summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-09-17ARM: 6395/1: VExpress: Set bit 22 in the PL310 (cache controller) AuxCtlr ↵Catalin Marinas
register Clearing bit 22 in the PL310 Auxiliary Control register (shared attribute override enable) has the side effect of transforming Normal Shared Non-cacheable reads into Cacheable no-allocate reads. Coherent DMA buffers in Linux always have a Cacheable alias via the kernel linear mapping and the processor can speculatively load cache lines into the PL310 controller. With bit 22 cleared, Non-cacheable reads would unexpectedly hit such cache lines leading to buffer corruption. Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to data ↵Will Deacon
corruption On the r2p0, r2p1 and r2p2 versions of the Cortex-A9, data corruption can occur if a shared cache line is replaced on one CPU as another CPU is accessing it. This workaround sets two bits in the diagnostic register of the Cortex-A9, reducing the linefill issuing capabilities of the processor and avoiding the erroneous behaviour. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17ARM: 6388/1: errata: DMB operation may be faultyWill Deacon
On versions of the Cortex-A9 up to and including r2p2, under rare circumstances, a DMB instruction between 2 write operations may not ensure the correct visibility ordering of the 2 writes. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing the DMB instruction to behave like a DSB, which functions correctly on the affected cores. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17ARM: 6387/1: errata: check primary part ID in proc-v7.SWill Deacon
Kconfig doesn't have any knowledge of specific v7 cores, so it is possible to select errata workarounds that may cause inadvertent behaviour when executed on a core other than those targetted by the fix. This patch improves the variant and revision checking in proc-v7.S so that the primary part number is also considered when applying errata workarounds. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17ARM: 6377/1: supply _cansleep gpio function to U300Linus Walleij
We have to use _cansleep gpio accessors in the MMCI driver so as to avoid slowpath warnings, now U300 has MMCI but doesn't have these functions in place to siply wrap the existing non-sleeping functions into sleepable variants. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17ARM: 6376/1: plat-nomadik: MTU: Change prescaler limit and comment updatesLinus Walleij
The prescaler 16 is now used only when the timer runs at 32 MHz or more. Some comment updates as well. Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-17ARM: 6375/1: plat-nomadik: MTU timer trivial bug fixLinus Walleij
timer0 to 3 are all on mtu block 0, so don't calculate the clock event rate based upon mtu block 1's clock speed. Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-15omap: Fix compile dependency to LEDS_CLASSTony Lindgren
If we LEDS_CLASS is not selected, we will get undefined reference to `led_classdev_register'. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-14ARM: S3C64XX: Fix dev-spi buildMark Brown
The irqs.h usage here got missed in the Samsung platform reorganisation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstrKukjin Kim
This patch fixes bug on gpio drive strength helper function. The offset should be like follwoing. - off = chip->chip.base - pin; + off = pin - chip->chip.base; In the s5p_gpio_get_drvstr(), the second line is unnecessary, because overwrite drvstr. drvstr = __raw_readl(reg); - drvstr = 0xffff & (0x3 << shift); And need 2bit masking before return the drvstr value. drvstr = drvstr >> shift; + drvstr &= 0x3; In the s5p_gpio_set_drvstr(), need relevant bit clear. tmp = __raw_readl(reg); + tmp &= ~(0x3 << shift); tmp |= drvstr << shift; Reported-by: Jaecheol Lee <jc.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: SAMSUNG: Fix on drive strength valueKukjin Kim
This patch fixes on defined drive strength value for GPIO. According to data sheet, if we want drive strength 1x, the value should be 00(b), if 2x should be 10(b), if 3x should be 01(b), and if 4x should be 11(b). Also fixes comment(from S5C to S5P). Reported-by: Janghyuck Kim <janghyuck.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: S5PV210: Add FIMC clocksMarek Szyprowski
These clocks enables FIMC driver to operate on machines, which bootloader power gated FIMC devices to save power on boot. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: S5PV210: Reduce the iodesc length of systimerKyungmin Park
It's enough to use 4KiB. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: S5PV210: Update I2C-1 Clock Register Property.MyungJoo Ham
CLK_GATE_IP3[8] is RESERVED. The port "I2C_HDMI_DDC" of CLK_GATE_IP3[10] is used as another I2C port. Therefore, defined the unused I2C-1 as another I2C there was left undefined but used. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: S5P: Decrease IO Registers memory region size on FIMCSylwester Nawrocki
IO registers region size of all FIMC versions is less than 1kB so there is no need to reserve 1M. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-14ARM: S5P: Fix DMA coherent mask for FIMCMarek Szyprowski
FIMC driver uses DMA_coherent allocator, which requires proper dma mask to be set. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-09-10Merge branch 'at91-fixes-for-linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds
* 'at91-fixes-for-linus' of git://github.com/at91linux/linux-2.6-at91: AT91: at91sam9261ek: remove C99 comments but keep information AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMC AT91: dm9000 initialization update AT91: SAM9G45 - add a separate clock entry for every single TC block AT91: clock: peripheral clocks can have other parent than mck AT91: change dma resource index
2010-09-10AT91: at91sam9261ek: remove C99 comments but keep informationNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10AT91: at91sam9261ek board: remove warnings related to use of SPI or SD/MMCNicolas Ferre
The sd/mmc data structure is not used if SPI is selected. The configuration of PIO on the board prevent from using both interfaces at the same time (board dependent). Remove the warnings at compilation time adding a preprocessor condition. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-10AT91: dm9000 initialization updateNicolas Ferre
Add information in dm9000 mac/phy chip initialization: - irq resource details - platform data details Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-09ARM: Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09ARM: Partially revert "Auto calculate ZRELADDR and provide option for ↵Russell King
exceptions" Partially revert e69edc7, which introduced automatic zreladdr support. The change in the way the manual definition is defined seems to be error and conflict prone. Go back to the original way we were handling this for the time being, while keeping the automatic zreladdr facility. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-09Merge branch 'origin'Russell King
2010-09-09AT91: SAM9G45 - add a separate clock entry for every single TC blockFabian Godehardt
Without this patch you will not be able to register the first block because of the second association call on at91_add_device_tc(). Signed-off-by: Fabian Godehardt <fg@emlix.com> [nicolas.ferre@atmel.com: change tcb1_clk to fake child clock of tcb0_clk] Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-09AT91: clock: peripheral clocks can have other parent than mckNicolas Ferre
While registering clock allow to set parent clock other than mck. It is useful for clocks than can be seen as child clock of a peripheral. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2010-09-08ARM: Ensure PTE modifications via dma_alloc_coherent are visibleRussell King
Dave Hylands reports: | We've observed a problem with dma_alloc_writecombine when the system | is under heavy load (heavy bus traffic). We've managed to reduce the | problem to the following snippet, which is run from a kthread in a | continuous loop: | | void *virtAddr; | dma_addr_t physAddr; | unsigned int numBytes = 256; | | for (;;) { | virtAddr = dma_alloc_writecombine(NULL, | numBytes, &physAddr, GFP_KERNEL); | if (virtAddr == NULL) { | printk(KERN_ERR "Running out of memory\n"); | break; | } | | /* access DMA memory allocated */ | tmp = virtAddr; | *tmp = 0x77; | | /* free DMA memory */ | dma_free_writecombine(NULL, | numBytes, virtAddr, physAddr); | | ...sleep here... | } | | By itself, the code will run forever with no issues. However, as we | increase our bus traffic (typically using DMA) then the *tmp = 0x77 | line will eventually cause a page fault. If we add a small delay (a | few microseconds) before the *tmp = 0x77, then we don't see a page | fault, even under heavy load. A dsb() is required after modifying the PTE entries to ensure that they will always be visible. Add this dsb(). Reported-by: Dave Hylands <dhylands@gmail.com> Tested-by: Dave Hylands <dhylands@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08ARM: 6359/1: ep93xx: move clock initialization earlierMika Westerberg
Commit 7cfe24947 ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") changed AMBA bus to handle the PCLK automatically. However, in EP93xx clock initialization is arch_initcall which is done later than AMBA device identification. This causes amba_get_enable_pclk() to fail resulting device where UARTs are not functional. So change ep93xx_clock_init() to be postcore_initcall. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-08Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"Russell King
This reverts commit 4fa5518, which causes a compilation regression for IXP4xx platforms. Reported-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-07AT91: change dma resource indexNicolas Ferre
Reported-by: Dan Liang <dan.liang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-02ARM: 6352/1: perf: fix event validationWill Deacon
The validate_event function in the ARM perf events backend has the following problems: 1.) Events that are disabled count towards the cost. 2.) Events associated with other PMUs [for example, software events or breakpoints] do not count towards the cost, but do fail validation, causing the group to fail. This patch changes validate_event so that it ignores events in the PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs. Reported-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-02ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7Catalin Marinas
CPU_32v6K is selected by CPU_V7 but it only depends on CPU_V6. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01[ARM] tegra: Add ZRELADDR default for ARCH_TEGRAErik Gilling
fixes the warning: .config:369:warning: symbol value '' invalid for ZRELADDR and the prompt for ZRELADDR on make Signed-off-by: Erik Gilling <konkers@android.com>
2010-09-01Merge branch 'imx-for-2.6.36' of git://git.pengutronix.de/git/imx/linux-2.6Russell King
2010-09-01Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-09-01Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6Russell King
2010-09-01ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARMMikael Pettersson
The 2.6.36-rc kernel added three new system calls: fanotify_init, fanotify_mark, and prlimit64. This patch wires them up on ARM. The only non-trivial issue here is the u64 argument to sys_fanotify_mark(), but it is the 3rd argument and thus passed in r2/r3 in both kernel and user space, so it causes no problems. Tested with a 2.6.36-rc2 EABI kernel on an ixp4xx machine. Tested-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-01ARM: 6330/1: perf: reword comments relating to perf_event_do_pendingWill Deacon
This is purely a cosmetic change to the ARM perf backend because the current comments about the relationship between NMIs, interrupt context and perf_event_do_pending are misleading. This patch updates the comments so that they reflect what the code actually does (which is in line with other architectures). Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-30ARM: pxa: Make id const in pwm_probe()Uwe Kleine-König
This fixes the compiler warning: arch/arm/plat-pxa/pwm.c: In function 'pwm_probe': arch/arm/plat-pxa/pwm.c:179: warning: initialization discards qualifiers from pointer target type Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300Axel Lin
According to PXA3xx Processor Family Developer Manuall Vol1. section "Pin Descriptions and Control", PXA30x and PXA31x Processor Alternate Function Table shows the Alt FN 0 for GPIO51 is CI_HSYNC and for GPIO52 is CI_VSYNC. This patch fixes the MFP defines and also corrects the order of MFD defines. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-30ARM: pxa: remove __init from cpufreq_driver->init()Eric Miao
This is causing section mismatches when linking, as cpufreq_driver->init() is not supposed to be in init section. Reported-by: Tomáš 'Sleep_Walker' Čech <sleep_walker@suse.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-28Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV310: Fix on Secondary CPU startup ARM: S5PV310: Bug fix on uclk1 and sclk_pwm ARM: S5PV310: Fix missed uart clocks ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll ARM: S5PV310: Fix on PLL setting for S5PV310 ARM: S5PV310: Add CMU block for S5PV310 Clock ARM: S5PV310: Fix on typo irqs.h of S5PV310 ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310 ARM: S5PV310: Fix on GPIO base addresses ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type ARM: S5P: VMALLOC_END should be unsigned long
2010-08-28Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: VMALLOC_END should be unsigned long arm: tegra: fix compilation of board-harmony.c
2010-08-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: PM: ensure IO wakeups are properly disabled omap: Fix omap_4430sdp_defconfig for make oldconfig omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq omap: Fix sev instruction usage for multi-omap OMAP3: Fix a cpu type check problem omap3: id: fix 3630 rev detection
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-27ARM: S5PV310: Fix on Secondary CPU startupChanghwan Youn
Following occurs on boot message without this patch. CPU1: processor failed to boot Brought up 1 CPUs SMP: Total of 1 processors activated... This patch adds SYSRAM mapping for fixing Secondary CPU startup. CPU1: Booted secondary processor Brought up 2 CPUs SMP: Total of 2 processors activated... Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Bug fix on uclk1 and sclk_pwmJongpill Lee
This patch fixes on enable and ctrlbit of uclk1 and sclk_pwm. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix missed uart clocksJongpill Lee
This patch adds missed uart clocks for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apllJongpill Lee
This patch adds clk_sclk_apll so that fixes on clk_mout_apll. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on PLL setting for S5PV310Jongpill Lee
This patch fixes on PLL setting for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Add CMU block for S5PV310 ClockKukjin Kim
This patch adds CMU block for S5PV310/S5PC210 clock. (CMU: Clock Management Unit) Of course, changed current clock addresses for it together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 22:28:44 +0000