summaryrefslogtreecommitdiff
path: root/arch/csky/Kconfig
AgeCommit message (Collapse)Author
2021-02-27csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, ↵Guo Ren
HAVE_GENERIC_VDSO It could help to reduce the latency of the time-related functions in user space. We have referenced arm's and riscv's implementation for the patch. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Vincent Chen <vincent.chen@sifive.com> Cc: Arnd Bergmann <arnd@arndb.de>
2021-01-12csky: Add kmemleak supportGuo Ren
Here is the log after enabled: [ 1.798972] kmemleak: Kernel memory leak detector initialized (mem pool available: 15851) [ 1.798983] kmemleak: Automatic memory scanning thread started Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2021-01-12csky: Cleanup asm/spinlock.hGuo Ren
There are two implementation of spinlock in arch/csky: - simple one (NR_CPU = 1,2) - tick's one (NR_CPU = 3,4) Remove the simple one. There is already smp_mb in spinlock, so remove the definition of smp_mb__after_spinlock. Link: https://lore.kernel.org/linux-csky/20200807081253.GD2674@hirez.programming.kicks-ass.net/#t Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Peter Zijlstra <peterz@infradead.org>k Cc: Arnd Bergmann <arnd@arndb.de>
2021-01-12csky: Fixup futex SMP implementationGuo Ren
Arnd said: I would guess that for csky, this is a mistake, as the architecture is fairly new and should be able to implement it. Guo reply: The c610, c807, c810 don't support SMP, so futex_cmpxchg_enabled = 1 with asm-generic's implementation. For c860, there is no HAVE_FUTEX_CMPXCHG and cmpxchg_inatomic/inuser implementation, so futex_cmpxchg_enabled = 0. Thx for point it out, we'll implement cmpxchg_inatomic/inuser for C860 and still use asm-generic for non-smp CPUs. LTP test: futex_wait01 1 TPASS : futex_wait(): errno=ETIMEDOUT(110): Connection timed out futex_wait01 2 TPASS : futex_wait(): errno=EAGAIN/EWOULDBLOCK(11): Resource temporarily unavailable futex_wait01 3 TPASS : futex_wait(): errno=ETIMEDOUT(110): Connection timed out futex_wait01 4 TPASS : futex_wait(): errno=EAGAIN/EWOULDBLOCK(11): Resource temporarily unavailable futex_wait02 1 TPASS : futex_wait() woken up futex_wait03 1 TPASS : futex_wait() woken up futex_wait04 1 TPASS : futex_wait() returned -1: errno=EAGAIN/EWOULDBLOCK(11): Resource temporarily unavailable Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/lkml/CAK8P3a3+WaQNyJ6Za2qfu6=0mBgU1hApnRXrdp1b1=P7wwyRUg@mail.gmail.com/
2021-01-12csky: Add memory layout 2.5G(user):1.5G(kernel)Guo Ren
There are two ways for translating va to pa for csky: - Use TLB(Translate Lookup Buffer) and PTW (Page Table Walk) - Use SSEG0/1 (Simple Segment Mapping) We use tlb mapping 0-2G and 3G-4G virtual address area and SSEG0/1 are for 2G-2.5G and 2.5G-3G translation. We could disable SSEG0 to use 2G-2.5G as TLB user mapping. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-11-06csky/mm/highmem: Switch to generic kmap atomicThomas Gleixner
No reason having the same code in every architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Guo Ren <guoren@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095857.681196473@linutronix.de
2020-10-30timekeeping: default GENERIC_CLOCKEVENTS to enabledArnd Bergmann
Almost all machines use GENERIC_CLOCKEVENTS, so it feels wrong to require each one to select that symbol manually. Instead, enable it whenever CONFIG_LEGACY_TIMER_TICK is disabled as a simplification. It should be possible to select both GENERIC_CLOCKEVENTS and LEGACY_TIMER_TICK from an architecture now and decide at runtime between the two. For the clockevents arch-support.txt file, this means that additional architectures are marked as TODO when they have at least one machine that still uses LEGACY_TIMER_TICK, rather than being marked 'ok' when at least one machine has been converted. This means that both m68k and arm (for riscpc) revert to TODO. At this point, we could just always enable CONFIG_GENERIC_CLOCKEVENTS rather than leaving it off when not needed. I built an m68k defconfig kernel (using gcc-10.1.0) and found that this would add around 5.5KB in kernel image size: text data bss dec hex filename 3861936 1092236 196656 5150828 4e986c obj-m68k/vmlinux-no-clockevent 3866201 1093832 196184 5156217 4ead79 obj-m68k/vmlinux-clockevent On Arm (MACH_RPC), that difference appears to be twice as large, around 11KB on top of an 6MB vmlinux. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-08seccomp: Move config option SECCOMP to arch/KconfigYiFei Zhu
In order to make adding configurable features into seccomp easier, it's better to have the options at one single location, considering especially that the bulk of seccomp code is arch-independent. An quick look also show that many SECCOMP descriptions are outdated; they talk about /proc rather than prctl. As a result of moving the config option and keeping it default on, architectures arm, arm64, csky, riscv, sh, and xtensa did not have SECCOMP on by default prior to this and SECCOMP will be default in this change. Architectures microblaze, mips, powerpc, s390, sh, and sparc have an outdated depend on PROC_FS and this dependency is removed in this change. Suggested-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/lkml/CAG48ez1YWz9cnp08UZgeieYRhHdqh-ch7aNwc4JRBnGyrmgfMg@mail.gmail.com/ Signed-off-by: YiFei Zhu <yifeifz2@illinois.edu> [kees: added HAVE_ARCH_SECCOMP help text, tweaked wording] Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/9ede6ef35c847e58d61e476c6a39540520066613.1600951211.git.yifeifz2@illinois.edu
2020-09-08uaccess: add infrastructure for kernel builds with set_fs()Christoph Hellwig
Add a CONFIG_SET_FS option that is selected by architecturess that implement set_fs, which is all of them initially. If the option is not set stubs for routines related to overriding the address space are provided so that architectures can start to opt out of providing set_fs. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-08-06Merge tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky updates from Guo Ren: "New features: - seccomp-filter - err-injection - top-down&random mmap-layout - irq_work - show_ipi - context-tracking Fixes & Optimizations: - kprobe_on_ftrace - optimize panic print" * tag 'csky-for-linus-5.9-rc1' of https://github.com/c-sky/csky-linux: csky: Add context tracking support csky: Add arch_show_interrupts for IPI interrupts csky: Add irq_work support csky: Fixup warning by EXPORT_SYMBOL(kmap) csky: Set CONFIG_NR_CPU 4 as default csky: Use top-down mmap layout csky: Optimize the trap processing flow csky: Add support for function error injection csky: Fixup kprobes handler couldn't change pc csky: Fixup duplicated restore sp in RESTORE_REGS_FTRACE csky: Add cpu feature register hint for smp csky: Add SECCOMP_FILTER supported csky: remove unusued thread_saved_pc and *_segments functions/macros
2020-08-01csky: Add context tracking supportGuo Ren
This patch support context tracking with no hz full. Here is the test result with dynticks-testing (see tick_stop): cat /sys/kernel/debug/tracing/per_cpu/cpu0/trace tracer: nop entries-in-buffer/entries-written: 356/356 #P:1 _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | ... sleep-192 [000] d.h. 167.088270: hrtimer_expire_entry: hrtimer=(ptrval) function=tick_sched_timer now=166436355700 sleep-192 [000] d.h. 167.092279: hrtimer_expire_entry: hrtimer=(ptrval) function=tick_sched_timer now=166440365700 <idle>-0 [000] d.h2 167.096492: hrtimer_expire_entry: hrtimer=(ptrval) function=tick_sched_timer now=166444578400 <idle>-0 [000] d..1 167.097876: tick_stop: success=1 dependency=NONE ^^^^^^^^^ <idle>-0 [000] d.h1 168.818206: hrtimer_expire_entry: hrtimer=(ptrval) function=tick_sched_timer now=168166280900 kworker/u2:0-7 [000] .... 168.821760: workqueue_execute_start: work struct (ptrval): function wb_workfn kworker/u2:0-7 [000] d.h1 168.824464: hrtimer_expire_entry: hrtimer=(ptrval) function=tick_sched_timer now=168172547100 kworker/0:1-18 [000] .... 168.825053: workqueue_execute_start: work struct (ptrval): function vmstat_update kworker/0:1-18 [000] .... 168.825238: workqueue_execute_start: work struct (ptrval): function vmstat_shepherd kworker/0:1-18 [000] .... 168.825516: workqueue_execute_start: work struct (ptrval): function neigh_periodic_work <idle>-0 [000] d..1 168.826121: tick_stop: success=1 dependency=NONE kworker/u2:0-7 [000] .... 169.377327: workqueue_execute_start: work struct (ptrval): function flush_to_ldisc <idle>-0 [000] d..1 169.379832: tick_stop: success=1 dependency=NONE kworker/u2:0-7 [000] .... 169.607935: workqueue_execute_start: work struct (ptrval): function flush_to_ldisc kworker/u2:0-7 [000] d.h1 169.608148: hrtimer_expire_entry: hrtimer=(ptrval) function=tick_sched_timer now=168956235500 <idle>-0 [000] d..1 169.608654: tick_stop: success=1 dependency=NONE Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Greentime Hu <greentime.hu@sifive.com> Cc: Arnd Bergmann <arnd@arndb.de>
2020-07-31csky: Set CONFIG_NR_CPU 4 as defaultGuo Ren
The C860 processors support 4 cores smp for maximum, so set NR_CPU to 4 as default Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de>
2020-07-31csky: Use top-down mmap layoutGuo Ren
Follow riscv mmap layout with commit "riscv: make mmap allocation top-down by default (54c95a11cc1b)". Before: cat /proc/self/maps 00008000-000dc000 r-xp 00000000 fe:00 17 /bin/busybox 000dc000-000dd000 r--p 000d3000 fe:00 17 /bin/busybox 000dd000-000de000 rw-p 000d4000 fe:00 17 /bin/busybox 2aaa8000-2aac6000 r-xp 00000000 fe:00 196 /lib/ld-2.28.9000.so 2aac6000-2aac7000 r-xp 00000000 00:00 0 [vdso] 2aac7000-2aac8000 r--p 0001e000 fe:00 196 /lib/ld-2.28.9000.so 2aac8000-2aac9000 rw-p 0001f000 fe:00 196 /lib/ld-2.28.9000.so 2aac9000-2aad9000 r-xp 00000000 fe:00 219 /lib/libresolv-2.28.9000.so 2aad9000-2aada000 r--p 0000f000 fe:00 219 /lib/libresolv-2.28.9000.so 2aada000-2aadb000 rw-p 00010000 fe:00 219 /lib/libresolv-2.28.9000.so 2aadb000-2aadd000 rw-p 00000000 00:00 0 2aadd000-2ac27000 r-xp 00000000 fe:00 203 /lib/libc-2.28.9000.so 2ac27000-2ac28000 ---p 0014a000 fe:00 203 /lib/libc-2.28.9000.so 2ac28000-2ac2a000 r--p 0014a000 fe:00 203 /lib/libc-2.28.9000.so 2ac2a000-2ac2b000 rw-p 0014c000 fe:00 203 /lib/libc-2.28.9000.so 2ac2b000-2ac2e000 rw-p 00000000 00:00 0 7fb99000-7fbba000 rwxp 00000000 00:00 0 [stack] After: cat /proc/self/maps 00008000-000dc000 r-xp 00000000 fe:00 17 /bin/busybox 000dc000-000dd000 r--p 000d3000 fe:00 17 /bin/busybox 000dd000-000de000 rw-p 000d4000 fe:00 17 /bin/busybox 77e13000-77f5d000 r-xp 00000000 fe:00 203 /lib/libc-2.28.9000.so 77f5d000-77f5e000 ---p 0014a000 fe:00 203 /lib/libc-2.28.9000.so 77f5e000-77f60000 r--p 0014a000 fe:00 203 /lib/libc-2.28.9000.so 77f60000-77f61000 rw-p 0014c000 fe:00 203 /lib/libc-2.28.9000.so 77f61000-77f66000 rw-p 00000000 00:00 0 77f66000-77f76000 r-xp 00000000 fe:00 219 /lib/libresolv-2.28.9000.so 77f76000-77f77000 r--p 0000f000 fe:00 219 /lib/libresolv-2.28.9000.so 77f77000-77f78000 rw-p 00010000 fe:00 219 /lib/libresolv-2.28.9000.so 77f78000-77f96000 r-xp 00000000 fe:00 196 /lib/ld-2.28.9000.so 77f96000-77f97000 r-xp 00000000 00:00 0 [vdso] 77f97000-77f98000 r--p 0001e000 fe:00 196 /lib/ld-2.28.9000.so 77f98000-77f99000 rw-p 0001f000 fe:00 196 /lib/ld-2.28.9000.so 7fd7b000-7fd9c000 rwxp 00000000 00:00 0 [stack] Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de>
2020-07-31csky: Add support for function error injectionGuo Ren
Inspired by the commit 42d038c4fb00 ("arm64: Add support for function error injection"), this patch supports function error injection for csky. This patch mainly support two functions: one is regs_set_return_value() which is used to overwrite the return value; the another function is override_function_with_return() which is to override the probed function returning and jump to its caller. Test log: cd /sys/kernel/debug/fail_function/ echo sys_clone > inject echo 100 > probability echo 1 > interval ls / [ 108.644163] FAULT_INJECTION: forcing a failure. [ 108.644163] name fail_function, interval 1, probability 100, space 0, times 1 [ 108.647799] CPU: 0 PID: 104 Comm: sh Not tainted 5.8.0-rc5+ #46 [ 108.648384] Call Trace: [ 108.649339] [<8005eed4>] walk_stackframe+0x0/0xf0 [ 108.649679] [<8005f16a>] show_stack+0x32/0x5c [ 108.649927] [<8040f9d2>] dump_stack+0x6e/0x9c [ 108.650271] [<80406f7e>] should_fail+0x15e/0x1ac [ 108.650720] [<80118ba8>] fei_kprobe_handler+0x28/0x5c [ 108.651519] [<80754110>] kprobe_breakpoint_handler+0x144/0x1cc [ 108.652289] [<8005d6da>] trap_c+0x8e/0x110 [ 108.652816] [<8005ce8c>] csky_trap+0x5c/0x70 -sh: can't fork: Invalid argument Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de>
2020-07-31csky: Add SECCOMP_FILTER supportedGuo Ren
secure_computing() is called first in syscall_trace_enter() so that a system call will be aborted quickly without doing succeeding syscall tracing if seccomp rules want to deny that system call. TODO: - Update https://github.com/seccomp/libseccomp csky support Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de>
2020-07-04arch: remove HAVE_COPY_THREAD_TLSChristian Brauner
All architectures support copy_thread_tls() now, so remove the legacy copy_thread() function and the HAVE_COPY_THREAD_TLS config option. Everyone uses the same process creation calling convention based on copy_thread_tls() and struct kernel_clone_args. This will make it easier to maintain the core process creation code under kernel/, simplifies the callpaths and makes the identical for all architectures. Cc: linux-arch@vger.kernel.org Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Greentime Hu <green.hu@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-05-13csky: Fixup calltrace panicGuo Ren
The implementation of show_stack will panic with wrong fp: addr = *fp++; because the fp isn't checked properly. The current implementations of show_stack, wchan and stack_trace haven't been designed properly, so just deprecate them. This patch is a reference to riscv's way, all codes are modified from arm's. The patch is passed with: - cat /proc/<pid>/stack - cat /proc/<pid>/wchan - echo c > /proc/sysrq-trigger Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-04-03csky: Add uprobes supportGuo Ren
This patch adds support for uprobes on csky architecture. Just like kprobe, it support single-step and simulate instructions. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-03csky: Add kprobes supportedGuo Ren
This patch enable kprobes, kretprobes, ftrace interface. It utilized software breakpoint and single step debug exceptions, instructions simulation on csky. We use USR_BKPT replace origin instruction, and the kprobe handler prepares an excutable memory slot for out-of-line execution with a copy of the original instruction being probed. Most of instructions could be executed by single-step, but some instructions need origin pc value to execute and we need software simulate these instructions. Signed-off-by: Guo Ren <guoren@linux.alibaba.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-04-02csky: Enable LOCKDEP_SUPPORTGuo Ren
Lockdep is needed by proving the spinlocks and rwlocks. Currently, we only put trace_hardirqs_on/off with csky_irq and ret_from_exception. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-04-01csky: Enable the gcov functionMa Jun
Support the gcov function in csky architecture. Signed-off-by: Ma Jun <majun258@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@kernel.org>
2020-03-08csky: Implement ftrace with regsGuo Ren
This patch implements FTRACE_WITH_REGS for csky, which allows a traced function's arguments (and some other registers) to be captured into a struct pt_regs, allowing these to be inspected and/or modified. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-03-08csky: Add support for restartable sequenceGuo Ren
Copied and adapted from vincent's patch, but modified for csky. ref: https://lore.kernel.org/linux-riscv/1572919114-3886-3-git-send-email-vincent.chen@sifive.com/raw Add calls to rseq_signal_deliver(), rseq_handle_notify_resume() and rseq_syscall() to introduce RSEQ support. 1. Call the rseq_handle_notify_resume() function on return to userspace if TIF_NOTIFY_RESUME thread flag is set. 2. Call the rseq_signal_deliver() function to fixup on the pre-signal frame when a signal is delivered on top of a restartable sequence critical section. 3. Check that system calls are not invoked from within rseq critical sections by invoking rseq_signal() from ret_from_syscall(). With CONFIG_DEBUG_RSEQ, such behavior results in termination of the process with SIGSEGV. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-03-08csky: Implement ptrace regs and stack APIGuo Ren
Needed for kprobes support. Copied and adapted from Patrick's patch, but it has been modified for csky's pt_regs. ref: https://lore.kernel.org/linux-riscv/1572919114-3886-2-git-send-email-vincent.chen@sifive.com/raw Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Patrick Staehlin <me@packi.ch>
2020-02-21csky: Implement copy_thread_tlsGuo Ren
This is required for clone3 which passes the TLS value through a struct rather than a register. Cc: Amanieu d'Antras <amanieu@gmail.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Add PCI supportMaJun
Add the pci related code for csky arch to support basic pci virtual function, such as qemu virt-pci-9pfs. Signed-off-by: MaJun <majun258@linux.alibaba.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Cleanup old Kconfig optionsKrzysztof Kozlowski
CONFIG_CLKSRC_OF is gone since commit bb0eb050a577 ("clocksource/drivers: Rename CLKSRC_OF to TIMER_OF"). The platform already selects TIMER_OF. CONFIG_HAVE_DMA_API_DEBUG is gone since commit 6e88628d03dd ("dma-debug: remove CONFIG_HAVE_DMA_API_DEBUG"). CONFIG_DEFAULT_DEADLINE is gone since commit f382fb0bcef4 ("block: remove legacy IO schedulers"). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21arch/csky: fix some Kconfig typosRandy Dunlap
Fix wording in help text for the CPU_HAS_LDSTEX symbol. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guo Ren <guoren@kernel.org> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Support icache flush without specific instructionsGuo Ren
Some CPUs don't support icache specific instructions to flush icache lines in broadcast way. We use cpu control registers to flush local icache and use IPI to notify other cores. Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky/Kconfig: Add Kconfig.platforms to support some driversGuo Ren
Such as snps,dw-apb-ictl Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Separate fixaddr_init from highmemGuo Ren
After fixaddr_init is separated from highmem, we could use tcm without highmem selected. (610 (abiv1) don't support highmem, but it could use tcm now.) Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Tightly-Coupled Memory or Sram supportGuo Ren
The implementation are not only used by TCM but also used by sram on SOC bus. It follow existed linux tcm software interface, so that old tcm application codes could be re-used directly. Software interface list in asm/tcm.h: - Variables/Const: __tcmdata, __tcmconst - Functions: __tcmfunc, __tcmlocalfunc - Malloc/Free: tcm_alloc, tcm_free In linux menuconfig: - Choose a TCM contain instrctions + data or separated in ITCM/DTCM. - Determine TCM_BASE (DTCM_BASE) in phyiscal address. - Determine size of TCM or ITCM(DTCM) in page counts. Here is hello tcm example from Documentation/arm/tcm.rst which could be directly used: /* Uninitialized data */ static u32 __tcmdata tcmvar; /* Initialized data */ static u32 __tcmdata tcmassigned = 0x2BADBABEU; /* Constant */ static const u32 __tcmconst tcmconst = 0xCAFEBABEU; static void __tcmlocalfunc tcm_to_tcm(void) { int i; for (i = 0; i < 100; i++) tcmvar ++; } static void __tcmfunc hello_tcm(void) { /* Some abstract code that runs in ITCM */ int i; for (i = 0; i < 100; i++) { tcmvar ++; } tcm_to_tcm(); } static void __init test_tcm(void) { u32 *tcmem; int i; hello_tcm(); printk("Hello TCM executed from ITCM RAM\n"); printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar); tcmvar = 0xDEADBEEFU; printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar); printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned); printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst); /* Allocate some TCM memory from the pool */ tcmem = tcm_alloc(20); if (tcmem) { printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem); tcmem[0] = 0xDEADBEEFU; tcmem[1] = 0x2BADBABEU; tcmem[2] = 0xCAFEBABEU; tcmem[3] = 0xDEADBEEFU; tcmem[4] = 0x2BADBABEU; for (i = 0; i < 5; i++) printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]); tcm_free(tcmem, 20); } } TODO: - Separate fixup mapping from highmem - Support abiv1 Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2020-02-21csky: Initial stack protector supportMao Han
This is a basic -fstack-protector support without per-task canary switching. The protector will report something like when stack corruption is detected: It's tested with strcpy local array overflow in sys_kill and get: stack-protector: Kernel stack is corrupted in: sys_kill+0x23c/0x23c TODO: - Support task switch for different cannary Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
2019-11-12csky: use generic ioremapChristoph Hellwig
Use the generic ioremap_prot and iounmap helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Guo Ren <guoren@kernel.org>
2019-07-19csky: Select intc & timer driversGuo Ren
Let arch help to select interrupt controller's and timer's drivers instead of people using menuconfig to select. This help the mini system boot up. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Arnd Bergmann <arnd@arndb.de>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-09Merge tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - remove the already broken support for NULL dev arguments to the DMA API calls - Kconfig tidyups * tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence dma-mapping: remove an unnecessary NULL check x86/dma: Remove the x86_dma_fallback_dev hack dma-mapping: remove leftover NULL device support arm: use a dummy struct device for ISA DMA use of the DMA API pxa3xx-gcu: pass struct device to dma_mmap_coherent gbefb: switch to managed version of the DMA allocator da8xx-fb: pass struct device to DMA API functions parport_ip32: pass struct device to DMA API functions dma: select GENERIC_ALLOCATOR for DMA_REMAP
2019-05-08Merge tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky updates from Guo Ren: - Fixup vdsp&fpu issues in kernel - Add dynamic function tracer - Use in_syscall & forget_syscall instead of r11_sig - Reconstruct signal processing - Support dynamic start physical address - Fixup wrong update_mmu_cache implementation - Support vmlinux bootup with MMU off - Use va_pa_offset instead of phys_offset - Fixup syscall_trace return processing flow - Add perf callchain support - Add perf_arch_fetch_caller_regs support - Add page fault perf event support - Add support for perf registers sampling * tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linux: csky/syscall_trace: Fixup return processing flow csky: Fixup compile warning csky: Add support for perf registers sampling csky: add page fault perf event support csky: Use va_pa_offset instead of phys_offset csky: Support vmlinux bootup with MMU off csky: Add perf_arch_fetch_caller_regs support csky: Fixup wrong update_mmu_cache implementation csky: Support dynamic start physical address csky: Reconstruct signal processing csky: Use in_syscall & forget_syscall instead of r11_sig csky: Add non-uapi asm/ptrace.h namespace csky: mm/fault.c: Remove duplicate header csky: remove redundant generic-y csky: Update syscall_trace_enter/exit implementation csky: Add perf callchain support csky/ftrace: Add dynamic function tracer (include graph tracer) csky: Fixup vdsp&fpu issues in kernel
2019-05-06dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presenceChristoph Hellwig
Add a Kconfig symbol that indicates an architecture provides a arch_dma_prep_coherent implementation, and provide a stub otherwise. This will allow the generic dma-iommu code to use it while still allowing to be built for cache coherent architectures. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2019-04-22csky: Add support for perf registers samplingMao Han
This patch implements the perf registers sampling and validation API for csky arch. The valid registers and their register ID are defined in perf_regs.h. Perf tool can backtrace in userspace with unwind library and the registers/user stack dump support. Signed-off-by: Mao Han <han_mao@c-sky.com> Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-04-22csky: Update syscall_trace_enter/exit implementationGuo Ren
Previous syscall_trace implementation couldn't support AUDITSYSCALL and SYSCALL_TRACEPOINTS. Now we redesign it to support audit_syscall and syscall_tracepoints just like other archs'. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Cc: Dmitry V. Levin <ldv@altlinux.org> Cc: Arnd Bergmann <arnd@arndb.de>
2019-04-22csky/ftrace: Add dynamic function tracer (include graph tracer)Guo Ren
Support dynamic ftrace including dynamic graph tracer. Gcc-csky with -pg will produce call site in every function prologue and we can use these call site to hook trace function. gcc with -pg origin call site: push lr jbsr _mcount nop32 nop32 If the (callee - caller)'s offset is in range of bsr instruction, we'll modify code with: push lr bsr _mcount nop32 nop32 Else if the (callee - caller)'s offset is out of bsr instrunction, we'll modify code with: push lr movih r26, ... ori r26, ... jsr r26 (r26 is reserved for jsr link reg in csky abiv2 spec.) Signed-off-by: Guo Ren <ren_guo@c-sky.com>
2019-04-03locking/rwsem: Remove rwsem-spinlock.c & use rwsem-xadd.c for all archsWaiman Long
Currently, we have two different implementation of rwsem: 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c) 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c) As we are going to use a single generic implementation for rwsem-xadd.c and no architecture-specific code will be needed, there is no point in keeping two different implementations of rwsem. In most cases, the performance of rwsem-spinlock.c will be worse. It also doesn't get all the performance tuning and optimizations that had been implemented in rwsem-xadd.c over the years. For simplication, we are going to remove rwsem-spinlock.c and make all architectures use a single implementation of rwsem - rwsem-xadd.c. All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM in the code are removed. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-riscv@lists.infradead.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linuxppc-dev@lists.ozlabs.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: uclinux-h8-devel@lists.sourceforge.jp Link: https://lkml.kernel.org/r/20190322143008.21313-3-longman@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-03-10Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...
2019-02-20dma-mapping: improve selection of dma_declare_coherent availabilityChristoph Hellwig
This API is primarily used through DT entries, but two architectures and two drivers call it directly. So instead of selecting the config symbol for random architectures pull it in implicitly for the actual users. Also rename the Kconfig option to describe the feature better. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS Acked-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-1932-bit userspace ABI: introduce ARCH_32BIT_OFF_T config optionYury Norov
All new 32-bit architectures should have 64-bit userspace off_t type, but existing architectures has 32-bit ones. To enforce the rule, new config option is added to arch/Kconfig that defaults ARCH_32BIT_OFF_T to be disabled for new 32-bit architectures. All existing 32-bit architectures enable it explicitly. New option affects force_o_largefile() behaviour. Namely, if userspace off_t is 64-bits long, we have no reason to reject user to open big files. Note that even if architectures has only 64-bit off_t in the kernel (arc, c6x, h8300, hexagon, nios2, openrisc, and unicore32), a libc may use 32-bit off_t, and therefore want to limit the file size to 4GB unless specified differently in the open flags. Signed-off-by: Yury Norov <ynorov@caviumnetworks.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Yury Norov <ynorov@marvell.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-02-13of: select OF_RESERVED_MEM automaticallyChristoph Hellwig
The OF_RESERVED_MEM can be used if we have either CMA or the generic declare coherent code built and we support the early flattened DT. So don't bother making it a user visible options that is selected by most configs that fit the above category, but just select it when the requirements are met. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rob Herring <robh@kernel.org>
2019-01-05Merge tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linuxLinus Torvalds
Pull arch/csky updates from Guo Ren: "Here are three main features (cpu_hotplug, basic ftrace, basic perf) and some bugfixes: Features: - Add CPU-hotplug support for SMP - Add ftrace with function trace and function graph trace - Add Perf support - Add EM_CSKY_OLD 39 - optimize kernel panic print. - remove syscall_exit_work Bugfixes: - fix abiv2 mmap(... O_SYNC) failure - fix gdb coredump error - remove vdsp implement for kernel - fix qemu failure to bootup sometimes - fix ftrace call-graph panic - fix device tree node reference leak - remove meaningless header-y - fix save hi,lo,dspcr regs in switch_stack - remove unused members in processor.h" * tag 'csky-for-linus-4.21' of git://github.com/c-sky/csky-linux: csky: Add perf support for C-SKY csky: Add EM_CSKY_OLD 39 clocksource/drivers/c-sky: fixup ftrace call-graph panic csky: ftrace call graph supported. csky: basic ftrace supported csky: remove unused members in processor.h csky: optimize kernel panic print. csky: stacktrace supported. csky: CPU-hotplug supported for SMP clocksource/drivers/c-sky: fixup qemu fail to bootup sometimes. csky: fixup save hi,lo,dspcr regs in switch_stack. csky: remove syscall_exit_work csky: fixup remove vdsp implement for kernel. csky: bugfix gdb coredump error. csky: fixup abiv2 mmap(... O_SYNC) failed. csky: define syscall_get_arch() elf-em.h: add EM_CSKY csky: remove meaningless header-y csky: Don't leak device tree node reference
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 11:50:33 +0000