summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2019-09-16Merge tag 'gpio-v5.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of changes in the GPIO subsystem for the v5.4 kernel cycle. Core changes: - Support hierarchical GPIO irqchips. We now have three consumers that can use this: Intel IXP4xx, ThunderX and Qualcomm SPMI GPIO (in the pinctrl subsystem). The support code has been long in the making and hashed out so it should be easily adaptable for all hierarchical irqchip parents. The code only gets compiled in if hierarchical irqchip is used at the topmost irq controller at least, as the hierarchical irqchip requires strict hierarchy all the way up in the system. - Determine the need for a "valid_mask" for GPIO lines on the gpio_chip and conversely for the "valid_mask" for the GPIO interrupt chip interrupt lines by looking for a .init_valid_mask() callback in the main chip or GPIO interrupt chip respectively. Allocate it with bitmap_alloc(). - Isolate the device tree/open firmware GPIO description code out in its own file properly. - Isolate the ACPI GPIO description code out in its own file properly. - Drop a whole lot of #ifdef:s in the main includes: it does not hurt to keep the include items around, and we get quicker and clearer compile failures if the appropriate kernel symbols are not selected for drivers. New/deleted drivers: - New driver for Aspeed SGPIO. - The KS8695 driver is deleted as the platform gets deleted from arch/arm in this kernel cycle. - The Cirrus Logic Madera driver now supports CS47L92 and CS47L15. - The Freescale MPC8xxx now supports LS1028A and LS1088A. Driver improvements: - We pass the GPIO irqchip intialization by directly filling in the struct instead of using set-up functions (the new way) for Intel MID, Lynxpoint, Merrifield, XLP, HLWD, Aspeed, ZX, VF610, TQMX86, MT7621, Zynq and EP93xx. Out-of-band changes: - Fix a GPIO header inclusion in Unicore - no response from maintainer. - Drop FMC subsystem from MAINTAINERS - was deleted in the GPIO tree last cycle so let's mop up the shards" * tag 'gpio-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (82 commits) gpiolib: of: add a fallback for wlf,reset GPIO name gpio: htc-egpio: Remove unused exported htc_egpio_get_wakeup_irq() gpio: remove explicit comparison with 0 gpio: creg-snps: use devm_platform_ioremap_resource() to simplify code gpio: devres: Switch to EXPORT_SYMBOL_GPL() gpio: of: Switch to EXPORT_SYMBOL_GPL() gpio: of: Make of_gpio_simple_xlate() private gpio: of: Make of_get_named_gpiod_flags() private gpio: aspeed: Add in ast2600 details to Aspeed driver gpio: aspeed: Use ngpio property from device tree if available gpio: aspeed: Setup irqchip dynamically gpio/aspeed: Fix incorrect number of banks gpio: aspeed: Update documentation with ast2600 controllers gpio: Initialize the irqchip valid_mask with a callback gpiolib: acpi: make acpi_can_fallback_to_crs() static gpio: Fix further merge errors gpio: Fix up merge collision in include file gpio: of: Normalize return code variable name gpio: gpiolib: Normalize return code variable name gpio: ep93xx: Pass irqchip when adding gpiochip ...
2019-09-15Merge branch 'spi-5.4' into spi-nextMark Brown
2019-09-05Merge tag 'v5.3-rc7' into develLinus Walleij
Linux 5.3-rc7
2019-09-02spi: ep93xx: Repair SPI CS lookup tablesAlexander Sverdlin
The actual device name of the SPI controller being registered on EP93xx is "spi0" (as seen by gpiod_find_lookup_table()). This patch fixes all relevant lookup tables and the following failure (seen on EDB9302): ep93xx-spi ep93xx-spi.0: failed to register SPI master ep93xx-spi: probe of ep93xx-spi.0 failed with error -22 Fixes: 1dfbf334f1236 ("spi: ep93xx: Convert to use CS GPIO descriptors") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Link: https://lore.kernel.org/r/20190831180402.10008-1-alexander.sverdlin@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-08-30Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "Three fixes for ARM this time around: - A fix for update_sections_early() to cope with NULL ->mm pointers. - A correction to the backtrace code to allow proper backtraces. - Reinforcement of pfn_valid() with PFNs >= 4GiB" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8901/1: add a criteria for pfn_valid of arm ARM: 8897/1: check stmfd instruction using right shift ARM: 8874/1: mm: only adjust sections of valid mm structures
2019-08-30Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The majority of the fixes this time are for OMAP hardware, here is a breakdown of the significant changes: Various device tree bug fixes: - TI am57xx boards need a voltage level fix to avoid damaging SD cards - vf610-bk4 fails to detect its flash due to an incorrect description - meson-g12a USB phy configuration fails - meson-g12b reboot should not power off the SD card - Some corrections for apparently harmless differences from the documentation. Regression fixes: - ams-delta FIQ interrupts broke in 5.3 - TI am3/am4 mmc controllers broke in 5.2 The logic_pio driver (used on some Huawei ARM servers) got a few bug fixes for reliability. And a couple of compile-time warning fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits) soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs bus: hisi_lpc: Add .remove method to avoid driver unbind crash bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free lib: logic_pio: Add logic_pio_unregister_range() lib: logic_pio: Avoid possible overlap for unregistering regions lib: logic_pio: Fix RCU usage arm64: dts: amlogic: odroid-n2: keep SD card regulator always on arm64: dts: meson-g12a-sei510: enable IR controller arm64: dts: meson-g12a: add missing dwc2 phy-names ARM: dts: vf610-bk4: Fix qspi node description ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ...
2019-08-28ARM: 8901/1: add a criteria for pfn_valid of armzhaoyang
pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted. The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic. [46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>] [46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>] [46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>] [46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>] [46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>] [46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>] (ret_fast_syscall+0x0/0x28) Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-24Merge tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: "Two fixes for regressions in this merge window: - select the Kconfig symbols for the noncoherent dma arch helpers on arm if swiotlb is selected, not just for LPAE to not break then Xen build, that uses swiotlb indirectly through swiotlb-xen - fix the page allocator fallback in dma_alloc_contiguous if the CMA allocation fails" * tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix zone selection after an unaddressable CMA allocation arm: select the dma-noncoherent symbols for all swiotlb builds
2019-08-23ARM: 8897/1: check stmfd instruction using right shiftLvqiang Huang
In the commit ef41b5c92498 ("ARM: make kernel oops easier to read"), - .word 0xe92d0000 >> 10 @ stmfd sp!, {} + .word 0xe92d0000 >> 11 @ stmfd sp!, {} then the shift need to change to 11. Signed-off-by: Lvqiang Huang <Lvqiang.Huang@unisoc.com> Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-23ARM: 8874/1: mm: only adjust sections of valid mm structuresDoug Berger
A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information. This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check. Fixes: 08925c2f124f ("ARM: 8464/1: Update all mm structures with section adjustments") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Peng Fan <peng.fan@nxp.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-08-22Merge tag 'Wimplicit-fallthrough-5.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull more fallthrough fixes from Gustavo A. R. Silva: "Fix fall-through warnings on arm and mips for multiple configurations" * tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: video: fbdev: acornfb: Mark expected switch fall-through scsi: libsas: sas_discover: Mark expected switch fall-through MIPS: Octeon: Mark expected switch fall-through power: supply: ab8500_charger: Mark expected switch fall-through watchdog: wdt285: Mark expected switch fall-through mtd: sa1100: Mark expected switch fall-through drm/sun4i: tcon: Mark expected switch fall-through drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through ARM: riscpc: Mark expected switch fall-through dmaengine: fsldma: Mark expected switch fall-through
2019-08-20ARM: riscpc: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warning (Building: rpc_defconfig arm): arch/arm/mach-rpc/riscpc.c: In function ‘parse_tag_acorn’: arch/arm/mach-rpc/riscpc.c:48:13: warning: this statement may fall through [-Wimplicit-fallthrough=] vram_size += PAGE_SIZE * 256; ~~~~~~~~~~^~~~~~~~~~~~~~~~~~ arch/arm/mach-rpc/riscpc.c:49:2: note: here case 256: ^~~~ Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-20arm: select the dma-noncoherent symbols for all swiotlb buildsChristoph Hellwig
We need to provide the arch hooks for non-coherent dma-direct and swiotlb for all swiotlb builds, not just when LPAS is enabled. Without that the Xen build that selects SWIOTLB indirectly through SWIOTLB_XEN fails to build. Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs") Reported-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Stefan Wahren <wahrenst@gmx.net>
2019-08-15Merge tag 'omap-for-v5.3/fixes-rc4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omap variants for v5.3-rc cycle We have another fix to disable voltage switching for am57xx SDIO as the bootrom cannot handle all the voltages after a reset that thought I had already sent a pull request for earlier but forgot. And we also update dra74x iodelay configuration for mmc3 to use the recommended values. Then I noticed we had introduced few new boot warnings with the various recent ti-sysc changes and wanted to fix those. I also noticed we still have too many warnings to be able to spot the real ones easily and fixed up few of those. Sure some of the warnings have been around for a long time and few of the fixes could have waited for the merge window, but having more usable dmesg log level output is a valuable. Other fixes are IO size correction for am335x UARTs that cause issues for at least FreeBSD using the same device tree file that checks that the child IO range is not larger than the parent has. For omap1 ams-delta keyboard we need to fix a irq ack that broke with all the recent gpio changes. And there are also few static checker warning fixes for recent am335x PM changes and ti-sysc driver and one switch fall-though update. * tag 'omap-for-v5.3/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: soc: ti: pm33xx: Make two symbols static soc: ti: pm33xx: Fix static checker warnings ARM: OMAP: dma: Mark expected switch fall-throughs ARM: dts: Fix incomplete dts data for am3 and am4 mmc bus: ti-sysc: Simplify cleanup upon failures in sysc_probe() ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack ARM: dts: dra74x: Fix iodelay configuration for mmc3 ARM: dts: am335x: Fix UARTs length ARM: OMAP2+: Fix omap4 errata warning on other SoCs ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7 ARM: dts: Fix flags for gpio7 bus: ti-sysc: Fix using configured sysc mask value bus: ti-sysc: Fix handling of forced idle ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss ARM: dts: am57xx: Disable voltage switching for SD card Link: https://lore.kernel.org/r/pull-1565844391-332885@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-14Merge tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - fix the handling of the bus_dma_mask in dma_get_required_mask, which caused a regression in this merge window (Lucas Stach) - fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me) - fix dma_mmap_coherent to not cause page attribute mismatches on coherent architectures like x86 (me) * tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: fix page attributes for dma_mmap_* dma-direct: don't truncate dma_required_mask to bus addressing capabilities dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
2019-08-13Merge tag 'imx-fixes-5.3-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.3, round 2: - A fix on vf610-bk4 board qspi device description to get SPI-NOR memory recognized correctly. * tag 'imx-fixes-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: vf610-bk4: Fix qspi node description Link: https://lore.kernel.org/r/20190812160020.GA12364@X250 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-08-13ARM: OMAP: dma: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13Merge branch 'ti-sysc-fixes' into fixesTony Lindgren
2019-08-13ARM: dts: Fix incomplete dts data for am3 and am4 mmcTony Lindgren
Commit 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") dropped legacy mmc platform data for am3 and am4, but missed the fact that we never updated the dts files for mmc3 that is directly on l3 interconnect instead of l4 interconnect. This leads to a situation with no legacy platform data and incomplete dts data. Let's update the mmc instances on l3 interconnect to probe properly with ti-sysc interconnect target module driver to make mmc3 work again. Let's still keep legacy "ti,hwmods" property around for v5.2 kernel and only drop it later on. Note that there is no need to use property status = "disabled" for mmc3. The default for dts is enabled, and runtime PM will idle unused instances just fine. Fixes: 4e27f752ab8c ("ARM: OMAP2+: Drop mmc platform data for am330x and am43xx") Reported-by: David Lechner <david@lechnology.com> Tested-by: David Lechner <david@lechnology.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13Merge branch 'ti-sysc-fixes' into fixesTony Lindgren
2019-08-13ARM: OMAP1: ams-delta-fiq: Fix missing irq_ackJanusz Krzysztofik
Non-serio path of Amstrad Delta FIQ deferred handler depended on irq_ack() method provided by OMAP GPIO driver. That method has been removed by commit 693de831c6e5 ("gpio: omap: remove irq_ack method"). Remove useless code from the deferred handler and reimplement the missing operation inside the base FIQ handler. Should another dependency - irq_unmask() - be ever removed from the OMAP GPIO driver, WARN once if missing. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13ARM: dts: dra74x: Fix iodelay configuration for mmc3Faiz Abbas
According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values can be configured. [1] http://www.ti.com/lit/ds/symlink/am5728.pdf [2] http://www.ti.com/lit/ds/symlink/dra746.pdf Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13ARM: dts: am335x: Fix UARTs lengthEmmanuel Vadot
As seen on the AM335x TRM all the UARTs controller only are 0x1000 in size. Fix this in the DTS. Signed-off-by: Emmanuel Vadot <manu@freebsd.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-13ARM: OMAP2+: Fix omap4 errata warning on other SoCsTony Lindgren
We have errata i688 workaround produce warnings on SoCs other than omap4 and omap5: omap4_sram_init:Unable to allocate sram needed to handle errata I688 omap4_sram_init:Unable to get sram pool needed to handle errata I688 This is happening because there is no ti,omap4-mpu node, or no SRAM to configure for the other SoCs, so let's remove the warning based on the SoC revision checks. As nobody has complained it seems that the other SoC variants do not need this workaround. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-08-12gpio: lpc32xx: allow building on non-lpc32xx targetsArnd Bergmann
The driver uses hardwire MMIO addresses instead of the data that is passed in device tree. Change it over to only hardcode the register offset values and allow compile-testing. Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-08-10dma-mapping: fix page attributes for dma_mmap_*Christoph Hellwig
All the way back to introducing dma_common_mmap we've defaulted to mark the pages as uncached. But this is wrong for DMA coherent devices. Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that flag is only treated special on the alloc side for non-coherent devices. Introduce a new dma_pgprot helper that deals with the check for coherent devices so that only the remapping cases ever reach arch_dma_mmap_pgprot and we thus ensure no aliasing of page attributes happens, which makes the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the remaining ones. Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but we'll phase it out soon. Fixes: 64ccc9c033c6 ("common: dma-mapping: add support for generic dma_mmap_* calls") Reported-by: Shawn Anastasio <shawn@anastas.io> Reported-by: Gavin Li <git@thegavinli.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
2019-08-10Merge tag 'Wimplicit-fallthrough-5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux Pull fall-through fixes from Gustavo A. R. Silva: "Mark more switch cases where we are expecting to fall through, fixing fall-through warnings in arm, sparc64, mips, i386 and s390" * tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: ARM: ep93xx: Mark expected switch fall-through scsi: fas216: Mark expected switch fall-throughs pcmcia: db1xxx_ss: Mark expected switch fall-throughs video: fbdev: omapfb_main: Mark expected switch fall-throughs watchdog: riowd: Mark expected switch fall-through s390/net: Mark expected switch fall-throughs crypto: ux500/crypt: Mark expected switch fall-throughs watchdog: wdt977: Mark expected switch fall-through watchdog: scx200_wdt: Mark expected switch fall-through watchdog: Mark expected switch fall-throughs ARM: signal: Mark expected switch fall-through mfd: omap-usb-host: Mark expected switch fall-throughs mfd: db8500-prcmu: Mark expected switch fall-throughs ARM: OMAP: dma: Mark expected switch fall-throughs ARM: alignment: Mark expected switch fall-throughs ARM: tegra: Mark expected switch fall-through ARM/hw_breakpoint: Mark expected switch fall-throughs
2019-08-09ARM: ep93xx: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. Fix the following warnings (Building: arm-ep93xx_defconfig arm): arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do': arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may fall through [-Wimplicit-fallthrough=] memset(crunch_state, 0, sizeof(*crunch_state)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ep93xx/crunch.c:53:2: note: here case THREAD_NOTIFY_EXIT: ^~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: signal: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/kernel/signal.c: In function 'do_signal': arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=] restart -= 2; ~~~~~~~~^~~~ arch/arm/kernel/signal.c:599:3: note: here case -ERESTARTNOHAND: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: OMAP: dma: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode': arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:393:2: note: here case OMAP_DMA_DATA_BURST_16: ^~~~ arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:402:2: note: here default: ^~~~~~~ arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode': arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dma_omap2plus()) { ^ arch/arm/plat-omap/dma.c:481:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: alignment: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/mm/alignment.c: In function 'thumb2arm': arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((tinstr & (3 << 9)) == 0x0400) { ^ arch/arm/mm/alignment.c:700:2: note: here default: ^~~~~~~ arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler': arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=] poffset->un = (tinst2 & 0xff) << 2; ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mm/alignment.c:754:2: note: here case 0xe940: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM: tegra: Mark expected switch fall-throughGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warning: arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable': arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=] tegra_cpu_reset_handler_set(reset_address); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-tegra/reset.c:74:2: note: here case 0: ^~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09ARM/hw_breakpoint: Mark expected switch fall-throughsGustavo A. R. Silva
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse': arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) ^ arch/arm/kernel/hw_breakpoint.c:611:2: note: here case 3: ^~~~ arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) ^ arch/arm/kernel/hw_breakpoint.c:615:2: note: here default: ^~~~~~~ arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info': arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE) ^ arch/arm/kernel/hw_breakpoint.c:547:2: note: here default: ^~~~~~~ In file included from include/linux/kernel.h:11, from include/linux/list.h:9, from include/linux/preempt.h:11, from include/linux/hardirq.h:5, from arch/arm/kernel/hw_breakpoint.c:16: arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending': include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=] # define unlikely(x) __builtin_expect(!!(x), 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~ include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely' unlikely(__ret_warn_on); \ ^~~~~~~~ arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN' WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); ^~~~ arch/arm/kernel/hw_breakpoint.c:864:2: note: here case ARM_ENTRY_SYNC_WATCHPOINT: ^~~~ arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore': arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (oslsr & ARM_OSLSR_OSLM0) ^ arch/arm/kernel/hw_breakpoint.c:912:2: note: here default: ^~~~~~~ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
2019-08-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Bugfixes (arm and x86) and cleanups" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: selftests: kvm: Adding config fragments KVM: selftests: Update gitignore file for latest changes kvm: remove unnecessary PageReserved check KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable KVM: arm: Don't write junk to CP15 registers on reset KVM: arm64: Don't write junk to sysregs on reset KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block x86: kvm: remove useless calls to kvm_para_available KVM: no need to check return value of debugfs_create functions KVM: remove kvm_arch_has_vcpu_debugfs() KVM: Fix leak vCPU's VMCS value into other pCPU KVM: Check preempted_in_kernel for involuntary preemption KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire arm64: KVM: hyp: debug-sr: Mark expected switch fall-through KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC KVM: arm: vgic-v3: Mark expected switch fall-through arm64: KVM: regmap: Fix unexpected switch fall-through KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
2019-08-09KVM: arm: Don't write junk to CP15 registers on resetMarc Zyngier
At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-03ARM: dts: vf610-bk4: Fix qspi node descriptionLukasz Majewski
Before this change the device tree description of qspi node for second memory on BK4 board was wrong (applicable to old, removed fsl-quadspi.c driver). As a result this memory was not recognized correctly when used with the new spi-fsl-qspi.c driver. From the dt-bindings: "Required SPI slave node properties: - reg: There are two buses (A and B) with two chip selects each. This encodes to which bus and CS the flash is connected: <0>: Bus A, CS 0 <1>: Bus A, CS 1 <2>: Bus B, CS 0 <3>: Bus B, CS 1" According to above with new driver the second SPI-NOR memory shall have reg=<2> as it is connected to Bus B, CS 0. Fixes: a67d2c52a82f ("ARM: dts: Add support for Liebherr's BK4 device (vf610 based)") Suggested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-08-02Merge tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull arm swiotlb support from Christoph Hellwig: "This fixes a cascade of regressions that originally started with the addition of the ia64 port, but only got fatal once we removed most uses of block layer bounce buffering in Linux 4.18. The reason is that while the original i386/PAE code that was the first architecture that supported > 4GB of memory without an iommu decided to leave bounce buffering to the subsystems, which in those days just mean block and networking as no one else consumed arbitrary userspace memory. Later with ia64, x86_64 and other ports we assumed that either an iommu or something that fakes it up ("software IOTLB" in beautiful Intel speak) is present and that subsystems can rely on that for dealing with addressing limitations in devices. Except that the ARM LPAE scheme that added larger physical address to 32-bit ARM did not follow that scheme and thus only worked by chance and only for block and networking I/O directly to highmem. Long story, short fix - add swiotlb support to arm when build for LPAE platforms, which actuallys turns out to be pretty trivial with the modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression" * tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping: arm: use swiotlb for bounce buffering on LPAE configs dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}
2019-07-24arm: use swiotlb for bounce buffering on LPAE configsChristoph Hellwig
The DMA API requires that 32-bit DMA masks are always supported, but on arm LPAE configs they do not currently work when memory is present above 4GB. Wire up the swiotlb code like for all other architectures to provide the bounce buffering in that case. Fixes: 21e07dba9fb11 ("scsi: reduce use of block bounce buffers"). Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-07-24ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7Tony Lindgren
We are currently using a wrong register for dcan revision. Although this is currently only used for detecting the dcan module, let's fix it to avoid confusion. Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24ARM: dts: Fix flags for gpio7Tony Lindgren
The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-24ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmssTony Lindgren
TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when reset is completed. Let's configure it as otherwise we get warnings on boot when we check the data against dts provided data. Eventually the legacy platform data will be just dropped, but let's fix the warning first. Reviewed-by: Suman Anna <s-anna@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-07-23Merge tag 'imx-fixes-5.3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.3: - Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration. - Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation. - Fix typo of clock frequency property name in a few i.MX6UL board I2C buses. - Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible with i.MX6SX SAI. * tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: fix SAI compatible arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 ARM: dts: imx6ul: fix clock frequency property name of I2C buses ARM: dts: imx7ulp: Fix usb-phy unit address format Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: defconfig: u8500: Add new driversLinus Walleij
This enables the new or updates driver options for U8500 that got merged into v5.3-rc1: - CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver enabled by default bringing up the new graphics support. Include the LOGO so we can see when the graphics are live. - We use the IIO hwmon bridge for reflecting temperature in the system. - Set MUSB to PIO mode as this is the one working most stable for the time being. - HWSPINLOCK needs to be set to get the hardware semaphore driver to compile and link properly. Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: defconfig: u8500: Refresh defconfigLinus Walleij
This refreshes the outdated U8500 defconfig: some options moved around, PS/2 mouse is no longer default on, crypto options moved around etc. Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-muxArnd Bergmann
The mdio-bus-mux has no #address-cells/#size-cells property, which causes a few dtc warnings: arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value Add the normal cell numbers. Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de Fixes: 2bebdfcdcd0f ("ARM: dts: BCM5301X: Add support for Linksys EA9500") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-23ARM: davinci: fix sleep.S build error on ARMv4Arnd Bergmann
When building a multiplatform kernel that includes armv4 support, the default target CPU does not support the blx instruction, which leads to a build failure: arch/arm/mach-davinci/sleep.S: Assembler messages: arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode Add a .arch statement in the sources to make this file build. Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-22ARM: dts: imx6ul: fix clock frequency property name of I2C busesSébastien Szymanski
A few boards set clock frequency of their I2C buses with "clock_frequency" property. The right property is "clock-frequency". Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-21ARM: Delete netx a second timeLinus Walleij
Commit ceb02dcf676f ARM: delete netx machine deleted the mach-netx machine. Then eight days later it was resurrected by SPDX tag fixes. I think. Taking the liberty to fix some additional debug uart cruft. Link: https://lore.kernel.org/r/20190721224157.6597-1-linus.walleij@linaro.org Fixes: ceb02dcf676f ("ARM: delete netx machine") Acked-By: Robert Schwebel <r.schwebel@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-22ARM: dts: imx7ulp: Fix usb-phy unit address formatFabio Estevam
The following warning is seen when building with W=1: arch/arm/boot/dts/imx7ulp.dtsi:189.31-195.5: Warning (simple_bus_reg): /bus@40000000/usb-phy@0x40350000: simple-bus unit address format error, expected "40350000" Fix it as suggested by removing the extra "0x" notation. Fixes: 5b7bd456318a ("ARM: dts: imx7ulp: add imx7ulp USBOTG1 support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-07-20Merge tag 'kbuild-v5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - match the directory structure of the linux-libc-dev package to that of Debian-based distributions - fix incorrect include/config/auto.conf generation when Kconfig creates it along with the .config file - remove misleading $(AS) from documents - clean up precious tag files by distclean instead of mrproper - add a new coccinelle patch for devm_platform_ioremap_resource migration - refactor module-related scripts to read modules.order instead of $(MODVERDIR)/*.mod files to get the list of created modules - remove MODVERDIR - update list of header compile-test - add -fcf-protection=none flag to avoid conflict with the retpoline flags when CONFIG_RETPOLINE=y - misc cleanups * tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add -fcf-protection=none when using retpoline flags kbuild: update compile-test header list for v5.3-rc1 kbuild: split out *.mod out of {single,multi}-used-m rules kbuild: remove 'prepare1' target kbuild: remove the first line of *.mod files kbuild: create *.mod with full directory path and remove MODVERDIR kbuild: export_report: read modules.order instead of .tmp_versions/*.mod kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver kbuild: remove duplication from modules.order in sub-directories kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} kbuild: do not create empty modules.order in the prepare stage coccinelle: api: add devm_platform_ioremap_resource script kbuild: compile-test headers listed in header-test-m as well kbuild: remove unused hostcc-option kbuild: remove tag files by distclean instead of mrproper kbuild: add --hash-style= and --build-id unconditionally kbuild: get rid of misleading $(AS) from documents ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 02:13:33 +0000