summaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)Author
2019-02-15Merge tag 'imx-fixes-5.0-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.0, 3rd round: It contains a fix for i.MX8MQ EVK board device tree, which makes the broken eMMC support work as expected. * tag 'imx-fixes-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: Fix boot from eMMC
2019-02-15Merge tag 'v5.0-rockchip-dts64fixes-1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fix for new dtc graph warnings and a regulator fix for rock64. * tag 'v5.0-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64 arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavator
2019-02-01arm64: dts: imx8mq: Fix boot from eMMCCarlo Caione
The boot from eMMC is currently broken on the NXP i.MX8MQ EVK board. When trying to boot from eMMC it fails with: ... [ 1.271938] mmc1: Tuning failed, falling back to fixed sampling clock [ 1.287429] print_req_error: I/O error, dev mmcblk1, sector 1 flags 0 [ 1.306833] mmc1: Tuning failed, falling back to fixed sampling clock [ 1.322325] print_req_error: I/O error, dev mmcblk1, sector 2 flags 0 [ 1.329559] Buffer I/O error on dev mmcblk1, logical block 0, async page read [ 1.336714] mmcblk1: unable to read partition table ... The problem is the result of a partial misconfiguration of the pins and the missing assigned clock rate. Fixes: 9079aca4aacd ("arm64: add support for i.MX8M EVK board") Signed-off-by: Carlo Caione <ccaione@baylibre.com> Tested-by: Chris Spencer <christopher.spencer@sea.co.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-01-30Merge tag 'sunxi-fixes-for-5.0' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Allwinner Fixes for 5.0 A couple of device tree fixes for the 5.0 cycle: - Add missing clock-output-names for the osc24M clock on sun6i/A31 The Linux clock driver uses the device node as the clock name if the property is missing. The node name was changed in 5.0-rc1, breaking a subtle dependency in the sunxi-ng clock driver, and renders Linux unable to completely boot up. - Add alias for Ethernet controller on Beelink X2 This allows the bootloader to assign a deterministically generated MAC address to it. - Add property to enable USB VBUS regulator on OrangePi Win The board had defined the constraints for the regulator, but was missing the property to actually enable it. * tag 'sunxi-fixes-for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Fix USB OTG regulator ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2 ARM: dts: sun6i: Add clock-output-names to osc24M clock arm64: dts: allwinner: a64: Fix the video engine compatible Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30Merge tag 'amlogic-fixes-2.1' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes Amlogic fixes for v5.0-rc, round 2 - several fixups for the GPIO cd-inverted change - IRQ trigger fixes for MAC IRQ * tag 'amlogic-fixes-2.1' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: Fix mmc cd-gpios polarity ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low ARM: dts: meson8b: ec100: mark the SD card detection GPIO active-low ARM: dts: meson8b: odroidc1: mark the SD card detection GPIO active-low arm: dts: meson: Fix IRQ trigger type for macirq Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30Merge tag 'qcom-fixes-for-5.0-rc3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/fixes Qualcomm ARM64 Fixes for 5.0-rc3 * Fix irq controller compatible for the MSM8996 platforms * tag 'qcom-fixes-for-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: add msm8996 compatible to gicv3 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-30Merge tag 'renesas-fixes2-for-v5.0' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/fixes Second Round of Renesas ARM Based SoC Fixes for v5.0 Enable DMA for SCIF2 on R-Car M3-W (r8a7796) and M3-n (r8a77965), and (RZ/G2M) r8a774a1 SoCs. This is was omitted from patches enabling DMA for other SCIF devices on the same SoCs due to missing documentation. However, it is regarded as a fix as arguably those patches claim to add this feature. Per-SoC patches are provided to ease backporting of this fix as the kernel version to be fixed is different for each SoC. * tag 'renesas-fixes2-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: r8a77965: Enable DMA for SCIF2 arm64: dts: renesas: r8a7796: Enable DMA for SCIF2 arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-27arm64: dts: rockchip: enable usb-host regulators at boot on rk3328-rock64Dmitry Voytik
After commit ef05bcb60c1a, boot from USB drives is broken. Fix this problem by enabling usb-host regulators during boot time. Fixes: ef05bcb60c1a ("arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Voytik <voytikd@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-27arm64: dts: rockchip: fix graph_port warning on rk3399 bob kevin and excavatorEnric Balletbo i Serra
Ports are described by child 'port' nodes contained in the device node. 'ports' is optional and is used to group all 'port' nodes which is not the case here. This patch fixes the following warnings: arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts:25.9-29.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:46.9-50.5: Warningi (graph_port): /edp-panel/ports: graph port node name should be 'port' arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts:94.9-98.5: Warning (graph_port): /edp-panel/ports: graph port node name should be 'port' Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-01-24arm64: dts: add msm8996 compatible to gicv3Srinivas Kandagatla
Add compatible to gicv3 node to enable quirk required to restrict writing to GICR_WAKER register which is restricted on msm8996 SoC in Hypervisor. With this quirk MSM8996 can at least boot out of mainline, which can help community to work with boards based on MSM8996. Without this patch Qualcomm DB820c board reboots on mainline. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2019-01-17arm64: dts: renesas: r8a77965: Enable DMA for SCIF2Geert Uytterhoeven
SCIF2 on R-Car M3-N can be used with both DMAC1 and DMAC2. Fixes: 0ea5b2fd38db56aa ("arm64: dts: renesas: r8a77965: Add SCIF device nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-17arm64: dts: renesas: r8a7796: Enable DMA for SCIF2Geert Uytterhoeven
SCIF2 on R-Car M3-W can be used with both DMAC1 and DMAC2. Fixes: dbcae5ea4bd27409 ("arm64: dts: r8a7796: Enable SCIF DMA") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-17arm64: dts: renesas: r8a774a1: Enable DMA for SCIF2Geert Uytterhoeven
SCIF2 on RZ/G2M can be used with both DMAC1 and DMAC2. Fixes: 3a3933a4fa36430a ("arm64: dts: renesas: r8a774a1: Add SCIF and HSCIF nodes") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-14arm64: dts: meson: Fix mmc cd-gpios polarityLoys Ollivier
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high". Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property. Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2019-01-10arm64: dts: marvell: mcbin: fix PCIe reset signalBaruch Siach
The MPP52 signal is on the seconds GPIO instance of CP0, which corresponds to the &cp0_gpio2 handle. Rename the property name to the standard '-gpios' suffix while at it. Fixes: b83e1669adce6 ("arm64: dts: marvell: mcbin: add support for PCIe") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: marvell: armada-ap806: reserve PSCI areaHeinrich Schuchardt
The memory area [0x4000000-0x4200000[ is occupied by the PSCI firmware. Any attempt to access it from Linux leads to an immediate crash. So let's make the same memory reservation as the vendor kernel. [gregory: added as comment that this region matches the mainline U-boot] Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2019-01-10arm64: dts: allwinner: a64: Fix USB OTG regulatorJernej Skrabec
Currently, AXP803 driver assumes that reg_drivevbus is input which is wrong. Unfortunate consequence of that is that none of the USB ports work on the board, even USB HOST port, because USB PHY driver probing fails due to missing regulator. Fix that by adding "x-powers,drive-vbus-en" property to AXP803 node. Fixes: 14ff5d8f9151 ("arm64: dts: allwinner: a64: Orange Pi Win: Enable USB OTG socket") Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-07arm64: dts: allwinner: a64: Fix the video engine compatiblePaul Kocialkowski
When introducing the video-codec node for the video engine, the compatible for the H5 was used instead of the compatible for the A64. Use the right compatible instead. Fixes: d60ce24740d2 ("arm64: dts: allwinner: a64: Add Video Engine node") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-05Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull more ARM SoC updates from Olof Johansson: "A few updates that we merged late but are low risk for regressions for other platforms (and a few other straggling patches): - I mis-tagged the 'drivers' branch, and missed 3 patches. Merged in here. They're for a driver for the PL353 SRAM controller and a build fix for the qualcomm scm driver. - A new platform, RDA Micro RDA8810PL (Cortex-A5 w/ integrated Vivante GPU, 256MB RAM, Wifi). This includes some acked platform-specific drivers (serial, etc). This also include DTs for two boards with this SoC, OrangePi 2G and OrangePi i86. - i.MX8 is another new platform (NXP, 4x Cortex-A53 + Cortex-M4, 4K video playback offload). This is the first i.MX 64-bit SoC. - Some minor updates to Samsung boards (adding a few peripherals in DTs). - Small rework for SMP bootup on STi platforms. - A couple of TEE driver fixes. - A couple of new config options (bcm2835 thermal, Uniphier MDMAC) enabled in defconfigs" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits) ARM: multi_v7_defconfig: enable CONFIG_UNIPHIER_MDMAC arm64: defconfig: Re-enable bcm2835-thermal driver MAINTAINERS: Add entry for RDA Micro SoC architecture tty: serial: Add RDA8810PL UART driver ARM: dts: rda8810pl: Add interrupt support for UART dt-bindings: serial: Document RDA Micro UART ARM: dts: rda8810pl: Add timer support ARM: dts: Add devicetree for OrangePi i96 board ARM: dts: Add devicetree for OrangePi 2G IoT board ARM: dts: Add devicetree for RDA8810PL SoC ARM: Prepare RDA8810PL SoC dt-bindings: arm: Document RDA8810PL and reference boards dt-bindings: Add RDA Micro vendor prefix ARM: sti: remove pen_release and boot_lock arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards arm64: dts: imx8mq-evk: enable watchdog arm64: dts: imx8mq: add watchdog devices MAINTAINERS: add i.MX8 DT path to i.MX architecture arm64: add support for i.MX8M EVK board arm64: add basic DTS for i.MX8MQ ...
2018-12-31Merge tag 'armsoc-dt' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ...
2018-12-31Merge tag 'armsoc-soc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull arm SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms, but also a few more things: New SoC support this release: - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc) - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core Cleanups of various platforms: - OMAP1 ams-delta does some GPIO cleanups - Davinci removes of at24 platform data - Samsung cleans up old wakeup, PM debug and secondary core boot code - Renesas moves around config options and PM code to drivers/soc for sharing with 64-bit and more consistency - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups - SoCFPGA adds explicit selection of ARM errata and removes some unused code This also contains a few patches that I had queued up as fixes for 4.20 but didn't send in before the release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: omap2: avoid section mismatch warning ARM: tegra: avoid section mismatch warning ARM: ks8695: fix section mismatch warning ARM: pxa: avoid section mismatch warning ARM: mmp: fix pxa168_device_usb_phy use on aspenite ARM: mmp: fix timer_init calls ARM: OMAP1: fix USB configuration for device-only setups ARM: OMAP1: add MMC configuration for Palm Tungsten E ARM: imx: fix dependencies on imx7ulp ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER MAINTAINERS: add drivers/soc/amlogic/ to amlogic list ARM: imx: add initial support for imx7ulp ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: davinci: da850-evm: remove unnecessary include ...
2018-12-31Merge tag 'samsung-dt64-4.21-2' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/late Samsung DTS ARM64 changes for v4.21, part 2 Add IMEM clock controller (for Security SubSystem) and Bluetooth chip to Exynos5433 TM2(e) boards. * tag 'samsung-dt64-4.21-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Add Bluetooth chip to TM2(e) boards arm64: dts: exynos: Add IMEM clock controller to Exynos5433 arm64: dts: exynos: Add all CPUs in cooling maps arm64: dts: exynos: Update DWC3 modules on Exynos5433 SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-31Merge tag 'imx8mq-4.21' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/late i.MX8MQ device tree support for 4.21: - It contains the initial device tree support for i.MX8MQ - the first ARM64 i.MX processor. It features a quad Cortex-A53 core that operates at speeds of up to 1.3 GHz, a Cortex-M4 core for low-power processing, a DRAM controller that supports 32-bit/16-bit LPDDR4/DDR4/DDR3L memory, and hardware acceleration for 4K video playback. - A couple of patches from Baruch that add watchdog device for i.MX8MQ enable it for imx8mq-evk board. * tag 'imx8mq-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq-evk: enable watchdog arm64: dts: imx8mq: add watchdog devices MAINTAINERS: add i.MX8 DT path to i.MX architecture arm64: add support for i.MX8M EVK board arm64: add basic DTS for i.MX8MQ arm64: add basic Kconfig symbols for i.MX8 arm64: dts: ls1046a: add qdma device tree nodes arm64: dts: ls1043a: add qdma device tree nodes arm64: dts: ls1088a: Add missing dma-ranges property arm64: dts: ls1088a: Move fsl-mc node arm64: dts: fsl: Add all CPUs in cooling maps arm64: dts: Add support for NXP LS1028A SoC arm64: dts: layerscape: removed compatible string "snps,dw-pcie" arm64: dts: fsl: Add the status property disable PCIe arm64: dts: ls1012a: Add FRWY-LS1012A board support dt-bindings: Add binding for i.MX8MQ CCM arm64: dts: add LX2160AQDS board support arm64: dts: add LX2160ARDB board support arm64: dts: add QorIQ LX2160A SoC support Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-28Merge tag 'char-misc-4.21-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of char and misc driver patches for 4.21-rc1. Lots of different types of driver things in here, as this tree seems to be the "collection of various driver subsystems not big enough to have their own git tree" lately. Anyway, some highlights of the changes in here: - binderfs: is it a rule that all driver subsystems will eventually grow to have their own filesystem? Binder now has one to handle the use of it in containerized systems. This was discussed at the Plumbers conference a few months ago and knocked into mergable shape very fast by Christian Brauner. Who also has signed up to be another binder maintainer, showing a distinct lack of good judgement :) - binder updates and fixes - mei driver updates - fpga driver updates and additions - thunderbolt driver updates - soundwire driver updates - extcon driver updates - nvmem driver updates - hyper-v driver updates - coresight driver updates - pvpanic driver additions and reworking for more device support - lp driver updates. Yes really, it's _finally_ moved to the proper parallal port driver model, something I never thought I would see happen. Good stuff. - other tiny driver updates and fixes. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (116 commits) MAINTAINERS: add another Android binder maintainer intel_th: msu: Fix an off-by-one in attribute store stm class: Add a reference to the SyS-T document stm class: Fix a module refcount leak in policy creation error path char: lp: use new parport device model char: lp: properly count the lp devices char: lp: use first unused lp number while registering char: lp: detach the device when parallel port is removed char: lp: introduce list to save port number bus: qcom: remove duplicated include from qcom-ebi2.c VMCI: Use memdup_user() rather than duplicating its implementation char/rtc: Use of_node_name_eq for node name comparisons misc: mic: fix a DMA pool free failure ptp: fix an IS_ERR() vs NULL check genwqe: Fix size check binder: implement binderfs binder: fix use-after-free due to ksys_close() during fdget() bus: fsl-mc: remove duplicated include files bus: fsl-mc: explicitly define the fsl_mc_command endianness misc: ti-st: make array read_ver_cmd static, shrinks object size ...
2018-12-20Merge tag 'renesas-fixes2-for-v4.20' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Second Round of Renesas ARM Based SoC Fixes for v4.20 * R-Car D3 (r8a77995) SoC based Draak board - Correct CVBS input to allow probing of the VIN * tag 'renesas-fixes2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: dts: renesas: draak: Fix CVBS input
2018-12-20Merge tag 'sunxi-dt64-for-4.21-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner arm64 DT changes for 4.21 - round 2 Bluetooth using a Broadcom (now Cypress) chip connected to an UART on the Bananapi M64 is enabled using serdev and the updated bindings for Broadcom Bluetooth. The patch series had been sitting on the mailing lists for a month, and the driver bits were just merged on 2018/12/19. * tag 'sunxi-dt64-for-4.21-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-20Merge tag 'imx-qspi-dt-clean' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Freescale QSPI device tree cleanup for 4.21: - It contains a series from Schrempf Frieder that cleans up FSL QSPI device tree nodes. The current device trees are broken because they use an inconsistent scheme for assigning the reg properties. It becomes a problem with ongoing QSPI driver under SPI framework. So the cleanup is a preparation for new driver landing in the next cycle. * tag 'imx-qspi-dt-clean' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-20Merge tag 'am654-for-v4.21' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into next/dt AM65x DT changes for 4.21. Includes: - Pinctrl support - I2C support - ECAP PWM support - Power domain handling for UARTs - McSPI support * tag 'am654-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions arm64: dts: ti: k3-am654: Fix wakeup_uart reg address Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-20Merge tag 'zynqmp-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann
next/dt arm64: dts: zynqmp: DT changes for v5.0 - Fix node names - Fix wakeup-source - Wire ddrc - Label gpio controller (PS gpio) * tag 'zynqmp-dt-for-v5.0' of https://github.com/Xilinx/linux-xlnx: arm64: dts: zynqmp: Fix node names which contain "_" arm64: dts: zynqmp: Add missing gpio-controller to ps gpio arm64: dts: zynqmp: Add DDRC node arm64: dts: zynqmp: replace gpio-key,wakeup with wakeup-source property arm64: dts: zynqmp: Use mmc@ instead sdhci@ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-12-19arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device nodeChen-Yu Tsai
The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side identifies as BCM43430, while the Bluetooth side identifies as BCM43438. The Bluetooth side is connected to UART1 in a 4 wire configuration. Same as the WiFi side, due to being the same chip and package, DLDO2 provides overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC clock output provides the LPO low power clock at 32.768 kHz. This patch enables Bluetooth on this board, and also adds the missing LPO clock on the WiFi side. There is also a PCM connection for Bluetooth, but this is not covered here. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2018-12-18arm64: dts: mt7622: Remove un-used property for PCIeHonghui Zhang
The "num-lanes" property for PCIe is not used, remove it. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-17arm64: dts: exynos: Add Bluetooth chip to TM2(e) boardsMarek Szyprowski
TM2(e) boards have a Broadcom Bluetooth chip connected to 3rd UART port. Add a device tree node describing it and its resources (control GPIO lines and clock). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-16arm64: dts: imx8mq-evk: enable watchdogBaruch Siach
The external nWDOG signal connects to the EVK board reset circuit. Tested on the i.MX8MQ EVK rev B3. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16arm64: dts: imx8mq: add watchdog devicesBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16arm64: add support for i.MX8M EVK boardLucas Stach
This is the evaluation kit board for the i.MX8M. The current level of support yields a working console and is able to boot userspace from SD card or Network. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> (v1) Reviewed-by: Rob Herring <robh@kernel.org> (v3) Tested-by: Tested-by: Baruch Siach <baruch@tkos.co.il> (v1) Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16arm64: add basic DTS for i.MX8MQLucas Stach
This adds the basic DTS for the i.MX8MQ. For now only the following peripherals are supported: - IOMUXC (pin controller) - CCM (clock controller) - GPIO - UART - uSDHC (SD/eMMC controller) - FEC (ethernet controller) - i2c This is enough to get a very basic board support up and running. One known limitation is that the driver for the GPC interrupt controller is still missing, rendering the CPU sleep states unusable as there is nothing waking them up anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controllerFrieder Schrempf
We will move the FSL QSPI driver to the SPI framework soon. To prepare and to make sure the full buswidth is used (as it is with the current driver), let's add the right properties. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-16arm64: dts: Remove unused properties from FSL QSPI driver nodesFrieder Schrempf
The properties 'num-cs' and 'bus-num' were never read by the driver and can be removed. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-14arm64: dts: ti: k3-am654: Enable main domain McSPI0Vignesh R
Enable McSPI0 of main domain and add DT node for the SPI NOR flash connected to CS0. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: k3-am654: Add McSPI DT nodesVignesh R
There are 3 instances of McSPI in MCU domain and 4 instances in Main domain. Add DT nodes for all McSPI instances present on AM654 SoC. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: k3-am654: Populate power-domain property for UART nodesVignesh R
Populate power-domain property for UART nodes, this is required for Linux to enable UART clocks via PM calls. Without this UART instances not initialized by bootloader (like main_uart1) fails to work in Linux. Also, drop current-speed property from main_uart1 and main_uart2 nodes as these UARTs are not initialized before Linux boots up and current speed is unknown. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: k3-am654-base-board: Enable ECAP PWMVignesh R
Enable ECAP PWM which is used for LCD backlight. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: k3-am65-main: Add ECAP PWM nodeVignesh R
Add DT entry for ECAP0 PWM node present in main domain Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: k3-am654-base-board: Add I2C nodesVignesh R
Add DT entries for I2C instances present in AM654 SoC. Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: am654-base-board: Add pinmux for main uart0Vignesh R
Add pinmux for main uart0 that is serves as console on AM654 EVM Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-12-14arm64: dts: ti: k3-am65: Add pinctrl regionsTero Kristo
Add pinctrl regions for the main and wkup mmr. The range for main pinctrl region contains a gap at offset 0x2e4, and because of this, the pinctrl range is split into two sections. Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Vignesh R <vigneshr@ti.com> Acked-by: Nishanth Menon <nm@ti.com>
2018-12-13arm64: dts: exynos: Add IMEM clock controller to Exynos5433Kamil Konieczny
Add node for IMEM clock controller, necessary for Security SubSystem (SSS) on Exynos5433. Signed-off-by: Kamil Konieczny <k.konieczny@partner.samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-13arm64: dts: renesas: draak: Fix CVBS inputLaurent Pinchart
A typo in the adv7180 DT node prevents successful probing of the VIN. Fix it. Fixes: 6a0942c20f5c ("arm64: dts: renesas: draak: Describe CVBS input") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-12Merge tag 'amlogic-dt64-2-redo' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt arm64: dts: Amlogic updates for v4.21, round2 Highlights: - fix IRQ trigger type - AXG: enable GPIO IRQs, PHY IRQ, watchdog * tag 'amlogic-dt64-2-redo' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: Fix IRQ trigger type for macirq arm64: dts: meson-axg: Enable GPIO interrupt controller arm64: dts: meson-axg: s400: Enable PHY interrupt arm64: dts: meson: add clock controller clock inputs dt-bindings: clk: meson: add main controller clock input dt-bindings: clk: meson: add ao controller clock inputs arm64: dts: meson-axg: remove alternate xtal arm64: dts: meson-axg: Enable watchdog on Meson AXG SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 12:34:17 +0000