupported cards Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: Mac IRQ prepFinn Thain
Make sure that there are no slot IRQs asserted before leaving the nubus handler. If there are and we don't then the nubus gets wedged because this prevents a CA1 transition, which means no more nubus IRQs. Make the interrupt dispatch loops terminate sooner. Explicitly initialise the VIA latches to make the code more easily understood. Also some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: reverse Mac IRQ damageFinn Thain
Reverse the last of a monumental brown-paper-bag commit that went into the 2.3 kernel. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-04m68k: Mac interrupt prioritiesFinn Thain
Add some more machines that support A/UX interrupt priorities. There are probably others as well, but I've only tested these ones so far. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-10-09IRQ: Use the new typedef for interrupt handler function pointersDavid Howells
Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 09:47:04 +0000