summaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)Author
2019-02-08Merge tag 'armsoc-fixes-5.0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "This is a bit larger than normal, as we had not managed to send out a pull request before traveling for a week without my signing key. There are multiple code fixes for older bugs, all of which should get backported into stable kernels: - tango: one fix for multiplatform configurations broken on other platforms when tango is enabled - arm_scmi: device unregistration fix - iop32x: fix kernel oops from extraneous __init annotation - pxa: remove a double kfree - fsl qbman: close an interrupt clearing race The rest is the usual collection of smaller fixes for device tree files, on the renesas, allwinner, meson, omap, davinci, qualcomm and imx platforms. Some of these are for compile-time warnings, most are for board specific functionality that fails to work because of incorrect settings" * tag 'armsoc-fixes-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits) ARM: tango: Improve ARCH_MULTIPLATFORM compatibility firmware: arm_scmi: provide the mandatory device release callback ARM: iop32x/n2100: fix PCI IRQ mapping arm64: dts: add msm8996 compatible to gicv3 ARM: dts: am335x-shc.dts: fix wrong cd pin level ARM: dts: n900: fix mmc1 card detect gpio polarity ARM: dts: omap3-gta04: Fix graph_port warning ARM: pxa: ssp: unneeded to free devm_ allocated data ARM: dts: r8a7743: Convert to new LVDS DT bindings soc: fsl: qbman: avoid race in clearing QMan interrupt arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 ARM: dts: da850: fix interrupt numbers for clocksource dt-bindings: imx8mq: Number clocks consecutively arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: imx6sx: correct backward compatible of gpt ARM: dts: imx: replace gpio-key,wakeup with wakeup-source property ARM: dts: vf610-bk4: fix incorrect #address-cells for dspi3 ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ...
2019-02-05arm64: kexec_file: handle empty command-lineJean-Philippe Brucker
Calling strlen() on cmdline == NULL produces a kernel oops. Since having a NULL cmdline is valid, handle this case explicitly. Fixes: 52b2a8af7436 ("arm64: kexec_file: load initrd and device-tree") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-04arm64: ptdump: Don't iterate kernel page tables using PTRS_PER_PXXWill Deacon
When 52-bit virtual addressing is enabled for userspace (CONFIG_ARM64_USER_VA_BITS_52=y), the kernel continues to utilise 48-bit virtual addressing in TTBR1. Consequently, PTRS_PER_PGD reflects the larger page table size for userspace and the pgd pointer for kernel page tables is offset before being written to TTBR1. This means that we can't use PTRS_PER_PGD to iterate over kernel page tables unless we apply the same offset, which is fiddly to get right and leads to some non-idiomatic walking code. Instead, just follow the usual pattern when walking page tables by using a while loop driven by pXd_offset() and pXd_addr_end(). Reported-by: Qian Cai <cai@lca.pw> Tested-by: Qian Cai <cai@lca.pw> Acked-by: Steve Capper <steve.capper@arm.com> Tested-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: hibernate: Clean the __hyp_text to PoC after resumeJames Morse
During resume hibernate restores all physical memory. Any memory that is accessed with the MMU disabled needs to be cleaned to the PoC. KVMs __hyp_text was previously ommitted as it runs with the MMU enabled, but now that the hyp-stub is located in this section, we must clean __hyp_text too. This ensures secondary CPUs that come online after hibernate has finished resuming, and load KVM via the freshly written hyp-stub see the correct instructions. Signed-off-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: hyp-stub: Forbid kprobing of the hyp-stubJames Morse
The hyp-stub is loaded by the kernel's early startup code at EL2 during boot, before KVM takes ownership later. The hyp-stub's text is part of the regular kernel text, meaning it can be kprobed. A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid. Add it to the __hyp_text. Signed-off-by: James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: kprobe: Always blacklist the KVM world-switch codeJames Morse
On systems with VHE the kernel and KVM's world-switch code run at the same exception level. Code that is only used on a VHE system does not need to be annotated as __hyp_text as it can reside anywhere in the kernel text. __hyp_text was also used to prevent kprobes from patching breakpoint instructions into this region, as this code runs at a different exception level. While this is no longer true with VHE, KVM still switches VBAR_EL1, meaning a kprobe's breakpoint executed in the world-switch code will cause a hyp-panic. Move the __hyp_text check in the kprobes blacklist so it applies on VHE systems too, to cover the common code and guest enter/exit assembly. Fixes: 888b3c8720e0 ("arm64: Treat all entry code as non-kprobe-able") Reviewed-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: kaslr: ensure randomized quantities are clean also when kaslr is offArd Biesheuvel
Commit 1598ecda7b23 ("arm64: kaslr: ensure randomized quantities are clean to the PoC") added cache maintenance to ensure that global variables set by the kaslr init routine are not wiped clean due to cache invalidation occurring during the second round of page table creation. However, if kaslr_early_init() exits early with no randomization being applied (either due to the lack of a seed, or because the user has disabled kaslr explicitly), no cache maintenance is performed, leading to the same issue we attempted to fix earlier, as far as the module_alloc_base variable is concerned. Note that module_alloc_base cannot be initialized statically, because that would cause it to be subject to a R_AARCH64_RELATIVE relocation, causing it to be overwritten by the second round of KASLR relocation processing. Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-02-01arm64: Do not issue IPIs for user executable ptesCatalin Marinas
Commit 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") was aimed at fixing the I-cache invalidation for kernel mappings. However, it inadvertently caused all cache maintenance for user mappings via set_pte_at() -> __sync_icache_dcache() -> sync_icache_aliases() to call kick_all_cpus_sync(). Reported-by: Shijith Thotton <sthotton@marvell.com> Tested-by: Shijith Thotton <sthotton@marvell.com> Reported-by: Wandun Chen <chenwandun@huawei.com> Fixes: 3b8c9f1cdfc5 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Cc: <stable@vger.kernel.org> # 4.19.x- Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-30Merge tag 'sunxi-fixes-for-5.0' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.0 A couple of device tree fixes for the 5.0 cycle: - Add missing clock-output-names for the osc24M clock on sun6i/A31 The Linux clock driver uses the device node as the clock name if the property is missing. The node name was changed in 5.0-rc1, breaking a subtle dependency in the sunxi-ng clock driver, and renders Linux unable to completely boot up. - Add alias for Ethernet controller on Beelink X2 This allows the bootloader to assign a deterministically generated MAC address to it. - Add property to enable USB VBUS regulator on OrangePi Win The board had defined the constraints for the regulator, but was missing the property to actually enable it. * tag 'sunxi-fixes-for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Fix USB OTG regulator ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2 ARM: dts: sun6i: Add clock-output-names to osc24M clock arm64: dts: allwinner: a64: Fix the video engine compatible Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30Merge tag 'amlogic-fixes-2.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.0-rc, round 2 - several fixups for the GPIO cd-inverted change - IRQ trigger fixes for MAC IRQ * tag 'amlogic-fixes-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low arm: dts: meson: Fix IRQ trigger type for macirq Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30Merge tag 'qcom-fixes-for-5.0-rc3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/fixes Qualcomm ARM64 Fixes for 5.0-rc3 * Fix irq controller compatible for the MSM8996 platforms * tag 'qcom-fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: add msm8996 compatible to gicv3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30Merge tag 'renesas-fixes2-for-v5.0' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Second Round of Renesas ARM Based SoC Fixes for v5.0 Enable DMA for SCIF2 on R-Car M3-W (r8a7796) and M3-n (r8a77965), and (RZ/G2M) r8a774a1 SoCs. This is was omitted from patches enabling DMA for other SCIF devices on the same SoCs due to missing documentation. However, it is regarded as a fix as arguably those patches claim to add this feature. Per-SoC patches are provided to ease backporting of this fix as the kernel version to be fixed is different for each SoC. * tag 'renesas-fixes2-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-24arm64: dts: add msm8996 compatible to gicv3Srinivas Kandagatla
Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor. With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996. Without this patch Qualcomm DB820c board reboots on mainline. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-23arm64/xen: fix xen-swiotlb cache flushingChristoph Hellwig
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA DMA mapping operations stored in the struct device arch data. Switching arm64 to use the direct calls for the merged DMA direct / swiotlb code broke this scheme. Replace the indirect calls with direct-calls in xen-swiotlb as well to fix this problem. Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct") Reported-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2019-01-17arm64: dts: renesas: r8a77965: Enable DMA for SCIF2Geert Uytterhoeven
SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2. Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-17arm64: dts: renesas: r8a7796: Enable DMA for SCIF2Geert Uytterhoeven
SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2. Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-17arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2Geert Uytterhoeven
SCIF2 on RZ/G2M can be used with both DMAC1 and DMAC2. Fixes: 3a3933a4fa36430a ("arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-16kasan, arm64: remove redundant ARCH_SLAB_MINALIGN defineAndrey Konovalov
Defining ARCH_SLAB_MINALIGN in arch/arm64/include/asm/cache.h when KASAN is off is not needed, as it is defined in defined in include/linux/slab.h as ifndef. Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-16arm64: kaslr: ensure randomized quantities are clean to the PoCArd Biesheuvel
kaslr_early_init() is called with the kernel mapped at its link time offset, and if it returns with a non-zero offset, the kernel is unmapped and remapped again at the randomized offset. During its execution, kaslr_early_init() also randomizes the base of the module region and of the linear mapping of DRAM, and sets two variables accordingly. However, since these variables are assigned with the caches on, they may get lost during the cache maintenance that occurs when unmapping and remapping the kernel, so ensure that these values are cleaned to the PoC. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: f80fb3a3d508 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-16arm64: kpti: Update arm64_kernel_use_ng_mappings() when forced onJames Morse
Since commit b89d82ef01b3 ("arm64: kpti: Avoid rewriting early page tables when KASLR is enabled"), a kernel built with CONFIG_RANDOMIZE_BASE can decide early whether to use non-global mappings by checking the kaslr_offset(). A kernel built without CONFIG_RANDOMIZE_BASE, instead checks the cpufeature static-key. This leaves a gap where CONFIG_RANDOMIZE_BASE was enabled, no kaslr seed was provided, but kpti was forced on using the cmdline option. When the decision is made late, kpti_install_ng_mappings() will re-write the page tables, but arm64_kernel_use_ng_mappings()'s value does not change as it only tests the cpufeature static-key if CONFIG_RANDOMIZE_BASE is disabled. This function influences PROT_DEFAULT via PTE_MAYBE_NG, and causes pgattr_change_is_safe() to catch nG->G transitions when the unchanged PROT_DEFAULT is used as part of PAGE_KERNEL_RO: [ 1.942255] alternatives: patching kernel code [ 1.998288] ------------[ cut here ]------------ [ 2.000693] kernel BUG at arch/arm64/mm/mmu.c:165! [ 2.019215] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 2.020257] Modules linked in: [ 2.020807] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2 #51 [ 2.021917] Hardware name: linux,dummy-virt (DT) [ 2.022790] pstate: 40000005 (nZcv daif -PAN -UAO) [ 2.023742] pc : __create_pgd_mapping+0x508/0x6d0 [ 2.024671] lr : __create_pgd_mapping+0x500/0x6d0 [ 2.058059] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 2.059369] Call trace: [ 2.059845] __create_pgd_mapping+0x508/0x6d0 [ 2.060684] update_mapping_prot+0x48/0xd0 [ 2.061477] mark_linear_text_alias_ro+0xdc/0xe4 [ 2.070502] smp_cpus_done+0x90/0x98 [ 2.071216] smp_init+0x100/0x114 [ 2.071878] kernel_init_freeable+0xd4/0x220 [ 2.072750] kernel_init+0x10/0x100 [ 2.073455] ret_from_fork+0x10/0x18 [ 2.075414] ---[ end trace 3572f3a7782292de ]--- [ 2.076389] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b If arm64_kernel_unmapped_at_el0() is true, arm64_kernel_use_ng_mappings() should also be true. Signed-off-by: James Morse <james.morse@arm.com> CC: Ard Biesheuvel <ard.biesheuvel@linaro.org> CC: John Garry <john.garry@huawei.com> CC: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-14arm64: dts: meson: Fix mmc cd-gpios polarityLoys Ollivier
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high". Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-14Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A bigger batch than I anticipated this week, for two reasons: - Some fallout on Davinci from board file -> DTB conversion, that also includes a few longer-standing fixes (i.e. not recent regressions). - drivers/reset material that has been in linux-next for a while, but didn't get sent to us until now for a variety of reasons (maintainer out sick, holidays, etc). There's a functional dependency in there such that one platform (Altera's SoCFPGA) won't boot without one of the patches; instead of reverting the patch that got merged, I looked at this set and decided it was small enough that I'll pick it up anyway. If you disagree I can revisit with a smaller set. That being said, there's also a handful of the usual stuff: - Fix for a crash on Armada 7K/8K when the kernel touches PSCI-reserved memory - Fix for PCIe reset on Macchiatobin (Armada 8K development board, what this email is sent from in fact :) - Enable a few new-merged modules for Amlogic in arm64 defconfig - Error path fixes on Integrator - Build fix for Renesas and Qualcomm - Initialization fix for Renesas RZ/G2E .. plus a few more fixlets" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: integrator: impd1: use struct_size() in devm_kzalloc() qcom-scm: Include <linux/err.h> header gpio: pl061: handle failed allocations ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area ARM: dts: da850-lcdk: Correct the sound card name ARM: dts: da850-lcdk: Correct the audio codec regulators ARM: dts: da850-evm: Correct the sound card name ARM: dts: da850-evm: Correct the audio codec regulators ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries ARM: davinci: dm355-evm: fix label names in GPIO lookup entries ARM: davinci: da850-evm: fix label names in GPIO lookup entries ARM: davinci: da830-evm: fix label names in GPIO lookup entries arm64: defconfig: enable modules for amlogic s400 sound card reset: uniphier-glue: Add AHCI reset control support in glue layer dt-bindings: reset: uniphier: Add AHCI core reset description reset: uniphier-usb3: Rename to reset-uniphier-glue dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals ...
2019-01-12Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson
mvebu fixes for 5.0 They are all device tree fixes which also worth being in stable: - Reserve PSCI area on Armada 7K/8K preventing the kernel accessing this area and crashing while doing it. - Use correct PCIe reset signal on MACCHIATOBin (Armada 8040 based) - Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based) * tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: Fix polarity of GPIO fan lines arm64: dts: marvell: mcbin: fix PCIe reset signal arm64: dts: marvell: armada-ap806: reserve PSCI area Signed-off-by: Olof Johansson <olof@lixom.net>
2019-01-11Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Another handful of arm64 fixes here. Most of the complication comes from improving our kpti code to avoid lengthy pauses (30+ seconds) during boot when we rewrite the page tables. There are also a couple of IORT fixes that came in via Lorenzo. Summary: - Don't error in kexec_file_load if kaslr-seed is missing in device-tree - Fix incorrect argument type passed to iort_match_node_callback() - Fix IORT build failure when CONFIG_IOMMU_API=n - Fix kpti performance regression with new rodata default option - Typo fix" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kexec_file: return successfully even if kaslr-seed doesn't exist ACPI/IORT: Fix rc_dma_get_range() arm64: kpti: Avoid rewriting early page tables when KASLR is enabled arm64: asm-prototypes: Fix fat-fingered typo in comment ACPI/IORT: Fix build when CONFIG_IOMMU_API=n
2019-01-11arm64: kexec_file: return successfully even if kaslr-seed doesn't existAKASHI Takahiro
In kexec_file_load, kaslr-seed property of the current dtb will be deleted any way before setting a new value if possible. It doesn't matter whether it exists in the current dtb. So "ret" should be reset to 0 here. Fixes: commit 884143f60c89 ("arm64: kexec_file: add kaslr support") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10arm64: kpti: Avoid rewriting early page tables when KASLR is enabledWill Deacon
A side effect of commit c55191e96caa ("arm64: mm: apply r/o permissions of VM areas to its linear alias as well") is that the linear map is created with page granularity, which means that transitioning the early page table from global to non-global mappings when enabling kpti can take a significant amount of time during boot. Given that most CPU implementations do not require kpti, this mainly impacts KASLR builds where kpti is forcefully enabled. However, in these situations we know early on that non-global mappings are required and can avoid the use of global mappings from the beginning. The only gotcha is Cavium erratum #27456, which we must detect based on the MIDR value of the boot CPU. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10arm64: dts: marvell: mcbin: fix PCIe reset signalBaruch Siach
The MPP52 signal is on the seconds GPIO instance of CP0, which corresponds to the &cp0_gpio2 handle. Rename the property name to the standard '-gpios' suffix while at it. Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from Linux leads to an immediate crash. So let's make the same memory reservation as the vendor kernel. [gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: asm-prototypes: Fix fat-fingered typo in commentWill Deacon
Some of the right letters, not necessarily in the right order: CONFIG_MODEVERIONS -> CONFIG_MODVERSIONS Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-10arm64: dts: allwinner: a64: Fix USB OTG regulatorJernej Skrabec
Currently, AXP803 driver assumes that reg_drivevbus is input which is wrong. Unfortunate consequence of that is that none of the USB ports work on the board, even USB HOST port, because USB PHY driver probing fails due to missing regulator. Fix that by adding "x-powers,drive-vbus-en" property to AXP803 node. Fixes: 14ff5d8f9151 ("arm64: dts: allwinner: a64: Orange Pi Win: Enable USB OTG socket") Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-08kasan, arm64: use ARCH_SLAB_MINALIGN instead of manual aligningAndrey Konovalov
Instead of changing cache->align to be aligned to KASAN_SHADOW_SCALE_SIZE in kasan_cache_create() we can reuse the ARCH_SLAB_MINALIGN macro. Link: http://lkml.kernel.org/r/52ddd881916bcc153a9924c154daacde78522227.1546540962.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Suggested-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-08arm64: defconfig: enable modules for amlogic s400 sound cardJerome Brunet
Compile the necessary drivers as modules, including codecs, for the s400 sound card. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-07arm64: dts: allwinner: a64: Fix the video engine compatiblePaul Kocialkowski
When introducing the video-codec node for the video engine, the compatible for the H5 was used instead of the compatible for the A64. Use the right compatible instead. Fixes: d60ce24740d2 ("arm64: dts: allwinner: a64: Add Video Engine node") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-06Merge tag 'kbuild-v4.21-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-06arch: remove redundant UAPI generic-y definesMasahiro Yamada
Now that Kbuild automatically creates asm-generic wrappers for missing mandatory headers, it is redundant to list the same headers in generic-y and mandatory-y. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2019-01-06arch: remove stale comments "UAPI Header export list"Masahiro Yamada
These comments are leftovers of commit fcc8487d477a ("uapi: export all headers under uapi directories"). Prior to that commit, exported headers must be explicitly added to header-y. Now, all headers under the uapi/ directories are exported. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06jump_label: move 'asm goto' support test to KconfigMasahiro Yamada
Currently, CONFIG_JUMP_LABEL just means "I _want_ to use jump label". The jump label is controlled by HAVE_JUMP_LABEL, which is defined like this: #if defined(CC_HAVE_ASM_GOTO) && defined(CONFIG_JUMP_LABEL) # define HAVE_JUMP_LABEL #endif We can improve this by testing 'asm goto' support in Kconfig, then make JUMP_LABEL depend on CC_HAS_ASM_GOTO. Ugly #ifdef HAVE_JUMP_LABEL will go away, and CONFIG_JUMP_LABEL will match to the real kernel capability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
2019-01-05Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull more ARM SoC updates from Olof Johansson: "A few updates that we merged late but are low risk for regressions for other platforms (and a few other straggling patches): - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in here. They're for a driver for the PL353 SRAM controller and a build fix for the qualcomm scm driver. - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante GPU, 256MB RAM, Wifi). This includes some acked platform-specific drivers (serial, etc). This also include DTs for two boards with this SoC, OrangePi 2G and OrangePi i86. - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K video playback offload). This is the first i.MX 64-bit SoC. - Some minor updates to Samsung boards (adding a few peripherals in DTs). - Small rework for SMP bootup on STi platforms. - A couple of TEE driver fixes. - A couple of new config options (bcm2835 thermal, Uniphier MDMAC) enabled in defconfigs" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC arm64: defconfig: Re-enable bcm2835-thermal driver MAINTAINERS: Add entry for RDA Micro SoC architecture tty: serial: Add RDA8810PL UART driver ARM: dts: rda8810pl: Add interrupt support for UART dt-bindings: serial: Document RDA Micro UART ARM: dts: rda8810pl: Add timer support ARM: dts: Add devicetree for OrangePi i96 board ARM: dts: Add devicetree for OrangePi 2G IoT board ARM: dts: Add devicetree for RDA8810PL SoC ARM: Prepare RDA8810PL SoC dt-bindings: arm: Document RDA8810PL and reference boards dt-bindings: Add RDA Micro vendor prefix ARM: sti: remove pen_release and boot_lock arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards arm64: dts: imx8mq-evk: enable watchdog arm64: dts: imx8mq: add watchdog devices MAINTAINERS: add i.MX8 DT path to i.MX architecture arm64: add support for i.MX8M EVK board arm64: add basic DTS for i.MX8MQ ...
2019-01-05Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "I'm safely chained back up to my desk, so please pull these arm64 fixes for -rc1 that address some issues that cropped up during the merge window: - Prevent KASLR from mapping the top page of the virtual address space - Fix device-tree probing of SDEI driver - Fix incorrect register offset definition in Hisilicon DDRC PMU driver - Fix compilation issue with older binutils not liking unsigned immediates - Fix uapi headers so that libc can provide its own sigcontext definition - Fix handling of private compat syscalls - Hook up compat io_pgetevents() syscall for 32-bit tasks - Cleanup to arm64 Makefile (including now to avoid silly conflicts)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: compat: Hook up io_pgetevents() for 32-bit tasks arm64: compat: Don't pull syscall number from regs in arm_compat_syscall arm64: compat: Avoid sending SIGILL for unallocated syscall numbers arm64/sve: Disentangle <uapi/asm/ptrace.h> from <uapi/asm/sigcontext.h> arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definition drivers/perf: hisi: Fixup one DDRC PMU register offset arm64: replace arm64-obj-* in Makefile with obj-* arm64: kaslr: Reserve size of ARM64_MEMSTART_ALIGN in linear region firmware: arm_sdei: Fix DT platform device creation firmware: arm_sdei: fix wrong of_node_put() in init function arm64: entry: remove unused register aliases arm64: smp: Fix compilation error
2019-01-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - procfs updates - various misc bits - lib/ updates - epoll updates - autofs - fatfs - a few more MM bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) mm/page_io.c: fix polled swap page in checkpatch: add Co-developed-by to signature tags docs: fix Co-Developed-by docs drivers/base/platform.c: kmemleak ignore a known leak fs: don't open code lru_to_page() fs/: remove caller signal_pending branch predictions mm/: remove caller signal_pending branch predictions arch/arc/mm/fault.c: remove caller signal_pending_branch predictions kernel/sched/: remove caller signal_pending branch predictions kernel/locking/mutex.c: remove caller signal_pending branch predictions mm: select HAVE_MOVE_PMD on x86 for faster mremap mm: speed up mremap by 20x on large regions mm: treewide: remove unused address argument from pte_alloc functions initramfs: cleanup incomplete rootfs scripts/gdb: fix lx-version string output kernel/kcov.c: mark write_comp_data() as notrace kernel/sysctl: add panic_print into sysctl panic: add options to print system info when panic happens bfs: extra sanity checking and static inode bitmap exec: separate MM_ANONPAGES and RLIMIT_STACK accounting ...
2019-01-04mm: treewide: remove unused address argument from pte_alloc functionsJoel Fernandes (Google)
Patch series "Add support for fast mremap". This series speeds up the mremap(2) syscall by copying page tables at the PMD level even for non-THP systems. There is concern that the extra 'address' argument that mremap passes to pte_alloc may do something subtle architecture related in the future that may make the scheme not work. Also we find that there is no point in passing the 'address' to pte_alloc since its unused. This patch therefore removes this argument tree-wide resulting in a nice negative diff as well. Also ensuring along the way that the enabled architectures do not do anything funky with the 'address' argument that goes unnoticed by the optimization. Build and boot tested on x86-64. Build tested on arm64. The config enablement patch for arm64 will be posted in the future after more testing. The changes were obtained by applying the following Coccinelle script. (thanks Julia for answering all Coccinelle questions!). Following fix ups were done manually: * Removal of address argument from pte_fragment_alloc * Removal of pte_alloc_one_fast definitions from m68k and microblaze. // Options: --include-headers --no-includes // Note: I split the 'identifier fn' line, so if you are manually // running it, please unsplit it so it runs for you. virtual patch @pte_alloc_func_def depends on patch exists@ identifier E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; type T2; @@ fn(... - , T2 E2 ) { ... } @pte_alloc_func_proto_noarg depends on patch exists@ type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1, T2); + T3 fn(T1); | - T3 fn(T1, T2, T4); + T3 fn(T1, T2); ) @pte_alloc_func_proto depends on patch exists@ identifier E1, E2, E4; type T1, T2, T3, T4; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ ( - T3 fn(T1 E1, T2 E2); + T3 fn(T1 E1); | - T3 fn(T1 E1, T2 E2, T4 E4); + T3 fn(T1 E1, T2 E2); ) @pte_alloc_func_call depends on patch exists@ expression E2; identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; @@ fn(... -, E2 ) @pte_alloc_macro depends on patch exists@ identifier fn =~ "^(__pte_alloc|pte_alloc_one|pte_alloc|__pte_alloc_kernel|pte_alloc_one_kernel)$"; identifier a, b, c; expression e; position p; @@ ( - #define fn(a, b, c) e + #define fn(a, b) e | - #define fn(a, b) e + #define fn(a) e ) Link: http://lkml.kernel.org/r/20181108181201.88826-2-joelaf@google.com Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Michal Hocko <mhocko@kernel.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04arm64: compat: Hook up io_pgetevents() for 32-bit tasksWill Deacon
Commit 73aeb2cbcdc9 ("ARM: 8787/1: wire up io_pgetevents syscall") hooked up the io_pgetevents() system call for 32-bit ARM, so we can do the same for the compat wrapper on arm64. Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64: compat: Don't pull syscall number from regs in arm_compat_syscallWill Deacon
The syscall number may have been changed by a tracer, so we should pass the actual number in from the caller instead of pulling it from the saved r7 value directly. Cc: <stable@vger.kernel.org> Cc: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64: compat: Avoid sending SIGILL for unallocated syscall numbersWill Deacon
The ARM Linux kernel handles the EABI syscall numbers as follows: 0 - NR_SYSCALLS-1 : Invoke syscall via syscall table NR_SYSCALLS - 0xeffff : -ENOSYS (to be allocated in future) 0xf0000 - 0xf07ff : Private syscall or -ENOSYS if not allocated > 0xf07ff : SIGILL Our compat code gets this wrong and ends up sending SIGILL in response to all syscalls greater than NR_SYSCALLS which have a value greater than 0x7ff in the bottom 16 bits. Fix this by defining the end of the ARM private syscall region and checking the syscall number against that directly. Update the comment while we're at it. Cc: <stable@vger.kernel.org> Cc: Dave Martin <Dave.Martin@arm.com> Reported-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64/sve: Disentangle <uapi/asm/ptrace.h> from <uapi/asm/sigcontext.h>Dave Martin
Currently, <uapi/asm/sigcontext.h> provides common definitions for describing SVE context structures that are also used by the ptrace definitions in <uapi/asm/ptrace.h>. For this reason, a #include of <asm/sigcontext.h> was added in ptrace.h, but it this turns out that this can interact badly with userspace code that tries to include ptrace.h on top of the libc headers (which may provide their own shadow definitions for sigcontext.h). To make the headers easier for userspace to consume, this patch bounces the common definitions into an __SVE_* namespace and moves them to a backend header <uapi/asm/sve_context.h> that can be included by the other headers as appropriate. This should allow ptrace.h to be used alongside libc's sigcontext.h (if any) without ill effects. This should make the situation unambiguous: <asm/sigcontext.h> is the header to include for the sigframe-specific definitions, while <asm/ptrace.h> is the header to include for ptrace-specific definitions. To avoid conflicting with existing usage, <asm/sigcontext.h> remains the canonical way to get the common definitions for SVE_VQ_MIN, sve_vq_from_vl() etc., both in userspace and in the kernel: relying on these being defined as a side effect of including just <asm/ptrace.h> was never intended to be safe. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64/sve: ptrace: Fix SVE_PT_REGS_OFFSET definitionDave Martin
SVE_PT_REGS_OFFSET is supposed to indicate the offset for skipping over the ptrace NT_ARM_SVE header (struct user_sve_header) to the start of the SVE register data proper. However, currently SVE_PT_REGS_OFFSET is defined in terms of struct sve_context, which is wrong: that structure describes the SVE header in the signal frame, not in the ptrace regset. This patch fixes the definition to use the ptrace header structure struct user_sve_header instead. By good fortune, the two structures are the same size anyway, so there is no functional or ABI change. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-04arm64: replace arm64-obj-* in Makefile with obj-*Masahiro Yamada
Use the standard obj-$(CONFIG_...) syntex. The behavior is still the same. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-01-03Remove 'type' argument from access_ok() functionLinus Torvalds
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03arm64: kaslr: Reserve size of ARM64_MEMSTART_ALIGN in linear regionYueyi Li
When KASLR is enabled (CONFIG_RANDOMIZE_BASE=y), the top 4K of kernel virtual address space may be mapped to physical addresses despite being reserved for ERR_PTR values. Fix the randomization of the linear region so that we avoid mapping the last page of the virtual address space. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: liyueyi <liyueyi@live.com> [will: rewrote commit message; merged in suggestion from Ard] Signed-off-by: Will Deacon <will.deacon@arm.com>