summaryrefslogtreecommitdiff
path: root/arch/arm64/kvm
AgeCommit message (Collapse)Author
2014-07-11arm64: KVM: common infrastructure for handling AArch32 CP14/CP15Marc Zyngier
As we're about to trap a bunch of CP14 registers, let's rework the CP15 handling so it can be generalized and work with multiple tables. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: add trap handlers for AArch64 debug registersMarc Zyngier
Add handlers for all the AArch64 debug registers that are accessible from EL0 or EL1. The trapping code keeps track of the state of the debug registers, allowing for the switch code to implement a lazy switching strategy. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: rename pm_fake handler to trap_raz_wiMarc Zyngier
pm_fake doesn't quite describe what the handler does (ignoring writes and returning 0 for reads). As we're about to use it (a lot) in a different context, rename it with a (admitedly cryptic) name that make sense for all users. Reviewed-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM64: KVM: fix big endian issue in access_vm_reg for 32bit guestVictor Kamensky
Fix issue with 32bit guests running on top of BE KVM host. Indexes of high and low words of 64bit cp15 register are swapped in case of big endian code, since 64bit cp15 state is restored or saved with double word write or read instruction. Define helper macro to access low words of 64bit cp15 register. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM64: KVM: set and get of sys registers in BE caseVictor Kamensky
Since size of all sys registers is always 8 bytes. Current code is actually endian agnostic. Just clean it up a bit. Removed comment about little endian. Change type of pointer from 'void *' to 'u64 *' to enforce stronger type checking. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11ARM64: KVM: store kvm_vcpu_fault_info est_el2 as wordVictor Kamensky
esr_el2 field of struct kvm_vcpu_fault_info has u32 type. It should be stored as word. Current code works in LE case because existing puts least significant word of x1 into esr_el2, and it puts most significant work of x1 into next field, which accidentally is OK because it is updated again by next instruction. But existing code breaks in BE case. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: vgic: enable GICv2 emulation on top on GICv3 hardwareMarc Zyngier
Add the last missing bits that enable GICv2 emulation on top of GICv3 hardware. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: vgic: add GICv3 world switchMarc Zyngier
Introduce the GICv3 world switch code used to save/restore the GICv3 context. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11KVM: ARM: vgic: add the GICv3 backendMarc Zyngier
Introduce the support code for emulating a GICv2 on top of GICv3 hardware. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: move HCR_EL2.{IMO,FMO} manipulation into the vgic switch codeMarc Zyngier
GICv3 requires the IMO and FMO bits to be tightly coupled with some of the interrupt controller's register switch. In order to have similar code paths, move the manipulation of these bits to the GICv2 switch code. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: split GICv2 world switch from hyp codeMarc Zyngier
Move the GICv2 world switch code into its own file, and add the necessary indirection to the arm64 switch code. Also introduce a new type field to the vgic_params structure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: remove __kvm_hyp_code_{start,end} from hyp.SMarc Zyngier
We already have __hyp_text_{start,end} to express the boundaries of the HYP text section, and __kvm_hyp_code_{start,end} are getting in the way of a more modular world switch code. Just turn __kvm_hyp_code_{start,end} into #defines mapping the linker-emited symbols. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11KVM: ARM: vgic: split GICv2 backend from the main vgic codeMarc Zyngier
Brutally hack the innocent vgic code, and move the GICv2 specific code to its own file, using vgic_ops and vgic_params as a way to pass information between the two blocks. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11KVM: arm/arm64: vgic: move GICv2 registers to their own structureMarc Zyngier
In order to make way for the GICv3 registers, move the v2-specific registers to their own structure. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-07-11arm64: KVM: allow export and import of generic timer regsAlex Bennée
For correct guest suspend/resume behaviour we need to ensure we include the generic timer registers for 64 bit guests. As CONFIG_KVM_ARM_TIMER is always set for arm64 we don't need to worry about null implementations. However I have re-jigged the kvm_arm_timer_set/get_reg declarations to be in the common include/kvm/arm_arch_timer.h headers. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-07-11arm64: KVM: export demux regids as KVM_REG_ARM64Alex Bennée
I suspect this is a -ECUTPASTE fault from the initial implementation. If we don't declare the register ID to be KVM_REG_ARM64 the KVM_GET_ONE_REG implementation kvm_arm_get_reg() returns -EINVAL and hilarity ensues. The kvm/api.txt document describes all arm64 registers as starting with 0x60xx... (i.e KVM_REG_ARM64). Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2014-06-06Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into next Pull arm64 updates from Catalin Marinas: - Optimised assembly string/memory routines (based on the AArch64 Cortex Strings library contributed to glibc but re-licensed under GPLv2) - Optimised crypto algorithms making use of the ARMv8 crypto extensions (together with kernel API for using FPSIMD instructions in interrupt context) - Ftrace support - CPU topology parsing from DT - ESR_EL1 (Exception Syndrome Register) exposed to user space signal handlers for SIGSEGV/SIGBUS (useful to emulation tools like Qemu) - 1GB section linear mapping if applicable - Barriers usage clean-up - Default pgprot clean-up Conflicts as per Catalin. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (57 commits) arm64: kernel: initialize broadcast hrtimer based clock event device arm64: ftrace: Add system call tracepoint arm64: ftrace: Add CALLER_ADDRx macros arm64: ftrace: Add dynamic ftrace support arm64: Add ftrace support ftrace: Add arm64 support to recordmcount arm64: Add 'notrace' attribute to unwind_frame() for ftrace arm64: add __ASSEMBLY__ in asm/insn.h arm64: Fix linker script entry point arm64: lib: Implement optimized string length routines arm64: lib: Implement optimized string compare routines arm64: lib: Implement optimized memcmp routine arm64: lib: Implement optimized memset routine arm64: lib: Implement optimized memmove routine arm64: lib: Implement optimized memcpy routine arm64: defconfig: enable a few more common/useful options in defconfig ftrace: Make CALLER_ADDRx macros more generic arm64: Fix deadlock scenario with smp_send_stop() arm64: Fix machine_shutdown() definition arm64: Support arch_irq_work_raise() via self IPIs ...
2014-05-25arm64: KVM: Enable minimalistic support for Cortex-A53Marc Zyngier
In order to allow KVM to run on Cortex-A53 implementations, wire the minimal support required. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-05-09arm64: kvm: use inner-shareable barriers for inner-shareable maintenanceWill Deacon
In order to ensure completion of inner-shareable maintenance instructions (cache and TLB) on AArch64, we can use the -ish suffix to the dsb instruction. This patch relaxes our dsb sy instructions to dsb ish where possible. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-09arm64: barriers: make use of barrier options with explicit barriersWill Deacon
When calling our low-level barrier macros directly, we can often suffice with more relaxed behaviour than the default "all accesses, full system" option. This patch updates the users of dsb() to specify the option which they actually require. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-04-30ARM/ARM64: KVM: Make kvm_psci_call() return convention more flexibleAnup Patel
Currently, the kvm_psci_call() returns 'true' or 'false' based on whether the PSCI function call was handled successfully or not. This does not help us emulate system-level PSCI functions where the actual emulation work will be done by user space (QEMU or KVMTOOL). Examples of such system-level PSCI functions are: PSCI v0.2 SYSTEM_OFF and SYSTEM_RESET. This patch updates kvm_psci_call() to return three types of values: 1) > 0 (success) 2) = 0 (success but exit to user space) 3) < 0 (errors) Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-04-02Merge tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm updates from Paolo Bonzini: "PPC and ARM do not have much going on this time. Most of the cool stuff, instead, is in s390 and (after a few releases) x86. ARM has some caching fixes and PPC has transactional memory support in guests. MIPS has some fixes, with more probably coming in 3.16 as QEMU will soon get support for MIPS KVM. For x86 there are optimizations for debug registers, which trigger on some Windows games, and other important fixes for Windows guests. We now expose to the guest Broadwell instruction set extensions and also Intel MPX. There's also a fix/workaround for OS X guests, nested virtualization features (preemption timer), and a couple kvmclock refinements. For s390, the main news is asynchronous page faults, together with improvements to IRQs (floating irqs and adapter irqs) that speed up virtio devices" * tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits) KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8 KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode KVM: PPC: Book3S HV: Return ENODEV error rather than EIO KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state KVM: PPC: Book3S HV: Add transactional memory support KVM: Specify byte order for KVM_EXIT_MMIO KVM: vmx: fix MPX detection KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write KVM: s390: clear local interrupts at cpu initial reset KVM: s390: Fix possible memory leak in SIGP functions KVM: s390: fix calculation of idle_mask array size KVM: s390: randomize sca address KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP KVM: Bump KVM_MAX_IRQ_ROUTES for s390 KVM: s390: irq routing for adapter interrupts. KVM: s390: adapter interrupt sources ...
2014-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull ARM64 updates from Catalin Marinas: - KGDB support for arm64 - PCI I/O space extended to 16M (in preparation of PCIe support patches) - Dropping ZONE_DMA32 in favour of ZONE_DMA (we only need one for the time being), together with swiotlb late initialisation to correctly setup the bounce buffer - DMA API cache maintenance support (not all ARMv8 platforms have hardware cache coherency) - Crypto extensions advertising via ELF_HWCAP2 for compat user space - Perf support for dwarf unwinding in compat mode - asm/tlb.h converted to the generic mmu_gather code - asm-generic rwsem implementation - Code clean-up * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (42 commits) arm64: Remove pgprot_dmacoherent() arm64: Support DMA_ATTR_WRITE_COMBINE arm64: Implement custom mmap functions for dma mapping arm64: Fix __range_ok macro arm64: Fix duplicated Kconfig entries arm64: mm: Route pmd thp functions through pte equivalents arm64: rwsem: use asm-generic rwsem implementation asm-generic: rwsem: de-PPCify rwsem.h arm64: enable generic CPU feature modalias matching for this architecture arm64: smp: make local symbol static arm64: debug: make local symbols static ARM64: perf: support dwarf unwinding in compat mode ARM64: perf: add support for frame pointer unwinding in compat mode ARM64: perf: add support for perf registers API arm64: Add boot time configuration of Intermediate Physical Address size arm64: Do not synchronise I and D caches for special ptes arm64: Make DMA coherent and strongly ordered mappings not executable arm64: barriers: add dmb barrier arm64: topology: Implement basic CPU topology support arm64: advertise ARMv8 extensions to 32-bit compat ELF binaries ...
2014-03-13arm64: Add boot time configuration of Intermediate Physical Address sizeRadha Mohan Chintakuntla
ARMv8 supports a range of physical address bit sizes. The PARange bits from ID_AA64MMFR0_EL1 register are read during boot-time and the intermediate physical address size bits are written in the translation control registers (TCR_EL1 and VTCR_EL2). There is no change in the VA bits and levels of translation. Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Will Deacon <Will.deacon@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-03-03arm64: KVM: flush VM pages before letting the guest enable cachesMarc Zyngier
When the guest runs with caches disabled (like in an early boot sequence, for example), all the writes are diectly going to RAM, bypassing the caches altogether. Once the MMU and caches are enabled, whatever sits in the cache becomes suddenly visible, which isn't what the guest expects. A way to avoid this potential disaster is to invalidate the cache when the MMU is being turned on. For this, we hook into the SCTLR_EL1 trapping code, and scan the stage-2 page tables, invalidating the pages/sections that have already been mapped in. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-03-03arm64: KVM: trap VM system registers until MMU and caches are ONMarc Zyngier
In order to be able to detect the point where the guest enables its MMU and caches, trap all the VM related system registers. Once we see the guest enabling both the MMU and the caches, we can go back to a saner mode of operation, which is to leave these registers in complete control of the guest. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-03-03arm64: KVM: allows discrimination of AArch32 sysreg accessMarc Zyngier
The current handling of AArch32 trapping is slightly less than perfect, as it is not possible (from a handler point of view) to distinguish it from an AArch64 access, nor to tell a 32bit from a 64bit access either. Fix this by introducing two additional flags: - is_aarch32: true if the access was made in AArch32 mode - is_32bit: true if is_aarch32 == true and a MCR/MRC instruction was used to perform the access (as opposed to MCRR/MRRC). This allows a handler to cover all the possible conditions in which a system register gets trapped. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
2014-02-27arm/arm64: KVM: detect CPU reset on CPU_PM_EXITMarc Zyngier
Commit 1fcf7ce0c602 (arm: kvm: implement CPU PM notifier) added support for CPU power-management, using a cpu_notifier to re-init KVM on a CPU that entered CPU idle. The code assumed that a CPU entering idle would actually be powered off, loosing its state entierely, and would then need to be reinitialized. It turns out that this is not always the case, and some HW performs CPU PM without actually killing the core. In this case, we try to reinitialize KVM while it is still live. It ends up badly, as reported by Andre Przywara (using a Calxeda Midway): [ 3.663897] Kernel panic - not syncing: unexpected prefetch abort in Hyp mode at: 0x685760 [ 3.663897] unexpected data abort in Hyp mode at: 0xc067d150 [ 3.663897] unexpected HVC/SVC trap in Hyp mode at: 0xc0901dd0 The trick here is to detect if we've been through a full re-init or not by looking at HVBAR (VBAR_EL2 on arm64). This involves implementing the backend for __hyp_get_vectors in the main KVM HYP code (rather small), and checking the return value against the default one when the CPU notifier is called on CPU_PM_EXIT. Reported-by: Andre Przywara <osp@andrep.de> Tested-by: Andre Przywara <osp@andrep.de> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Rob Herring <rob.herring@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-01-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "First round of KVM updates for 3.14; PPC parts will come next week. Nothing major here, just bugfixes all over the place. The most interesting part is the ARM guys' virtualized interrupt controller overhaul, which lets userspace get/set the state and thus enables migration of ARM VMs" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (67 commits) kvm: make KVM_MMU_AUDIT help text more readable KVM: s390: Fix memory access error detection KVM: nVMX: Update guest activity state field on L2 exits KVM: nVMX: Fix nested_run_pending on activity state HLT KVM: nVMX: Clean up handling of VMX-related MSRs KVM: nVMX: Add tracepoints for nested_vmexit and nested_vmexit_inject KVM: nVMX: Pass vmexit parameters to nested_vmx_vmexit KVM: nVMX: Leave VMX mode on clearing of feature control MSR KVM: VMX: Fix DR6 update on #DB exception KVM: SVM: Fix reading of DR6 KVM: x86: Sync DR7 on KVM_SET_DEBUGREGS add support for Hyper-V reference time counter KVM: remove useless write to vcpu->hv_clock.tsc_timestamp KVM: x86: fix tsc catchup issue with tsc scaling KVM: x86: limit PIT timer frequency KVM: x86: handle invalid root_hpa everywhere kvm: Provide kvm_vcpu_eligible_for_directed_yield() stub kvm: vfio: silence GCC warning KVM: ARM: Remove duplicate include arm/arm64: KVM: relax the requirements of VMA alignment for THP ...
2013-12-28arm64: KVM: Force undefined exception for Guest SMC intructionsAnup Patel
The SMC-based PSCI emulation for Guest is going to be very different from the in-kernel HVC-based PSCI emulation hence for now just inject undefined exception when Guest executes SMC instruction. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: marc Zyngier <marc.zyngier@arm.com>
2013-12-28arm64: KVM: Support X-Gene guest VCPU on APM X-Gene hostAnup Patel
This patch allows us to have X-Gene guest VCPU when using KVM arm64 on APM X-Gene host. We add KVM_ARM_TARGET_XGENE_POTENZA for X-Gene Potenza compatible guest VCPU and we return KVM_ARM_TARGET_XGENE_POTENZA in kvm_target_cpu() when running on X-Gene host with Potenza core. [maz: sanitized the commit log] Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-12-28arm64: KVM: Add Kconfig option for max VCPUs per-GuestAnup Patel
Current max VCPUs per-Guest is set to 4 which is preventing us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. X-Gene Storm SOC) with 8 Host CPUs. The correct value of max VCPUs per-Guest should be same as the max CPUs supported by GICv2 which is 8 but, increasing value of max VCPUs per-Guest can make things slower hence we add Kconfig option to let KVM users select appropriate max VCPUs per-Guest. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-12-19treewide: Fix typos in printkMasanari Iida
Correct spelling typo in various part of kernel Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM changes from Paolo Bonzini: "Here are the 3.13 KVM changes. There was a lot of work on the PPC side: the HV and emulation flavors can now coexist in a single kernel is probably the most interesting change from a user point of view. On the x86 side there are nested virtualization improvements and a few bugfixes. ARM got transparent huge page support, improved overcommit, and support for big endian guests. Finally, there is a new interface to connect KVM with VFIO. This helps with devices that use NoSnoop PCI transactions, letting the driver in the guest execute WBINVD instructions. This includes some nVidia cards on Windows, that fail to start without these patches and the corresponding userspace changes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (146 commits) kvm, vmx: Fix lazy FPU on nested guest arm/arm64: KVM: PSCI: propagate caller endianness to the incoming vcpu arm/arm64: KVM: MMIO support for BE guest kvm, cpuid: Fix sparse warning kvm: Delete prototype for non-existent function kvm_check_iopl kvm: Delete prototype for non-existent function complete_pio hung_task: add method to reset detector pvclock: detect watchdog reset at pvclock read kvm: optimize out smp_mb after srcu_read_unlock srcu: API for barrier after srcu read unlock KVM: remove vm mmap method KVM: IOMMU: hva align mapping page size KVM: x86: trace cpuid emulation when called from emulator KVM: emulator: cleanup decode_register_operand() a bit KVM: emulator: check rex prefix inside decode_register() KVM: x86: fix emulation of "movzbl %bpl, %eax" kvm_host: typo fix KVM: x86: emulate SAHF instruction MAINTAINERS: add tree for kvm.git Documentation/kvm: add a 00-INDEX file ...
2013-11-11Merge tag 'kvm-arm64/for-3.13-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into kvm-next A handful of fixes for KVM/arm64: - A couple a basic fixes for running BE guests on a LE host - A performance improvement for overcommitted VMs (same as the equivalent patch for ARM) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Conflicts: arch/arm/include/asm/kvm_emulate.h arch/arm64/include/asm/kvm_emulate.h
2013-11-06arm64: KVM: vgic: byteswap GICv2 access on world switch if BEMarc Zyngier
Ensure that accesses to the GICH_* registers are byteswapped when the kernel is compiled as big-endian. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-06arm64: KVM: initialize HYP mode following the kernel endiannessMarc Zyngier
Force SCTLR_EL2.EE to 1 if the kernel is compiled as BE. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-10-29arm64: KVM: Yield CPU when vcpu executes a WFEMarc Zyngier
On an (even slightly) oversubscribed system, spinlocks are quickly becoming a bottleneck, as some vcpus are spinning, waiting for a lock to be released, while the vcpu holding the lock may not be running at all. The solution is to trap blocking WFEs and tell KVM that we're now spinning. This ensures that other vpus will get a scheduling boost, allowing the lock to be released more quickly. Also, using CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT slightly improves the performance when the VM is severely overcommited. Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-10-02ARM64: KVM: Implement kvm_vcpu_preferred_target() functionAnup Patel
This patch implements kvm_vcpu_preferred_target() function for KVM ARM64 which will help us implement KVM_ARM_PREFERRED_TARGET ioctl for user space. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-08-09arm64: KVM: add missing dsb before invalidating Stage-2 TLBsMarc Zyngier
When performing a Stage-2 TLB invalidation, it is necessary to make sure the write to the page tables is observable by all CPUs. For this purpose, add dsb instructions to __kvm_tlb_flush_vmid_ipa and __kvm_flush_vm_context before doing the TLB invalidation itself. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-08-09arm64: KVM: perform save/restore of PAR_EL1Marc Zyngier
Not saving PAR_EL1 is an unfortunate oversight. If the guest performs an AT* operation and gets scheduled out before reading the result of the translation from PAREL1, it could become corrupted by another guest or the host. Saving this register is made slightly more complicated as KVM also uses it on the permission fault handling path, leading to an ugly "stash and restore" sequence. Fortunately, this is already a slow path so we don't really care. Also, Linux doesn't do any AT* operation, so Linux guests are not impacted by this bug. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-07-04arm64: KVM: Kconfig integrationMarc Zyngier
Finally plug KVM/arm64 into the config system, making it possible to enable KVM support on AArch64 CPUs. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-12arm64: KVM: enable initialization of a 32bit vcpuMarc Zyngier
Wire the init of a 32bit vcpu by allowing 32bit modes in pstate, and providing sensible defaults out of reset state. This feature is of course conditioned by the presence of 32bit capability on the physical CPU, and is checked by the KVM_CAP_ARM_EL1_32BIT capability. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit guest fault injectionMarc Zyngier
Add fault injection capability for 32bit guests. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit specific register world switchMarc Zyngier
Allow registers specific to 32bit guests to be saved/restored during the world switch. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: CPU specific 32bit coprocessor accessMarc Zyngier
Enable handling of CPU specific 32bit coprocessor access. Not much here either. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit handling of coprocessor trapsMarc Zyngier
Provide the necessary infrastructure to trap coprocessor accesses that occur when running 32bit guests. Also wire SMC and HVC trapped in 32bit mode while were at it. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit conditional execution emulationMarc Zyngier
As conditional instructions can trap on AArch32, add the thinest possible emulation layer to keep 32bit guests happy. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: 32bit GP register accessMarc Zyngier
Allow access to the 32bit register file through the usual API. Reviewed-by: Christopher Covington <cov@codeaurora.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-06-12arm64: KVM: Build system integrationMarc Zyngier
Only the Makefile is plugged in. The Kconfig stuff is in a separate patch to allow for an easier merge process. Reviewed-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 09:52:31 +0000