| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/late
Qualcomm ARM64 DT updates for v5.7
This brings initial support for the SM8250 and IPQ6018 platforms.
SDM845 gets audio, PCIe and IP-accelerator support, and the interconnect
providers are refactored. The Lenovo Yoga C630 has audio enabled and the
DB845c has PCIe, analog audio and low-speed interfaces enabled. The
SDM845 MTP has its display enabled and firmware location updated to
match linux-firmware.
SC7180 gains CPU topology and power properties. Interconnect providers,
eMMC, SD-card, multimedia clocks, display, Bluetooth, Venus are added.
Critical trip points are added as well as various fixes.
For MSM8916 FastRPC support is added, ETM power management and reserved
memory for Samsung A2015 are corrected.
MSM8996 switches to generic QMP phy driver for its UFS support. MSM8998
temporarily disables part of Coresight to boot without
clk_ignore_unused. CEQ for eMMC on QCS404 is enabled.
Fixes throughout the platforms to fix binding compliance, correct
compatibles for SDHCI nodes and add gpio-ranges.
* tag 'qcom-arm64-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (56 commits)
arm64: dts: qcom: sdm845-mtp: Relocate remoteproc firmware
arm64: dts: sdm845: add IPA information
arm64: dts: qcom: db845c: add analog audio support
arm64: dts: qcom: sdm845: add pinctrl nodes for quat i2s
arm64: dts: qcom: c630: Enable audio support
arm64: dts: qcom: sdm845: add apr nodes
arm64: dts: qcom: sdm845: add slimbus nodes
arm64: dts: qcom: sc7180: Update reg names for SDHC
arm64: dts: qcom: qcs404: Enable CQE support for eMMC
arm64: dts: msm8916: Add fastrpc node
arm64: dts: qcom: sm8250: Add sm8250 dts file
arm64: dts: qcom: msm8998-mtp: Disable funnel 4 and 5
arm64: dts: qcom: db845c: add Low speed expansion i2c and spi nodes
arm64: dts: qcom: apq8016-sbc: Remove wrong regulator supply
arm64: dts: qcom: sc7180: Added critical trip point Thermal-zones node
arm64: dts: qcom: msm8998: Fix cpu compatible
arm64: dts: qcom: sc7180: Add OSM L3 interconnect provider
arm64: dts: qcom: sdm845: Add OSM L3 interconnect provider
arm64: dts: sc7180: Add interconnect provider DT nodes
arm64: dts: qcom: msm8996: Use generic QMP driver for UFS
...
Link: https://lore.kernel.org/r/20200318043823.GA470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I accidentally merged this after requesting a different solution,
reverting now.
Link: https://patchwork.kernel.org/patch/11431397/
Fixes: 2cedfe1247c0 ("arm64: dts: specify console via command line")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.7 (round 2)
- G12[ab]: add SPI support, enable on odroid-n2
* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12b-odroid-n2: add SPIFC controller node
arm64: dts: khadas-vim3: add SPIFC controller node
arm64: dts: meson-g12: add the SPIFC nodes
arm64: dts: meson-g12: split emmc pins to select 4 or 8 bus width
arm64: dts: meson-g12-common: add spicc controller nodes
dt-bindings: clk: g12a-clkc: add SPICC SCLK Source clock IDs
dt-bindings: clk: meson: add the gxl internal dac gate
Link: https://lore.kernel.org/r/7hftdyhfq4.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt
mt2712:
- add real time clock node
mt8173:
- mark arch timer invalid in suspend
mt8183:
- add CPU idle states
- add watchdog node
- add dynamic power coefficient and cooling cells for all CPUs
mt8516:
- add basic support for the SoC
- add basic support for the pumpkin board
* tag 'v5.6-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
arm64: dts: add RTC nodes for MT2712
arm64: dts: mediatek: add pumpkin board dts
arm64: dts: mediatek: add dtsi for MT8516
arm64: dts: mt8183: Add #cooling-cells to CPU nodes
arm64: dts: mt8183: add/update dynamic power coefficients
arm64: dts: mediatek: rename scpsys nodes to power-controller
amr64: dts: mt8183: Add watchdog node
arm64: dts: mt8173: add arm,no-tick-in-suspend in timer
arm64: dts: mt8183: Enable CPU idle-states
Link: https://lore.kernel.org/r/c512b5cb-e639-1429-64db-9c1a53378c49@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt
Texas Instruments K3 SoC family changes for v5.7
- Add missing clocks to dwc3 nodes on am65x (fixes USB)
- Add DMA entries for main_spi0 on am65x
- Add phy-gmii-sel nodes for both am65x and j721e (towards ethernet
support)
- Add DMA entries for ADC for both am65x and j721e
- Add MCU system control module on j721e (needed by phy-gmii-sel)
* tag 'ti-k3-soc-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-j721e-mcu: add scm node and phy-gmii-sel nodes
arm64: dts: ti: k3-am65-mcu: add phy-gmii-sel node
arm64: dts: ti: k3-am65-mcu: Add DMA entries for ADC
arm64: dts: ti: k3-am65-main: Add DMA entries for main_spi0
arm64: dts: ti: k3-j721e-mcu-wakeup: Add DMA entries for ADC
arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes
Link: https://lore.kernel.org/r/4b6b7804-4bcb-07ba-5e76-6a411e1f457f@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt
SoCFPGA DTS updates for v5.7
- Increase NAND boot partition for Arria10
- Increase QSPI partition for Stratix10 and Agilex
* tag 'socfpga_dts_update_for_v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: increase the QSPI reg address for Stratix10 and Agilex
ARM: dts: socfpga: arria10: Increase boot partition size for NAND
Link: https://lore.kernel.org/r/20200318145957.30338-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 DTS update for 5.7:
- New support for Kontron LS1028A based boards and NXP i.MX8MP EVK.
- Add Ethernet PHY reset GPIO for imx8mm-evk and imx8mq-evk board.
- Add gpio-fan, thermal and Ethernet support for imx8mq-phanbell board.
- Add SNVS clock description to pwrkey device for i.MX8 SoCs.
- A number of updates on librem5-devkit board to add audio, proximity
sensor, lsm9ds1 mount matrix support, and improve WoWWAN, DVFS, SD
devices as well.
- A series of patches from Anson Huang to update i.MX8 EVK boards
for support of I2C PCA6416, thermal, GPIO LED, OPP table etc.
- Add PCIe device nodes for LX2160A and LS1028A SoC.
- Add FSPI deivce support for LX2160A evaluation boards.
- Add EEPROM and LTC3882 regulator support for lx2160a-cex7 board.
- Other small and random updates on LS1028A and i.MX8 support.
* tag 'imx-dt64-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
arm64: dts: ls1028a: disable the felix switch by default
arm64: dts: imx8mp: Add snvs clock to powerkey
arm64: dts: imx8mn: Add snvs clock to powerkey
arm64: dts: ls1028a: Add PCIe controller DT nodes
arm64: dts: ls1028a: sl28: add support for variant 2
arm64: dts: ls1028a: sl28: expose switch ports in KBox A-230-LS
arm64: dts: ls1028a: sl28: fix on-board EEPROMS
arm64: dts: freescale: sl28: add SPI flash
arm64: dts: imx8m: fix aips dts node
arm64: dts: imx8mn: Add CPU thermal zone support
arm64: dts: imx8mm: Add thermal zone support
arm64: dts: imx8mq-phanbell: Fix Ethernet PHY post-reset duration
arm64: dts: enable fspi in imx8mm dts
arm64: dts: imx8mn: align name for crypto child nodes
arm64: dts: lx2160aqds: Add FSPI node properties
arm64: dts: lx2160ardb: Update FSPI node properties
arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
arm64: dts: layerscape: add iommu-map property to pci nodes
arm64: dts: imx8mp-evk: Enable pca6416 on i2c3 bus
arm64: dts: imx8mp-evk: Add i2c3 support
...
Link: https://lore.kernel.org/r/20200318051918.32579-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into arm/dt
UniPhier ARM64 SoC DT updates for v5.7
- Rename nodes to avoid dt-schema warnings
- Enable SPI for PXs3 reference board
- Enable thermal monitor for PXs3 SoC
- Fix clock and reset of SPI nodes
* tag 'uniphier-dt64-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
arm64: dts: uniphier: Set SCSSI clock and reset IDs for each channel
arm64: dts: uniphier: Add nodes of thermal monitor and thermal zone for PXs3
arm64: dts: uniphier: Enable spi node for PXs3 reference board
arm64: dts: uniphier: rename NAND node names to follow json-schema
arm64: dts: uniphier: rename aidet node names to follow json-schema
arm64: dts: uniphier: change SD/eMMC node names to follow json-schema
Link: https://lore.kernel.org/r/CAK7LNASMD-zqNfG02WhU1LeAJevnjBv=oT2N_7y6C8w7kryotQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.7
- sound, bluetooth, thermal updates
- A1: add secure power domain nodes
- misc. cleanups
* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: add thermal zones to meson gx devices
arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi
arm64: dts: meson-g12b: fix N2/VIM3 audio card model names
arm64: dts: meson-gxbb-vega-s95: fix bluetooth node
arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes
arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap
arm64: dts: meson: fix gxm-khadas-vim2 wifi
arm64: dts: meson: sei510: fix sound card codec node
arm64: dts: meson: s400: fix sound card codec nodes
arm64: dts: meson: add pdm reset line
arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
arm64: dts: amlogic: add rc-videostrong-kii-pro keymap
arm64: dts: meson: a1: add secure power domain controller
Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Support for the rk3399-based Pinebook Pro, eDP support and power-tree for
the rk3399 evaluation board, a big number of fixes for issues found by
checking against the new yaml dt-bindings.
And on the smaller side, fixes for network transfers, the mute gpio
on rk3328 gets actually described and one lvds fix on the px30 and
the rk3399-hugsun board gets IR and power led.
* tag 'v5.7-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
arm64: dts: rockchip: Add Hugsun X99 power led
arm64: dts: rockchip: Add Hugsun X99 IR receiver
arm64: dts: rockchip: remove clock-names property from 'generic-ohci' nodes
arm64: dts: rockchip: remove clock-names property from 'generic-ehci' nodes
arm64: dts: rockchip: remove properties from spdif node RK3399 Excavator
arm64: dts: add bus to rockchip amba nodenames
arm64: dts: rockchip: replace clock-freq-min-max by max-frequency
arm64: dts: rockchip: fix vqmmc-supply property name for rk3399 puma
arm64: dts: remove no-emmc from mmc node for Rockchip PX5 EVB
arm64: dts: rockchip: remove rockchip,grf from vop nodes for px30
arm64: dts: rockchip: remove max-freq from &spi1 node for Hugsun X99
arm64: dts: rockchip: fix compatible property for rk3399-evb
arm64: dts: rockchip: Add initial support for Pinebook Pro
dt-bindings: Add doc for Pine64 Pinebook Pro
arm64: dts: rockchip: Enable eDP display on rk3399 evb
arm64: dts: rockchip: remove enable-gpio of backlight on rk3399 evb
arm64: dts: rockchip: Add pmic dt tree for rk3399 evb
arm64: dts: rockchip: remove dvs2 pinctrl for pmic on rk3399 evb
arm64: dts: rockchip: fix px30 lvds ports
arm64: dts: rockchip: Add txpbl node for RK3399/RK3328
...
Link: https://lore.kernel.org/r/27799037.pT45f1LVdF@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull networking fixes from David Miller:
1) Fix deadlock in bpf_send_signal() from Yonghong Song.
2) Fix off by one in kTLS offload of mlx5, from Tariq Toukan.
3) Add missing locking in iwlwifi mvm code, from Avraham Stern.
4) Fix MSG_WAITALL handling in rxrpc, from David Howells.
5) Need to hold RTNL mutex in tcindex_partial_destroy_work(), from Cong
Wang.
6) Fix producer race condition in AF_PACKET, from Willem de Bruijn.
7) cls_route removes the wrong filter during change operations, from
Cong Wang.
8) Reject unrecognized request flags in ethtool netlink code, from
Michal Kubecek.
9) Need to keep MAC in reset until PHY is up in bcmgenet driver, from
Doug Berger.
10) Don't leak ct zone template in act_ct during replace, from Paul
Blakey.
11) Fix flushing of offloaded netfilter flowtable flows, also from Paul
Blakey.
12) Fix throughput drop during tx backpressure in cxgb4, from Rahul
Lakkireddy.
13) Don't let a non-NULL skb->dev leave the TCP stack, from Eric
Dumazet.
14) TCP_QUEUE_SEQ socket option has to update tp->copied_seq as well,
also from Eric Dumazet.
15) Restrict macsec to ethernet devices, from Willem de Bruijn.
16) Fix reference leak in some ethtool *_SET handlers, from Michal
Kubecek.
17) Fix accidental disabling of MSI for some r8169 chips, from Heiner
Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build
net: ena: Add PCI shutdown handler to allow safe kexec
selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED
selftests/net: add missing tests to Makefile
r8169: re-enable MSI on RTL8168c
net: phy: mdio-bcm-unimac: Fix clock handling
cxgb4/ptp: pass the sign of offset delta in FW CMD
net: dsa: tag_8021q: replace dsa_8021q_remove_header with __skb_vlan_pop
net: cbs: Fix software cbs to consider packet sending time
net/mlx5e: Do not recover from a non-fatal syndrome
net/mlx5e: Fix ICOSQ recovery flow with Striding RQ
net/mlx5e: Fix missing reset of SW metadata in Striding RQ reset
net/mlx5e: Enhance ICOSQ WQE info fields
net/mlx5_core: Set IB capability mask1 to fix ib_srpt connection failure
selftests: netfilter: add nfqueue test case
netfilter: nft_fwd_netdev: allow to redirect to ifb via ingress
netfilter: nft_fwd_netdev: validate family and chain type
netfilter: nft_set_rbtree: Detect partial overlaps on insertion
netfilter: nft_set_rbtree: Introduce and use nft_rbtree_interval_start()
netfilter: nft_set_pipapo: Separate partial and complete overlap cases on insertion
...
|
|
mvebu dt64 for 5.7 (part 1)
Improve network support on two Armada 8040 based board:
Clearfog GT 8 and Macchiatobin.
Add ethernet alias on Espressobin for U-Boot support.
Fix various dt compilation issue or warning.
* tag 'mvebu-dt64-5.7-1' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: Fix cpu compatible for AP807-quad
arm64: dts: marvell: fix non-existed cpu referrence in armada-ap806-dual.dtsi
arm64: dts: marvell: build ESPRESSObin variants
arm64: dts: marvell: espressobin: indicate dts version
arm64: dts: marvell: espressobin: add ethernet alias
arm64: dts: mcbin: support 2W SFP modules
arm64: dts: clearfog-gt-8k: set gigabit PHY reset deassert delay
Link: https://lore.kernel.org/r/87h7yqx7w2.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.7-rc1
These changes add support for the XUSB pad controller, as well as the
XUSB controller on Tegra194. Furthermore, USB device mode is supported
across Tegra210 and Tegra186 boards. PCIe endpoint mode support is added
for the Jetson AGX Xavier platform.
Various minor fixes eliminate warnings on boot related to missing power
supplies for some devices.
* tag 'tegra-for-5.7-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add support for PCIe endpoint mode in P2972-0000 platform
arm64: tegra: Add PCIe endpoint controllers nodes for Tegra194
arm64: tegra: Add ethernet alias on Jetson TX1
arm64: tegra: Populate LP8557 backlight regulator
arm64: tegra: Fix Tegra186 SOR supply
arm64: tegra: Add EEPROM supplies
arm64: tegra: Enable I2C controller for EEPROM
arm64: tegra: smaug: Change clk_out_2 provider to PMC
arm64: tegra: Add clock-cells property to Tegra PMC node
arm64: tegra: Enable XUDC node on Jetson Nano
arm64: tegra: Update OTG port entries for Jetson Nano
arm64: tegra: Enable XUDC node on Jetson TX2
arm64: tegra: Add XUDC node for Tegra186
arm64: tegra: Enable XUDC on Jetson TX1
arm64: tegra: Add XUDC node for Tegra210
arm64: tegra: Update OTG port entries for Jetson TX2
arm64: tegra: Update OTG port entries for Jetson TX1
arm64: tegra: Enable XUSB host in P2972-0000 board
arm64: tegra: Add XUSB and pad controller on Tegra194
arm64: tegra: Fix Tegra194 PCIe compatible string
Link: https://lore.kernel.org/r/20200313165848.2915133-8-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.7 (take two)
- Thermal support for R-Car M3-W+,
- Support for the M3ULCB board with R-Car M3-W+,
- CPUIdle support for R-Car M3-N and E3,
- Display support for the HiHope RZ/G2M board,
- A minor fix.
* tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores
arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores
arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address
arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+
arm64: dts: renesas: r8a77961: Add thermal nodes
Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner Device Tree Changes for v5.7
A fairly large set of changes for v5.7, including some new devices.
SoC specific changes:
- SPI on H6 SoC enabled
- Thermal sensor on R40 SoC enabled
- Deinterlace core hardware on A64 SoC enabled
- Redundant assigned-clocks properties removed
- required clock rates are now enforced by drivers
- LVDS panel support on A20 SoC enabled
- PMU compatible fixed for H5 and H6 SoCs
- Thermal trip points added for A83T and H5 SoCs
- (Image) Rotation core hardware on A83T and A64 SoCs enabled
Device specific changes:
- Pine64 PineTab and PinePhone added
- Various cleanups and improvements for Pine64 PineBook
- GPIO pin bank regulator supplies added for A64-OlinXino
- eMMC enabled on Orange Pi 3
- PocketBook Touch Lux 3 added
- Linutronix Testbox v2 added
- Ethernet enabled on Orange Pi One Plus
- HDMI enabled on H6-based Orange Pi boards
* tag 'sunxi-dt-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (46 commits)
arm64: dts: allwinner: a64: add node for rotation core
ARM: dts: sun8i: a83t: Add device node for rotation core
arm64: dts: allwinner: a64: Fix display clock register range
ARM: dts: sunxi: Fix DE2 clocks register range
arm64: dts: allwinner: h6: orangepi: Enable HDMI
arm64: dts: allwinner: h6: orangepi-one-plus: Enable ethernet
arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
arm64: dts: allwinner: Add initial support for Pine64 PinePhone
dt-bindings: arm: sunxi: Add PinePhone 1.0 and 1.1 bindings
arm64: dts: sun50i-a64: Add i2c2 pins
ARM: dts: sunxi: h3/h5: add r_pwm node
arm64: allwinner: a64: enable LCD-related hardware for Pinebook
ARM: dts: sun8i-a83t: Add thermal trip points/cooling maps
ARM: dts: sun8i-h3: Add thermal trip points/cooling maps
arm64: dts: allwinner: h6: Fix PMU compatible
arm64: dts: allwinner: h5: Fix PMU compatible
ARM: dts: sun8i-a83t-tbs-a711: Drop superfluous dr_mode
arm64: dts: sun50i-h5-orange-pi-pc2: Add CPUX voltage regulator
ARM: dts: sun5i: Add PocketBook Touch Lux 3 support
dt-bindings: arm: sunxi: Add PocketBook Touch Lux 3
...
Link: https://lore.kernel.org/r/20200313055459.GA19820@wens.csie.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The SPRD serial driver need to know which serial port would be used as
console in an early period during initialization, otherwise console
init would fail since we added this feature[1].
So this patch add console to command line via devicetree.
[1] https://lore.kernel.org/lkml/20190826072929.7696-4-zhang.lyra@gmail.com/
Link: https://lore.kernel.org/r/20200311112120.30890-1-zhang.lyra@gmail.com
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into arm/dt
Versatile DTS updates for the v5.7 series take one:
- Schema validation for the top level of all ARM reference
designs: Integrator, Versatile, RealView, Juno.
- Clean up some node names in the trees so they pass
validation fine.
- Drop the old text bindings.
- A top level DMA ranges patch from Rob.
* tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM/arm64: dts: Rename SMB bus to just bus
dt-bindings: arm: Drop the non-YAML bindings
dt-bindings: arm: Add Versatile Express and Juno YAML schema
dt-bindings: arm: Add RealView YAML schema
dt-bindings: arm: Add Versatile YAML schema
dt-bindings: arm: Add Integrator YAML schema
ARM: dts: RealView: Fix the name of the SoC node
ARM: dts: Versatile: Use syscon as node name for IB2
ARM: dts: integratorap: Remove top level dma-ranges
Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM64 DT updates for v5.7
- CryptoCell support for R-Car M3-W, M3-W+, M3-N, E3, and D3,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm64-dt-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg2: Add reset control properties for display
arm64: dts: renesas: rcar-gen3: Add reset control properties for display
arm64: dts: renesas: Remove use of ARCH_R8A7795
arm64: dts: renesas: rcar-gen3: Add CCREE nodes
arm64: dts: renesas: rcar-gen3: Replace "vsps" by "renesas,vsps"
arm: dts: renesas: r8a77980: Remove r8a77970 DU compatible
Link: https://lore.kernel.org/r/20200226110221.19288-5-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
arm/soc
arm64: soc: ZynqMP SoC changes for v5.7
- Change firmware dependency to be able to disable it
* tag 'zynqmp-soc-for-v5.7' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Make zynqmp_firmware driver optional
include: linux: firmware: Correct config dependency of zynqmp_eemi_ops
Link: https://lore.kernel.org/r/ecef6de5-8318-9f88-db8c-7c33fe44901f@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Broadcom/stblinux into arm/soc
This pull request contains Broadcom ARM64 SoCs changes for 5.7, please
pull the following:
- Geert drops the non-existent HAVE_ARM_ARCH_TIMER symbol select for
ARCH_BCM2835
* tag 'arm-soc/for-5.7/soc-arm64' of https://github.com/Broadcom/stblinux:
arm64: bcm2835: Drop select of nonexistent HAVE_ARM_ARCH_TIMER
Link: https://lore.kernel.org/r/20200311212012.9418-4-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/config
i.MX defconfig changes for 5.7:
- A seris from Li Yang to make defconfig useful for NXP LS family SoCs.
Most drivers are built as module there, but those helping boot system
with NFS are enabled built-in.
- Enable i.MX8MP pinctrl and i.MX8MM thermal driver support in
defconfig.
- Enable i.MX DRM driver support for multi_v7_defconfig.
- Enable ATMEL_MXT and AD7879 touch support for imx_v6_v7_defconfig.
* tag 'imx-defconfig-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
arm64: defconfig: Enable e1000 device
arm64: defconfig: Enable PHY devices used on QorIQ boards
arm64: defconfig: Enable RTC devices for QorIQ boards
arm64: defconfig: Enable flash device drivers for QorIQ boards
arm64: defconfig: Enable ARM Mali display driver
arm64: defconfig: Enable QorIQ GPIO driver
arm64: defconfig: Enable QorIQ IFC NAND controller driver
arm64: defconfig: Enable ARM SBSA watchdog driver
arm64: defconfig: Enable QorIQ cpufreq driver
arm64: defconfig: Enable NXP/FSL SPI controller drivers
arm64: defconfig: Enable ENETC Ethernet controller and FELIX switch
arm64: defconfig: Enable QorIQ DPAA2 drivers
arm64: defconfig: Enable QorIQ DPAA1 drivers
arm64: defconfig: Enable NXP flexcan driver
arm64: defconfig: run through savedefconfig for ordering
arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
arm64: defconfig: add i.MX system controller thermal support
ARM: multi_v7_defconfig: enable drm imx support
arm64: defconfig: Enable CONFIG_PCIE_LAYERSCAPE_GEN4
ARM: imx_v6_v7_defconfig: Enable TOUCHSCREEN_AD7879
...
Link: https://lore.kernel.org/r/20200318051918.32579-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/config
Qualcomm ARM64 defconfig updates for v5.7
Enable SDM845 audio, display and gpu related configs and the Truly
NT35597 panel driver, all relevant for various SDM845 based boards.
Enable IPQ6018 clocks and pinctrl and the pmic vibrator driver for
PM8916.
* tag 'qcom-arm64-defconfig-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: Enable Qualcomm SDM845 audio configs
arm64: defconfig: Enable Truly NT35597 WQXGA panel
arm64: defconfig: Enable Qualcomm SDM845 display and gpu clocks
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
arm64: defconfig: Enable Qualcomm PM8XXX vibrator support
Link: https://lore.kernel.org/r/20200318043856.GB470201@yoga
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://github.com/hisilicon/linux-hisi into arm/config
ARM64: hisilicon: defconfig updates for 5.7
- Enable MEGARAID_SAS to be able to boot from
disk for the D06CS development board
* tag 'hisi-arm64-defconfig-for-5.7' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable MEGARAID_SAS
Link: https://lore.kernel.org/r/5E61F3C1.1080909@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/config
Renesas ARM64 defconfig updates for v5.7
- Restore R-Car M3-W support,
- Enable additional support for Renesas platforms.
* tag 'renesas-arm64-defconfig-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable additional support for Renesas platforms
arm64: defconfig: Replace ARCH_R8A7796 by ARCH_R8A77960
Link: https://lore.kernel.org/r/20200226110221.19288-4-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
These two device trees were either missed or added after
the commit correcting the "entry-method" from
"arm,psci" to just "psci" as per the binding.
Link: https://lore.kernel.org/r/20200322115846.16265-1-linus.walleij@linaro.org
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chunyan Zhang <chunyan.zhang@unisoc.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Use bringup_hibernate_cpu() instead of open coding it.
[ tglx: Split out the core change ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200323135110.30522-9-qais.yousef@arm.com
|
|
Use `reboot_cpu` variable instead of hardcoding 0 as the reboot cpu in
machine_shutdown().
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200323135110.30522-8-qais.yousef@arm.com
|
|
disable_nonboot_cpus() is not safe to use when doing machine_down(),
because it relies on freeze_secondary_cpus() which in turn is
a suspend/resume related freeze and could abort if the logic detects any
pending activities that can prevent finishing the offlining process.
Beside disable_nonboot_cpus() is dependent on CONFIG_PM_SLEEP_SMP which
is an othogonal config to rely on to ensure this function works
correctly.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200323135110.30522-7-qais.yousef@arm.com
|
|
* for-next/kernel-ptrauth:
: Return address signing - in-kernel support
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
arm64: ptrauth: Add bootup/runtime flags for __cpu_setup
arm64: install user ptrauth keys at kernel exit time
arm64: rename ptrauth key structures to be user-specific
arm64: cpufeature: add pointer auth meta-capabilities
arm64: cpufeature: Fix meta-capability cpufeature check
|
|
* for-next/asm-cleanups:
: Various asm clean-ups (alignment, mov_q vs ldr, .idmap)
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
|
|
* for-next/asm-annotations:
: Modernise arm64 assembly annotations
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Mark call_smc_arch_workaround_1 as __maybe_unused
arm64: entry-ftrace.S: Fix missing argument for CONFIG_FUNCTION_GRAPH_TRACER=y
arm64: vdso32: Convert to modern assembler annotations
arm64: vdso: Convert to modern assembler annotations
arm64: sdei: Annotate SDEI entry points using new style annotations
arm64: kvm: Modernize __smccc_workaround_1_smc_start annotations
arm64: kvm: Modernize annotation for __bp_harden_hyp_vecs
arm64: kvm: Annotate assembly using modern annoations
arm64: kernel: Convert to modern annotations for assembly data
arm64: head: Annotate stext and preserve_boot_args as code
arm64: head.S: Convert to modern annotations for assembly functions
arm64: ftrace: Modernise annotation of return_to_handler
arm64: ftrace: Correct annotation of ftrace_caller assembly
arm64: entry-ftrace.S: Convert to modern annotations for assembly functions
arm64: entry: Additional annotation conversions for entry.S
arm64: entry: Annotate ret_from_fork as code
arm64: entry: Annotate vector table and handlers as code
arm64: crypto: Modernize names for AES function macros
arm64: crypto: Modernize some extra assembly annotations
|
|
'for-next/amu', 'for-next/final-cap-helper', 'for-next/cpu_ops-cleanup', 'for-next/misc' and 'for-next/perf' into for-next/core
* for-next/memory-hotremove:
: Memory hot-remove support for arm64
arm64/mm: Enable memory hot remove
arm64/mm: Hold memory hotplug lock while walking for kernel page table dump
* for-next/arm_sdei:
: SDEI: fix double locking on return from hibernate and clean-up
firmware: arm_sdei: clean up sdei_event_create()
firmware: arm_sdei: Use cpus_read_lock() to avoid races with cpuhp
firmware: arm_sdei: fix possible double-lock on hibernate error path
firmware: arm_sdei: fix double-lock on hibernate with shared events
* for-next/amu:
: ARMv8.4 Activity Monitors support
clocksource/drivers/arm_arch_timer: validate arch_timer_rate
arm64: use activity monitors for frequency invariance
cpufreq: add function to get the hardware max frequency
Documentation: arm64: document support for the AMU extension
arm64/kvm: disable access to AMU registers from kvm guests
arm64: trap to EL1 accesses to AMU counters from EL0
arm64: add support for the AMU extension v1
* for-next/final-cap-helper:
: Introduce cpus_have_final_cap_helper(), migrate arm64 KVM to it
arm64: kvm: hyp: use cpus_have_final_cap()
arm64: cpufeature: add cpus_have_final_cap()
* for-next/cpu_ops-cleanup:
: cpu_ops[] access code clean-up
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
* for-next/misc:
: Various fixes and clean-ups
arm64: define __alloc_zeroed_user_highpage
arm64/kernel: Simplify __cpu_up() by bailing out early
arm64: remove redundant blank for '=' operator
arm64: kexec_file: Fixed code style.
arm64: add blank after 'if'
arm64: fix spelling mistake "ca not" -> "cannot"
arm64: entry: unmask IRQ in el0_sp()
arm64: efi: add efi-entry.o to targets instead of extra-$(CONFIG_EFI)
arm64: csum: Optimise IPv6 header checksum
arch/arm64: fix typo in a comment
arm64: remove gratuitious/stray .ltorg stanzas
arm64: Update comment for ASID() macro
arm64: mm: convert cpu_do_switch_mm() to C
arm64: fix NUMA Kconfig typos
* for-next/perf:
: arm64 perf updates
arm64: perf: Add support for ARMv8.5-PMU 64-bit counters
KVM: arm64: limit PMU version to PMUv3 for ARMv8.1
arm64: cpufeature: Extract capped perfmon fields
arm64: perf: Clean up enable/disable calls
perf: arm-ccn: Use scnprintf() for robustness
arm64: perf: Support new DT compatibles
arm64: perf: Refactor PMU init callbacks
perf: arm_spe: Remove unnecessary zero check on 'nr_pages'
|
|
New assembly annotations have recently been introduced which aim to
make the way we describe symbols in assembly more consistent. Recently the
arm64 assembler was converted to use these but install_el2_stub was missed.
Signed-off-by: Mark Brown <broonie@kernel.org>
[catalin.marinas@arm.com: changed to SYM_L_LOCAL]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This introduces get_cpu_ops() to return the CPU operations according to
the given CPU index. For now, it simply returns the @cpu_ops[cpu] as
before. Also, helper function __cpu_try_die() is introduced to be shared
by cpu_die() and ipi_cpu_crash_stop(). So it shouldn't introduce any
functional changes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
|
|
This renames cpu_read_ops() to init_cpu_ops() as the function is only
called in initialization phase. Also, we will introduce get_cpu_ops() in
the subsequent patches, to retireve the CPU operation by the given CPU
index. The usage of cpu_read_ops() and get_cpu_ops() are difficult to be
distinguished from their names.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
It's obvious we needn't declare the corresponding CPU operation when
CONFIG_ARM64_ACPI_PARKING_PROTOCOL is disabled, even it doesn't cause
any compiling warnings.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Just like for VLPIs, it is beneficial to avoid trapping on WFI when the
vcpu is using the GICv4.1 SGIs.
Add such a check to vcpu_clear_wfx_traps().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-23-maz@kernel.org
|
|
Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.
These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.
Of course, we only support Group-1 for now...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
|
|
This datum is not referenced from .idmap.text: it does not need to be
mapped in idmap. Lets move it to .rodata as it is never written to after
early boot of the primary CPU.
(Maybe .data.ro_after_init would be cleaner though?)
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In practice, this requires only 2 instructions, or even only 1 for
the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values
needed more than 2 instructions and it was already converted to mov_q
by 95b3f74bec203804658e17f86fe20755bb8abcb9.
Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"This fixes a correctness bug in the ARM64 version of ChaCha for
lib/crypto used by WireGuard"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/chacha - correctly walk through blocks
|
|
We need the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Enable Clang Compilation for the vdso32 library.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> # build
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-27-vincenzo.frascino@arm.com
|
|
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Refactor the vdso32 implementation to include common headers.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-22-vincenzo.frascino@arm.com
|
|
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Refactor the vdso implementation to include common headers.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-21-vincenzo.frascino@arm.com
|
|
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/processor.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-20-vincenzo.frascino@arm.com
|
|
The compat vdso library had some checks that are not anymore relevant.
Remove the unused code from the compat vDSO library.
Note: This patch is preparatory for a future one that will introduce
asm/vdso/processor.h on arm64.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20200317122220.30393-19-vincenzo.frascino@arm.com
Link: https://lkml.kernel.org/r/20200320145351.32292-19-vincenzo.frascino@arm.com
|
|
The vDSO library should only include the necessary headers required for
a userspace library (UAPI and a minimal set of kernel headers). To make
this possible it is necessary to isolate from the kernel headers the
common parts that are strictly necessary to build the library.
Introduce asm/vdso/clocksource.h to contain all the arm64 specific
functions that are suitable for vDSO inclusion.
This header will be required by a future patch that will generalize
vdso/clocksource.h.
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200320145351.32292-7-vincenzo.frascino@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix panic() when it occurs during secondary CPU startup
- Fix "kpti=off" when KASLR is enabled
- Fix howler in compat syscall table for vDSO clock_getres() fallback
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Fix syscall number of compat_clock_getres
arm64: kpti: Fix "kpti=off" when KASLR is enabled
arm64: smp: fix crash_smp_send_stop() behaviour
arm64: smp: fix smp_send_stop() behaviour
|
