summaryrefslogtreecommitdiff
path: root/arch/arm64/configs
AgeCommit message (Collapse)Author
2018-01-12mtd: nand: use reworked NAND controller driver with Marvell EBU SoCsMiquel Raynal
Choose to compile and embed marvell_nand.c as NAND controller driver instead of the legacy pxa3xx_nand.c for platforms with Marvell EBU SoCs. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-10-30arm64: defconfig: enable CONFIG_GPIO_UNIPHIERMasahiro Yamada
Enable the GPIO controller driver used for UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-30Merge tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/soc Pull "mvebu arm64 for 4.15 (part 1)" from Gregory CLEMENT: For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the defconfig * tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable RTC on Armada 7K/8K SoCs arm64: defconfig: enable NAND on Armada 7K/8K SoCs arm64: defconfig: enable Marvell CP110 comphy arm64: defconfig: enable the Marvell 10G PHY as a module
2017-10-30Merge tag 'tegra-for-4.15-arm64-defconfig' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc Pull "arm64: tegra: Default configuration updates for v4.15-rc1" from Thierry Reding: This enables the PCI host controller on 64-bit ARM. It is supported and enabled via device tree on Tegra210 and Tegra186. * tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable Tegra PCI controller
2017-10-19Merge tag 'qcom-arm64-defconfig-for-4.15' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc Pull "Qualcomm ARM64 Based defconfig Updates for v4.15" from Andy Gross: * Enable QCOM IOMMU * Enable Qualcomm USB options * tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: defconfig: re-enable Qualcomm DB410c USB arm64: defconfig: Enable QCOM_IOMMU
2017-10-19Merge tag 'hisi-defconfig-for-4.15' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/soc Pull "ARM64: hisilicon: defconfig updates for 4.15" from Wei Xu: - Enable DRM_HISI_HIBMC for the D03/D05 board * tag 'hisi-defconfig-for-4.15' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: Enable hisilicon hibmc drm driver
2017-10-19arm64: defconfig: Enable QCOM_IOMMUNicolas Dechesne
Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the Dragonboard 410c. With this change, graphics console and GPU are working fine (using mesa/freedreno for GPU driver). Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-19arm64: Add ThunderX drivers to defconfigRobin Murphy
ThunderX needs its PCI host drivers to do anything useful, and it's probably helpful to have networking by default too. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-10-19arm64: defconfig: Enable Tegra PCI controllerTuomas Tynkkynen
The driver has supported the 64-bit Tegra210 for a while now, so enable it in the defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-10-16arm64: defconfig: re-enable Qualcomm DB410c USBAlex Elder
Stephen Boyd reworked some Qualcomm USB code earlier this year. The result requires a few different config options to be enabled in order for the USB on the DragonBoard 410c to continue working, but these were never added to arm64 "defconfig". As a result, USB on that board stopped working during the v4.13-rc1 merge window. Re-enable this functionality by setting the needed config options in the arm64 "defconfig" file. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-12arm64: defconfig: enable RTC on Armada 7K/8K SoCsGregory CLEMENT
The Armada 38x RTC driver supports also the RTC controller found on the Armada 7K/8K SoCs, so enable it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-10-11arm64: defconfig: Enable QCOM_IOMMUNicolas Dechesne
Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the Dragonboard 410c. With this change, graphics console and GPU are working fine (using mesa/freedreno for GPU driver). Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-10-10arm64: defconfig: Enable hisilicon hibmc drm driverKefeng Wang
Enable DRM_HISI_HIBMC as module for Hisilicon D03/D05 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-09-27arm64: defconfig: enable NAND on Armada 7K/8K SoCsGregory CLEMENT
The PXA3xx NAND driver supports also the NAND controller found on the Armada 7K/8K SoCs, so enable it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-25arm64: defconfig: enable R8A77970 SoCSergei Shtylyov
Enable the Renesas R-Car V3M (R8A77970) SoC in the ARM64 defconfig. Suggested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-20arm64: defconfig: enable Marvell CP110 comphyMiquel Raynal
The comphy is an hardware block giving access to common PHYs that can be used by various other engines (Network, SATA, ...). This is used on Marvell 7k/8k platforms for now. Enable the corresponding driver. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-20arm64: defconfig: enable the Marvell 10G PHY as a moduleAntoine Tenart
The Marvell 10G PHY is present on mvebu platforms. Enable it as a module so that the network works on these platforms. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-09-19arm64: defconfig: enable thermal driver for Renesas R-Car Gen3Wolfram Sang
We want this driver to detect critical temperatures in time. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-18arm64: defconfig: Enable Renesas R8A77995 SoCGeert Uytterhoeven
Enable support for the Renesas R-Car D3 SoC. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-09-10Merge tag 'armsoc-platforms' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM/arm64 SoC platform updates from Olof Johansson: "This branch contains platform updates for 32- and 64-bit ARM, including defconfig updates to enable new options, drivers and platforms. There are also a few fixes and cleanups for some existing vendors. Some of the things worth highlighting here are: - Enabling new crypt drivers on arm64 defconfig - QCOM IPQ8074 clocks and pinctrl drivers on arm64 defconfig - Debug support enabled for Renesas r8a7743 - Various config updates for Renesas platforms (sound, USB, other drivers) - Platform support (including SMP) for TI dra762 - OMAP cleanups: Move to use generic 8250 debug_ll, removal of stale DMA code" * tag 'armsoc-platforms' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (109 commits) ARM: multi_v7_defconfig: make eSDHC driver built-in arm64: defconfig: enable rockchip graphics MAINTAINERS: Update Cavium ThunderX2 entry ARM: config: aspeed: Add I2C, VUART, LPC Snoop ARM: configs: aspeed: Update Aspeed G4 with VMSPLIT_2G ARM: s3c24xx: Fix NAND ECC mode for mini2440 board ARM: davinci_all_defconfig: enable tinydrm and ST7586 arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl ARM: defconfig: tegra: Enable ChipIdea UDC driver ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig ARM: tegra: Add Tegra I2S interfaces to defconfig ARM: tegra: Update default configuration for v4.13-rc1 MAINTAINERS: update ARM/ZTE entry soc: versatile: remove unnecessary static in realview_soc_probe() ARM: Convert to using %pOF instead of full_name ARM: hisi: Fix typo in comment ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add CONFIG_BRCMSTB_THERMAL arm64: defconfig: add recently added crypto drivers as modules arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOG ...
2017-08-29arm64: defconfig: enable rockchip graphicsHeiko Stuebner
Enable the graphics-related options needed by Rockchip boards. This includes the pwm-backlight which will be needed by the internal displays used on Gru Chrome-devices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Mark yao <mark.yao@rock-chips.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-08-21Merge tag 'sunxi-config64-for-4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/arm64 Pull "Allwinner arm64 defconfig changes for 4.14" from Chen-Yu Tsai: Enable X-Powers AXP series PMIC mfd and regulator support by default. * tag 'sunxi-config64-for-4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: defconfig: Enable REGULATOR_AXP20X arm64: defconfig: Enable MFD_AXP20X_RSB
2017-08-19Merge tag 'qcom-arm64-defconfig-for-4.14' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/arm64 Pull "Qualcomm ARM64 Based defconfig Updates for v4.14" from Andy Gross: * Enable Qualcomm IPQ8074 clocks and pinctrl * tag 'qcom-arm64-defconfig-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrl
2017-08-18Merge tag 'arm-soc/for-4.14/defconfig-arm64' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/arm64 Pull "Broadcom defconfig-arm64 changes for 4.14" from Florian Fainelli: This pull request contains ARM64 defconfig changes for Broadcom ARM64-based SoCs for 4.14, please pull the following: - Markus enables the Broadcom STB AVS thermal monitoring driver as a module which is currently queued in Rui Zhang's tree * tag 'arm-soc/for-4.14/defconfig-arm64' of http://github.com/Broadcom/stblinux: arm64: defconfig: add CONFIG_BRCMSTB_THERMAL
2017-08-18arm64: defconfig: Enable QCOM IPQ8074 clock and pinctrlAbhishek Sahu
These configs are required for booting kernel in QCOM IPQ8074 boards. Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-08-15arm64: defconfig: add CONFIG_BRCMSTB_THERMALMarkus Mayer
Turn on CONFIG_BRCMSTB_THERMAL as module. Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2017-08-15Merge tag 'hisi-defconfig-for-4.14' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/arm64 Pull "ARM64: hisilicon: defconfig updates for 4.14" from Wei Xu: - Enable Kirin PCIe host, hi6421v530 mfd and regulator, syscon reboot mode, serdev bus, OP-TEE and K3 DMA support for hikey and hikey960 - Enable pcie based sas controller support for hip08 SoC * tag 'hisi-defconfig-for-4.14' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: enable DMA driver for hi3660 arm64: defconfig: enable OP-TEE arm64: defconfig: enable support for serial port connected device arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODE arm64: defconfig: enable support hi6421v530 PMIC arm64: defconfig: enable Kirin PCIe arm64: defconfig: enable SCSI_HISI_SAS_PCI
2017-08-15arm64: defconfig: add recently added crypto drivers as modulesArd Biesheuvel
Add the arm64 crypto drivers that have been added over the past couple of kernel releases to its defconfig as modules. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-15Merge tag 'mvebu-arm64-4.14-1' of git://git.infradead.org/linux-mvebu into ↵Arnd Bergmann
next/arm64 Pull "mvebu arm64 for 4.14 (part 1)" from Gregory CLEMENT: Enabling nop-xceiv PHY driver in the defconfig, needed for USB support on A8K SoC based board. Enabling fine-grained task level IRQ time accounting for ARMv8 as it was already done for x86 * tag 'mvebu-arm64-4.14-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable fine-grained task level IRQ time accounting arm64: defconfig: enable nop-xceiv PHY driver
2017-08-15arm64: defconfig: enable CONFIG_UNIPHIER_WATCHDOGKeiji Hayashibara
Enable the watchdog driver for UniPhier SoC Signed-off-by: Keiji Hayashibara <hayashibara.keiji@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-15Merge tag 'renesas-arm64-defconfig-for-v4.14' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.14" from Simon Horman: * compile ak4613 and renesas sound as modules This is intended to reduce the size of a kernel image compiled using the defconfig. This is timely as it brings the kernel image back below the size that can be booted in my environment, a limit it crept over in v4.13-rc1. * tag 'renesas-arm64-defconfig-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: compile ak4613 and renesas sound as modules
2017-08-15arm64: defconfig: Enable CONFIG_WQ_POWER_EFFICIENT_DEFAULTViresh Kumar
commit cee22a15052f ("workqueues: Introduce new flag WQ_POWER_EFFICIENT for power oriented workqueues") introduced the concept of power efficient workqueues (4 years back), but it was never enabled in upstream kernel configs. Power efficient workqueues are simply marked as "unbound," so that jobs queued to them can run on any CPU in the system. It leaves the target CPU selection to the scheduler, which is the best place for such decision making. This improves power efficiency for workqueues which are otherwise pinned to a CPU. Enable it for ARM64 platforms as ARM platforms were the main target for the introduction of power efficient workqueues. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-08-14arm64: defconfig: enable DMA driver for hi3660Wang Ruyi
enable DMA driver for hi3660. Signed-off-by: Wang Ruyi <wangruyi@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: enable OP-TEEVictor Chong
This patch enables configs for Trusted Execution Environment (TEE) and OP-TEE. +CONFIG_TEE=y +CONFIG_OPTEE=y Signed-off-by: Victor Chong <victor.chong@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: enable support for serial port connected deviceGuodong Xu
This patch enables these configs: +CONFIG_SERIAL_DEV_BUS=y +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y As example, a bluetooth device connected to UART port can be supported by this. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: enable CONFIG_SYSCON_REBOOT_MODEGuodong Xu
Enable CONFIG_SYSCON_REBOOT_MODE Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: enable support hi6421v530 PMICGuodong Xu
Enable configs for hi6421v530 mfd and regulator driver + CONFIG_MFD_HI6421_PMIC=y + CONFIG_REGULATOR_HI6421V530=y Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: enable Kirin PCIeXiaowei Song
Enable HiSilicon Kirin series SoCs PCIe controllers Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Xiaowei Song <songxiaowei@hisilicon.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: enable SCSI_HISI_SAS_PCIJohn Garry
Enable HiSilicon SAS controller based on PCI device, which is included in hip08 SoC. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2017-08-14arm64: defconfig: Enable REGULATOR_AXP20XJagan Teki
The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the Reduced Serial Bus (RSB). The regulators of this PMIC supply all power rails of the SoC and many external peripherals. Enable the driver for the regulators of this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-14arm64: defconfig: Enable MFD_AXP20X_RSBJagan Teki
The Allwinner A64 SoC is paired with the X-Powers AXP803 PMIC over the Reduced Serial Bus (RSB). Enable the driver for this PMIC. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [wens@csie.org: Refined commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2017-08-11arm64: defconfig: Enable CONFIG_ROCKCHIP_PHYDavid Wu
Make the rockchip PHY driver built into the kernel. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03arm64: defconfig: enable fine-grained task level IRQ time accountingMarcin Wojtas
Tests showed, that under certain conditions, the summary number of jiffies spent on softirq/idle, which are counted by system statistics can be even below 10% of expected value, resulting in false load presentation. The issue was observed on the quad-core Marvell Armada 8k SoC, whose two 10G ports were bound into L2 bridge. Load was controlled by bidirectional UDP traffic, produced by a packet generator. Under such condition, the dominant load is softirq. With 100% single CPU occupation or without any activity (all CPUs 100% idle), total number of jiffies is 10000 (2500 per each core) in 10s interval. Also with other kind of load this was true. However below a saturation threshold it was observed, that with CPU which was occupied almost by softirqs only, the statistic were awkward. See the mpstat output: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle all 0.00 0.00 0.13 0.00 0.00 0.55 0.00 0.00 0.00 99.32 0 0.00 0.00 0.00 0.00 0.00 23.08 0.00 0.00 0.00 76.92 1 0.00 0.00 0.40 0.00 0.00 0.00 0.00 0.00 0.00 99.60 2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 3 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 100.00 Above would mean basically no total load, debug CPU0 occupied in 25%. Raw statistics, printed every 10s from /proc/stat unveiled a root cause - summary idle/softirq jiffies on loaded CPU were below 200, i.e. over 90% samples lost. All problems were gone after enabling fine granulity IRQ time accounting. This patch fixes possible wrong statistics processing by enabling CONFIG_IRQ_TIME_ACCOUNTING for arm64 platfroms, which is by default done on other architectures, e.g. x86 and arm. Tests showed no noticeable performance penalty, nor stability impact. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-07-27arm64: defconfig: enable missing HWSPINLOCKGeorgi Djakov
The hardware spinlock drivers now depend on HWSPINLOCK (instead of selecting it), so we need to explicitly enable it after commit 35fc8a07d7f9 ("Make HWSPINLOCK a menuconfig to ease disabling") Without HWSPINLOCK, various drivers are left with unsatisfied dependencies and Qcom boards using shared memory based communication to request regulators are failing to boot and mount rootfs. Fix this by explicitly enabling HWSPINLOCK in defconfig. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2017-07-27arm64: defconfig: compile ak4613 and renesas sound as modulesKuninori Morimoto
Compile the renesas sound and ak4613 drivers as modules to reduce the ARM64 kernel size. These modules are currently only used by Renesas platforms so there should little risk of negative impact of this change on other users. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [simon: consolidated two patches into one] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2017-07-18arm64: defconfig: enable nop-xceiv PHY driverThomas Petazzoni
This commit enables the nop-xceiv PHY driver, which is needed for USB support to work on the MacchiatoBin platform (Marvell Armada 8K). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2017-07-04Merge tag 'armsoc-arm64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit updates from Arnd Bergmann: "Changes to platform code for 64-bit ARM platforms. Andreas Färber adds two new platforms with initial code: Realtek RTD1295 and Action Semi S900. Both are fairly similar chips, used mainly in set-top-boxes, but with other possible applications, and additional members in the respective product families that could be added in the future. The code here is fairly minimal, as all the interesting parts are in device drivers and dts files. The Broadcom Vulcan platform gets dropped, as no products ever became available, and Cavium integrated the platform under a new name. Among some other defconfig changes, Timur Tabi enables a number of options that are typically required for server platforms" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: defconfig: remove duplicate entry arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU arm64: defconfig: enable EDAC options arm64: defconfig: enable APEI and GHES features arm64: defconfig: enable support for PCIe hotplug arm64: defconfig: enable EFI_CAPSULE_LOADER arm64: defconfig: enable BLK_DEV_NVME arm64: defconfig: enable ACPI_CPPC_CPUFREQ arm64: marvell: enable ICU and GICP drivers arm64: marvell: enable the Armada 7K/8K pinctrl driver arm64: Prepare Actions Semi S900 ARM64: defconfig: enable meson SPICC as module ARM64: defconfig: enable IR core, decoders and Meson IR device arm64: defconfig: enable Simple Sound Card support arm64: defconfig: Enable ARCH_BRCMSTB arm64: defconfig: drop ARCH_VULCAN arm64: disable Broadcom Vulcan platform MAINTAINERS: Add Realtek section ARM64: Prepare Realtek RTD1295
2017-06-25arm64: defconfig: remove duplicate entryArnd Bergmann
This fixes a warning: warning: override: reassigning to symbol SPI_MESON_SPIFC Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-23arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY driversTimur Tabi
The EMAC is present on Qualcomm Technologies' server and some mobile chips, and is used as the primary Ethernet interface. Systems that have these SOCs typically have an Atheros 803x or Marvell 88e1111 PHY in them, so enable those drivers too. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-06-23arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMUTimur Tabi
Now that the drivers are available, enable support for L2 and L3 performance monitoring Qualcomm Datacenter Technologies Centriq SoCs. These PMU drivers provide support for performance optimization. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 18:11:02 +0000