summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2013-10-27Merge tag 'ux500-dt-for-v3.13-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt From Linus Walleij: Five incremental device tree patches around the clock handling, and adding SSP/SPI devices to the device tree. * tag 'ux500-dt-for-v3.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: ux500: register all SSP and SPI blocks ARM: ux500: fix I2C4 clock bit ARM: ux500: fix clock for GPIO blocks 6 and 7 clk: ux500: fix erroneous bit assignment ARM: ux500: fix clock for GPIO block 8 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-27Merge tag 'sunxi-fixes-for-3.13' of https://github.com/mripard/linux into ↵Olof Johansson
next/dt From Maxime Ripard: Allwinner sunXi SoCs minor fixes for 3.13 * tag 'sunxi-fixes-for-3.13' of https://github.com/mripard/linux: ARM: sun6i: Fix the APB2 clock gates register size Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-27Merge tag 'sunxi-dt-for-3.13' of https://github.com/mripard/linux into next/dtOlof Johansson
From Maxime Ripard: Allwinner sunXi SoCs device tree changes for 3.13 This DT series sees the introduction of the cubietruck DT, plus the addition of the i2c controller for the A20 based boards, and of the Security ID found in all the Allwinner SoCs but the A31. * tag 'sunxi-dt-for-3.13' of https://github.com/mripard/linux: ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck ARM: sun7i: olinuxino-micro: Enable the I2C controllers ARM: sun7i: cubieboard2: Enable the I2C controllers ARM: sun7i: Add the pin muxing options for the I2C controllers ARM: sun7i: Enable the I2C controllers ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-18Merge tag 'omap-for-v3.13/board-removal-signed-take2' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to drop legacy booting support for some omap3 boards. Note that that these are based on a merge of the following for the dependencies: - v3.12-rc5 for fixes to pinctrl mask - omap-for-v3.13/dt-signed to avoid pointless merge conflicts - omap-for-v3.13/quirk-signed for legacy pdata handling * tag 'omap-for-v3.13/board-removal-signed-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (125 commits) ARM: OMAP2+: remove legacy support for IGEP boards ARM: OMAP2+: Remove legacy support for zoom platforms ARM: OMAP2+: Remove legacy booting support for omap3 EVM ARM: OMAP2: delete board-rm680 ARM: dts: add minimal DT support for Nokia N950 & N9 phones ARM: dts: Add basic support for zoom3 ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) ARM: dts: Add common support for omap3-evm ARM: dts: Shared file for omap GPMC connected smsc911x +Linux 3.12-rc5 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-18ARM: OMAP2+: remove legacy support for IGEP boardsJavier Martinez Canillas
Device Tree support for IGEP boards in mainline is almost finished. The only remaining bits are support for the Marvell SD8686 wifi + BT and TFP410 DVI chips. Adding support for these should be straightforward so let's not block OMAP3 moving to Device Tree only boot and remove the board file for IGEP boards. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-18ARM: OMAP2+: Remove legacy support for zoom platformsTony Lindgren
We now have pretty decent device tree based support for zoom platforms. It's not complete, but basics work for me so adding more features should be quite trivial. Looks like also 3630 sdp is zoom based, and looking at it's board file should also be trivial to support with the device tree based booting. Patches are welcome if people are still using these. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-18ARM: OMAP2+: Remove legacy booting support for omap3 EVMTony Lindgren
We now have pretty decent support with the device tree based booting. Patches to add more features are welcome. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-18ARM: OMAP2: delete board-rm680Aaro Koskinen
Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting should be used for further development on this HW. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-18ARM: dts: add minimal DT support for Nokia N950 & N9 phonesAaro Koskinen
Add minimal DT support for Nokia N950 & N9 phones. The same functionality that is provided by the current board file should work: serial console, USB, OneNAND and MMC. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-18ARM: dts: Add basic support for zoom3Tony Lindgren
I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my omap is an early ES revision, I have not been able to test off-idle on this one. But anyways, I'd say we have enough device tree support for the zoom to be able to drop the board-zoom files. Patches are welcome to add further features to this .dts file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-18Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dtKevin Hilman
From Nicolas Ferre: First DT series for 3.13 - addition of sound for at91sam9n12 - a little fix for MMC vs. SPI on at91sam9g20ek * tag 'at91-dt' of git://github.com/at91linux/linux-at91: ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek ARM: at91: add sound support on at91sam9n12ek board ARM: at91: enable ssc on at91sam9n12ek board ARM: at91: enable wm8904 on at91sam9n12ek board ARM: at91: add ssc dma parameter for at91sam9n12 ARM: at91: add at91sam9n12 ssc clock in look up table Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-18ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ekJean-Christophe PLAGNIOL-VILLARD
These MMC and SPI buses can't be configured at the same time because they share the same traces on the EK board. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-18ARM: ux500: register all SSP and SPI blocksLinus Walleij
This adds the SSP and SPI blocks to the device tree and makes them active. Only this way can their clocks be properly gated off at boot. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-18ARM: ux500: fix I2C4 clock bitLinus Walleij
The PCLK for I2C4 is controlled by bit 10 in the PCKEN registers while the KCLK is controlled by bit 9 on the KCKEN, it's one of these odd assymetric things. Correct the PCLK bit to 10. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-18ARM: ux500: fix clock for GPIO blocks 6 and 7Linus Walleij
The clock assignment in the device tree for GPIO blocks 6 and 7 was incorrect, indicating this was managed by bit 1 on PRCC 2 while it was in fact bit 11 on PRCC 2. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-18ARM: ux500: fix clock for GPIO block 8Linus Walleij
The clock assignment in the device tree for GPIO block 8 was incorrect, indicating this was managed by bit 1 on PRCC 6 while it was in fact bit 1 on PRCC 5. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-17Merge branch 'tegra/dt' into next/dtKevin Hilman
From Stephen Warren: * tegra/dt: ARM: tegra: Use symbolic names for gr3d clocks ARM: tegra: Mark Tegra30 display controller compatible with Tegra20 ARM: tegra: add GPIO controller to tegra124.dtsi ARM: tegra: enable LP1 suspend mode for Venice2 ARM: tegra: enable Tegra RTC as default for Tegra124 ARM: tegra: add Venice2 board support ARM: tegra: Add initial device tree for Tegra124 ARM: tegra: add vcc supply for nct1008 to Cardhu ARM: tegra: add DT entry for nct1008 to Dalmore ARM: tegra: use dt-binding header for key code ARM: tegra: add palmas pincontrol to Dalmore device tree Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-17Merge tag 'dt-3.13-3' of git://git.infradead.org/linux-mvebu into next/dtKevin Hilman
From Jason Cooper: mvebu dt changes for v3.13 (round 3) - dove - add audio devices - fix bad properties of si5351 clkout2 for CuBox * tag 'dt-3.13-3' of git://git.infradead.org/linux-mvebu: ARM: Dove: fix bad properties of the si5351 clkout2 used by Cubox audio ARM: Dove: Add the audio device to the Cubox DT ARM: Dove: Add the audio devices in DT
2013-10-17ARM: tegra: Use symbolic names for gr3d clocksThierry Reding
Commit 05849c9381354be4bd4a2a878b5ecb12d375a1a0 (ARM: tegra30: convert device tree files to use CLK defines) updated the Tegra30 device tree to use symbolic clock names but forgot to update this node. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-17ARM: tegra: Mark Tegra30 display controller compatible with Tegra20Thierry Reding
The display controller found on Tegra30 SoCs is backwards-compatible with the one on Tegra20 SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-15ARM: tegra: add GPIO controller to tegra124.dtsiStephen Warren
The Tegra124 GPIO controller is identical to Tegra30, so copy the DT node from tegra30.dtsi to tegra124.dtsi. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-10-14Merge tag 'omap-for-v3.13/dt-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: omap device tree related changes via Benoit Cousson <bcousson@baylibre.com>: Add the minimal DTS support for DRA7xx based SoC core. Add the initial support for N900 and gta04 phones. Enable USB3 on OMAP5 evm board. Add support for cryto accelerators Add new IGEP AQUILA board Add AM33XX EDMA support Update HSUSB node to use the reset-gpios fmwk * tag 'omap-for-v3.13/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (58 commits) ARM: dts: dra7-evm: Add mmc2 node for eMMC support ARM: dts: dra7-evm: Add mmc1 node for micro-sd support ARM: dts: omap5-uevm: mark TWL6037 as system-power-controller ARM: dts: omap3-igep0020: use standard constant for IRQ flags ARM: dts: omap3-igep0020: Add HS USB Host support ARM: dts: omap3-igep: Add USB OTG support ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display ARM: dts: AM33XX: Add LCDC info into am335x-evm ARM: dts: AM437X: Add DES node ARM: dts: AM437X: Add AES node ARM: dts: AM33XX: Fix AES interrupt number ARM: dts: AM33XX: Add AES data and documentation ARM: dts: AM33XX: Add SHAM data and documentation ARM: dts: OMAP4: Add DES3DES node ARM: dts: OMAP4: Add AES node ARM: dts: am335x-evm[sdk]: switch mmc1 to 4-bit mode ARM: dts: am335x-bone-common: correct mux mode for cmd line ARM: dts: AM33XX: Add support for IGEP AQUILA EXPANSION board. ARM: dts: AM33XX: Add support for IGEP COM AQUILA ARM: dts: am335x-boneblack: move fixed regulator to board level ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14Merge tag 'omap-for-v3.13/quirk-signed' of ↵Kevin Hilman
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt From Tony Lindgren: Changes needed to prepare for making omap3 device tree only: - Always build in board-generic, and add pdata quirks and auxdata support for it so we have all the pdata related quirks in the same place. - Merge of the drivers/pinctrl changes that are needed for PM to continue working on omap3 and also needed for other omaps eventually. The three pinctrl related patches have been acked by Linus Walleij and are pulled into both the pinctrl tree and this branch. - Few defconfig related changes for drivers needed. * tag 'omap-for-v3.13/quirk-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (523 commits) ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it ARM: OMAP2+: Add minimal 8250 support for GPMC ARM: OMAP2+: Use pdata quirks for wl12xx for omap3 evm and zoom3 ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap ARM: OMAP2+: Add support for auxdata pinctrl: single: Add support for auxdata pinctrl: single: Add support for wake-up interrupts pinctrl: single: Prepare for supporting SoC specific features ARM: OMAP2+: igep0020: use display init from dss-common ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board +Linux 3.12-rc4 Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14Merge tag 'socfpga-dts-updates-for-v3.13' of ↵Kevin Hilman
git://git.rocketboards.org/linux-socfpga-next into next/dt From Dinh Nguyen: Updates to dts file structure for Altera's SOCFPGA * Does not include any new bindings or bindings change * Add dts file for a SOCFPGA with an Arria V FPGA * Add a clocks property for the TWD timer * Add support for Terasic SocKit Board which has Cyclone5 FPGA * From Steffen Trumtrar: "This series includes some minor cleanups (indentation and clock labels) and reorders the socfpga dts hierarchy from: socfpga.dtsi -> socfpga_$board.dts -> socfpga_$otherboard.dts to socfpga.dtsi -> socfpga_cyclone5.dtsi --> socfpga_cyclone5_$board.dts --> socfpga_cyclone5_$otherboard.dts " * tag 'socfpga-dts-updates-for-v3.13' of git://git.rocketboards.org/linux-socfpga-next: dts: socfpga: Add support for Altera's SOCFPGA Arria V board ARM: socfpga: dts: fix s2f_* clock name ARM: socfpga: dts: cleanup indentation ARM: socfpga: dts: Add support for terasic SoCkit ARM: socfpga: dts: Move common nodes to cyclone5 dtsi arm: socfpga: Add clock for smp_twd timer Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14Merge branch 'renesas/dt2' into next/dtKevin Hilman
From Simon Horman: * renesas/dt2: (21 commits) ARM: shmobile: bockw: fixup ether node naming ARM: shmobile: r8a7779: add irqpin default status on DTSI ARM: shmobile: marzen: fixup SMSC IRQ number on DTS ARM: shmobile: bockw: add SMSC support on DTS ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSI ARM: shmobile: r8a7791 SMP device tree node ARM: shmobile: r8a7791 Arch timer device tree node ARM: shmobile: r8a7791 IRQC device tree node ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces ARM: shmobile: armadillo-reference: Add PWM backlight node to DT ARM: shmobile: r8a73a4: add a DT node for the DMAC ARM: shmobile: r8a7790: add I2C DT nodes ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards ARM: shmobile: r8a7778: add usb phy power control function ARM: shmobile: r8a7778: add USBHS clock ARM: shmobile: r8a7791 CMT support ARM: shmobile: r8a7791 SCIF support ARM: shmobile: Initial r8a7791 SoC support ARM: shmobile: r8a7778: add SSI/SRU clock support ARM: shmobile: r8a7790: Add DU and LVDS clocks ... Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-10-14ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)Tony Lindgren
I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support with the pinctrl patches, so it probably works better than the board-*.c files ever did. Also the board-omap3evm.c file is broken for the DSS, and has been for a while. Patches are welcome to fix it in this .dts file, let's just drop the board-*.c file for this. Note that off-idle currently requires doing request_irq() on the wake-up pin from pinctrl-single IRQ domain until we can handle that in some Linux generic way. [tony@atomide.com: updated for make dtbs build fix] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-14ARM: dts: Add common support for omap3-evmTony Lindgren
Looks like the main difference between the TMDSEVM3530 and TMDSEVM3730 is just the omap processor: http://www.ti.com/tool/tmdsevm3530 http://www.ti.com/tool/tmdsevm3730 So let's add a common file for the EVMs, and fix the description for the omap3-evm.dst as that's clearly for the TMDSEVM3530 since it includes omap34xx.dtsi. It cannot support the TMDSEVM3730 properly, and we need a separate file for that in the following patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-14ARM: dts: Shared file for omap GPMC connected smsc911xTony Lindgren
Looks like at least Igep, Zoom and EVM boards can use a common file for the GPMC connected smsc911x. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-14Merge branches 'omap-for-v3.13/dt' and 'omap-for-v3.13/quirk' into ↵Tony Lindgren
omap-for-v3.13/board-removal We need the fixes in v3.12-rc5, dts changes in omap-for-v3.13/dt, and the platform data quirk changes in omap-for-v3.13/quirk to start removing omap3 board files without breaking things.
2013-10-14ARM: at91: add sound support on at91sam9n12ek boardBo Shen
Add sound support on at91sam9n12ek board with wm8904 as codec. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: enable ssc on at91sam9n12ek boardBo Shen
Enable ssc on at91sam9n12ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: enable wm8904 on at91sam9n12ek boardBo Shen
Enable wm8904 codec on at91sam9n12ek board, which is connect to i2c0 bus with 0x1a as address. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: add ssc dma parameter for at91sam9n12Bo Shen
Add ssc dma parameter for at91sam9n12 Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-14ARM: at91: add at91sam9n12 ssc clock in look up tableBo Shen
Add at91sam9n12 ssc clock in look up table Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-10-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
2013-10-13ARM: exynos: dts: Update 5250 arch timer node with clock frequencyYuvaraj Kumar C D
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge tag 'fixes-against-v3.12-rc3-take2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-11ARM: configs: omap2plus_defconfig: enable dwc3 and dependenciesFelipe Balbi
DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11ARM: dts: dra7-evm: Add mmc2 node for eMMC supportBalaji T K
Add mmc2 dt node to dra7-evm board and model eMMC vcc as fixed regulator. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: dra7-evm: Add mmc1 node for micro-sd supportBalaji T K
Add mmc1 dt node to dra7-evm board. Input for ldo1 regulator is controlled by gpio 5 of pcf8575 chip (0x21) on i2c1 bus. When dt support for gpio-pcf857x is available, input supply will be modelled as cascaded regulator. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: omap5-uevm: mark TWL6037 as system-power-controllerNishanth Menon
This allows the palmas pm_power_off to kick in on power off command and switch off the board. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: omap3-igep0020: use standard constant for IRQ flagsJavier Martinez Canillas
Commit 840ef8b7 ("ARM: dt: add header to define IRQ flags") added constants for IRQ edge/level triggered types so use it instead of a magic number to enhance the DT readability. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: omap3-igep0020: Add HS USB Host supportJavier Martinez Canillas
Add device nodes for the HS USB Host port 1, USB PHY and its required regulator and also pin mux setup for HS USB1 pins. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: omap3-igep: Add USB OTG supportJavier Martinez Canillas
Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to O added USB OTG support for most OMAP boards but some OMAP3 boards such as IGEP boards were not updated. This patch adds an USB OTG device node to these board. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable displayDarren Etheridge
Enable the hdmi output and the LCD Controller on BeagleBone Black. Also configure the correct pinmux for output of video data from the SoC to the HDMI encoder. Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: AM33XX: Add LCDC info into am335x-evmBenoit Parrot
Add LCDC device node in DT for am33xx Add LCDC and Panel info in DT for am335x-evm Changes: - remove redundant/unnecessary SoC specific setting in the board dts - resolved conflicts on for_3.13/dts Signed-off-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: AM437X: Add DES nodeJoel Fernandes
AM437x SoC has a DES3DES module similar to the one on OMAP4. Add DT node for the same. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: AM437X: Add AES nodeJoel Fernandes
AM437x SoC has AES module similar to the one on OMAP4. Add DT node for the same. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: AM33XX: Fix AES interrupt numberJoel Fernandes
AES interrupts were previously not used, but after recent changes to omap-aes driver, its being used. Correct the interrupt number to have working PIO mode. Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-11ARM: dts: AM33XX: Add AES data and documentationMark A. Greer
Add the generic AM33XX AES module's device tree data and enable it for the am335x-evm, am335x-evmsk, and am335x-bone platforms. Also add Documentation file describing the data for the AES module. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Joel Fernandes <joelf@ti.com> [joelf@ti.com: Dropped interrupt-parent property, documentation fixups] Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:20:40 +0000