summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2015-03-06ARM: dts: OMAP5: fix polling intervals for thermal zonesTero Kristo
OMAP4 has a finer counter granularity, which allows for a delay of 1000ms in the thermal zone polling intervals. OMAP5 has a different counter mechanism, which allows at maximum a 500ms timer. Adjust the cpu thermal zone polling interval accordingly. Without this patch, the polling interval information is simply ignored, and the following thermal warnings are printed during boot (assuming thermal is enabled); [ 1.545343] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.552691] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported [ 1.560029] ti-soc-thermal 4a0021e0.bandgap: Delay 1000 ms is not supported Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06ARM: dts: am335x-lxm: Use rmii-clock-extGeorge McCollister
Use external clock for RMII since the internal clock doesn't meet the jitter requirements. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06ARM: dts: am335x-bone-common: enable aes and shamMatt Porter
Beaglebone Black doesn't have AES and SHAM enabled like the original Beaglebone White dts. This breaks applications that leverage the crypto blocks so fix this by enabling these nodes in the am335x-bone-common.dtsi. With this change, enabling the nodes in am335x-bone.dts is no longer required so remove them. Signed-off-by: Matt Porter <mporter@konsulko.com> Acked-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06ARM: dts: am43xx-clocks: Fix ehrpwm tbclk data on am43xxVignesh R
ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck. The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the functional clock of pwmss (l4ls_gclk). Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk. Fixes: 4da1c67719f61 ("add tbclk data for ehrpwm") Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06ARM: dts: am33xx-clocks: Fix ehrpwm tbclk data on am33xxVignesh R
ehrpwm tbclk is wrongly modelled as deriving from dpll_per_m2_ck. The TRM says tbclk is derived from SYSCLKOUT. SYSCLKOUT nothing but the functional clock of pwmss (l4ls_gclk). Fix this by changing source of ehrpwmx_tbclk to l4ls_gclk. Fixes: 9e100ebafb91: ("Fix ehrpwm tbclk data") Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06ARM: dts: OMAP5: Fix the bypass clock source for dpll_iva and othersRavikumar Kattekola
Fixes 85dc74e9 (ARM: dts: omap5 clock data) On OMAP54xx, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock. But the bypass input is not directly routed to bypass clkout instead both CLKINP and CLKINPULOW are connected to bypass clkout via a mux. This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL and it's POR value is zero which selects the CLKINP as bypass clkout. which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck Fix this by adding another mux clock as parent in bypass mode. This design is common to most of the PLLs and the rest have only one bypass clock. Below is a list of the DPLLs that need this fix: DPLL_IVA, DPLL_PER, DPLL_USB and DPLL_CORE Signed-off-by: Ravikumar Kattekola <rk@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-06ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and othersRavikumar Kattekola
Fixes: ee6c750761 (ARM: dts: dra7 clock data) On DRA7x, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock. But the bypass input is not directly routed to bypass clkout instead both CLKINP and CLKINPULOW are connected to bypass clkout via a mux. This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL and it's POR value is zero which selects the CLKINP as bypass clkout. which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck Fix this by adding another mux clock as parent in bypass mode. This design is common to most of the PLLs and the rest have only one bypass clock. Below is a list of the DPLLs that need this fix: DPLL_IVA, DPLL_DDR, DPLL_DSP, DPLL_EVE, DPLL_GMAC, DPLL_PER, DPLL_USB and DPLL_CORE Signed-off-by: Ravikumar Kattekola <rk@ti.com> Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-05ARM: at91/pm: MOR register KEY was missingPatrice Vilchez
Because writing the MOR register requires the PASSWD(0x37), if missed, the write operation will be aborted. Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91/dt: sama5d4: fix lcdck clock definitionBoris BREZILLON
lcdck takes mck (not smd) as its parent. It is also assigned id 3 and not 4. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: squashed 2 related patches] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91/dt: sama5d4: rename lcd_clk into lcdc_clkBoris BREZILLON
Rename lcd_clk into lcdc_clk to be consistent with sama5d3 clock definitions. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-05ARM: at91: debug: fix non MMU debugAlexandre Belloni
Linux may be used without MMU on atmel SoCs, fix debug in this configuration. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: fix typos in smc91x platform dataArnd Bergmann
I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b70661c70830d ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-04ARM: multi_v7_defconfig: increase the number of maximum number of CPUs to 16Tyler Baker
The HiSilicon HiP04 has 16 CPUs. I propose we increase the maximum number of CPUs to 16 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x118/0x1e8() DT /cpu 9 nodes greater than max cores 8, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Hisilicon HiP04 (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x78/0x94) [] (dump_stack) from [] (warn_slowpath_common+0x74/0xb0) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x118/0x1e8) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x638/0x9a0) [] (setup_arch) from [] (start_kernel+0x8c/0x3b4) [] (start_kernel) from [<10208074>] (0x10208074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-multi_v7_defconfig/lab-tbaker/boot-hip04-d01.html Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-04ARM: sunxi_defconfig: increase the number of maximum number of CPUs to 8Tyler Baker
The a80 optimus has 8 CPUs. I propose we increase the maximum number of CPUs to 8 to avoid the following warning identified during automated boot testing [1]. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at ../arch/arm/kernel/devtree.c:144 arm_dt_init_cpu_maps+0x110/0x1e0() DT /cpu 5 nodes greater than max cores 4, capping them CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-00528-gbdccc4edeb03 #1 Hardware name: Allwinner sun9i Family [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (dump_stack+0x74/0x90) [] (dump_stack) from [] (warn_slowpath_common+0x70/0xac) [] (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) [] (warn_slowpath_fmt) from [] (arm_dt_init_cpu_maps+0x110/0x1e0) [] (arm_dt_init_cpu_maps) from [] (setup_arch+0x634/0x8d4) [] (setup_arch) from [] (start_kernel+0x88/0x3ac) [] (start_kernel) from [<20008074>] (0x20008074) ---[ end trace cb88537fdc8fa200 ]--- [1] http://storage.kernelci.org/mainline/v3.19-528-gbdccc4edeb03/arm-sunxi_defconfig/lab-tbaker/boot-sun9i-a80-optimus.html Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Olof Johansson <olof@lixom.net> Cc: Kevin Hilman <khilman@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-04Merge tag 'at91-fixes' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes Merge "First fixes batch for AT91 on 4.0" from Nicolas Ferre: - PM slowclock fixes for DDR and timeouts - fix some DT entries - little defconfig updates - the removal of a harmful watchdog option + its detailed documentation * tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: keep watchdog running in idle mode dts: Documentation: AT91 Watchdog, explain what atmel,idle-halt property really do ARM: at91/defconfig: add at91rm9200 ethernet support ARM: at91/defconfig: remove CONFIG_SYSFS_DEPRECATED ARM: at91/dt: at91sam9260: fix usart pinctrl ARM: at91/dt: sama5d4: add missing alias for i2c0 ARM: at91/dt: at91sam9263: Fixup sram1 device tree node ARM: at91: pm: fix SRAM allocation ARM: at91: pm: fix at91rm9200 standby pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories. pm: at91: pm_slowclock: fix suspend/resume hang up in timeouts
2015-03-04Merge tag 'samsung-fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fixes for v4.0" from Kukjin Kim: * tag samsung-fixes-1: ARM: EXYNOS: Fix wrong hwirq of RTC interrupt for Exynos3250 SoC ARM: EXYNOS: Don't use LDREX and STREX after disabling cache coherency
2015-03-04Merge tag 'samsung-fixes-dt' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung tmu and hdmi regression fixes for v4.0" from Kukjin Kim: - The thermal management unit and HDMI (drm mixer driver) related reworks have been merged in v4.0 merge window. So if this DT changes are missed for v4.0, we regressions in v4.0 release for exynos platforms such as exynos5250, exynos5420, exynos4 SoCs. - Note since there was a dependency with driver side, this cannot be sent to upstream during preivous merge window and now it has been resolved. * tag 'samsung-fixes-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: add display power domain for exynos5250 ARM: dts: add 'hdmi' clock to mixer nodes for exynos5250 and exynos5420 ARM: dts: enable hdmi support for exynos4210-universal_c210 ARM: dts: enable hdmi support for exynos4412-odroid-common ARM: dts: add dependency between TV and LCD0 power domains for exynos4 ARM: dts: add hdmi related nodes for exynos4 SoCs ARM: EXYNOS: add support for sub-power domains dt-bindings: document a note about power domain subdomains ARM: dts: Provide dt bindings identical for Exynos TMU ARM: dts: Trip points and sensor configuration data for exynos5440 ARM: dts: define default thermal-zones for exynos4 ARM: dts: default trip points definition for exynos5420 ARM: dts: add TMU default definitions for exynos4412 ARM: dts: Adding CPU cooling binding for Exynos SoCs ARM: dts: Enable TMU for exynos4412-odriod-common ARM: dts: Add LDO10 for TMU for exynos4412-odroid-common ARM: dts: Enable TMU for exynos4210-trats
2015-03-04ARM: socfpga: make sure socfpga_cpu1start_addr is properly flushedRussell King
Make sure socfpga_cpu1start_addr is properly flushed from it's cache line so that secondary cpu's can see it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-04ARM: socfpga: fix uart DMA binding errorSteffen Trumtrar
socfpga.dtsi is missing the DMA channels for the uart nodes. This will produce the following errors: of_dma_request_slave_channel: dma-names property of node '/soc/serial0@ffc02000' missing or empty ttyS0 - failed to request DMA Provide the correct DMA channels to fix this. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-04ARM: socfpga: Correct SCU virtual mapping in socfpgaVince Bridgers
Correct SCU virtual mapping that was causing this BUG message: "BUG: mapping for 0xfffec000 at 0xfffec000 out of vmalloc space" Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-03-04Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Marcelo Tosatti: "KVM bug fixes, including a SVM interrupt injection regression fix, MIPS and ARM bug fixes" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MIPS: Enable after disabling interrupt KVM: MIPS: Fix trace event to save PC directly KVM: SVM: fix interrupt injection (apic->isr_count always 0) KVM: emulate: fix CMPXCHG8B on 32-bit hosts KVM: VMX: fix build without CONFIG_SMP arm/arm64: KVM: Add exit reaons to kvm_exit event tracing ARM: KVM: Fix size check in __coherent_cache_guest_page
2015-03-04ARM: at91/dt: keep watchdog running in idle modeMichel Marti
Since turning on idle-halt in commit fe46aa679f12 (ARM: at91/dt: add sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt no longer reboot if the watchdog times out while the CPU is in idle state. Removing the 'idle-halt' flag that was set by default fixes this. Signed-off-by: Michel Marti <mma@objectxp.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com> [nicolas.ferre@atmel.com: rework the commit message] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/defconfig: add at91rm9200 ethernet supportAlexandre Belloni
There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet support for the at91rm9200. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/defconfig: remove CONFIG_SYSFS_DEPRECATEDAnthony Harivel
Recent distributions and userspace tools after 2009/2010 depend on the existence of /sys/class/block/, and will not work with this option enabled. Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-04ARM: at91/dt: at91sam9260: fix usart pinctrlJonas Andersson
Corrected pins used by usart3. Signed-off-by: Jonas Andersson <jonas@microbit.se> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ...
2015-03-03ARM: at91/dt: sama5d4: add missing alias for i2c0Nicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91/dt: at91sam9263: Fixup sram1 device tree nodeAlexander Stein
Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base address for sram0 and sram1 leading to the following warning: WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70() sysfs: cannot create duplicate filename '/devices/platform/300000.sram' Fix the base address for sram1. Signed-off-by: Alexander Stein <alexanders83@web.de> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91: pm: fix SRAM allocationAlexandre Belloni
On some platforms, there are multiple SRAM nodes defined in the device tree but some of them are disabled, leading to allocation failure. Try to find the first enabled SRAM node and allocate from it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03ARM: at91: pm: fix at91rm9200 standbyAlexandre Belloni
at91rm9200 standby and suspend to ram has been broken since 00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address and actually doesn't correspond to any register on at91rm9200. Use the correct at91_ramc_base[0] instead. Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle) Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03pm: at91: Workaround DDRSDRC self-refresh bug with LPDDR1 memories.Peter Rosin
The DDRSDR controller fails miserably to put LPDDR1 memories in self-refresh. Force the controller to think it has DDR2 memories during the self-refresh period, as the DDR2 self-refresh spec is equivalent to LPDDR1, and is correctly implemented in the controller. Assume that the second controller has the same fault, but that is untested. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-03pm: at91: pm_slowclock: fix suspend/resume hang up in timeoutsSylvain Rochet
Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if something went wrong instead of continuing in unknown condition. There is not much we can do if a PLL lock never ends, we are running in SRAM and we will not be able to connect back the sdram or ddram in order to be able to fire up a message or just panic. As a bonus, not decounting the timeout register in slow clock mode reduce cumulated suspend time and resume time from ~17ms to ~15ms. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Acked-by: Wenyou.Yang <wenyou.yang@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-03-02crypto: arm/aes update NEON AES module to latest OpenSSL versionArd Biesheuvel
This updates the bit sliced AES module to the latest version in the upstream OpenSSL repository (e620e5ae37bc). This is needed to fix a bug in the XTS decryption path, where data chunked in a certain way could trigger the ciphertext stealing code, which is not supposed to be active in the kernel build (The kernel implementation of XTS only supports round multiples of the AES block size of 16 bytes, whereas the conformant OpenSSL implementation of XTS supports inputs of arbitrary size by applying ciphertext stealing). This is fixed in the upstream version by adding the missing #ifndef XTS_CHAIN_TWEAK around the offending instructions. The upstream code also contains the change applied by Russell to build the code unconditionally, i.e., even if __LINUX_ARM_ARCH__ < 7, but implemented slightly differently. Cc: stable@vger.kernel.org Fixes: e4e7f10bfc40 ("ARM: add support for bit sliced AES using NEON instructions") Reported-by: Adrian Kotelba <adrian.kotelba@gmail.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-03-01ARM: OMAP4+: PRM: fix omap4 version of prm_save_and_clear_irqenTero Kristo
This was incorrectly reading the irq status registers during the save and clear, instead of the irq enable. This worked because there is only one user for the prcm interrupts currently, namely the io-chain. Whenever the function was called, an io-chain interrupt was both pending and enabled. Signed-off-by: Tero Kristo <t-kristo@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-03-01ARM: OMAP2+: hwmod: fix deassert hardreset clkdm usecountingTero Kristo
Deasserting hardreset increases the usecount for the hwmod parent clockdomain always, however usecount is only decreased at end in certain error cases. This causes software supervised clockdomains to remain always on, preventing idle. Fixed by always releasing the hwmods clockdomain parent when exiting the function. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Carlos Hernandez <ceh@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2015-03-01Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three clockevents/clocksource driver fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: pxa: Fix section mismatch clocksource: mtk: Fix race conditions in probe code clockevents: asm9260: Fix compilation error with sparc/sparc64 allyesconfig
2015-02-28net: smc91x: use run-time configuration on all ARM machinesArnd Bergmann
The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: Arnd Bergmann <arnd@arndb.de> ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27ARM: EXYNOS: Fix wrong hwirq of RTC interrupt for Exynos3250 SoCChanwoo Choi
This patch fixes wrong hwirq of RTC irq for Exynos3250 SoC. When entering suspend state, 'enable_irq_wake fail' happen because of the mismatch of RTC hwirq. [ 429.200937] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 429.203383] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 429.209914] Suspending console(s) (use no_console_suspend to debug) [ 429.370685] wake enabled for irq 65 [ 429.370837] wake enabled for irq 64 [ 429.370868] wake enabled for irq 79 ... [ 429.372120] s3c-rtc 10070000.rtc: enable_irq_wake failed Fixes: a4f582f5c5fe3 (ARM: EXYNOS: Add exynos3250 suspend-to-ram support) Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: EXYNOS: Don't use LDREX and STREX after disabling cache coherencyKrzysztof Kozlowski
During CPU shutdown the exynos_cpu_power_down() is called after disabling cache coherency and it uses LDREX and STREX instructions (by calling of_machine_is_compatible() -> kobject_get() -> kref_get()). The LDREX and STREX should not be used after disabling the cache coherency so just use soc_is_exynos(). Fixes: adc548d77c22 ("ARM: EXYNOS: Use MCPM call-backs to support S2R on exynos5420") Reported-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: <stable@vger.kernel.org> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: add display power domain for exynos5250Andrzej Hajda
The patch adds domain definition and references to it in appropriate devices. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> [mszyprow: rebased onto generic power domains dt bindings] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: add 'hdmi' clock to mixer nodes for exynos5250 and exynos5420Marek Szyprowski
Mixed block needs to control hdmi clock to properly perform power on/off operation, so add 'hdmi' clock also to mixer nodes. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: enable hdmi support for exynos4210-universal_c210Tomasz Stanislawski
This patch adds configuration of hw modules required to enable HDMI support on Universal C210 board. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: enable hdmi support for exynos4412-odroid-commonMarek Szyprowski
This patch adds nodes specific to Exynos4412 based Odroid X/X2/U2/U3 boards required for enabling HDMI display. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: add dependency between TV and LCD0 power domains for exynos4Marek Szyprowski
TV Mixer needs both TV and LCD0 domains enabled to be fully operational. This dependency is modelled by making TV power domains a sub-domain of LCD0 power domain. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: add hdmi related nodes for exynos4 SoCsMarek Szyprowski
This patch adds entries for HDMI, Mixer and i2c with hdmi-phy modules found in Exynos 4210 and 4x12 SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: EXYNOS: add support for sub-power domainsMarek Szyprowski
This patch adds support for making one power domain a sub-domain of other domain. This is useful for modeling power dependences for devices like TV Mixer or Camera ISP, which needs to have more than one power domain enabled to be operational. Based on previous work by Amit Daniel Kachhap <amit.daniel@samsung.com>. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: Provide dt bindings identical for Exynos TMULukasz Majewski
Presented device tree bindings provide data already hardcoded in the exynos_tmu_data.c file. After this commit, it should be possible to reuse common thermal core framework in Exynos SoCs. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: Trip points and sensor configuration data for exynos5440Lukasz Majewski
This commit provides information about Exynos5440 device configuration. Previously this information was available in exynos_tmu_data.c file. Now it is available in the device tree. Such approach allows reusing some common code for thermal. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: define default thermal-zones for exynos4Lukasz Majewski
Trip points corresponding to the one defined in the exynos_tmu_data.c for Exynos4 have been included. This thermal-zones attribute is afterwards reused for Exynos4210, Exynos4412 and Exynos5250. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-02-27ARM: dts: default trip points definition for exynos5420Lukasz Majewski
This code groups in one place default settings of trip points. It is used in SoCs with multiple instances of TMU sensor. Separate device tree file prevents from multiple copying of the same data. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 21:32:43 +0000