summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-12-22OMAP3: fix typo in OMAP3_IVA_MASKArno Steffen
OMAP3_IVA_MASK should use OMAP3_IVA_SHIFT instead of OMAP3_SGX_SHIFT Signed-off-by: Arno Steffen <arno.steffen@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap: rx51: Remove tvout code that plays with gpio 40Jarkko Nikula
Commit 60d24ee "Added video data to support tvout on rx51" added code that tries to assign gpio 40 as OMAP DSS reset_gpio for tvout. This is wrong since this gpio has nothing to do with OMAP DSS but it is used to control one switch that selects is the audio jack connected to tvout or audio circuitry. This switch is already supported by the RX51 ASoC driver so there is no need to control it elsewhere. Switch is contolled with ALSA control 'Jack Function' and tvout can be selected with following example: amixer -D hw:0 set 'Jack Function' 'TV-OUT' Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap: rx51: Add vdda_dac supply for tvoutJarkko Nikula
Commmit 60d24ee "Added video data to support tvout on rx51" broke the DSS on RX51/N900 since it added DSS VENC support but a patch adding needed supply is missing from tree and no framebuffers are initialized. This patch is basically cleaned up version of original one: http://marc.info/?l=linux-omap&m=129070041402418&w=2 Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-22omap: rx51: Cleanup vdds_sdi supply constructionJarkko Nikula
It is much more cleaner to use REGULATOR_SUPPLY macro and a device name instead of having a reference to rx51_display_device.dev with #if defined() guards. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP4: Pandaboard: Fix MMC card detect gpio lineRaghuveer Murthy
commit bf56f0a6668cd (2.6.37-rc1), from Nishanth Menon attempted to fix card detection for PandaBoard, unfortunately, the fix missed to initialize .gpio_cd member of omap2_hsmmc_info. This results in a default value of '0', which is a valid GPIO line. On PandaBoard, the side effect of this is that GPIO line 0 controls the powering TFP410 DVI chip, and without the fix DVI chip is inadvertently powered. Tested-by: David Anders <x0132446@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Raghuveer Murthy <raghuveer.murthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP3: Devkit8000: Add DEBUG_LL supportThomas Weber
Add support for DEBUG_LL for Devkit8000. Devkit8000 uses uart 3 for debug output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21OMAP2: Devkit8000: Use _cansleep GPIO functions for displayreset linesDaniel Morsing
The display reset lines are connected to a TPS65930 which may sleep when changing GPIO values. Use the appropriate function to silence a nasty warning from gpiolib. Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Acked-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-21Merge branch 'pm-opp' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-21Merge branch 'pm-next' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-12-21Merge branch 'devel-dma' into omap-for-linusTony Lindgren
2010-12-21OMAP3: ASM sleep code format reworkJean Pihet
Cosmetic fixes to the code: - white spaces and tabs, - alignement, - comments rephrase and typos, - multi-line comments Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: add comments for low power code errataJean Pihet
Errata covered: - 1.157 & 1.185 - i443 - i581 Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: rework of the ASM sleep code execution pathsJean Pihet
- Reworked and simplified the execution paths for better readability and to avoid duplication of code, - Added comments on the entry and exit points and the interaction with the ROM code for OFF mode restore, - Reworked the existing comments for better readability. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: re-organize the ASM sleep codeJean Pihet
Organize the code in the following sections: - register access macros, - API functions, - internal functions. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: remove hardcoded values from the ASM sleep codeJean Pihet
Using macros from existing include files for registers addresses. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Based on original patch from Vishwa. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Vishwanath BS <vishwanath.bs@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP2+: use global values for the SRAM PA addressesJean Pihet
The SRAM PA addresses are locally defined and used at different places, i.e. SRAM management code and idle sleep code. The macros are now defined at a centralized place, for easier maintenance. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: remove unused code from the ASM sleep codeJean Pihet
Remove unused code: - macros, - variables, - unused semaphore locking API. This API shall be added back when needed, - infinite loops for debug. Tested on N900 and Beagleboard with full RET and OFF modes, using cpuidle and suspend. Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Tested-by: Nishanth Menon<nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3630: PM: Erratum i583: disable coreoff if < ES1.2Eduardo Valentin
Limitation i583: Self_Refresh Exit issue after OFF mode Issue: When device is waking up from OFF mode, then SDRC state machine sends inappropriate sequence violating JEDEC standards. Impact: OMAP3630 < ES1.2 is impacted as follows depending on the platform: CS0: for 38.4MHz as internal sysclk, DDR content seen to be stable, while for all other sysclk frequencies, varied levels of instability seen based on varied parameters. CS1: impacted This patch takes option #3 as recommended by the Silicon erratum: Avoid core power domain transitioning to OFF mode. Power consumption impact is expected in this case. To do this, we route core OFF requests to RET request on the impacted revisions of silicon. Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: rebased the code to 2.6.37-rc2- short circuit code changed a bit] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: PM: make omap3_cpuidle_update_states independent of enable_off_modeNishanth Menon
Currently omap3_cpuidle_update_states makes whole sale decision on which C states to update based on enable_off_mode variable Instead, achieve the same functionality by independently providing mpu and core deepest states the system is allowed to achieve and update the idle states accordingly. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> [khilman: fixed additional user of this API in OMAP CPUidle driver] Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3630: PM: Disable L2 cache while invalidating L2 cachePeter 'p2' De Schrijver
While coming out of MPU OSWR/OFF states, L2 controller is reseted. The reset behavior is implementation specific as per ARMv7 TRM and hence $L2 needs to be invalidated before it's use. Since the AUXCTRL register is also reconfigured, disable L2 cache before invalidating it and re-enables it afterwards. This is as per Cortex-A8 ARM documentation. Currently this is identified as being needed on OMAP3630 as the disable/enable is done from "public side" while, on OMAP3430, this is done in the "secure side". Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [nm@ti.com: ported to 2.6.37-rc2, added hooks to enable the logic only on 3630] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3630: PM: Erratum i608: disable RTANishanth Menon
Erratum id: i608 RTA (Retention Till Access) feature is not supported and leads to device stability issues when enabled. This impacts modules with embedded memories on OMAP3630 Workaround is to disable RTA on boot and coming out of core off. For disabling RTA coming out of off mode, we do this by overriding the restore pointer for 3630 as the first point of entry before caches are touched and is common for GP and HS devices. To disable earlier than this could be possible by modifying the PPA for HS devices, but not for GP devices. Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Jean Pihet <j-pihet@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [ambresh@ti.com: co-developer] Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: pm: introduce errata handlingNishanth Menon
Introduce errata handling for OMAP3. This patch introduces errata variable and stub for initialization which will be filled up by follow-on patches. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: PM: Erratum i581 support: dll kick strategyPeter 'p2' De Schrijver
Erratum i581 impacts OMAP3 platforms. PRCM DPLL control FSM removes SDRC_IDLEREQ before DPLL3 locks causing the DPLL not to be locked at times. IMPORTANT: *) This is not a complete workaround implementation as recommended by the silicon erratum. This is a support logic for detecting lockups and attempting to recover where possible and is known to provide stability in multiple platforms. *) This code is mostly important for inactive and retention. The ROM code waits for the maximum DLL lock time when resuming from off mode. So for off mode this code isn't really needed. *) counters are introduced here for eventual export to userspace once the cleanups are completed. This should eventually get refactored as part of cleanups to sleep34xx.S Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: PM: Update clean_l2 to use v7_flush_dcache_allRichard Woodruff
Analysis in TI kernel with ETM showed that using cache mapped flush in kernel instead of SO mapped flush cost drops by 65% (3.39mS down to 1.17mS) for clean_l2 which is used during sleep sequences. Overall: - speed up - unfortunately there isn't a good alternative flush method today - code reduction and less maintenance and potential bug in unmaintained code This also fixes the bug with the clean_l2 function usage. Reported-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Jean Pihet <j-pihet@ti.com> [nm@ti.com: ported rkw's proposal to 2.6.37-rc2] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP3: remove OPP interfaces from OMAP PM layerKevin Hilman
With new OPP layer, OPP users will access OPP API directly instead of using OMAP PM layer, so remove all notions of OPPs from the OMAP PM layer. Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21omap4: opp: add OPP table dataNishanth Menon
This patch adds OPP tables for OMAP4. New file has been added to keep the OMAP4 opp tables and the registration of these tables with the generic opp framework by OMAP SoC OPP interface. Based on: http://dev.omapzoom.org/?p=santosh/kernel-omap4-base.git;a=blob;f=arch/arm/mach-omap2/opp44xx_data.c;h=252e3d0cb6050a64f390b9311c1c4977d74f762a;hb=refs/heads/omap4_next Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21omap: opp: add OMAP3 OPP table data and common initNishanth Menon
Add OPP data for OMAP34xx and OMAP36xx and initialization functions to populate OPP tables based on current SoC. introduce an OMAP generic opp initialization routine which OMAP3 and OMAP4+ SoCs can use to register their OPP definitions. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP: pm.c correct the initcall for an early init.Thara Gopinath
omap2_common_pm_init is the API where generic system devices like mpu, l3 etc get initialized. This has to happen really early on during the boot and not at a later time. This is especially important with the new opp changes as these devices need to be built before the opp tables init happen. Today both are device initcalls and it works just because of the order of compilation. Making this postcore_initcall is ideal because the omap device layer init happens as a core_initcall and typically rest of the driver/device inits are arch_initcall or something lower. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-21OMAP2+: disable idle early in the suspend sequenceJean Pihet
Some bad interaction between the idle and the suspend paths has been identified: the idle code is called during the suspend enter and exit sequences. This could cause corruption or lock-up of resources. The solution is to move the calls to disable_hlt at the very beginning of the suspend sequence (ex. in omap3_pm_begin instead of omap3_pm_prepare), and the call to enable_hlt at the very end of the suspend sequence (ex. in omap3_pm_end instead of omap3_pm_finish). Tested with RET and OFF on Beagle and OMAP3EVM. Signed-off-by: Jean Pihet <j-pihet@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-12-20Merge branches 'devel-iommu-mailbox' and 'devel-l2x0' into omap-for-linusTony Lindgren
2010-12-20omap: rx51: Switch rx51_tpa6130a2_data __initdata to__initdata_or_moduleJarkko Nikula
If the TPA6130 is compiled as module the id and power_gpio values are arbitrary at module probing time since the rx51_tpa6130a2_data was marked as __initdata. Fix this by using __initdata_or_module. Then __initdata is defined only if the kernel is built without CONFIG_MODULES and omitted otherwise. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap: pandora: fix wifi supportGrazvydas Ignotas
After commit ed919b0 "mmc: sdio: fix runtime PM anomalies by introducing MMC_CAP_POWER_OFF_CARD" it is required to specify MMC_CAP_POWER_OFF_CARD to have runtime PM support. As the wl1251 driver expects card to be powered down when it's not used, wifi will no longer work after interface is brought down at least once without functioning runtime PM. Fix this by declaring MMC_CAP_POWER_OFF_CARD for MMC3. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP4: Pandaboard: Add omap_reserve functionalityRaghuveer Murthy
This patch adds omap_reserve functionality to board-omap4panda.c. Helps in the reserving boot time memory in SDRAM, used here for framebuffer allocation. This patch is in similar lines to commit id 71ee7dad9b6991, from Russell king Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Raghuveer Murthy <raghuveer.murthy@ti.com> [tony@atomide.com: fixed to be before .map_io as pointed out by Russell King] Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap4: Add platform changes for PWM LEDHemanth V
Register TWL6030 PWM, which is used as charging LED Signed-off-by: Hemanth V <hemanthv@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap4: Add platform changes for Ambient Light sensorHemanth V
Register BH1780GLI Ambient light sensor, which is an I2C device for 4430SDP board. Signed-off-by: Hemanth V <hemanthv@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap3: igepv2: LED gpio-led:green:d1 is active lowLaurent Pinchart
Make sure the LED is turned off at boot time, and configure the GPIO LED device as active low. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap3: igepv2: Don't call gpio_set_value right aftergpio_direction_outputLaurent Pinchart
gpio_direction_output() has a value argument, there's no need to call gpio_set_value() explicitly right after. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap1: Fix innovator FPGA init for multi-omapTony Lindgren
No need to call this early from init_irq. Also recent changes initialize GPIO now later, so calling gpio_request from init_irq will make it fail. While at it, also remove the unnecessary EXPORT_SYMBOL. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20Fix IGEPv2 second MMC channel power supplyMarc Zyngier
Commit 72f381ba056 (omap3: Remove VMMC2 regulator on IGEP v2) removed an unused regulator entry, but left the second MMC channel (used by the Libertas WLAN module) without link to power regulator. This causes the SDIO module to fail being detected. This patch adds the two regulators that actually feed the WLAN module (1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the second channel is properly detected. Details of the power supply implementation were kindly provided by Enric Balletbo i Serra. Also change vmmc1 to use symbolic names instead of direct device reference. Tested on an IGEPv2 Rev-B. Signed-off-by: Marc Zyngier <maz@misterjones.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap2430: hwmod: remove stray declarationAnand Gadiyar
Patch "OMAP2xxx: hwmod: add I2C hwmods for OMAP2420, 2430" in linux-next as of 20101203 introduced the following build warning - fix this by removing the stray i2c_dev_attr. arch/arm/mach-omap2/omap_hwmod_2430_data.c:483: warning: 'i2c_dev_attr' defined but not used Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20Added video data to support tvout on rx51Srikar
To support tvout on rx51,added Intilization data, tvout as display device and enabled venc through gpio on rx51 Signed-off-by: Srikar <ext-srikar.1.bhavanarayana@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap: rx51: Add supplies and data for codec b part ofTLV320AIC34Jarkko Nikula
Upcoming ASoC core and tlv320aic3x changes makes possible to take b part of TLV320AIC34 into use on RX51/N900. Prepare to this by adding virtual supplies and platform data for b part of the codec. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20omap: rx51: Remove extra tlv320aic3x.h inclusionJarkko Nikula
Remove second tlv320aic3x.h inclusion that came along the commit f0fba2a "ASoC: multi-component - ASoC Multi-Component Support". Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20arm: mach-omap2: Kconfig: fix incorrect optionAaro Koskinen
There is no MFD config option, MFD_SUPPORT should be selected instead. This will prevent build errors when trying out different configurations. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20arm: mach-omap2: hsmmc_reset: fix clk_get() error handlingAaro Koskinen
clk_get() return value should be checked with IS_ERR(). Furthermore, clocks should be put and disabled properly. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP: DMA: Convert DMA library into platform driverG, Manjunath Kondaiah
Convert DMA library into DMA platform driver and make use of platform data provided by hwmod data base for OMAP2+ onwards. For OMAP1 processors, the DMA driver in mach-omap uses resource structures for getting platform data. Thanks to Tony Lindgren <tony@atomide.com> for fixing various omap1 issues and testing the same on OSK5912 board. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP2+: DMA: hwmod: Device registrationG, Manjunath Kondaiah
Prepare OMAP2+ DMA to use hwmod infrastructure so that DMA can register as platform device. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP1: DMA: Implement in platform device modelG, Manjunath Kondaiah
Implement OMAP1 DMA as platform device and add support for registering through platform device layer using resource structures. Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP4: hwmod data: add system DMABenoit Cousson
Add OMAP4 DMA hwmod data. In addition to original dma hwmod data, the following changes are added. 1. DMA device attributes structure is introduced for diffenrenciating OMAP cpu's based on DMA features. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-12-20OMAP3: hwmod data: add system DMAG, Manjunath Kondaiah
Add OMAP3 DMA hwmod data Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 15:51:40 +0000