summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2016-11-05ARM: dts: exynos: Add SCU device node to exynos4.dtsiPankaj Dubey
Exynos4 like other Cortex-A9 SoC's has a Snoop Control Unit(SCU) and its SFR are used during SMP boot and S2R. Add SCU node to the device tree. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2016-11-05ARM: dts: uniphier: make compatible of syscon nodes SoC-specificMasahiro Yamada
These hardware blocks are SoC-specific, so their compatible strings should be SoC-specific as well. This change has no impact on the actual behavior since it is controlled by the generic "simple-mfd", "syscon" compatible strings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-11-05ARM: dts: uniphier: add clocks/resets to EHCI nodes of sLD3 SoCMasahiro Yamada
Now, the clock/reset controller driver is available for this SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-11-05ARM: dts: uniphier: remove redundant serial fifo-size propertiesMasahiro Yamada
These are the default of the optional property. No need to describe them explicitly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-11-05ARM: dts: uniphier: make 32bit SoC DTSI linearMasahiro Yamada
I notice some mistakes in the SoC DTSI; wrong interrupts properties of timer nodes, mismatch between the node name and the compatible for sdctrl block. Given those problems fixed, the common parts among SoCs are less than I had first expected. The more and more property overrides are making the SoC DTSI unreadable. Stretch out the SoC DTSI files and fix the following: - Fix the 3rd cell of the interrupts property of the timer nodes for Pro4, Pro5, PXs2 - Fix the node name mioctrl to sdctrl for Pro5, PXs2 - Fix the second region of l2 node for PXs2 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-11-05ARM: dts: imx6: Add imx-weim parameters to dtsi'sJoshua Clayton
imx-weim should always set address-cells to 2, and size_cells to 1. On imx6, fsl,weim-cs-gpr will always be &gpr Set these common parameters in the dtsi file, rather than in a downstream dts. Signed-off-by: Joshua Clayton <stillcompiling@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-05ARM: dts: uniphier: add CPU clocks and OPP table for PXs2 SoCMasahiro Yamada
Add a CPU clock to every CPU node and a CPU OPP table to use the generic cpufreq driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-05ARM: dts: uniphier: add CPU clocks and OPP table for Pro5 SoCMasahiro Yamada
Add a CPU clock to every CPU node and a CPU OPP table to use the generic cpufreq driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2016-11-05ARM: dts: uniphier: increase register region size of sysctrl nodeMasahiro Yamada
The System Control node has 0x10000 byte of registers. The current reg size must be expanded to use the cpufreq driver because the registers controlling CPU frequency are located at offset 0x8000. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-11-04ARM: dts: stm32f429: add LSI and LSE clocksGabriel Fernandez
This patch adds lsi / lse oscillators. These clocks can be use by RTC clocks. The clock drivers needs to disable the power domain write protection using syscon / regmap to enable these clocks. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: stm32f429: remove Ethernet wake on Lan supportAlexandre TORGUE
This patch removes WoL (Wake on Lan) support as it is not yet fully supported and tested. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: stm32f429: Fix Ethernet node on Eval BoardAlexandre TORGUE
"phy-handle" entry is mandatory when mdio subnode is used in Ethernet node. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: stm32f429: Align Ethernet node with new bindings propertiesAlexandre TORGUE
This patch aligns clocks names and node reference according to new stm32-dwmac glue binding. It also renames Ethernet pinctrl phandle (indeed there is no need to add 0 as Ethernet instance as there is only one IP in SOC). Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: DT: stm32: move dma translation to board filesAlexandre TORGUE
stm32f469-disco and stm32f429-eval boards use SDRAM start address remapping (to @0) to boost performances. A DMA translation through "dma-ranges" property was needed for other masters than the M4 CPU. stm32f429-disco doesn't use remapping so doesn't need this DMA translation. This patches moves this DMA translation definition from stm32f429 soc file to board files. Tested-by: Bruno Herrera <bruherrera@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: DT: STM32: add dma for usart3 on F429Alexandre TORGUE
Add DMA support for USART3 on STM32F429 MCU. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: DT: STM32: add dma for usart1 on F429Gerald Baeza
Tested-by: Bruno Herrera <bruherrera@gmail.com> Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: Declare push button as GPIO key on stm32f429 boardsMaxime Coquelin
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: Add GPIO irq support to STM32F429Maxime Coquelin
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
2016-11-04ARM: dts: r8a7794: remove Z clockSergei Shtylyov
R8A7794 doesn't have Cortex-A15 CPUs, thus there's no Z clock... Fixes: 0dce5454d5c2 ("ARM: shmobile: Initial r8a7794 SoC device tree") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7779: marzen: Configure pinmuxing for the DU0 input clockLaurent Pinchart
DU0 uses an externally provided clock, but the corresponding pin isn't correctly muxed. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: sh73a0: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7740: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7779: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7778: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: emev2: Remove skeleton.dtsi inclusionGeert Uytterhoeven
As of commit 9c0da3cc61f1233c ("ARM: dts: explicitly mark skeleton.dtsi as deprecated"), including skeleton.dtsi is deprecated. This fixes the following warning with W=1: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7779: Fix DU reg propertyLaurent Pinchart
The system uses one address cell and one size cell, not two. Fix the DU DT node. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7793: Enable VIN0-VIN2Ulrich Hecht
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: koelsch: add HDMI inputHans Verkuil
Add support in the dts for the HDMI input. Based on the Lager dts patch from Ulrich Hecht. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [uli: removed "renesas," prefixes from pfc nodes] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: lager: Add entries for VIN HDMI input supportWilliam Towle
Add DT entries for vin0, vin0_pins, and adv7612. Sets the 'default-input' property for ADV7612, enabling image and video capture without the need to have userspace specifying routing. Signed-off-by: William Towle <william.towle@codethink.co.uk> Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk> [uli: added interrupt, renamed endpoint, merged default-input] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: rskrza1: add sdhi1 DT supportChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r7s72100: add sdhi to device treeChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7794: Fix W=1 dtc warningsGeert Uytterhoeven
Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,dvc/dvc@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,mix/mix@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ctu/ctu@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,src/src@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@0 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@1 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@2 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@3 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@4 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@5 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@6 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@7 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@8 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /sound@ec500000/rcar_sound,ssi/ssi@9 has a unit name, but no reg property Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: gose: use generic pinctrl properties in SDHI nodesSimon Horman
Since 16ccaf5bb5a5 ("pinctrl: sh-pfc: Accept standard function, pins and groups properties") renesas pfc drivers accept generic "function", "pins" and "groups" properties. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r7s72100: add sdhi clock to device treeChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r7s72100: add mmcif to device treeChris Brandt
Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7792: add MSIOF supportSergei Shtylyov
Define the generic R8A7792 parts of the MSIOF0/1 device nodes. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7792: add MSIOF clocksSergei Shtylyov
Describe the MSIOF0/1 clocks and their parent, MP clock in the R8A7792 device tree. Based on the original (and large) patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: wheat: add DU supportSergei Shtylyov
Define the Wheat board dependent part of the DU device node. Add the device nodes for the Analog Devices ADV7513 HDMI transmitters connected to DU0/1. Add the necessary subnodes to interconnect DU with HDMI transmitters/connectors. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7794: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7793: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7791: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: r8a7790: Correct SCIFB reg properties to cover all registersGeert Uytterhoeven
Several SCIFB registers reside outside the reported register ranges. Fortunately this works (on Linux), due to the PAGE_SIZE granularity of ioremap(). Extend the sizes from 64 to 0x100 bytes to fix this, like is done on SH/R-Mobile SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-11-04ARM: dts: alt: enable UHS for SDHI 0 & 1Simon Horman
Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1}. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-11-04ARM: dts: r8a7794: set maximum frequency for SDHI clocksSimon Horman
Define the upper limit otherwise the driver cannot utilize max speeds. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-11-04ARM: dts: koelsch: enable UHS for SDHI 0, 1 & 3Simon Horman
Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,1,2}. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2016-11-02ARM: dts: exynos: Remove exynos4415.dtsiKrzysztof Kozlowski
There are no boards in mainline using exynos4415.dtsi. These DTSIs were not tested for long. I am also not aware of any popular out-of-tree boards using this (except consumer devices released by Samsung but those cannot use mainline). Keeping Exynos4415 costs some useless effort so remove it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2016-11-02ARM: dts: imx: Fix "ERROR: code indent should use tabs where possible"Jagan Teki
Fixed code indent tabs in respetcive imx23, imx51, imx53, imx6dl, imx6q and imx6sx dtsi and dts files. Signed-off-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02ARM: dts: imx6qdl-nitrogen6_max: use hyphens for nodes nameGary Bisson
Therefore aligning the panel nodes name across all platforms. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02ARM: dts: imx6qdl-nit6xlite: use hyphens for nodes nameGary Bisson
Therefore aligning the panel nodes name across all platforms. Also removing the bt_rfkill node since the mainline rfkill-gpio driver doesn't support device trees. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-11-02ARM: dts: imx6qdl-nitrogen6x: use hyphens for nodes nameGary Bisson
Also aligning the panel nodes name across all platforms. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-11 10:20:27 +0000