summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-09-01[ARM] tegra: Add ZRELADDR default for ARCH_TEGRAErik Gilling
fixes the warning: .config:369:warning: symbol value '' invalid for ZRELADDR and the prompt for ZRELADDR on make Signed-off-by: Erik Gilling <konkers@android.com>
2010-08-28Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S5PV310: Fix on Secondary CPU startup ARM: S5PV310: Bug fix on uclk1 and sclk_pwm ARM: S5PV310: Fix missed uart clocks ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apll ARM: S5PV310: Fix on PLL setting for S5PV310 ARM: S5PV310: Add CMU block for S5PV310 Clock ARM: S5PV310: Fix on typo irqs.h of S5PV310 ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310 ARM: S5PV310: Fix on GPIO base addresses ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END type ARM: S5P: VMALLOC_END should be unsigned long
2010-08-28Merge branch 'for-linus' of git://android.git.kernel.org/kernel/tegraLinus Torvalds
* 'for-linus' of git://android.git.kernel.org/kernel/tegra: arm: tegra: VMALLOC_END should be unsigned long arm: tegra: fix compilation of board-harmony.c
2010-08-28Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP3: PM: ensure IO wakeups are properly disabled omap: Fix omap_4430sdp_defconfig for make oldconfig omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq omap: Fix sev instruction usage for multi-omap OMAP3: Fix a cpu type check problem omap3: id: fix 3630 rev detection
2010-08-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: pxa27x_keypad - remove input_free_device() in pxa27x_keypad_remove() Input: mousedev - fix regression of inverting axes Input: uinput - add devname alias to allow module on-demand load Input: hil_kbd - fix compile error USB: drop tty argument from usb_serial_handle_sysrq_char() Input: sysrq - drop tty argument form handle_sysrq() Input: sysrq - drop tty argument from sysrq ops handlers
2010-08-27ARM: S5PV310: Fix on Secondary CPU startupChanghwan Youn
Following occurs on boot message without this patch. CPU1: processor failed to boot Brought up 1 CPUs SMP: Total of 1 processors activated... This patch adds SYSRAM mapping for fixing Secondary CPU startup. CPU1: Booted secondary processor Brought up 2 CPUs SMP: Total of 2 processors activated... Signed-off-by: Changhwan Youn <chaos.youn@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Bug fix on uclk1 and sclk_pwmJongpill Lee
This patch fixes on enable and ctrlbit of uclk1 and sclk_pwm. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix missed uart clocksJongpill Lee
This patch adds missed uart clocks for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Should be clk_sclk_apll not clk_mout_apllJongpill Lee
This patch adds clk_sclk_apll so that fixes on clk_mout_apll. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on PLL setting for S5PV310Jongpill Lee
This patch fixes on PLL setting for S5PV310/S5PC210. Signed-off-by: Jongpill Lee <boyko.lee@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Add CMU block for S5PV310 ClockKukjin Kim
This patch adds CMU block for S5PV310/S5PC210 clock. (CMU: Clock Management Unit) Of course, changed current clock addresses for it together. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on typo irqs.h of S5PV310Kukjin Kim
This patch fixes typo 'IRQ_WTD' in the irqs.h of S5PV310. And minor update comments. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on default ZRELADDR of ARCH_S5PV310Kukjin Kim
This patch adds default zreladdr of ARCH_S5PV310. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: S5PV310: Fix on GPIO base addressesKyungmin Park
The S5PV310/S5PC210 has following three GPIO base addresses. Part1 Base Address=0x11400000 Part2 Base Address=0x11000000 Part3 Base Address=0x03860000 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor edit of title] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-27ARM: SAMSUNG: Fix on build warning regarding VMALLOC_END typeKukjin Kim
Fix this warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' And removes the useless parens and white space. Reported-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-08-23ARM: imx: fix build failure concerning otg/ulpiUwe Kleine-König
The build failure was introduced by 13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-23ARM: S5P: VMALLOC_END should be unsigned longKyungmin Park
Silences following build warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-08-22arm: tegra: VMALLOC_END should be unsigned longOlof Johansson
Silences following build warning: arch/arm/mm/init.c: In function 'mem_init': arch/arm/mm/init.c:644: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@google.com>
2010-08-22arm: tegra: fix compilation of board-harmony.cOlof Johansson
The patch "ARM: Remove DISCONTIGMEM support" removed the node id from the meminfo struct and the PHYS_TO_NID macro, causing compilation errors: arch/arm/mach-tegra/board-harmony.c: In function 'tegra_harmony_fixup': arch/arm/mach-tegra/board-harmony.c:94: error: 'struct membank' has no member named 'node' arch/arm/mach-tegra/board-harmony.c:94: error: implicit declaration of function 'PHYS_TO_NID' arch/arm/mach-tegra/board-harmony.c:97: error: 'struct membank' has no member named 'node' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Colin Cross <ccross@google.com>
2010-08-20s5pc110: SDHCI-s3c can override host capabilitiesKyungmin Park
Each board can override the default sdhci host capabilities. Some board has broken features by hardwares and support 8-bit bandwidth. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-19Input: sysrq - drop tty argument from sysrq ops handlersDmitry Torokhov
Noone is using tty argument so let's get rid of it. Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: amba clcd: don't disable an already disabled clock ARM: Tighten check for allowable CPSR values ARM: 6329/1: wire up sys_accept4() on ARM ARM: 6328/1: Build with -fno-dwarf2-cfi-asm ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used
2010-08-17Make do_execve() take a const filename pointerDavid Howells
Make do_execve() take a const filename pointer so that kernel_execve() compiles correctly on ARM: arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type This also requires the argv and envp arguments to be consted twice, once for the pointer array and once for the strings the array points to. This is because do_execve() passes a pointer to the filename (now const) to copy_strings_kernel(). A simpler alternative would be to cast the filename pointer in do_execve() when it's passed to copy_strings_kernel(). do_execve() may not change any of the strings it is passed as part of the argv or envp lists as they are some of them in .rodata, so marking these strings as const should be fine. Further kernel_execve() and sys_execve() need to be changed to match. This has been test built on x86_64, frv, arm and mips. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-16OMAP3: PM: ensure IO wakeups are properly disabledKevin Hilman
Commit 5a5f561 (convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes) mistakenly removed the check for PER when disabling the IO chain. During idle, if the PER powerdomain transitions into a lower state and CORE does not, the IO pad wakeups are not being disabled in the idle path after they are enabled. This can happen with the lower C-states when using CPUidle for example. This patch ensures that the check for disabling IO wakeups also checks for PER transitions, matching the check done to enable IO wakeups. Found when debugging PM/CPUidle related problems reported by Ameya Palande <ameya.palande@nokia.com>. Problems were triggered particularily on boards with UART2 consoles (n900, Overo) since UART2 is in the PER powerdomain. Tested on l-o master (omap3_defonfig + CONFIG_CPU_IDLE=y) as well as with current PM branch. Boards tested: n900, Overo, omap3evm. Cc: Paul Walmsley <paul@pwsan.com> Cc: Ameya Palande <ameya.palande@nokia.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: updated description to clarify the transistion] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-16omap: Fix omap_4430sdp_defconfig for make oldconfigTony Lindgren
Commit ffb63e3402849e1b70119ee0c9a81dc9da4dfa97 changed Kconfig to select support for omap2, 3 and 4 by default. However, CONFIG_SMP won't currently work properly on uniprocessor ARMs, or if support for earlier ARM cores is selected in. Fix this by updating omap_4430sdp_defconfig to not select omap2 or 3 at this point. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-08-16omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirqTony Lindgren
Otherwise we get the following error when enabling CONFIG_SMP for omap3_defconfig: arch/arm/kernel/entry-armv.S: Assembler messages: arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ipi r0,r6,r5,lr' arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ltirq r0,r6,r5,lr' arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ipi r0,r6,r5,lr' arch/arm/kernel/entry-armv.S:48: Error: bad instruction `test_for_ltirq r0,r6,r5,lr' Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-08-16omap: Fix sev instruction usage for multi-omapTony Lindgren
Otherwise we get the following error with omap3_defconfig and CONFIG_SMP: Error: selected processor does not support `sev' Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2010-08-16OMAP3: Fix a cpu type check problemstanley.miao
cpu_is_omap3517() and cpu_is_omap3505() are the subgroups of cpu_is_omap34xx(), so we should check cpu_is_omap3517() and cpu_is_omap3505() first, then check cpu_is_omap34xx(). Otherwise, All AM35XX (Sitara) clocks do not get registered and device drivers (ti_hecc, etc...) that depend on those clocks are failing to get the clock and end up with non working device. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Tested-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-16omap3: id: fix 3630 rev detectionNishanth Menon
Wrong placement of break causes all revisions of 3630 to be detected as 3630 es1.2, we need to break main loop if we have an identified chip, default falls through as in the rest of the switches in this function. Cc: Paul Walmsley <paul@pwsan.com> Cc: Sanjeev Premi <premi@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Manjunath K <manjugk@ti.com> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-15Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: mtd/nand_ids: Fix buswidth mtd/m25p80: fix test for end of loop mtd/m25p80: retlen is never NULL MIPS: Fix gen_nand probe structures contents gen_nand: Test if nr_chips field is valid BFIN: Fix gen_nand probe structures contents nand/denali: move all hardware initialization work to denali_hw_init nand/denali: Add a page check in denali_read_page & denali_read_page_raw nand/denali: use cpu_relax() while waiting for hardware interrupt nand/denali: change read_status function method nand/denali: Fixed check patch warnings ARM: Fix gen_nand probe structures contents mtd/nand_base: fix kernel-doc warnings & typos nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk nand/denali: Fixed handle ECC error bugs nand/denali: use iowrite32() to replace denali_write32() nand/denali: Fixed probe function bugs
2010-08-15ARM: Tighten check for allowable CPSR valuesRussell King
Reviewed-by: Arve Hjønnevåg <arve@android.com> Acked-by: Dima Zavin <dima@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-15ARM: 6329/1: wire up sys_accept4() on ARMMikael Pettersson
sys_accept4() was added in kernel 2.6.28, but ARM was not updated to include it. The number and types of parameters is such that no ARM-specific processing is needed, so wiring up sys_accept4() just requires defining __NR_accept4 and adding a direct call in the syscall entry table. Tested with an EABI 2.6.35 kernel and Ulrich Drepper's original accept4() test program, modified to define __NR_accept4 for ARM. Using the updated unistd.h also eliminates a warning then building glibc (2.10.2 and newer) about accept4() being unimplemented. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-14ARM: 6328/1: Build with -fno-dwarf2-cfi-asmMichal Marek
Commit d0679c7 restricted this workaround to powerpc only, but it turns out that ARM needs it as well. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16310 . Reported-and-Tested-by: Robert Nelson <robertcnelson@gmail.com> Acked-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-14archs: replace unifdef-y with header-ySam Ravnborg
unifdef-y and header-y have same semantic, so drop unifdef-y Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2010-08-14Merge branch 'for-linus/samsung-2635' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung-2635' of git://git.fluff.org/bjdooks/linux: DMAENGINE: correct PL080 register header file ARM: SAMSUNG: Fix on build warning about dependency in Kconfig ARM: SMDK6410: Make virtual screen twice depth of real ARM: S3C64XX: Update consistent DMA size to 8MiB ARM: S3C64XX: Add audio support to SmartQ ARM: S3C64XX: Framebuffer fix for SmartQ5 ARM: S3C64XX: Set wifi and iNAND as permanently connected SD devices on SmartQ boards ARM: S3C64XX: Move SmartQ LCD control platform definition to shared file ARM: mach-real6410: add sdhc device support ARM: mach-real6410: add dm9000 ethernet support for mach-real6410 ARM: S3C64XX: Support for Real6410 Fix up trivial conflicts in arch/arm/mach-s3c64xx/mach-smartq5.c ("remove pixclock" vs "Framebuffer fix for SmartQ5")
2010-08-14Merge branch 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/i2c-2636' of git://git.fluff.org/bjdooks/linux: i2c/nuc900: add i2c driver support for nuc900 i2c: Enable NXP LPC support in Kconfig i2c-pxa: fix compiler warning, due to missing const i2c: davinci: bus recovery procedure to clear the bus i2c: davinci: Add cpufreq support i2c: davinci: Add suspend/resume support i2c: davinci: Add helper functions for power management i2c: davinci: misc. cleanups: remove MOD_REG_BIT and IO_ADDRESS usage i2c: davinci: Fix smbus Oops with AIC33 usage
2010-08-14Merge branch 'for-2636/s3c64xx' into for-linus/samsung-2635Ben Dooks
2010-08-14DMAENGINE: correct PL080 register header fileLinus Walleij
This PL008 among all other variables named PL080 doesn't seem right. Fix it. Also add some missing defined that I use in the new PL08x driver. Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: SAMSUNG: Fix on build warning about dependency in KconfigKukjin Kim
This patch fixes on following build warning. warning: (PLAT_S5P && (ARCH_S5P6440 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5PV310) || ARCH_S3C64XX && <choice>) selects PLAT_SAMSUNG which has unmet direct dependencies (ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX) Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: SMDK6410: Make virtual screen twice depth of realBen Dooks
For situations where double buffering is needed (such as the current Android) make the screen virtual y size twice the LCD size so that there is space for a second screen that can be switched to. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: S3C64XX: Update consistent DMA size to 8MiBBen Dooks
Change the area available for consitent DMA allocations from the default to 8MiB to allow drivers such as the framebuffer to get more memory (for situations where larger virtual screen resolutions are needed). Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: S3C64XX: Add audio support to SmartQMaurus Cuelenaere
This adds the I²C board information for the WM8987 used in the SmartQ as audio codec and adds the I²C/I²S platform drivers. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: S3C64XX: Framebuffer fix for SmartQ5Patrick Georgi
The following change makes the framebuffer work on SmartQ5. There are still some problems with ADC, so this patch alone won't make the device run (or even give a working fb), but it's one issue less to think about. Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: S3C64XX: Set wifi and iNAND as permanently connected SD devices on ↵Maurus Cuelenaere
SmartQ boards This patch changes the platform data definitions of the wifi and iNAND chip on the SmartQ 5 and 7 to indicate that they don't have a CD line available and are thus hard-wired to the SDHCI data lines. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: S3C64XX: Move SmartQ LCD control platform definition to shared fileMaurus Cuelenaere
This shares the common LCD control platform definition used in the SmartQ 5 and 7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one, which was wrong. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: mach-real6410: add sdhc device supportDarius Augulis
Register SHDCI devices Signed-off-by: Darius Augulis <augulis.darius@gmail.com> [ben-linux@fluff.org: rewrite header[ Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: mach-real6410: add dm9000 ethernet support for mach-real6410Darius Augulis
This patch is based on "[PATCH v2] Support for Real6410" Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: S3C64XX: Support for Real6410Darius Augulis
Add support for CoreWind Real6410 board, based on Samsung s3c6410 processor. Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-08-14ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer usederic miao
According to commit 22eeef4bb2a7fd225089c0044060ed1fbf091958 kgdb,arm: Individual register get/set for arm It's now replaced by DBG_MAX_REG_NUM. Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-13Mark arguments to certain syscalls as being constDavid Howells
Mark arguments to certain system calls as being const where they should be but aren't. The list includes: (*) The filename arguments of various stat syscalls, execve(), various utimes syscalls and some mount syscalls. (*) The filename arguments of some syscall helpers relating to the above. (*) The buffer argument of various write syscalls. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 17:22:38 +0000