summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2020-10-30Merge tag 'arm-soc-fixes-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a fairly large set of bug fixes on top of -rc1, as most of them were ready but didn't quite make it into the last-minute pull requests for the merge window. Allwinner: - fix for incorrect CPU overtemperature limit Amlogic: - multiple smaller DT bugfixes, and missing device nodes Marvell EBU: - add missing aliases for ethernet switch ports on espressobin board Marvell MMP: - DTC warning fix - bugfix for camera interface power-down NXP i.MX: - re-enable the GPIO driver on all defconfigs ST STM32MP1: - fix random crashes from incorrect voltage settings Synaptics Berlin: - enable the correct hardware timer driver Texas Instruments K2G: - fix a boot regression in the power domain code TEE drivers: - fix regression in TEE "login" method SCMI drivers: - multiple code fixes for corner cases in newly added code MAINTAINERS file: - move Kukjin Kim and Sangbeom Kim to credits (used to work on Samsung Exynos) - Masahiro Yamada is stepping down as Uniphier maintainer I did not include a series of patches that work around a regression caused by a bugfix in an ethernet phy driver that resulted in an inadvertent DT binding change. This is still under discussion" * tag 'arm-soc-fixes-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: ti: ti_sci_pm_domains: check for proper args count in xlate ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios" ARM: dts: mmp3: Add power domain for the camera arm64: berlin: Select DW_APB_TIMER_OF dt-bindings: sram: sunxi-sram: add V3s compatible string MAINTAINERS: Move Sangbeom Kim to credits MAINTAINERS: Move Kukjin Kim to credits MAINTAINERS: step down as maintainer of UniPhier SoCs and Denali driver ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default arm64: defconfig: Build in CONFIG_GPIO_MXC by default arm64: dts: meson: odroid-n2 plus: fix vddcpu_a pwm ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: amlogic: add missing ethernet reset ID firmware: arm_scmi: Fix duplicate workqueue name firmware: arm_scmi: Fix locking in notifications ...
2020-10-28Merge tag 'stm32-dt-for-v5.10-fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 1 Highlights: ----------- -On STM32MP157 DK & ED boards: Add Vin supply description to avoid random kernel crash due to vref_ddr regulator issue. * tag 'stm32-dt-for-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx board ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx board Link: https://lore.kernel.org/r/4ac236b3-b980-f653-f644-53e586570724@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-28ARM: dts: stm32: Describe Vin power supply on stm32mp157c-edx boardPascal Paillet
Add description for Vin power supply and for peripherals that are supplied by Vin. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-10-28ARM: dts: stm32: Describe Vin power supply on stm32mp15xx-dkx boardPascal Paillet
Add description for Vin power supply and for peripherals that are supplied by Vin. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-10-27arm/build: Always handle .ARM.exidx and .ARM.extab sectionsNathan Chancellor
After turning on warnings for orphan section placement, enabling CONFIG_UNWINDER_FRAME_POINTER instead of CONFIG_UNWINDER_ARM causes thousands of warnings when clang + ld.lld are used: $ scripts/config --file arch/arm/configs/multi_v7_defconfig \ -d CONFIG_UNWINDER_ARM \ -e CONFIG_UNWINDER_FRAME_POINTER $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 defconfig zImage ld.lld: warning: init/built-in.a(main.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.ref.text) is being placed in '.ARM.extab.ref.text' ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(do_mounts_initrd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab) is being placed in '.ARM.extab' These sections are handled by the ARM_UNWIND_SECTIONS define, which is only added to the list of sections when CONFIG_ARM_UNWIND is set. CONFIG_ARM_UNWIND is a hidden symbol that is only selected when CONFIG_UNWINDER_ARM is set so CONFIG_UNWINDER_FRAME_POINTER never handles these sections. According to the help text of CONFIG_UNWINDER_ARM, these sections should be discarded so that the kernel image size is not affected. Fixes: 5a17850e251a ("arm/build: Warn on orphan section placement") Link: https://github.com/ClangBuiltLinux/linux/issues/1152 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Review-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> [kees: Made the discard slightly more specific] Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200928224854.3224862-1-natechancellor@gmail.com
2020-10-27Merge tag 'imx-fixes-5.10-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 2nd round: A couple of more defconfig fixes to enable CONFIG_GPIO_MXC option for i.MX ARMv4/v5 devices. * tag 'imx-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXC ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXC Link: https://lore.kernel.org/r/20201026235230.GL9880@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-27ARM: multi_v5_defconfig: Select CONFIG_GPIO_MXCFabio Estevam
Since commit 12d16b397ce0 ("gpio: mxc: Support module build") the CONFIG_GPIO_MXC option needs to be explicitly selected. Select it to avoid boot issues on imx25/imx27 due to the lack of the GPIO driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-27ARM: imx_v4_v5_defconfig: Select CONFIG_GPIO_MXCFabio Estevam
Since commit 12d16b397ce0 ("gpio: mxc: Support module build") the CONFIG_GPIO_MXC option needs to be explicitly selected. Select it to avoid boot issues on imx25/imx27 due to the lack of the GPIO driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26Merge tag 'imx-fixes-5.10' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10: With commit 12d16b397ce0 ("gpio: mxc: Support module build") in place, GPIO_MXC has no 'def_bool y' anymore, and needs to be enabled by defconfig. It updates the defconfig files to explicitly enable the option for fixing boot failure on i.MX platform. * tag 'imx-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by default ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by default arm64: defconfig: Build in CONFIG_GPIO_MXC by default Link: https://lore.kernel.org/r/20201026135601.GA32675@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"Lubomir Rintel
This makes validation happier. Link: https://lore.kernel.org/r/20200925234805.228251-3-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26ARM: dts: mmp3: Add power domain for the cameraLubomir Rintel
The camera interfaces on MMP3 are on a separate power island that needs to be turned on for them to operate and, ideally, turned off when the cameras are not in use. This hooks the power island with the camera interfaces in the device tree. Link: https://lore.kernel.org/r/20200925234805.228251-2-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26Merge tag 'sunxi-fixes-for-5.9-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for an unreasonable thermal trip point on the A10 * tag 'sunxi-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun4i-a10: fix cpu_alert temperature Link: https://lore.kernel.org/r/3c95a95f-c6fa-4b34-823b-ddaa7660d274.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26Merge tag 'mvebu-fixes-5.9-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.9 (part 1) - Allow to use correct MAC address for particular DSA slaves / ethernet ports on Espressobin (Armada 3720) - Remove incorrect check in ll_get_coherency_base() used for Armada 370/XP SoCs. * tag 'mvebu-fixes-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: mvebu: drop pointless check for coherency_base arm64: dts: marvell: espressobin: Add ethernet switch aliases Link: https://lore.kernel.org/r/87y2kkesj5.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26ARM: multi_v7_defconfig: Build in CONFIG_GPIO_MXC by defaultAnson Huang
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations and IRQ operations, it is now changed from "def_bool y" to "tristate", so it should be explicitly enabled to make sure all consumers work normally. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-26ARM: imx_v6_v7_defconfig: Build in CONFIG_GPIO_MXC by defaultAnson Huang
i.MX SoC GPIO driver provides the basic functions of GPIO pin operations and IRQ operations, it is now changed from "def_bool y" to "tristate", so it should be explicitly enabled to make sure all consumers work normally. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping fixes from Christoph Hellwig: - document the new dma_{alloc,free}_pages() API - two fixups for the dma-mapping.h split * tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: document dma_{alloc,free}_pages dma-mapping: move more functions to dma-map-ops.h ARM/sa1111: add a missing include of dma-map-ops.h
2020-10-24Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits) ARM: multi_v7_defconfig: add FMC2 EBI controller support arm64: defconfig: enable Qualcomm ASoC modules arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50 arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets arm64: defconfig: enable the sl28cpld board management controller arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers arm64: defconfig: Enable Qcom SNPS Femto PHY ARM: configs: Update Realview defconfig ARM: configs: Update Versatile defconfig ARM: config: aspeed_g5: Enable IBM OP Panel driver ARM: config: aspeed-g5: Enable I2C GPIO mux driver ARM: config: aspeed: Fix selection of media drivers arm64: defconfig: Enable Samsung S3FWRN5 NFC driver ARM: omap2plus_defconfig: enable generic net options ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC arm64: defconfig: Build ADMA and ACONNECT driver arm64: defconfig: Build AHUB component drivers arm64: defconfig: Enable Lontium LT9611 driver arm64: defcondfig: Enable USB ACM and FTDI drivers ...
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()
2020-10-23Merge tag 'pm-5.10-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "First of all, the adaptive voltage scaling (AVS) drivers go to new platform-specific locations as planned (this part was reported to have merge conflicts against the new arm-soc updates in linux-next). In addition to that, there are some fixes (intel_idle, intel_pstate, RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state accounting support to the generic power domains (genpd) code and some janitorial changes all over. Specifics: - Move the AVS drivers to new platform-specific locations and get rid of the drivers/power/avs directory (Ulf Hansson). - Add on/off notifiers and idle state accounting support to the generic power domains (genpd) framework (Ulf Hansson, Lina Iyer). - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson). - Make intel_idle disregard ACPI _CST if it cannot use the data returned by that method (Mel Gorman). - Modify intel_pstate to avoid leaving useless sysfs directory structure behind if it cannot be registered (Chen Yu). - Fix domain detection in the RAPL power capping driver and prevent it from failing to enumerate the Psys RAPL domain (Zhang Rui). - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and later AMD chips (Wei Huang). - Update the driver assumptions comment in intel_idle and fix a kerneldoc comment in the runtime PM framework (Alexander Monakov, Bean Huo). - Avoid unnecessary resets of the cached frequency in the schedutil cpufreq governor to reduce overhead (Wei Wang). - Clean up the cpufreq core a bit (Viresh Kumar). - Make assorted minor janitorial changes (Daniel Lezcano, Geert Uytterhoeven, Hubert Jasudowicz, Tom Rix). - Clean up and optimize the cpupower utility somewhat (Colin Ian King, Martin Kaistra)" * tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM: sleep: remove unreachable break PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: runtime: Fix typo in pm_runtime_set_active() helper comment PM: domains: Fix build error for genpd notifiers powercap: Fix typo in Kconfig "Plance" -> "Plane" cpufreq: schedutil: restore cached freq when next_f is not changed acpi-cpufreq: Honor _PSD table setting on new AMD CPUs PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers PM: domains: enable domain idle state accounting PM: domains: Add curly braces to delimit comment + statement block PM: domains: Add support for PM domain on/off notifiers for genpd powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection intel_idle: Ignore _CST if control cannot be taken from the platform cpuidle: Remove pointless stub intel_idle: mention assumption that WBINVD is not needed MAINTAINERS: Add section for cpuidle-psci PM domain cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver ...
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-23Merge tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull arch task_work cleanups from Jens Axboe: "Two cleanups that don't fit other categories: - Finally get the task_work_add() cleanup done properly, so we don't have random 0/1/false/true/TWA_SIGNAL confusing use cases. Updates all callers, and also fixes up the documentation for task_work_add(). - While working on some TIF related changes for 5.11, this TIF_NOTIFY_RESUME cleanup fell out of that. Remove some arch duplication for how that is handled" * tag 'arch-cleanup-2020-10-22' of git://git.kernel.dk/linux-block: task_work: cleanup notification modes tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()
2020-10-22Merge tag 'kbuild-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ...
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-20Merge tag 'for-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add wireless type - properly document current direction Battery/charger driver changes: - new fuel-gauge/charger driver for RN5T618/RN5T619 - new charger driver for BQ25980, BQ25975 and BQ25960 - bq27xxx-battery: add support for TI bq34z100 - gpio-charger: convert to GPIO descriptors - gpio-charger: add optional support for charge current limiting - max17040: add support for max17041, max17043, max17044 - max17040: add support for max17048, max17049, max17058, max17059 - smb347-charger: add DT support - smb247-charger: add SMB345 and SMB358 support - simple-battery: add temperature properties - lots of minor fixes, cleanups and DT binding YAML conversions Reset drivers: - ocelot: Add support for Sparx5" * tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits) power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5 power: supply: bq25980: Fix uninitialized wd_reg_val and overrun power: supply: ltc2941: Fix ptr to enum cast power: supply: test-power: revise parameter printing to use sprintf power: supply: charger-manager: fix incorrect check on charging_duration_ms power: supply: max17040: Fix ptr to enum cast power: supply: bq25980: Fix uninitialized wd_reg_val power: supply: bq25980: remove redundant zero check on ret power: reset: ocelot: Add support for Sparx5 dt-bindings: reset: ocelot: Add Sparx5 support power: supply: sbs-battery: keep error code when get_property() fails power: supply: bq25980: Add support for the BQ259xx family dt-binding: bq25980: Add the bq25980 flash charger power: supply: fix spelling mistake "unprecise" -> "imprecise" power: supply: test_power: add missing newlines when printing parameters by sysfs power: supply: pm2301: drop duplicated i2c_device_id power: supply: charger-manager: drop unused charger assignment power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI ...
2020-10-20Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: - handle inexact watchpoint addresses (Douglas Anderson) - decompressor serial debug cleanups (Linus Walleij) - update L2 cache prefetch bits (Guillaume Tucker) - add text offset and malloc size to the decompressor kexec data * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add malloc size to decompressor kexec size structure ARM: add TEXT_OFFSET to decompressor kexec image structure ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values ARM: 9010/1: uncompress: Print the location of appended DTB ARM: 9009/1: uncompress: Enable debug in head.S ARM: 9008/1: uncompress: Drop excess whitespace print ARM: 9006/1: uncompress: Wait for ready and busy in debug prints ARM: 9005/1: debug: Select flow control for all debug UARTs ARM: 9004/1: debug: Split waituart to CTS and TXRDY ARM: 9003/1: uncompress: Delete unused debug macros ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses
2020-10-20ARM/sa1111: add a missing include of dma-map-ops.hChristoph Hellwig
Ensure the dmabounce functions are available for all Kconfig permutations. Fixes: 0a0f0d8be76d ("dma-mapping: split <linux/dma-mapping.h>") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-10-18mm: remove duplicate include statement in mmu.cTian Tao
asm/sections.h is included more than once, Remove the one that isn't necessary. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lkml.kernel.org/r/1600088607-17327-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-18mm/madvise: introduce process_madvise() syscall: an external memory hinting APIMinchan Kim
There is usecase that System Management Software(SMS) want to give a memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the case of Android, it is the ActivityManagerService. The information required to make the reclaim decision is not known to the app. Instead, it is known to the centralized userspace daemon(ActivityManagerService), and that daemon must be able to initiate reclaim on its own without any app involvement. To solve the issue, this patch introduces a new syscall process_madvise(2). It uses pidfd of an external process to give the hint. It also supports vector address range because Android app has thousands of vmas due to zygote so it's totally waste of CPU and power if we should call the syscall one by one for each vma.(With testing 2000-vma syscall vs 1-vector syscall, it showed 15% performance improvement. I think it would be bigger in real practice because the testing ran very cache friendly environment). Another potential use case for the vector range is to amortize the cost ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could benefit users like TCP receive zerocopy and malloc implementations. In future, we could find more usecases for other advises so let's make it happens as API since we introduce a new syscall at this moment. With that, existing madvise(2) user could replace it with process_madvise(2) with their own pid if they want to have batch address ranges support feature. ince it could affect other process's address range, only privileged process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same UID) gives it the right to ptrace the process could use it successfully. The flag argument is reserved for future use if we need to extend the API. I think supporting all hints madvise has/will supported/support to process_madvise is rather risky. Because we are not sure all hints make sense from external process and implementation for the hint may rely on the caller being in the current context so it could be error-prone. Thus, I just limited hints as MADV_[COLD|PAGEOUT] in this patch. If someone want to add other hints, we could hear the usecase and review it for each hint. It's safer for maintenance rather than introducing a buggy syscall but hard to fix it later. So finally, the API is as follows, ssize_t process_madvise(int pidfd, const struct iovec *iovec, unsigned long vlen, int advice, unsigned int flags); DESCRIPTION The process_madvise() system call is used to give advice or directions to the kernel about the address ranges from external process as well as local process. It provides the advice to address ranges of process described by iovec and vlen. The goal of such advice is to improve system or application performance. The pidfd selects the process referred to by the PID file descriptor specified in pidfd. (See pidofd_open(2) for further information) The pointer iovec points to an array of iovec structures, defined in <sys/uio.h> as: struct iovec { void *iov_base; /* starting address */ size_t iov_len; /* number of bytes to be advised */ }; The iovec describes address ranges beginning at address(iov_base) and with size length of bytes(iov_len). The vlen represents the number of elements in iovec. The advice is indicated in the advice argument, which is one of the following at this moment if the target process specified by pidfd is external. MADV_COLD MADV_PAGEOUT Permission to provide a hint to external process is governed by a ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2). The process_madvise supports every advice madvise(2) has if target process is in same thread group with calling process so user could use process_madvise(2) to extend existing madvise(2) to support vector address ranges. RETURN VALUE On success, process_madvise() returns the number of bytes advised. This return value may be less than the total number of requested bytes, if an error occurred. The caller should check return value to determine whether a partial advice occurred. FAQ: Q.1 - Why does any external entity have better knowledge? Quote from Sandeep "For Android, every application (including the special SystemServer) are forked from Zygote. The reason of course is to share as many libraries and classes between the two as possible to benefit from the preloading during boot. After applications start, (almost) all of the APIs end up calling into this SystemServer process over IPC (binder) and back to the application. In a fully running system, the SystemServer monitors every single process periodically to calculate their PSS / RSS and also decides which process is "important" to the user for interactivity. So, because of how these processes start _and_ the fact that the SystemServer is looping to monitor each process, it does tend to *know* which address range of the application is not used / useful. Besides, we can never rely on applications to clean things up themselves. We've had the "hey app1, the system is low on memory, please trim your memory usage down" notifications for a long time[1]. They rely on applications honoring the broadcasts and very few do. So, if we want to avoid the inevitable killing of the application and restarting it, some way to be able to tell the OS about unimportant memory in these applications will be useful. - ssp Q.2 - How to guarantee the race(i.e., object validation) between when giving a hint from an external process and get the hint from the target process? process_madvise operates on the target process's address space as it exists at the instant that process_madvise is called. If the space target process can run between the time the process_madvise process inspects the target process address space and the time that process_madvise is actually called, process_madvise may operate on memory regions that the calling process does not expect. It's the responsibility of the process calling process_madvise to close this race condition. For example, the calling process can suspend the target process with ptrace, SIGSTOP, or the freezer cgroup so that it doesn't have an opportunity to change its own address space before process_madvise is called. Another option is to operate on memory regions that the caller knows a priori will be unchanged in the target process. Yet another option is to accept the race for certain process_madvise calls after reasoning that mistargeting will do no harm. The suggested API itself does not provide synchronization. It also apply other APIs like move_pages, process_vm_write. The race isn't really a problem though. Why is it so wrong to require that callers do their own synchronization in some manner? Nobody objects to write(2) merely because it's possible for two processes to open the same file and clobber each other's writes --- instead, we tell people to use flock or something. Think about mmap. It never guarantees newly allocated address space is still valid when the user tries to access it because other threads could unmap the memory right before. That's where we need synchronization by using other API or design from userside. It shouldn't be part of API itself. If someone needs more fine-grained synchronization rather than process level, there were two ideas suggested - cookie[2] and anon-fd[3]. Both are applicable via using last reserved argument of the API but I don't think it's necessary right now since we have already ways to prevent the race so don't want to add additional complexity with more fine-grained optimization model. To make the API extend, it reserved an unsigned long as last argument so we could support it in future if someone really needs it. Q.3 - Why doesn't ptrace work? Injecting an madvise in the target process using ptrace would not work for us because such injected madvise would have to be executed by the target process, which means that process would have to be runnable and that creates the risk of the abovementioned race and hinting a wrong VMA. Furthermore, we want to act the hint in caller's context, not the callee's, because the callee is usually limited in cpuset/cgroups or even freezed state so they can't act by themselves quick enough, which causes more thrashing/kill. It doesn't work if the target process are ptraced(e.g., strace, debugger, minidump) because a process can have at most one ptracer. [1] https://developer.android.com/topic/performance/memory" [2] process_getinfo for getting the cookie which is updated whenever vma of process address layout are changed - Daniel Colascione - https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224 [3] anonymous fd which is used for the object(i.e., address range) validation - Michal Hocko - https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/ [minchan@kernel.org: fix process_madvise build break for arm64] Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com [minchan@kernel.org: fix build error for mips of process_madvise] Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com [akpm@linux-foundation.org: fix patch ordering issue] [akpm@linux-foundation.org: fix arm64 whoops] [minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian] [akpm@linux-foundation.org: fix i386 build] [sfr@canb.auug.org.au: fix syscall numbering] Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au [sfr@canb.auug.org.au: madvise.c needs compat.h] Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au [minchan@kernel.org: fix mips build] Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com [yuehaibing@huawei.com: remove duplicate header which is included twice] Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com [minchan@kernel.org: do not use helper functions for process_madvise] Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com [akpm@linux-foundation.org: pidfd_get_pid() gained an argument] [sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"] Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <christian@brauner.io> Cc: Daniel Colascione <dancol@google.com> Cc: Jann Horn <jannh@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Dias <joaodias@google.com> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksandr Natalenko <oleksandr@redhat.com> Cc: Sandeep Patil <sspatil@google.com> Cc: SeongJae Park <sj38.park@gmail.com> Cc: SeongJae Park <sjpark@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Sonny Rao <sonnyrao@google.com> Cc: Tim Murray <timmurray@google.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: <linux-man@vger.kernel.org> Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-17tracehook: clear TIF_NOTIFY_RESUME in tracehook_notify_resume()Jens Axboe
All the callers currently do this, clean it up and move the clearing into tracehook_notify_resume() instead. Reviewed-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-17Merge tag 'mtd/for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...
2020-10-16PM: AVS: smartreflex Move driver to soc specific driversUlf Hansson
The avs drivers are all SoC specific drivers that doesn't share any code. Instead they are located in a directory, mostly to keep similar functionality together. From a maintenance point of view, it makes better sense to collect SoC specific drivers like these, into the SoC specific directories. Therefore, let's move the smartreflex driver for OMAP to the ti directory. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-15Merge tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull dma-mapping updates from Christoph Hellwig: - rework the non-coherent DMA allocator - move private definitions out of <linux/dma-mapping.h> - lower CMA_ALIGNMENT (Paul Cercueil) - remove the omap1 dma address translation in favor of the common code - make dma-direct aware of multiple dma offset ranges (Jim Quinlan) - support per-node DMA CMA areas (Barry Song) - increase the default seg boundary limit (Nicolin Chen) - misc fixes (Robin Murphy, Thomas Tai, Xu Wang) - various cleanups * tag 'dma-mapping-5.10' of git://git.infradead.org/users/hch/dma-mapping: (63 commits) ARM/ixp4xx: add a missing include of dma-map-ops.h dma-direct: simplify the DMA_ATTR_NO_KERNEL_MAPPING handling dma-direct: factor out a dma_direct_alloc_from_pool helper dma-direct check for highmem pages in dma_direct_alloc_pages dma-mapping: merge <linux/dma-noncoherent.h> into <linux/dma-map-ops.h> dma-mapping: move large parts of <linux/dma-direct.h> to kernel/dma dma-mapping: move dma-debug.h to kernel/dma/ dma-mapping: remove <asm/dma-contiguous.h> dma-mapping: merge <linux/dma-contiguous.h> into <linux/dma-map-ops.h> dma-contiguous: remove dma_contiguous_set_default dma-contiguous: remove dev_set_cma_area dma-contiguous: remove dma_declare_contiguous dma-mapping: split <linux/dma-mapping.h> cma: decrease CMA_ALIGNMENT lower limit to 2 firewire-ohci: use dma_alloc_pages dma-iommu: implement ->alloc_noncoherent dma-mapping: add new {alloc,free}_noncoherent dma_map_ops methods dma-mapping: add a new dma_alloc_pages API dma-mapping: remove dma_cache_sync 53c700: convert to dma_alloc_noncoherent ...
2020-10-15Merge tag 'sound-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "The amount of changes is smaller at this round (what a surprise), but lots of activity is seen. Most of changes are about ASoC driver development, especially Intel platforms. Here are some highlights: General: - Replace all tasklet usages with other alternatives - Cleanup of the ASoC error unwinding code - Fixes for trivial issues caught by static checker - Spell fixes allover the places ALSA Core: - Lockdep fix for control devices - Fix for potential OSS sequencer mutex stalls HD-audio and USB-audio: - SoundBlaster AE-7 support - Changes in quirk table for the rename handling - Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2. ASoC: - Lots of updates for Intel SOF and SoundWire enablement - Replacement of the DSP driver for some older x86 systems; the new code was written from scratch, better maintenance expected - Helpers for parsing auxiluary devices from the device tree - New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359 Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas Instruments J721E, TAS2110, TAS2564 and TAS2764" * tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits) ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close ALSA: hda: fix jack detection with Realtek codecs when in D3 ALSA: fireworks: use semicolons rather than commas to separate statements ALSA: hda: use semicolons rather than commas to separate statements ALSA: hda/i915 - fix list corruption with concurrent probes ASoC: dmaengine: Document support for TX only or RX only streams ASoC: mchp-spdiftx: remove 'TX' from playback stream name ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn ASoC: tas2764: Add the driver for the TAS2764 dt-bindings: tas2764: Add the TAS2764 binding doc ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled ASoC: stm32: dfsdm: add actual resolution trace ASoC: stm32: dfsdm: change rate limits ASoC: qcom: sc7180: Add support for audio over DP Asoc: qcom: lpass-platform : Increase buffer size ASoC: qcom: Add support for lpass hdmi driver Asoc: qcom: lpass:Update lpaif_dmactl members order Asoc:qcom:lpass-cpu:Update dts property read API ASoC: dt-bindings: Add dt binding for lpass hdmi ...
2020-10-15Merge tag 'usb-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ...
2020-10-14Merge tag 'iommu-updates-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ...
2020-10-14Merge tag 'pm-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These rework the collection of cpufreq statistics to allow it to take place if fast frequency switching is enabled in the governor, rework the frequency invariance handling in the cpufreq core and drivers, add new hardware support to a couple of cpufreq drivers, fix a number of assorted issues and clean up the code all over. Specifics: - Rework cpufreq statistics collection to allow it to take place when fast frequency switching is enabled in the governor (Viresh Kumar). - Make the cpufreq core set the frequency scale on behalf of the driver and update several cpufreq drivers accordingly (Ionela Voinescu, Valentin Schneider). - Add new hardware support to the STI and qcom cpufreq drivers and improve them (Alain Volmat, Manivannan Sadhasivam). - Fix multiple assorted issues in cpufreq drivers (Jon Hunter, Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan Gerhold, Viresh Kumar). - Fix several assorted issues in the operating performance points (OPP) framework (Stephan Gerhold, Viresh Kumar). - Allow devfreq drivers to fetch devfreq instances by DT enumeration instead of using explicit phandles and modify the devfreq core code to support driver-specific devfreq DT bindings (Leonard Crestez, Chanwoo Choi). - Improve initial hardware resetting in the tegra30 devfreq driver and clean up the tegra cpuidle driver (Dmitry Osipenko). - Update the cpuidle core to collect state entry rejection statistics and expose them via sysfs (Lina Iyer). - Improve the ACPI _CST code handling diagnostics (Chen Yu). - Update the PSCI cpuidle driver to allow the PM domain initialization to occur in the OSI mode as well as in the PC mode (Ulf Hansson). - Rework the generic power domains (genpd) core code to allow domain power off transition to be aborted in the absence of the "power off" domain callback (Ulf Hansson). - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael Wysocki). - Fix the handling of timer_expires in the PM-runtime framework on 32-bit systems and the handling of device links in it (Grygorii Strashko, Xiang Chen). - Add IO requests batching support to the hibernate image saving and reading code and drop a bogus get_gendisk() from there (Xiaoyi Chen, Christoph Hellwig). - Allow PCIe ports to be put into the D3cold power state if they are power-manageable via ACPI (Lukas Wunner). - Add missing header file include to a power capping driver (Pujin Shi). - Clean up the qcom-cpr AVS driver a bit (Liu Shixin). - Kevin Hilman steps down as designated reviwer of adaptive voltage scaling (AVS) drivers (Kevin Hilman)" * tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI PM: hibernate: remove the bogus call to get_gendisk() in software_resume() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd PM / devfreq: tegra30: Improve initial hardware resetting PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function PM / devfreq: Add devfreq_get_devfreq_by_node function ...
2020-10-14Merge tag 'for-linus-5.10b-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - two small cleanup patches - avoid error messages when initializing MCA banks in a Xen dom0 - a small series for converting the Xen gntdev driver to use pin_user_pages*() instead of get_user_pages*() - intermediate fix for running as a Xen guest on Arm with KPTI enabled (the final solution will need new Xen functionality) * tag 'for-linus-5.10b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: Fix typo in xen_pagetable_p2m_free() x86/xen: disable Firmware First mode for correctable memory errors xen/arm: do not setup the runstate info page if kpti is enabled xen: remove redundant initialization of variable ret xen/gntdev.c: Convert get_user_pages*() to pin_user_pages*() xen/gntdev.c: Mark pages as dirty
2020-10-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: "181 patches. Subsystems affected by this patch series: kbuild, scripts, ntfs, ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise, gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma, memory-failure, vmallo and migration)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits) mm/migrate: remove obsolete comment about device public mm/migrate: remove cpages-- in migrate_vma_finalize() mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary memblock: use separate iterators for memory and reserved regions memblock: implement for_each_reserved_mem_region() using __next_mem_region() memblock: remove unused memblock_mem_size() x86/setup: simplify reserve_crashkernel() x86/setup: simplify initrd relocation and reservation arch, drivers: replace for_each_membock() with for_each_mem_range() arch, mm: replace for_each_memblock() with for_each_mem_pfn_range() memblock: reduce number of parameters in for_each_mem_range() memblock: make memblock_debug and related functionality private memblock: make for_each_memblock_type() iterator private mircoblaze: drop unneeded NUMA and sparsemem initializations riscv: drop unneeded node initialization h8300, nds32, openrisc: simplify detection of memory extents arm64: numa: simplify dummy_numa_init() arm, xtensa: simplify initialization of high memory pages dma-contiguous: simplify cma_early_percent_memory() KVM: PPC: Book3S HV: simplify kvm_cma_reserve() ...
2020-10-13arch, drivers: replace for_each_membock() with for_each_mem_range()Mike Rapoport
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()Mike Rapoport
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); /* do something with start_pfn and end_pfn */ } Rather than iterate over all memblock.memory regions and each time query for their start and end PFNs, use for_each_mem_pfn_range() iterator to get simpler and clearer code. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Baoquan He <bhe@redhat.com> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format] Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13arm, xtensa: simplify initialization of high memory pagesMike Rapoport
free_highpages() in both arm and xtensa essentially open-code for_each_free_mem_range() loop to detect high memory pages that were not reserved and that should be initialized and passed to the buddy allocator. Replace open-coded implementation of for_each_free_mem_range() with usage of memblock API to simplify the code. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Axtens <dja@axtens.net> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Emil Renner Berthing <kernel@esmil.dk> Cc: Hari Bathini <hbathini@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: https://lkml.kernel.org/r/20200818151634.14343-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13mm: account PMD tables like PTE tablesMatthew Wilcox
We account the PTE level of the page tables to the process in order to make smarter OOM decisions and help diagnose why memory is fragmented. For these same reasons, we should account pages allocated for PMDs. With larger process address spaces and ASLR, the number of PMDs in use is higher than it used to be so the inaccuracy is starting to matter. [rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor] Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Joerg Roedel <joro@8bytes.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Cc: Stafford Horne <shorne@gmail.com> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Anders Roxell <anders.roxell@linaro.org> Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13Partially revert "ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 ↵Nick Desaulniers
or newer" This partially reverts commit b0fe66cf095016e0b238374c10ae366e1f087d11. The minimum supported version of clang is now clang 10.0.1. We still want to pass -meabi=gnu. Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Fangrui Song <maskray@google.com> Cc: Marco Elver <elver@google.com> Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lkml.kernel.org/r/20200902225911.209899-6-ndesaulniers@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-13Merge tag 'seccomp-v5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The bulk of the changes are with the seccomp selftests to accommodate some powerpc-specific behavioral characteristics. Additional cleanups, fixes, and improvements are also included: - heavily refactor seccomp selftests (and clone3 selftests dependency) to fix powerpc (Kees Cook, Thadeu Lima de Souza Cascardo) - fix style issue in selftests (Zou Wei) - upgrade "unknown action" from KILL_THREAD to KILL_PROCESS (Rich Felker) - replace task_pt_regs(current) with current_pt_regs() (Denis Efremov) - fix corner-case race in USER_NOTIF (Jann Horn) - make CONFIG_SECCOMP no longer per-arch (YiFei Zhu)" * tag 'seccomp-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits) seccomp: Make duplicate listener detection non-racy seccomp: Move config option SECCOMP to arch/Kconfig selftests/clone3: Avoid OS-defined clone_args selftests/seccomp: powerpc: Set syscall return during ptrace syscall exit selftests/seccomp: Allow syscall nr and ret value to be set separately selftests/seccomp: Record syscall during ptrace entry selftests/seccomp: powerpc: Fix seccomp return value testing selftests/seccomp: Remove SYSCALL_NUM_RET_SHARE_REG in favor of SYSCALL_RET_SET selftests/seccomp: Avoid redundant register flushes selftests/seccomp: Convert REGSET calls into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Convert HAVE_GETREG into ARCH_GETREG/ARCH_SETREG selftests/seccomp: Remove syscall setting #ifdefs selftests/seccomp: mips: Remove O32-specific macro selftests/seccomp: arm64: Define SYSCALL_NUM_SET macro selftests/seccomp: arm: Define SYSCALL_NUM_SET macro selftests/seccomp: mips: Define SYSCALL_NUM_SET macro selftests/seccomp: Provide generic syscall setting macro selftests/seccomp: Refactor arch register macros to avoid xtensa special case selftests/seccomp: Use __NR_mknodat instead of __NR_mknod selftests/seccomp: Use bitwise instead of arithmetic operator for flags ...
2020-10-13Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Allow DRBG testing through user-space af_alg - Add tcrypt speed testing support for keyed hashes - Add type-safe init/exit hooks for ahash Algorithms: - Mark arc4 as obsolete and pending for future removal - Mark anubis, khazad, sead and tea as obsolete - Improve boot-time xor benchmark - Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity Drivers: - Fixes and enhancement for XTS in caam - Add support for XIP8001B hwrng in xiphera-trng - Add RNG and hash support in sun8i-ce/sun8i-ss - Allow imx-rngc to be used by kernel entropy pool - Use crypto engine in omap-sham - Add support for Ingenic X1830 with ingenic" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits) X.509: Fix modular build of public_key_sm2 crypto: xor - Remove unused variable count in do_xor_speed X.509: fix error return value on the failed path crypto: bcm - Verify GCM/CCM key length in setkey crypto: qat - drop input parameter from adf_enable_aer() crypto: qat - fix function parameters descriptions crypto: atmel-tdes - use semicolons rather than commas to separate statements crypto: drivers - use semicolons rather than commas to separate statements hwrng: mxc-rnga - use semicolons rather than commas to separate statements hwrng: iproc-rng200 - use semicolons rather than commas to separate statements hwrng: stm32 - use semicolons rather than commas to separate statements crypto: xor - use ktime for template benchmarking crypto: xor - defer load time benchmark to a later time crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num' crypto: hisilicon/zip - fix the return value when device is busy crypto: hisilicon/zip - fix zero length input in GZIP decompress crypto: hisilicon/zip - fix the uncleared debug registers lib/mpi: Fix unused variable warnings crypto: x86/poly1305 - Remove assignments with no effect hwrng: npcm - modify readl to readb ...
2020-10-13Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: (30 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() arch_topology, arm, arm64: define arch_scale_freq_invariant() arch_topology, cpufreq: constify arch_* cpumasks cpufreq: report whether cpufreq supports Frequency Invariance (FI) cpufreq: move invariance setter calls in cpufreq core arch_topology: validate input frequencies to arch_set_freq_scale() cpufreq: qcom: Don't add frequencies without an OPP cpufreq: qcom-hw: Add cpufreq support for SM8250 SoC cpufreq: qcom-hw: Use of_device_get_match_data for offsets and row size cpufreq: qcom-hw: Use devm_platform_ioremap_resource() to simplify code dt-bindings: cpufreq: cpufreq-qcom-hw: Document Qcom EPSS compatible ...