summaryrefslogtreecommitdiff
path: root/arch/ia64/hp/sim
AgeCommit message (Collapse)Author
2012-03-28Disintegrate asm/system.h for IA64David Howells
Disintegrate asm/system.h for IA64. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Tony Luck <tony.luck@intel.com> cc: linux-ia64@vger.kernel.org
2012-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
2012-03-08TTY: simserial, final cleanupJiri Slaby
* remove pointless checks (tty cannot be NULL at that points) * fix some printks (use __func__, print text directly w/o using global strings) * remove some empty lines This is the last patch for simserial. Overall, the driver is 400 lines shorter. Being now at 560 lines. It was tested using ski with a busybox userspace. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, reindent some codeJiri Slaby
Make the code to conform to the standard. Also make it readable. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, fix includesJiri Slaby
Use headers from linux/* instead of asm/. Remove declaration of console_drivers, it's in linux/console.h already. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, remove useless commentsJiri Slaby
Or the obsolete ones like: "Let's have a little bit of fun" I have never had fun with software. For fun, one needs hard-ware. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, use tty_port_hangupJiri Slaby
Convert shutdown to be tty_port_operations->shutdown. Then we can use tty_port_hangup. (And we have to use tty_port_close.) This means we no longer touch ASYNC_INITIALIZED, TTY_IO_ERROR. Also we do not need to do any peculiar TTY logic in the file now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, use tty_port_openJiri Slaby
So now we convert startup to be ->activate of tty_port. This means we no longer care about INITIALIZED and TTY_IO_ERROR flags. After we have ->activate much of the code may go as it duplicates what tty_port_open does. In this case tty_port_open adds block_til_ready to the path. But we do not define carrier hooks, so it is a noop. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, properly refcount tty_port->ttyJiri Slaby
So that we will not be surprised in the ISR anymore. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, use tty_port_close_startJiri Slaby
I.e. remove more copied bloat. The only change is that we wait_until_sent now. Which is what we really should do. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, use tty_port_close_endJiri Slaby
The code is identical except locking. But added locks to protect counts do not hurt here. Rather the contrary. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, remove some tty opsJiri Slaby
All ->start, ->stop and ->wait_until_sent are empty and need not be defined. The time to remove them is now. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, define local tty_port pointerJiri Slaby
And use it to make the code more readable. Since tport doesn't conflict with port anymore and there are not many tport accessors left, do also s/\<tport\>/port/g. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial no longer needs serialPJiri Slaby
Let's do a spin-off of serial_state structure with only needed elements. And remove serialP crap from includes. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, stop using serial_state->{line,icount}Jiri Slaby
* instead of line, use tty->index or an iterator * icount is not made public, only the tx path increments it Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, remove tmp_bufJiri Slaby
It is totally unused. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, remove static initializationJiri Slaby
We do not use any of the preinitialized rs_state members for something real. So there is no need to initialize them. At the places we used them for printing, just print the values. And since only one port is supported, get rid of the loop. This simplifies simrs_init a heap. Thus we can handle fail paths in a standard way without panicing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: amiserial/simserial, use flags from tty_portJiri Slaby
This changes flags' type to ulong which is appropriate for all the set/clear_bits performed in the drivers.. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: amiserial/simserial, use count from tty_portJiri Slaby
Nothing special. Just remove count from serial_state and change all users to use tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: amiserial/simserial, use close delays from tty_portJiri Slaby
Note that previously simserial set the delay to 0. So we preserve that. BUT, is it correct? Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: amiserial/simserial, use tty_portJiri Slaby
Add tty_port to serial_state and start using common tty port members from tty_port in amiserial and simserial. The rest will follow one by one. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, pass tty down to functionsJiri Slaby
This avoids pain with tty refcounting and touching tty_port in the future. It allows us to remove some state->tty tests because the tty passed down to them can never be NULL. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: serialP, merge serial_state and async_structJiri Slaby
This is the final step to get rid of the one of the structures. A further cleanup will follow. And I struct serial_state deserves cease to exist after a switch to tty_port too. While changing the lines, it removes also pointless tty->driver_data casts. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, remove IRQ_TJiri Slaby
We do not set ASYNC_SHARE_IRQ anywhere. And since IRQF_DISABLED is a noop, pass zero to request_irq directly instead of this ugly macro. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, remove support of shared interruptsJiri Slaby
It never worked there. The ISR was never written for that kind of stuff. So remove all that crap with a hash of linked lists and pass the pointer directly to the ISR. BTW this answers the question there: * I don't know exactly why they don't use the dev_id opaque data * pointer instead of this extra lookup table -> Because they thought they will support more devices bound to a single interrupt w/o IRQF_SHARED. They would need exactly the hash there. What I don't understand is rebinding of the interrupt in the shutdown path. They perhaps meant to do just synchronize_irq? In any case, this is all gone and free_irq there properly. By removing the hash we save some bits (exactly NR_IRQS * 8 bytes of .bss and over a kilo of .text): before: text data bss dec hex filename 19600 320 8227 28147 6df3 ../a/ia64/arch/ia64/hp/sim/simserial.o after: text data bss dec hex filename 18568 320 28 18916 49e4 ../a/ia64/arch/ia64/hp/sim/simserial.o Note that a shared interrupt could not work too. request_irq requires data parameter to be non-NULL. So the whole IRQ_T exercise was pointless. Finally, this helps us remove another two members of async_struct :). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial/amiserial, use one instance of other membersJiri Slaby
This means: * close_delay * closing_wait * line * port * xmit_fifo_size This actually fixes a bug in amiserial. It initializes one and uses the other of the close delays. Yes, duplicating structure members is evil. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: simserial, use only one copy of async flagsJiri Slaby
The same as for amiserial. Use only one instance of the flags. Also remove them from async_struct now. Nobody else uses them. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08simserial, bail out when request_irq failsJiri Slaby
Without this, the code succeeds when the port is opened by root and we get unwanted interrupts storm on the first key stroke. Instead of that, tell the user we failed and that we won't continue. I suppose, the code was copied from the serial layer where we may want to change the irq number, so we must allow open even of the failing port. This is not the case for this driver at all. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08hpsim, initialize chip for assigned irqsJiri Slaby
Currently, when assign_irq_vector is called and the irq connected in the simulator, the irq is not ready. request_irq will return ENOSYS immediately. It is because the irq chip is unset. Hence set the chip properly to irq_type_hp_sim. And make sure this is done from both users of simulated interrupts. Also we have to set handler here, otherwise we end up in handle_bad_int resulting in spam in logs and no irqs handled. We use handle_simple_irq as these are SW interrupts that need no ACK or anything. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08simserial, include some headersJiri Slaby
And remove declarations which are already in the headers. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08hpsim, fix SAL handling in fw-emuJiri Slaby
The switch-cases of SAL_FREQ_BASE generate non-relocatable code. The same as for the ifs one level upper. This causes oopses early in boot because the kernel jumps to the hell instead of the offset in sal callback. So use ifs here for SAL_FREQ_BASE decision too. Isn't there any compiler directive or settings to solve that cleanly? Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: amiserial, remove tasklet for tty_wakeupJiri Slaby
tty_wakeup is safe to be called from all contexts. No need to schedule a tasklet for that. Let's call it directly like in other drivers. This allows us to kill another member of async_struct structure. (If we remove the dummy uses in simserial.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: serialP, remove unused materialJiri Slaby
First, remove unused macro and rs_multiport_struct structure. Nobody uses them at all. Further, the 2 drivers (they are below) which use the rest of structures from serialP.h (async_struct and serial_state) do not use all the members. Remove the members: * which are unused or * which are only initialized and never used for something real. Everybody should avoid the structures with a looong distance. Finally, remove the ALPHA kludge MCR quirks. They are 1:1 copy from 8250.h. No need to redefine them here. The 2 promised users of the structures: arch/ia64/hp/sim/simserial.c drivers/tty/amiserial.c Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove unneeded tty->index checksJiri Slaby
Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-08TTY: remove re-assignments to tty_driver membersJiri Slaby
All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24arch/ia64/hp/sim/simeth.c: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pm instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-29ia64: Convert to the new irq_* function namesThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29ia64: hp-sim: Cleanup direct access to irq_descThomas Gleixner
Use accessor functions instead of open coded access. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29ia64: Convert hp-sim to new irq_chip functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29ia64: Remove stale irq_chip.endThomas Gleixner
irq_chip.end got obsolete with the removal of __do_IRQ(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tony Luck <tony.luck@intel.com> LKML-Reference: <20110203004210.143127544@linutronix.de>
2011-02-22tty: simserial: now phase out the ioctl file pointer for goodLuck, Tony
Alan missed the ia64 simulator serial driver (because it was hidden in arch/... rather than located under drivers/... where one might expect to find a driver). Drop the "file *" argument from rs_ioctl() in arch/ia64/hp/sim/simserial.c Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-11-16SCSI host lock push-downJeff Garzik
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-22tty: icount changeover for other main devicesAlan Cox
Again basically cut and paste Convert the main driver set to use the hooks for GICOUNT Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-21Input: sysrq - drop tty argument form handle_sysrq()Dmitry Torokhov
Sysrq operations do not accept tty argument anymore so no need to pass it to us. [Stephen Rothwell <sfr@canb.auug.org.au>: fix build breakage in drm code caused by sysrq using bool but not including linux/types.h] [Sachin Sant <sachinp@in.ibm.com>: fix build breakage in s390 keyboadr driver] Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-07-05net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functionsPatrick McHardy
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-15[IA64] remove obsolete hw_interrupt_typeThomas Gleixner
The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users to struct irq_chip and remove the define. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-06-15[IA64] remove obsolete irq_desc_t typedefThomas Gleixner
The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup Convert the last remaining users and remove the typedef. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-06-15[IA64] remove obsolete no_irq_typeThomas Gleixner
The defines and typedefs (hw_interrupt_type, no_irq_type, irq_desc_t) have been kept around for migration reasons. After more than two years it's time to remove them finally. This patch cleans up one of the remaining users. When all such patches hit mainline we can remove the defines and typedefs finally. Impact: cleanup convert the last remaining users to no_irq_chip Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-04-28irq: change ->set_affinity() to return statusYinghai Lu
according to Ingo, change set_affinity() in irq_chip should return int, because that way we can handle failure cases in a much cleaner way, in the genirq layer. v2: fix two typos [ Impact: extend API ] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: linux-arch@vger.kernel.org LKML-Reference: <49F654E9.4070809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 12:15:55 +0000