summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2011-07-20switch assorted clock drivers to debugfs_remove_recursive()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: davinci: DM365 EVM: fix video input mux bits ARM: davinci: Check for NULL return from irq_alloc_generic_chip arm: davinci: Fix low level gpio irq handlers' argument
2011-07-19davinci: DM365 EVM: fix video input mux bitsJon Povey
Video input mux settings for tvp7002 and imager inputs were swapped. Comment was correct. Tested on EVM with tvp7002 input. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Acked-by: Manjunath Hadli <manjunath.hadli@ti.com> Cc: stable@kernel.org Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-19ARM: davinci: Check for NULL return from irq_alloc_generic_chipTodd Poynor
Avoid NULL dereference of irq_alloc_generic_chip return in low memory conditions. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-17Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: SAMSUNG: DMA Cleanup as per sparse ARM: SAMSUNG: Check NULL return from irq_alloc_generic_chip
2011-07-16ARM: SAMSUNG: DMA Cleanup as per sparseSangwook Lee
Function declaration differs between file: dma.c and file:dma.h and SPARSE (Documentation/sparse.txt) gives error messages All dma channels are members of 'enum dma_ch' and not 'unsigned int' Please have a look at channel definitions in: arch/arm/mach-s3c64xx/include/mach/dma.h arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h arch/arm/mach-s3c2410/include/mach/dma.h So all arguments should be of type 'enum dma_ch' Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-16ARM: SAMSUNG: Check NULL return from irq_alloc_generic_chipTodd Poynor
Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-15ARM: fix regression in IXP4xx clocksourceRichard Cochran
Commit 234b6ceddb4fc2a4bc5b9a7670f070f6e69e0868 clocksource: convert ARM 32-bit up counting clocksources broke the build for ixp4xx and made big endian operation impossible. This commit restores the original behaviour. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> [ Thomas says that we might want to have generic BE accessor functions to the MMIO clock source, but that hasn't happened yet, so in the meantime this seems to be the short-term fix for the particular problem - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-12Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: pcmcia: pxa2xx/vpac270: free gpios on exist rather than requesting ARM: pxa/raumfeld: fix device name for codec ak4104 ARM: pxa/raumfeld: display initialisation fixes ARM: pxa/raumfeld: adapt to upcoming hardware change ARM: pxa: fix gpio_to_chip() clash with gpiolib namespace genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd) arm: mach-vt8500: add forgotten irq_data conversion ARM: pxa168: correct nand pmu setting ARM: pxa910: correct nand pmu setting ARM: pxa: fix PGSR register address calculation
2011-07-12arm: davinci: Fix low level gpio irq handlers' argumentIdo Yariv
Commit 7416401 ("arm: davinci: Fix fallout from generic irq chip conversion") introduced a bug, causing low level interrupt handlers to get a bogus irq number as an argument. The gpio irq handler falsely assumes that the handler data is the irq base number and that is no longer true. Set the irq handler data to be a pointer to the corresponding gpio controller. The chained irq handler can then use it to extract both the irq base number and the gpio registers structure. Signed-off-by: Ido Yariv <ido@wizery.com> CC: Thomas Gleixner <tglx@linutronix.de> [nsekhar@ti.com: renamed "ctl" to "d", simplified indexing logic for chips and took care of odd bank handling in irq handler] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-07-11Merge branch 'fix' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes
2011-07-11ARM: pxa/raumfeld: fix device name for codec ak4104Daniel Mack
In commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support), the name of the ak4104 codec driver was changed without amending the platform code which uses it as well. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/raumfeld: display initialisation fixesSven Neumann
The display requires some milliseconds between GPIO_TFT_VA_EN and GPIO_DISPLAY_ENABLE. Reorder initialisation to comply with the display spec. Also tune timings for better compliance with the spec. Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa/raumfeld: adapt to upcoming hardware changeSven Neumann
The backlight control is going to change back to PWM in the upcoming Raumfeld Controller hardware revision. Signed-off-by: Sven Neumann <s.neumann@raumfeld.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-11ARM: pxa: fix gpio_to_chip() clash with gpiolib namespaceLinus Walleij
The PXA platform code has a static inline helper called gpio_to_chip which clashes with the gpiolib namespace if we try to expose the function with the same name from gpiolib, and it's still confusing even if we don't do that. So rename it to gpio_to_pxachip(). Reported-by: H Hartley Sweeten <hartleys@visionengravers.com> Cc: Eric Miao <eric.miao@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-10Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printing ARM: 6987/1: l2x0: fix disabling function to avoid deadlock ARM: 6966/1: ep93xx: fix inverted RTS/DTR signals on uart1 ARM: 6980/1: mmci: use StartBitErr to detect bad connections ARM: 6979/1: mach-vt8500: add forgotten irq_data conversion ARM: move memory layout sanity checking before meminfo initialization ARM: 6990/1: MAINTAINERS: add entry for ARM PMU profiling and debugging ARM: 6989/1: perf: do not start the PMU when no events are present ARM: dmabounce: fix map_single() error return value
2011-07-08Merge branch 's5p-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung * 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C2440: fix section mismatch on mini2440 ARM: S3C24XX: drop return codes in void function of dma.c ARM: S3C24XX: don't use uninitialized variable in dma.c ARM: EXYNOS4: Set appropriate I2C device variant ARM: S5PC100: Fix for compilation error spi/s3c64xx: Bug fix for SPI with different FIFO level ARM: SAMSUNG: Add tx_st_done variable ARM: EXYNOS4: Address a section mismatch w/ suspend issue. ARM: S5P: Fix bug on init of PWMTimers for HRTimer ARM: SAMSUNG: header file revised to prevent declaring duplicated ARM: EXYNOS4: fix improper gpio configuration ARM: EXYNOS4: Fix card detection for sdhci 0 and 2
2011-07-08Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: drop __initdata tags from static struct platform_device declarations
2011-07-08ARM: S3C2440: fix section mismatch on mini2440Wolfram Sang
If mini2440_init() is in __init, mini2440_parse_features() should also be in __init. Fixes: (.text+0x9adc): Section mismatch in reference from the function mini2440_parse_features.clone.0() to the (unknown reference) .init.data:(unknown) The function mini2440_parse_features.clone.0() references the (unknown reference) __initdata (unknown). Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Michel Pollet <buserror@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-08ARM: S3C24XX: drop return codes in void function of dma.cWolfram Sang
Commit bb072c3c (ARM / Samsung: Use struct syscore_ops for "core" power management) turned s3c2410_dma_resume_chan() from int to void. So, drop the actual return values, too. Fixes: arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_resume_chan': arch/arm/plat-s3c24xx/dma.c:1238:3: warning: 'return' with a value, in function returning void arch/arm/plat-s3c24xx/dma.c:1250:2: warning: 'return' with a value, in function returning void Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-08ARM: S3C24XX: don't use uninitialized variable in dma.cWolfram Sang
Commit 8970ef47 (S3C24XX: Remove hardware specific registers from DMA calls) removed the parameter dcon in s3c2410_dma_config() and calculates it on its own. So the debug-output for the old parameter can go, too. Fixes: arch/arm/plat-s3c24xx/dma.c: In function 's3c2410_dma_config': arch/arm/plat-s3c24xx/dma.c:1030:2: warning: 'dcon' is used uninitialized in this function Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-07genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)Simon Guinot
This fixes a regression introduced by e59347a "arm: orion: Use generic irq chip". Depending on the device, interrupts acknowledgement is done by setting or by clearing a dedicated register. Replace irq_gc_ack() with some {set,clr}_bit variants allows to handle both cases. Note that this patch affects the following SoCs: Davinci, Samsung and Orion. Except for this last, the change is minor: irq_gc_ack() is just renamed into irq_gc_ack_set_bit(). For the Orion SoCs, the edge GPIO interrupts support is currently broken. irq_gc_ack() try to acknowledge a such interrupt by setting the corresponding cause register bit. The Orion GPIO device expect the opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used. Tested on Network Space v2. Reported-by: Joey Oravec <joravec@drewtech.com> Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07arm: mach-vt8500: add forgotten irq_data conversionWolfram Sang
This platform has not been converted to 'struct irq_data' when the big pile was done. It fails to compile nowadays, because the compatibility code has gone. CC arch/arm/mach-vt8500/irq.o arch/arm/mach-vt8500/irq.c:118:2: error: unknown field 'ack' specified in initializer arch/arm/mach-vt8500/irq.c:118:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:119:2: error: unknown field 'mask' specified in initializer arch/arm/mach-vt8500/irq.c:119:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:120:2: error: unknown field 'unmask' specified in initializer arch/arm/mach-vt8500/irq.c:120:2: warning: initialization from incompatible pointer type arch/arm/mach-vt8500/irq.c:121:2: error: unknown field 'set_type' specified in initializer arch/arm/mach-vt8500/irq.c:121:2: warning: initialization from incompatible pointer type make[1]: *** [arch/arm/mach-vt8500/irq.o] Error 1 Add the missing conversion. Tested on a JayPC-Tablet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alexey Charkov <alchark@gmail.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-07ARM: 6994/1: smp_twd: Fix typo in 'twd_timer_rate' printingVitaly Kuzmichev
To get hundredths of MHz the rate needs to be divided by 10'000. Here is an example: twd_timer_rate = 123456789 Before the patch: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 1000000) % 100 = 23 Result: 123.23MHz. After being fixed: twd_timer_rate / 1000000 = 123 (twd_timer_rate / 10000) % 100 = 45 Result: 123.45MHz. Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: 6987/1: l2x0: fix disabling function to avoid deadlockWill Deacon
The l2x0_disable function attempts to writel with the l2x0_lock held. This results in deadlock when the writel contains an outer_sync call for the platform since the l2x0_lock is already held by the disable function. A further problem is that disabling the L2 without flushing it first can lead to the spin_lock operation becoming visible after the spin_unlock, causing any subsequent L2 maintenance to deadlock. This patch replaces the writel with a call to writel_relaxed in the disabling code and adds a flush before disabling in the control register, preventing livelock from occurring. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: 6966/1: ep93xx: fix inverted RTS/DTR signals on uart1Petr Štetiar
It was discovered by Roberto Bergo, that RTS/DTR signals are inverted after the boot, because it was causing him problems with hardware controlled modem connected on ttyAM0. Todd Valentic came with this patch for the issue. Discussion: http://tech.groups.yahoo.com/group/ts-7000/message/20259 Comments from Petr Štetiar: Sorry, but forget to add Acked-by[1]: 1. https://patchwork.kernel.org/patch/873052/ Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Todd Valentic <todd.valentic@sri.com> Tested-by: Roberto Bergo <roberto.bergo@robson.it> Signed-off-by: Petr Štetiar <ynezz@true.cz> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: 6979/1: mach-vt8500: add forgotten irq_data conversionWolfram Sang
This platform has not been converted to 'struct irq_data' when the big pile was done and fails to compile nowadays. Tested on a JayPC-Tablet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-06ARM: pxa168: correct nand pmu settingLei Wen
The original pair of <0x01db, 208000000> is invalid. Correct it to the valid value. The 6th bit of the NFC APMU register indicates NFC works whether at 156Mhz or 78Mhz. So 0x19b indicates NFC works at 156Mhz, and 0x1db indicates it works at 78Mhz. Signed-off-by: Lei Wen <leiwen@marvell.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: pxa910: correct nand pmu settingLei Wen
The original pair of <0x01db, 208000000> is invalid. Correct to the valid value. Signed-off-by: Lei Wen <leiwen@marvell.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: pxa: fix PGSR register address calculationPaul Parsons
The file mfp-pxa2xx.c defines a macro, PGSR(), which translates a gpio bank number to a PGSR register address. The function pxa2xx_mfp_suspend() erroneously passed in a gpio number instead of a gpio bank number. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-07-06ARM: EXYNOS4: Set appropriate I2C device variantSylwester Nawrocki
Set up a correct I2C bus controller variant name for Exynos4. Without this change the I2C bus driver fails to acquire its clocks. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06Merge branch 'for-spi' into s5p-fixes-for-linusKukjin Kim
2011-07-06ARM: S5PC100: Fix for compilation errorPadmavathi Venna
S5PC100 Compilation fails without this patch Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: SAMSUNG: Add tx_st_done variablePadmavathi Venna
tx_st_done is required for checking the transmission status of SPI channels with different fifo levels Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: EXYNOS4: Address a section mismatch w/ suspend issue.MyungJoo Ham
The section mismatch in headsmp.S made hotplug stop working after the first instance of suspend-to-RAM and its wakeup. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: S5P: Fix bug on init of PWMTimers for HRTimerSangbeom Kim
This patch fixes following. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 128.651309] Calibrating delay loop... There is a big jump. The reason is that PWM Timer which is for HRTimer was used before its initialization. So this patch changes its order and following is kernel boot log message after this. <6>[ 0.000000] sched_clock: 32 bits at 33MHz, ... <6>[ 0.000088] Calibrating delay loop... Signed-off-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: SAMSUNG: header file revised to prevent declaring duplicatedMyungJoo Ham
There has been no #ifndef - #define - #endif protection for this header file. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: EXYNOS4: fix improper gpio configurationNaveen Krishna Chatradhi
These pins are incorrectly configured for PCM2 configure them to SPDIF(_OUT & _EXT_CLK) Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-06ARM: EXYNOS4: Fix card detection for sdhci 0 and 2Thomas Abraham
On SMDKV310 board, a card detect gpio pin is available that is directly connected to the io pad of the sdhci controller. Fix incorrect value of cd_type field in platform data for sdhci instance 0 and 2. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-07-05ARM: move memory layout sanity checking before meminfo initializationRussell King
Ensure that the meminfo array is sanity checked before we pass the memory to memblock. This helps to ensure that memblock and meminfo agree on the dimensions of memory, especially when more memory is passed than the kernel can deal with. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-05ARM: 6989/1: perf: do not start the PMU when no events are presentWill Deacon
armpmu_enable can be called in situations where no events are present (for example, from the event rotation tick after a profiled task has exited). In this case, we currently start the PMU anyway which may leave it active inevitably without any events being monitored. This patch adds a simple check to the enabling code so that we avoid starting the PMU when no events are present. Cc: <stable@kernel.org> Reported-by: Ashwin Chaugle <ashwinc@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-07-04Merge branch 'at91/fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc * 'at91/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-2.6-arm-soc: AT91: Change nand buswidth logic to match hardware default configuration at91: Use "pclk" as con_id on at91cap9 and at91rm9200 at91: fix udc, ehci and mmc clock device name for cap9/9g45/9rl atmel_serial: fix internal port num at91: fix at91_set_serial_console: use platform device id
2011-07-04AT91: Change nand buswidth logic to match hardware default configurationNicolas Ferre
The recently modified nand buswitth configuration is not aligned with board reality: the double footprint on boards is always populated with 8bits buswidth nand flashes. So we have to consider that without particular configuration the 8bits buswidth is selected by default. Moreover, the previous logic was always using !board_have_nand_8bit(), we change it to a simpler: board_have_nand_16bit(). Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-07-04omap: drop __initdata tags from static struct platform_device declarationsJanusz Krzysztofik
Pointers to statically declared platform device structures which are registered with platform_device_register() are then used during run time to access these structure members, for example from platform_uevent() and much more. Therefore, these structures should never be placed inside sections which are dropped after boot. Fix platform devices incorrectly tagged with __initdata which happen to exist inside OMAP sub-trees. This bug has exhibited itself on my ARM/OMAP1 based Amstrad Delta videophone after commit 6d3163ce86dd386b4f7bda80241d7fea2bc0bb1d, "mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE", resulting in reading from several /sys/device/platform/*/uevent files always ending up with segmentation faults. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Varadarajan, Charulatha <charu@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-03ARM: dmabounce: fix map_single() error return valueRussell King
When map_single() is unable to obtain a safe buffer, we must return the dma_addr_t error value, which is ~0 rather than 0. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-30Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: ARM: mach-shmobile: make a struct in board-ap4evb.c static ARM: mach-shmobile: ag5evm: consistently name sdhi info structures ARM: mach-shmobile: mackerel: change usbhs devices order
2011-06-30ARM: mach-shmobile: make a struct in board-ap4evb.c staticGuennadi Liakhovetski
struct soc_camera_link imx074_link in board-ap4evb.c doesn't have to be global. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-28Merge branch 'tty-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: serial: bcm63xx_uart: fix irq storm after rx fifo overrun. amba pl011: platform data for reg lockup and glitch v2 amba pl011: workaround for uart registers lockup tty: n_gsm: improper skb_pull() use was leaking framed data tty: n_gsm: Fixed logic to decode break signal from modem status TTY: ntty, add one more sanity check TTY: ldisc, do not close until there are readers 8250: Fix capabilities when changing the port type 8250_pci: Fix missing const from merges ARM: SAMSUNG: serial: Fix on handling of one clock source for UART serial: ioremap warning fix for jsm driver. 8250_pci: add -ENODEV code for Intel EG20T PCH
2011-06-27Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: pm: ensure ARMv7 CPUs save and restore the TLS register ARM: pm: proc-v7: fix missing struct processor pointers for suspend code ARM: 6969/1: plat-iop: fix build error ARM: 6961/1: zImage: Add build-time check for correctly-sized proc_type entries ARM: SMP: wait for CPU to be marked active ARM: 6963/1: Thumb-2: Relax relocation requirements for non-function symbols ARM: 6962/1: mach-h720x: fix build error ARM: 6959/1: SMP build fix for entry-macro-multi.S
2011-06-25at91: Use "pclk" as con_id on at91cap9 and at91rm9200Joachim Eastwood
Hello, I am not 100% sure this is the right thing to do, but it makes the atmel-ssc driver happy on my at91rm9200 board. This unifies the con_id across all at91 machines. The atmel-ssc driver expects the con_id to be "pclk" or it will fail probing. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 21:27:53 +0000