summaryrefslogtreecommitdiff
path: root/arch/blackfin
AgeCommit message (Collapse)Author
2009-06-16Merge branch 'akpm'Linus Torvalds
* akpm: (182 commits) fbdev: bf54x-lq043fb: use kzalloc over kmalloc/memset fbdev: *bfin*: fix __dev{init,exit} markings fbdev: *bfin*: drop unnecessary calls to memset fbdev: bfin-t350mcqb-fb: drop unused local variables fbdev: blackfin has __raw I/O accessors, so use them in fb.h fbdev: s1d13xxxfb: add accelerated bitblt functions tcx: use standard fields for framebuffer physical address and length fbdev: add support for handoff from firmware to hw framebuffers intelfb: fix a bug when changing video timing fbdev: use framebuffer_release() for freeing fb_info structures radeon: P2G2CLK_ALWAYS_ONb tested twice, should 2nd be P2G2CLK_DAC_ALWAYS_ONb? s3c-fb: CPUFREQ frequency scaling support s3c-fb: fix resource releasing on error during probing carminefb: fix possible access beyond end of carmine_modedb[] acornfb: remove fb_mmap function mb862xxfb: use CONFIG_OF instead of CONFIG_PPC_OF mb862xxfb: restrict compliation of platform driver to PPC Samsung SoC Framebuffer driver: add Alpha Channel support atmel-lcdc: fix pixclock upper bound detection offb: use framebuffer_alloc() to allocate fb_info struct ... Manually fix up conflicts due to kmemcheck in mm/slab.c
2009-06-16kmap_types: make most arches use generic header fileRandy Dunlap
Convert most arches to use asm-generic/kmap_types.h. Move the KM_FENCE_ macro additions into asm-generic/kmap_types.h, controlled by __WITH_KM_FENCE from each arch's kmap_types.h file. Would be nice to be able to add custom KM_types per arch, but I don't yet see a nice, clean way to do that. Built on x86_64, i386, mips, sparc, alpha(tonyb), powerpc(tonyb), and 68k(tonyb). Note: avr32 should be able to remove KM_PTE2 (since it's not used) and then just use the generic kmap_types.h file. Get avr32 maintainer approval. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Bryan Wu <cooloney@kernel.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: "Luck Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16mm: consolidate init_mm definitionAlexey Dobriyan
* create mm/init-mm.c, move init_mm there * remove INIT_MM, initialize init_mm with C99 initializer * unexport init_mm on all arches: init_mm is already unexported on x86. One strange place is some OMAP driver (drivers/video/omap/) which won't build modular, but it's already wants get_vm_area() export. Somebody should look there. [akpm@linux-foundation.org: add missing #includes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Americo Wang <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (27 commits) Blackfin: hook up new rt_tgsigqueueinfo syscall Blackfin: improve CLKIN_HZ config default Blackfin: initial support for ftrace grapher Blackfin: initial support for ftrace Blackfin: enable support for LOCKDEP Blackfin: add preliminary support for STACKTRACE Blackfin: move custom sections into sections.h Blackfin: punt unused/wrong mutex-dec.h Blackfin: add support for irqflags Blackfin: add support for bzip2/lzma compressed kernel images Blackfin: convert Kconfig style to def_bool Blackfin: bf548-ezkit: update smsc911x resources Blackfin: update aedos-ipipe code to upstream 1.10-00 Blackfin: bf537-stamp: update ADP5520 resources Blackfin: bf518f-ezbrd: fix SPI CS for SPI flash Blackfin: define SPI IRQ in board resources Blackfin: do not configure the UART early if on wrong processor Blackfin: fix deadlock in SMP IPI handler Blackfin: fix flag storage for irq funcs Blackfin: push down exception oops checking ...
2009-06-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (31 commits) trivial: remove the trivial patch monkey's name from SubmittingPatches trivial: Fix a typo in comment of addrconf_dad_start() trivial: usb: fix missing space typo in doc trivial: pci hotplug: adding __init/__exit macros to sgi_hotplug trivial: Remove the hyphen from git commands trivial: fix ETIMEOUT -> ETIMEDOUT typos trivial: Kconfig: .ko is normally not included in module names trivial: SubmittingPatches: fix typo trivial: Documentation/dell_rbu.txt: fix typos trivial: Fix Pavel's address in MAINTAINERS trivial: ftrace:fix description of trace directory trivial: unnecessary (void*) cast removal in sound/oss/msnd.c trivial: input/misc: Fix typo in Kconfig trivial: fix grammo in bus_for_each_dev() kerneldoc trivial: rbtree.txt: fix rb_entry() parameters in sample code trivial: spelling fix in ppc code comments trivial: fix typo in bio_alloc kernel doc trivial: Documentation/rbtree.txt: cleanup kerneldoc of rbtree.txt trivial: Miscellaneous documentation typo fixes trivial: fix typo milisecond/millisecond for documentation and source comments. ...
2009-06-13Blackfin: hook up new rt_tgsigqueueinfo syscallMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: improve CLKIN_HZ config defaultMike Frysinger
Most boards use 25000000 as the default HZ, so rather than add a whole bunch more boards, make it the default for everyone. This also fixes randconfig builds as there was no default before. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: initial support for ftrace grapherMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: initial support for ftraceMike Frysinger
Just the basic ftrace support here -- mcount and the ftrace stub. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: enable support for LOCKDEPMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add preliminary support for STACKTRACEMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: move custom sections into sections.hMike Frysinger
The Blackfin arch has a bunch of custom section markings for its on-chip regions, but they aren't declared in the right header. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: punt unused/wrong mutex-dec.hMike Frysinger
Looks like the mutex-dec.h header file was incorrectly copied into the Blackfin asm path. Nothing uses it, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add support for irqflagsMike Frysinger
This converts the irq handling in the Blackfin arch from the old irq.h / system.h method to the new irqflags.h. A stepping stone on the way to other tracing functionality. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add support for bzip2/lzma compressed kernel imagesMike Frysinger
Since U-Boot can support these compression types, add appropriate targets to the Blackfin boot files. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: convert Kconfig style to def_boolMike Frysinger
Makes the file easier to read when there isn't so much clutter. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: bf548-ezkit: update smsc911x resourcesMike Frysinger
The older smsc911x driver made platform data optional, but the newer one always requires it, so add proper settings to the BF548-EZKIT. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: update aedos-ipipe code to upstream 1.10-00Yi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: bf537-stamp: update ADP5520 resourcesMike Frysinger
The ADP5520 hooks up to PF7 rather than PG0. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: bf518f-ezbrd: fix SPI CS for SPI flashGraf Yang
The SPI flash on the BF518F-EZBRD board is actually hooked up to CS2, not CS1, so make sure the resources are correct. URL: http://blackfin.uclinux.org/gf/tracker/5220 Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: define SPI IRQ in board resourcesYi Li
The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: do not configure the UART early if on wrong processorRobin Getz
Before we configure the early UART, check to make sure we are running on the expected processor - otherwise, we cause problems by configuring pins that don't exist (and causing an infinite loop of faults). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: fix deadlock in SMP IPI handlerSonic Zhang
When a low priority interrupt (like ethernet) is triggered between 2 high priority IPI messages, a deadlock in disable_irq() is hit by the second IPI handler. This is because the second IPI message is queued within the first IPI handler, but the handler doesn't process all messages, and new ones are inserted rather than appended. So now we process all the pending messages, and append new ones to the pending list. URL: http://blackfin.uclinux.org/gf/tracker/5226 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: fix flag storage for irq funcsMike Frysinger
The IRQ functions take an "unsigned long" flags variable, not any other type, so fix the places where we use "int" or "long". Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: push down exception oops checkingMike Frysinger
Rather than maintain a duplicate list of valid exceptions we can take in the kernel both in the first if() check and the switch() check, delay the oops check to after the switch(). All valid exceptions will have returned by this point leaving only the invalid ones. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: fix trap_c() exit pathsMike Frysinger
The trap_c() code pushes the hardware trace status onto the stack, but doesn't always restore it when returning from some trap code paths. So unify the exit code paths to all head to the end of the function. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add blackfin_invalidate_entire_icache for SMP systemsSonic Zhang
The KGDB code uses this when switching processors to make sure the icache is in a valid state. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: include the cpu compiled version in /proc/cpuinfoRobin Getz
Since the compiled-for cpu revision can be significant, include it in the cpuinfo output along side the cpu revision we're currently running on. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: add support for GENERIC_BUGMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: rename bfin_addr_dcachable to bfin_addr_dcacheableJie Zhang
The latter naming convention is much more common. Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: export ip_compute_csum/csum_partial_copy_from_user symbolsMike Frysinger
All other arches do this, and some places like the net/scsi code will fail as modules without them. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-13Blackfin: only handle CPLB protection violations when MPU is enabledRobin Getz
We don't need to handle CPLB protection violations unless we are running with the MPU on. Fix the entry code to call common trap_c, and remove the code which is never run. This allows the traps test suite to run on older boards with the MPU disabled. URL: http://blackfin.uclinux.org/gf/tracker/5129 Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: add generic lib/checksum.c asm-generic: add a generic uaccess.h asm-generic: add generic NOMMU versions of some headers asm-generic: add generic atomic.h and io.h asm-generic: add legacy I/O header files asm-generic: add generic versions of common headers asm-generic: make bitops.h usable asm-generic: make pci.h usable directly asm-generic: make get_rtc_time overridable asm-generic: rename page.h and uaccess.h asm-generic: rename atomic.h to atomic-long.h asm-generic: add a generic unistd.h asm-generic: add generic ABI headers asm-generic: add generic sysv ipc headers asm-generic: introduce asm/bitsperlong.h asm-generic: rename termios.h, signal.h and mman.h
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12Blackfin: fix sparseirq/kstat_irqs falloutMike Frysinger
The sparseirq changes (d7e51e66) played poorly with the Blackfin irqchip implementation as we're still using the old hardirq method. Our bad irq structure had a NULL kstat_irqs field so when all the common code tries to increment this field, everything goes big bada boom. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix unused warnings after nommu updateMike Frysinger
The massive nommu update (8feae131) left the local variable "vml" unused, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: export the last exception cause via debugfsRobin Getz
We have some test code that runs in userspace that exercises the exception handling of the Blackfin pretty thoroughly. Part of the validation process is checking the exact exception triggered, so export the last one seen to userspace via debugfs when debugging is enabled for the test code to check. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: fix length checking in kgdb_ebin2memRoel Kluin
The kgdb_ebin2mem() was decrementing the count variable to do parsing, but then later still tries to use it based on its original meaning. So leave it untouched and use a different variable to walk the memory. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: kgdb: fix up error return valuesMike Frysinger
The Blackfin kgdb code was all passing back positive errno values when it really should have been using negative errno values. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: push access_ok() L1 attribute downMike Frysinger
There is no need for the L1 attribute to be on the prototype of the access_ok() function as all consumers of the function do not care where it lives -- they'll always use pcrel calls to get to it. This prevents pointless recompiles of most of the system when this config option changes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: punt duplicated search_exception_table() prototypeMike Frysinger
The common code already has a prototype for this function and we don't use it anywhere in the Blackfin code, so punt it from the Blackfin headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add missing access_ok() checks to user functionsRobin Getz
The core string/clear user functions weren't checking the user pointers which caused kernel crashes with some bad programs and tests (like LTP). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: convert early_printk EVT init to a loopMike Frysinger
The EVT registers are all contiguous in the memory map, so using a loop to initialize them all rather than hardcoding the list results in much better generated code (a hardware loop rather than a whole bunch of individual loads). Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: document the lsl variants of the L1 allocatorMike Frysinger
Make sure the meaning of "lsl" is covered somewhere and it is clear why we somewhat duplicate the sram alloc/free functions. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: rename Blackfin relocs according to the toolchainMike Frysinger
The latest Blackfin toolchain has fixed its relocation scheme to match other ports: always use R_BFIN_ prefix and capitalize everything. This brings the kernel in line with those fixes. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: check SIC defines rather than variant namesMike Frysinger
Rather than having to maintain a hard coded list of Blackfin variants, use the SIC defines themselves. This fixes build problems on BF51x/BF538 under some configurations as they were missing from one of the lists. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: add SSYNC to set_dma_sg() for descriptor fetchingSonic Zhang
Make sure the internal core buffers are flushed before telling the DMA engine to fetch the descriptor structure so that it gets the right values. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: convert SMP to only use generic time frameworkGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346Michael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-12Blackfin: override default uClinux MTD addr/sizeMike Frysinger
Due to a processor anomaly (05000263 to be exact), most Blackfin parts cannot keep the embedded filesystem image directly after the kernel in RAM. Instead, the filesystem needs to be relocated to the end of memory. As such, we need to tweak the map addr/size during boot for Blackfin systems. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 00:22:34 +0000