summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-common/ints-priority.c
AgeCommit message (Collapse)Author
2013-02-20blackfin: pm: fix build errorSteven Miao
Only register pm ops when defined CONFIG_PM. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-12-14blackfin: SEC: clean up SEC interrupt initializationSonic Zhang
Append the SEC IRQ after the IVG6, which is consistent to BF5xx SIC. Exclude SIC irqchip fucntions from SEC code. Call handle_fasteoi_irq in SEC error and fault handler. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-10-08Blackfin: drop irq enable in init_arch_irq()Steven Miao
Kernel common code will enable irq, drop it in init_arch_irq(). Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: fix build warningBob Liu
Fix several build warning while using bf609-ezkit_defconfig. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: Add double fault, hardware error and NMI SEC handlerSonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: sec: Enable sec interrupt source priority configuration.Sonic Zhang
Customize the SEC interrupt priority array in machine ints-priority.c. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: sec: Clean up interrupt initialization code for SEC.Sonic Zhang
Turn SEC related macro CONFIG_BF60x into SEC_GCTL. Move machine specific GPIO_PINT macros to machine gpio header. Split SEC init_arch_irq() and vec_to_irq() from old SIC. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24cleanup: sec and linkport only built on bf60xSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24bf60x: pm: add pint suspend and resume supportSteven Miao
save and restore pint sec CTL save and restore pint registers add pint suspend and resume when suspend to mem Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24blackfin: mach-common: ints-priority add irq_set_wakeBob Liu
Add irq_set_wake to bfin_sec_irqchip, drivers like stmmac need it. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-07-24irq: set cgu event handle to fasteoi handleSteven Miao
Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: bf60x: add wakeup source selectSteven Miao
Support select the wakeup source for power management on bf60x. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: mach-common: ints-priority: fix compile errorBob Liu
IRQ_PINT4/PINT5 are not defined on !CONFIG_BF60x, this patch fix it. Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-05-21blackfin: mach-common: add sec support for bf60xSteven Miao
Add system event controller support for bf60x so that interrupt can be handled. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Bob Liu <lliubbo@gmail.com>
2011-07-23Blackfin: gpio/ints: generalize pint logicMike Frysinger
Have the logic that uses peripheral interrupt blocks key off of pint defines rather than CPU names so that things are generalized across families. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: bf54x: switch to common pint MMR structMike Frysinger
We have a struct in the headers describing the register layout, so drop the local duplicate one. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-23Blackfin: bf54x: constify pint register arrayMike Frysinger
The array of pointers to register blocks never changes, so constify it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf537: demux port H mask A and emac rx intsMike Frysinger
The BF537 SIC combines the gpio port H mask A interrupts with the emac rx interrupt, so we need to demux this in software. It also combines the gpio port H mask B and the emac tx interrupts, and the watchdog and port F mask B interrupts, but since we don't support mask B yet, just add the defines for now. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf537: fix excessive gpio int demuxingMike Frysinger
The search logic in the gpio demux walks all possible gpio blocks starting at the specified pin. The trouble on bf537 parts when we demux the port F and port G mask A interrupts is that we also demux port H mask A ints. Most of the time this isn't an issue as people don't usually use port H, but might as well avoid it when possible. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: bf54x: drop unused pm gpio handlingMike Frysinger
This functionality was merged into the common bfin_pm_standby_ctrl func some time ago, so punt these now unused funcs and data, and localize the wake funcs that aren't needed externally anymore. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: move bf537-specific irq code out of common codeMike Frysinger
The SIC interrupt line muxing that the bf537 does is specific to this CPU (thankfully), so rip it out of the common code and move it to a bf537-specific file. This tidies up the common code significantly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: clean up irq ifdef logic a bitMike Frysinger
Prefer MMR named checks over part-specific lists, condense duplicated code across different #ifdef branches, simplify CONFIG_PM ifdefs, and drop unused kgdb header. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: ints-priority: unify duplicate vec to irq lookup logicMike Frysinger
Seems the ipipe code just copied & pasted the existing irq lookup logic, so pull the logic out of do_irq() and into a local helper, and convert the two users over to that. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-25Blackfin: ints-priority: clean up some local varsMike Frysinger
The local ivg structs need not be exported, so mark them as static. Further, the "num_spurious" variable is only incremented and never actually read anywhere, so punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-29bfin: Convert irq namespaceThomas Gleixner
Convert to the new function names. Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org
2011-03-29bfin: Final irq cleanupThomas Gleixner
Use the trigger type in irq_data and check level type instead of looking at desc->handle_irq. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org
2011-03-18Blackfin/ipipe: upgrade to I-pipe mainlinePhilippe Gerum
This patch introduces Blackfin-specific bits to support the current tip of the interrupt pipeline development, mainly: - 2/3-level interrupt maps (sparse IRQs) - generic virq handling - sysinfo v2 format for ipipe_get_sysinfo() Signed-off-by: Philippe Gerum <rpm@xenomai.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: convert gpio irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: convert mac irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: convert error irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: convert internal irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: convert core irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18Blackfin: use proper wrappers for irq_descThomas Gleixner
Fixup the open coded access to irq_desc and use the proper wrappers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-10Blackfin: bf54x: don't ack GPIO ints when unmasking themMike Frysinger
When unmasking a GPIO interrupt on a BF54x part, the code will implicitly ack any pending interrupts. This is not what unmasking should do and can cause people to miss interrupts from their devices, so punt the code. Reported-by: Rutger Hofman <rutger@cs.vu.nl> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: bf561: rewrite SICA_xxx to just SIC_xxxMike Frysinger
This matches all the other Blackfin ports and keep us from having to write bf561-specific code in many places. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-22Blackfin: SIC: fix off-by-one error in loopMichael Hennerich
Make sure we include EMAC_SYSTAT when showing errors. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-07Blackfin: Rename IRQ flags handling functionsDavid Howells
Rename h/w IRQ flags handling functions to be in line with what is expected for the irq renaming patch. This renames local_*_hw() to hard_local_*() using the following perl command: perl -pi -e 's/local_irq_(restore|enable|disable)_hw/hard_local_irq_\1/ or s/local_irq_save_hw([_a-z]*)[(]flags[)]/flags = hard_local_irq_save\1()/' `find arch/blackfin/ -name "*.[ch]"` and then fixing up asm/irqflags.h manually. Additionally, arch/hard_local_save_flags() and arch/hard_local_irq_save() both return the flags rather than passing it through the argument list. Signed-off-by: David Howells <dhowells@redhat.com>
2010-05-22Blackfin: SIC: cut down on IAR MMR reads a bitMike Frysinger
Tweak the for loops that operate on the SIC IAR system MMRs to avoid re-reading them multiple times in a row. System MMRs are a little slower to access, so avoid the penalty when possible. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-21Blackfin: punt Blackfin-specific GPIO wakeup APIMichael Hennerich
This patch removes a custom GPIO wakeup API which allowed GPIOs to act as wakeup sources, which are not configured as Interrupts. This API is a leftover from the time before irq_wake was established. From now on people must use enable_irq_wake(GPIO_IRQx) and the GPIO in question needs to be configured as Interrupt. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: don't support keypad wakeup from hibernateMichael Hennerich
The on-chip keypad peripheral requires different registers to be setup depending on the standby type (standby vs hibernation). However, since the power management framework doesn't differentiate between these types, the driver doesn't know which registers to program and subsequently it avoids doing so. Always enabling the keyboard wakeup source causes misbehavior when the pins are not assigned to the keypad. If they happen to drive a certain level, they'll trigger a wake up event which is not wanted. So until the aforementioned issue can be sorted out, drop support for the wakeup source completely. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: add support for the on-chip MAC status interruptsMichael Hennerich
This patch provides infrastructure for MAC Wake-On-Lan and PHYINT use in phylib. New Interrupts added: IRQ_MAC_PHYINT /* PHY_INT Interrupt */ IRQ_MAC_MMCINT /* MMC Counter Interrupt */ IRQ_MAC_RXFSINT /* RX Frame-Status Interrupt */ IRQ_MAC_TXFSINT /* TX Frame-Status Interrupt */ IRQ_MAC_WAKEDET /* Wake-Up Interrupt */ IRQ_MAC_RXDMAERR /* RX DMA Direction Error Interrupt */ IRQ_MAC_TXDMAERR /* TX DMA Direction Error Interrupt */ IRQ_MAC_STMDONE /* Station Mgt. Transfer Done Interrupt */ On BF537/6 the implementation is not straight forward since there are now two chained chained_handlers. A cleaner approach would have been to add latter IRQs to the demux of IRQ_GENERIC_ERROR. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: increase NR_IRQS beyond NR on-chip IRQsMichael Hennerich
This makes room for off-chip IRQ controllers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: try to simplify interrupt ifdef uglinessYi Li
Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: SMP: make core timers per-cpu clock events for HRTYi Li
SMP systems require per-cpu local clock event devices in order to enable HRT support. One a BF561, we can use local core timer for this purpose. Originally, there was one global core-timer clock event device set up for core A. To accomplish this feat, we need to split the gptimer0/core timer logic so that each is a standalone clock event. There is no requirement that we only have one clock event source anyways. Once we have this, we just define per-cpu clock event devices for each local core timer. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: SMP: add support for IRQ affinitySonic Zhang
Now that the Blackfin IRQ controller supports this, drivers get the normal functionality of controlling which CPU to bind IRQs to. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-03-09Blackfin: pull in asm/bfin_can.h for interrupt masksMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-12-15Blackfin: BF537: push down error masks to avoid namespace pollutionMike Frysinger
The error masks are only needed in the BF537 demux error code, so instead of needing all the short peripheral defines in global space, push these masks into the one file where they are actually needed. This fixes a bunch of define collisions with common code (can/serial/etc...). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Barry Song <barry.song@analog.com>
2009-12-15Blackfin: pull in asm/dpmc.h for power definesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-10-07Blackfin: mass clean up of copyright/licensing infoRobin Getz
Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-16Blackfin: handle the core timer interrupt with handle_percpu_irq on SMPGraf Yang
Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 12:30:44 +0000